MDT 2013 The source directory does not contain an identifiable operating system

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.
This is expected behavior because Server 2008 is unsupported in MDT 2013:
http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Source not found: The source attachment does not contain the source........

Source not found: The source attachment does not contain the source for the file ClassLoader.Class
Hey,
I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
Thanks in advance for your thoughts,
Struggling to Run

Ok...after I thought everything was going well enough.... problems are arising.
Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
with the two environments installed i thought i was ready fro the next step.
I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
1___________
java.lang.NoClassDefFoundError: couponCounter/CouponCounter
Exception in thread "main"
2__________
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
     Syntax error, insert "}" to complete ClassBody
     at BensCalculator.main(BensCalculator.java:112)
Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
Thank you

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Distribution manager failed to process package - the source directory does not exist

Hi,
I have the following behaviour:
A Software Update Deployment Package is not distributing because of the following error:
I have found the following query (http://blogs.technet.com/b/ken_brumfield/archive/2013/01/10/troubleshooting-sccm-software-update-deployment-package-distribution-due-to-missing-directories.aspx) to
determine which update is missing.
It is about update KB978601. If we search this update in the console, we see this:
The update is not required, not downloaded, not deployed and superseeded.
If we look into the members of the Update deployment package, we can't find this update.
When I was digging into the database, I found this:
SELECT
distinct cp.Content_ID,
cp.ContentSubFolder,cp.PkgID,
con.ContentProvisioned
FROM
[dbo].[vCI_ContentPackages] cp
INNER
JOIN [dbo].[CI_ConfigurationItemContents]cic
ON cp.Content_ID
= cic.Content_ID
inner
join dbo.v_CIContents_All
con on con.Content_ID
= cp.Content_ID
where cp.PkgID
=
'XXX002BA'
and cp.ContentSubFolder
=
'39b46f0a-7244-48a6-b795-119ac74009f9'
which resulted in:
Content_ID ContentSubFolder PkgID ContentProvisioned
16828355 39b46f0a-7244-48a6-b795-119ac74009f9 BP1002BA 1
I found the "ContentProvisioned = 1 " a little bit strange.
So, my question is:
Why SCCM is thinking of distributing the content although it is not downloaded or deployed and how can we fix this?
Has it something todo with the "ContentProvisioned" or is it something else?
Thanks,
Sem

I can tell you why CM wants to distribute it, but the easiest way would be downloading that patch thus adding it to the package (so that it can be distributed) and remove it afterwards.
Torsten Meringer | http://www.mssccmfaq.de

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Flash Builder 4.7 - AIR SDK 3.1: Directory does not contain a AIR SDK

Im still having issues with using AIR 3.1 with flash builder 4.7 (see my previous posts) and would appreciate any help/ advice.
Ive uninstalled FB 4.7, reinstalled and followed the procedure to overlay AIR 3.1. Im now getting the following error -
AIR SDK 3.1: Directory does not contain a AIR SDK
Reason for using AIR 3.1 is that all of my projects are built with AIR 3.1 and no longer work with FB 4.7.

Can anyone from adobe help with this please?

HTML email is saved, the PR_RTF_COMPRESSED property does not contain embedded HTML

Hi
When HTML email is saved, the PR_RTF_COMPRESSED property does not contain embedded HTML.
This causes that Outlook does not open saved message as HTML message.
When MAPI profile is configured with CACHE mode ON, the PR_RTF_PROPERTY contains embedded HTML
and Outlook opens saved email correctly as HTML.
Do you have any idea what can cause such behavior or how to configure MAPI profile to save embedded HTML into PR_RTF_COMPRESSED when CACHE mode is OFF? If you need more information let me know.
Environment description:
Server: Exchange 2013
Client: Outlook 2013
MAPI profile configured with CACHE mode OFF
Thanks you very much for any advice.

This is bug in Exchange 2013 see
http://support.microsoft.com/kb/2862739/EN-US and also
http://social.technet.microsoft.com/Forums/en-US/58f00a26-e20b-4e1c-9790-9969ab423b2f/move-message-with-attachment-from-one-mailbox-to-another-problem
Currently there is no fix for this and the only workaround is to use Cache Mode. This only affects Exchange 2013 and Office365 (which is on 2013)
Cheers
Glen

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support

Input File repository server Error: The requested directory does not exist.

Hi,
Getting following error "The requested directory does not exist." for Input and Out put file repository server.
The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
Thanks,
Manpreet

@Siva,
I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
this was working prior to the Windows AD setup tried by me.

Deploying custom page to MDS respository: The root directory does not exist

Hi,
with XMLImport, I have
java oracle.jrad.tools.xml.importer.XMLImporter /u01/jdevhomes/sjallerat/jdevhome/myprojects/technip/oracle/apps/xxepc/deploying/webui -jdk13 -mmddir "/u01/jdevhomes/sjallerat/jdevhome/myhtml/OA_HTML/jrad" -username apps -password venus -rootdir /u01/jdevhomes/sjallerat/jdevhome/myprojects -validate -dbconnection "(description = (address_list = ( address =(protocol = tcp)(host = xxxxxxxxxxxxxxxxx)(port = xxxx)))(connect_data = (sid = xxxx)))"
Importing /technip/oracle/apps/xxXXX/deploying/webui/EpcTestMessagesPG
Error: The root directory does not exist.
xxXXX is new. With existing app, add one module .xml is OK.
Thank you for yor help.
Serge

We have registered XXYYY as a new application in our instance of oracle application with a basepath = XXYYY_TOP.
And add in Linux's file xxxxxx.env the declaration : XXYYY_TOP with rootpath = /xxxxxxx/oracle/xxxappl/XXYYY/11.5.0.
Let us must be made another statement in another file?
Thank you.

The Specified Directory Does not Exist

Hi expert
could you help me with my problem , this word " The Specified Directory Does Not Exist" its some stupid question , isn't it ?
this is my sitiuation :
1. BPC version is SAP BPC 5.0.512
2. we are using MS Excel 2003
our user do some modification from BPC WEB (the BPC open excel file with many macro and add-in etc ... ), then user save using Save Dynamic Template sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
the questions Are .
1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server
2. Could anyone help me how to resolve the problem ?
(i am appolagize with my bad english )
thanks.

HI nvsleman ,
I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
Hope this helps
Sabine

MDT 2013 The source directory does not contain an identifiable operating system

Similar Messages

Maybe you are looking for