MDT deployment status notification via email

I'm trying to build a solution that sends an email report after every deployment. Atm I have orchestrator runbook executed after deployment that sends a detailed report via email (Computer name, serial, make, model etc.). This works very well (btw. Orchestrator
is an awesome product!).
At the end of the task sequence MDT wizard shows how the deployment went (success, error, warnings)
What I dont know is how could I pass that same information to Orchestrator that MDT wizard shows after deployment. Any ideas?

Basically the solution mentioned with Henrik does that, but not in the way you would like it to do.
The bdd.log is copied along the e-mail as attachment, and when you look at incorporating this solution, you can work with task sequence variables.
So if you are able to retrieve ERROR and WARNING succes codes from the BDD.log and summarize those into the e-mail, you've got what you want.
On the other hand, when using MDT all your production deployment's should equally succeed or fail. Using this for testing purposes doesn't make sense.
So have a look at the posted solution, look in-depth to the scripts provided with the solution, and see if you can make it fit!
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards

Similar Messages

  • One PM wants to be able to have notifications (via email) for any timesheet approvals etc.

    One PM wants to be able to have notifications (via email) for any timesheet approvals requests /changes etc. But the other PMs do not want notifications via email, can i set this up for one PM only or is it set by group only?

    Unfortunately as Sachin stated, there is no easy (meaning by configuration) way to send email alert for timesheet.
    Another way would be to create a SSRS report and send it by email using the
    out of the box subscription feature of SSRS.
    http://msdn.microsoft.com/en-us/library/ms160334(v=sql.105).aspx
    Please also refer to this similar thread:
    http://social.technet.microsoft.com/Forums/projectserver/en-US/a2112387-8f29-40de-a6a7-692a94d7715f/mail-alerts-with-attachments-in-project-server-2010?forum=projectserver2010general
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Notification via eMail and/or worklist

    Hi everyone,
    We have a requirement that some notifications will need to be send via eMail and worklist and other notification should only be thru worklist only.
    e.g.,
    Notification FYI - eMail and Worklist
    Notification Approval - Worklist only
    Is there a document or a way to do the such thing?
    Thanks and Regards
    elmer

    Hi,
    If they are in separate item types, then I would create a new mailer, specifying the name of the item type as the correlation ID. That way the mailer will only send emails for that one item type. You will need to disable the standard mailer, otherwise that will email everything.
    The disadvantage of this approach is that you will need to have multiple mailers if you want to email from different item types - there is no way to include multiple correlations in the mailer configuration (e.g. you can't run a mailer for APINV and POAPPRV item types).
    A trigger would still do the job - you could automatically set the mail status for the notification to SENT as soon as the notification is created. If you are going this route, I would write a function that is invoked from the trigger to determine whether the notification should be emailed or not. That way, as more item types are used, you can easily modify the code in the function to determine whether to send the notification or not. I would even have a separate table / value set which can be checked, which contains a list of item types and / or processes which should not be emailed and have the code check that - if you add more conditions, then it's just an extra record in that table / set.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • File notification via email & font probs

    Think i'm in the right place,
    On a server I've recently been placed to "correct" issues on, I have 2 problems.
    Main prob is when accessing the server from an xterm box (not directly), typing into a terminal or console, the spacing between letters is very odd (as in to much space or no space etc) and seems to be affected by how fast you type (never seen this before). Even if you type slow, it comes out even but still spaced apart. Funny part is anything you get back as in responses to commands, is correctly spaced and looks normal. What is wrong??
    2nd thing is, is there a way that if a particular file appears in a particular directory due to an ftp transfer, that it notifies user(s) via email?
    If wrong place to ask this, I appologize... ALL Help is appreciated! :o)
    ~JJ

    plz some one reply the solution for this

  • Subscribe and Notification via email

    We would like to use to subscribe mechanism in Oracle Portal. Instead of displaying the new items in a portlet, we wish to notifiy daily via email.
    Has somebody done something similar and can provide the source code?
    regards, André

    Hi, André
    We have the same case, but I have no solution for the moment.
    I think I'll use a triger on the table portal.wwv_things, but it will be difficult to put a filter on the right items.
    Best Regards
    Estelle

  • Why is iCal sending event notifications via email?!!

    My wife and I subscribe to each other's ical calendars via iCloud and it's been working fine since first set up months ago. Suddenly today, she got a ton of emails after I updated and added a bunch of events in my calendar. This hasn't happened before today. Neither of us changed anything and I know I made similar updates in my calendar earlier in the week that didn't generate emails to her.

    as i wrote there Re: How do you stop receiving notifications about updated calendar events?:
    to NOT get email notification about updated events from a shared calendar you subscribed to you have to uncheck "events affect availability" in that calendars "info" (mac os X.7 and X.8: iCal —> calendars dropdown —> right click on the subscribed calendar —> choose "get info" from the context-menu —> uncheck "events affect availability")

  • Event Notification via Email

    hey guys,
    i've installed 9.2.0.1 and patched it to 9.2.0.4 on Fedora Core 1. i've been trying to get the email notification from OMS to work. i've verified that SMTP gateway is working fine and have successfully sent a test notification. events that test nodes, such as disk full or swap full, are able to send an email, but tests on the database, such as tablespace full or maximum extents, don't seem to send any notification. i've been adding values into a table via sqlplus until it starts getting ORA-01653: unable to extend table <user>.<table> by 256 in tablespace <tablespace>.
    any ideas what i haven't configured properly?

    Hi.
    Sorry bout the delay. I had a similar problem on 8i with EM, I could do tests on everything except actuall database issues. And all events was registered correctly. In my case, the problem was the dbsnmp user. The user had been given a password that varied from dbsnmp(default password). Maybe you should try control the connectivity between the different nodes and that the acent is working correctly. Also try enabling tracing the agent from the %ORACLE_HOME%\network\admin\snmp_rw.ora.
    Rgds
    Kjell Ove

  • Vendor Payment notification via email

    The requirement is to automate the vendor payment. Right now using T-code F-51 & F110 for vendor payment(document types are BV & KZ).
    As soon as payment has been made in a particular vendor account. A email should be sent directly to vendor. The email address will be maintained in Vendor master.
    I want this to be automated.Can anyone help on this.
    Thanks
    anu

    Seached on other forums & got the solution as Business event for this activity exist.
    the steps are
    Step 1- Define Std communication method as SMTP (Internet mail) in vendor master 
    Step 2 – Maintain email address via FK02.
    Step 3 - T-Code BERP – Code to find Find event 00002040 – This is a Function called SAMPLE_PROCESS_00002040, copy with another name i.e. ZSAMPLE_PROCESS_00002040
    Step 4 – T-Code FIBF -> Option -> Product ->a Customer, Write product name at your choice (for example ZMAIL) and make it active.
    Step 5 – T-Code FIBIF -> Option ->Process Function (or Module) ->. A Customer.
    Process = 00002040
    Module Function = ZSAMPLE_PROCESS_00002040
    Product = ZMAIL (name of product define by you in step 4)
    it will automatically send mail to vendor provided SCOT is configured.

  • How to send notification via email

    As we know, there is one step type "Sent Mail" in the workflow builder. However, the notification can only be sent to business workplace.  Any one knows how to let sap automatically send the notificatfion to both business workplace and email box of the user.

    If the SAP User Id is maintained with a valid email address in SU01d transaction and everything is properly configured in SCOT then you will receive mail on both Workplace and email inbox provided you are using SAP User Id as an agent assignment.
    Thanks
    Arghadip

  • Receiving Notifications via email

    I have a user who is not receiving an email notification when a requisition is forwarded to her for approval. Can anyone tell me what could be wrong?

    Hi,
    - Check Mailer Notification is working properly? Else tell to ur DBA to check Mail Server.
    - Check Mailer Notification Request is running properly from system administrator module...
    - Check whether data is populated in the wf_notification table for that particular requisition_header_id and mail is not sent to the respective person in hierarchy. If that is the case then there is definitely the problem in Mail Server , need to review whole settings there.
    For any details, feel free to ask.
    Regards,
    Parag
    9422340910

  • IPS Sensor - Event Notification via Email?

    Good day all.
    I have been asked to re-create some functionality that was lost after the customer upgraded from VMS to CSM but without CS-MARS or any other event monitor. The user had the system set to generate an email when an event was fired. It apparently was noisy in the begining but after tuning was not a bad solution. No one knows how it was originally set up but I can only assume it was the method described in the Cisco document at: http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps4077/products_configuration_example09186a00801fc770.shtml#fivesensor
    Now, however, since the CSM does not recieve event data is it possible to recreate this 'notification' process?
    The are using CSM 3.02 and the Sensors are still at 5.14. The Sensors will be updated to 5.17 later today. I will then either be upgrading the customer to the latest revisions and service packs for CSM or rolling them back to VMS depending on whether I can get the notifications to work with CSM.
    NOTE: They are ordering a CS-MARS appliance with the belief that it will resolve the issue but as last word it will be several months at least before they could get it in. I am concerned that CS-MARS will NOT give them back this functionality. Can anyone confirm/deny?
    Lastly - Since CSM does not include a Security Monitor like VMS did, and CS-MARS does not really recreate that sort of view or management of the events - what solution(s) are there to replicate the Security Monitor functionality? Is there? Is CS-MARS the new bully on the block?

    Since customer is staying at a 5.1(x) version then you have 3 options:
    1) downgrade to VMS and continue using Security Monitor
    2) Stay with CSM and purchase CS-MARS for the event monitoring. CS-MARS should provide email notification capability.
    3) Stay with CSM and install and use IEV 5.2(1).
    IEV 5.2(1) can either be installed on a separate machine from CSM as a standalone utility:
    http://www.cisco.com/cgi-bin/tablebuild.pl/ips-ev
    IEV 5.2(1) contains the new feature for email notification for alerts.
    OR IEV 5.2(1) can be installed as part of the CSM installation (I know it is in CSM 3.1, but not sure about earlier CSM versions).
    Here is some documentation on running IEV 5.2(1) within the CSM framework:
    http://www.cisco.com/en/US/partner/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/monidiag.html#wp1203768
    NOTE: IEV 5.2(1) is targeted for use in networks with 5 or less sensors. When running with 5 or more sensors then CS-MARS would be the recommened veiwer.
    When the user later upgrades to version 6.x, then option 1 (downgrading to VMS) is no longer an option and either option 2 or 3 would be required.

  • CPS job status alert via email

    Dear All,
    We are using Build: M28.20-37214 CPS version.
    So far we are able to get email alert from CPS when any job reaches any final (completed, error, canceled) status.
    However in our email alert template we also want to include the date and time when the particular job reached that status.
    We have created a new parameter "Time.now" in the Step 2 (email alert program).
    In the email template we have used a statement as below.
    <p>The job reached this status at : ${Time.now:"EEE-dd-MM-yy"}</p>
    As per my understanding this paramaeter should be dynamic and should take value at runtime.
    Hence in parameter definition we have used  Direction - Out.
    By doing all these configuration steps we are still not getting desired results.
    Our expected result is as below.
    The job reached this status at : WED-03-11-10.
    Any suggestions , any inputs will be highly appreciated.
    Regards,
    Jay

    Hi   Jha
    Thank you for your question.
    You can refer to the following link and modify some code to type the correct email address by which someone was reminded, but it just reminded when your database fail .
    http://ammarhasayen.com/2013/10/01/get-alert-email-when-exchange-database-is-failed-orand-not-mounted-on-the-preferred-server-activation-preference/
    If this script cannot meet your requirement and you to get some alert when database moved, you can post your requirement on Exchange Development Forum by the following link:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=exchangesvrdevelopment&filter=alltypes&sort=lastpostdesc
    If there are any questions, please let me know.
    Best Regard,
    Jim

  • HT201493 How do I de-unsubscribe notifications via email?

    Hello,
    I was having some trouble with my friends requests to follow me on Find My Friends. Turns out that I was getting  the notification only by email, and not on the actual app. But the email that is registered is my Gmail account, so when I tapped "see request" I got nothing. So, I thought that the option to rececive these requests by email was the problem, thus I chosen to unsubscribe and not get any emails from Find My Friends, didn't solve my problem. So I tried another solution, I forwarded the email to my account on Yahoo that is logged on the native email app from apple and it worked! So now I really want to de-unsubscribe but I don't know how to do it! Tnks!

    Yahoo servers have been having problems lately
    Longstanding, chronic problems actually.  It's rare that Yahoo push works for 3 consecutive days, going back 3 years!

  • Error Notification via email

    I am trying to implement a robust email notification using a procedure and variables. It seems that when I use variables, I end up with errors (Invalid parameter usually). Here are two samples of code. One works, one does not...
    Working
    command:
    OdiSendMail "-MAILHOST=mail.xxxx.com" "-FROM=[email protected]" "-SUBJECT=ODI Failure" "-TO=[email protected]"
    ODI Session failed, please investigate!
    Not Working ! Note,
    command:
    OdiSendMail "-MAILHOST=#HOST_SERVER" "-FROM=#FROM_EMAIL" "-SUBJECT=ODI Failure" "-TO=#TO_EMAIL"
    #Logger_Check_Job_Run
    Note, there are 4 parameters in the second example. I have tried substituting all the variables until all are hardcoded, and once all hardcoded, then it works. The order in which I substitute does not matter.
    The #Logger_Check_Job_Run variable is the results of a query. The other variables have a hard coded value for now.
    Any help or tips are greatly appreciated.
    Scott

    Hello,
    sorry for breaking into your discussion.
    Try to do this:
    1) declare MAIL_SERVER variable
    2) declare ODI_ADMIN_EMAIL variable
    3) declare LOGGER_CHECK_JOB variable
    3-5) set values to all variables
    6) call procedure:
    Jython, just single step with ignore errors flag set to yes
    l = 'MAIL_SERVER = '+ '#MAIL_SERVER' + 'ODI_ADMIN_EMAIL = '+ '#ODI_ADMIN_EMAIL' + 'LOGGER_CHECK_JOB = '+ '#LOGGER_CHECK_JOB'
    raise(l)
    7) call your procedure
    !!! check that you set the step 1) as the first step in the package !!!
    Using the step 6) you can check if the variables have values that you expect. Try to "debug" and let us know if it helped.
    BR
    Antonin

  • Create Notification via Email(java-mail) for task creation

    Hello. We are EP6 SP11 and our business is asking for a notification to be sent to the person responsible when a task is created. I know that there are a lot of custom solutions that I can pursue however was wondering if anyone had any experience.
    Thanks in advance for any advice.
    Best Regards,
    Pete

    Hello,
    sorry for breaking into your discussion.
    Try to do this:
    1) declare MAIL_SERVER variable
    2) declare ODI_ADMIN_EMAIL variable
    3) declare LOGGER_CHECK_JOB variable
    3-5) set values to all variables
    6) call procedure:
    Jython, just single step with ignore errors flag set to yes
    l = 'MAIL_SERVER = '+ '#MAIL_SERVER' + 'ODI_ADMIN_EMAIL = '+ '#ODI_ADMIN_EMAIL' + 'LOGGER_CHECK_JOB = '+ '#LOGGER_CHECK_JOB'
    raise(l)
    7) call your procedure
    !!! check that you set the step 1) as the first step in the package !!!
    Using the step 6) you can check if the variables have values that you expect. Try to "debug" and let us know if it helped.
    BR
    Antonin

Maybe you are looking for