MDT install completes but with errors

I'm having an issue with a MDT 2012 image completing 100% successfully. Everything installs and I get into Windows, but when it finishes it fails with 8 errors.  See picture below:
I'm confused about what's happening and why.  What I did was create a VM with everything in the image I want.  I then ran a Sysprep and Capture Task Sequence on the VM.  I basically followed this guys step-by-step procedure:
http://bjtechnews.org/2013/08/29/mdt-2012-sysprep-and-capturing-basics-livestream-september-1st/
The good thing is that the image does install, the computer joins the domain, and everything seems to be okay.  The bad thing is that I get those errors and I don't understand why.  I believe that, among other things, it's saying the sysprep
couldn't be completed, but my question is what sysprep?
Ugh, I'm so confused...
Any help would be greatly appreciated.

So here's where I'm stuck now. I know Audit Mode is what
I want to use but I can’t get it working for me at all. I can get the system into Audit Mode so I can install stuff, uninstall stuff, set certain settings the way I want, etc., but I can’t seem to end Audit Mode.
Here’s what I’ve done. I’ve run Sysprep and have chosen the Enter System Audit Mode option with Reboot being the
other choice. I click OK and it eventually reboots and I’m in Audit Mode. Great. I’m able to do everything I want to do, but then the question is how do I end Audit Mode?
One way I read to do this was to run Sysprep again and choose the option “Enter System Out-of-Box Experience”,
select Generalize since I want to use this image on various different systems, and shutdown from the Shutdown Options.
I tried that but got the same result – none of my settings were in place. The only other option I’ve seen for getting
out of Audit Mode is to edit the registry.
How do you do it? I’m completely lost on this one.

Similar Messages

  • I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad.

    I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated

    Hello jaybearden,
    Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • TS3694 My iPad-2 went itself to restore mode and did't complete it with error 3194. Whan can I do?

    My iPad-2 went itself to restore mode and did't complete it with error 3194. Whan can I do?

    Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • WAD error: done , but with errors on page!

    Hi,
    when i try to display query on web, it is displaying a partial report with almost no data on the page and right at the bottom  i could see the message
    "Done, but with errors on page"
    what can be done to remove this error?
    Thanks,
    Ravi

    hi Ravi,
    try to click the error message, see if it will pop up more detail message.
    as mentioned, seems you use some javascript in your web template,
    see the detail message and check your javascript code,
    it can be object not define etc, please note that it's case sensitive,
    so e.g if you use object/variable or call function, check it's exactly same.
    hope this helps.

  • Done, but with errors on page.?

    Hi there,
    I was wondering if someone can help me?.
    I built a site http://www.pawsofeskbank.co.uk/ i had problems with the "£", every time i used the £ it came up with "Ã" i replaced the "£" with "£" this worked great, but now when up open the site at the bottom of the browser it says "Done, but with errors on page.?". I open the details and it says "invalid Charter" line 80 and so on but i have no idea how i get ride of this???
    Can anyone point me in the right direction, Cheers

    Cheers mate,
    Much appreciated, its been driving me nuts for a week…is there any way I could spot that sort of thing if it happens again?
    Cheers

  • Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

    Try to disable your anti-virus software temporarily to see if that makes it work.
    You may need to delete the temp folder (%TEMP%) to remove the old files.

  • Session completed successfully with errors reported in error tables.

    Which table would contain the errors for this error message?
    "Session completed successfully with errors reported in error tables."
    The Snp_Exp_Txt table?
    Edited by: user8702914 on Mar 2, 2011 11:28 AM

    Sutirtha,
    The FLOW_CONTROL option must be set to 'Yes', as it is the CKM that creates and populates the E$ table. If it was set to 'No' there would not be any 'errors reported in error table' as the error table would not exist.
    Cheers
    Bos

  • So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

    So I was updating  iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

    Are you following these instructions?
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

    Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

    Did you partition and format the flash drive first? See the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • AIR won't install after Yosemite with Error "Installer Damaged"

    Error message ""Adobe AIR Application Installer" is damaged and can't be opened"
    I've uninstalled previous versions,using uninstaller, removed all incidents of AIR files, and my computer is not connected to another Hard Drive or Time Machine. Does anyone know an answer to this?  Thanks.
    here's the log file
    Oct 29 07:57:05 Jeremys-Airmac-2 kernel[0]: hfs: mounted Adobe AIR on device disk2s1
    Oct 29 07:57:05 Jeremys-Airmac-2.local mds[32]: (Volume.Normal:2464) volume:0x7faf54078800 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Adobe AIR
    Oct 29 07:57:16 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Runtime Installer begin with version 15.0.0.293 on Mac OS 10.10.0 x86
    Oct 29 07:57:16 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Commandline is: -psn_0_344148
    Oct 29 07:57:16 Jeremys-Airmac-2.local Adobe AIR Installer[583]: No installed runtime detected
    Oct 29 07:57:17 Jeremys-Airmac-2.local Adobe AIR Installer[583]: The function ‘CGFontSetShouldUseMulticache’ is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
    Oct 29 07:57:20 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Relaunching with elevation
    Oct 29 07:57:20 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Launching subprocess with commandline /Volumes/Adobe AIR/Adobe AIR Installer.app -ei
    Oct 29 07:57:25 Jeremys-Airmac-2.local authexec[588]: executing /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Runtime Installer begin with version 15.0.0.293 on Mac OS 10.10.0 x86
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Commandline is: -ei
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: No installed runtime detected
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /bin/chmod -fRP +rw "/Library/Application Support/Adobe"
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /usr/sbin/chown -hfRP jeremy "/Users/jeremy/Library/Application Support/Adobe"
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /bin/chmod -fRP +rw "/Users/jeremy/Library/Application Support/Adobe"
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /usr/sbin/chown -hfRP jeremy "/Users/jeremy/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin"
    Oct 29 07:57:25 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Starting silent runtime install. Installing runtime version 15.0.0.293
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Registering /Applications/Utilities/Adobe AIR Application Installer.app/Contents/Info.plist
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Library/Frameworks/Adobe AIR.framework"
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Subprocess chown succeeded
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Applications/Utilities/Adobe AIR Application Installer.app"
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Subprocess chown succeeded
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Launching subprocess with commandline /usr/sbin/chown -hfRP root:wheel "/Applications/Utilities/Adobe AIR Uninstaller.app"
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Subprocess chown succeeded
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[588]: Runtime Installer end with exit code 0
    Oct 29 07:57:28 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Elevated install completed
    Oct 29 07:57:33 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -installupdatecheck
    Oct 29 07:57:33 Jeremys-Airmac-2.local Adobe AIR Installer[583]: Runtime Installer end with exit code 0
    Oct 29 07:57:34 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Runtime Installer begin with version 15.0.0.293 on Mac OS 10.10.0 x86
    Oct 29 07:57:34 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Commandline is: -installupdatecheck
    Oct 29 07:57:34 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Installed runtime (15.0.0.293) located at /Library/Frameworks/Adobe AIR.framework
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Performing pingback request
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Pingback request completed with HTTP status 200
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Starting runtime background update check
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Begin Background update download from http://airdownload.adobe.com/air/3/background/macos/x86/patch/15.0.0.293/update
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Unpackaging http://airdownload.adobe.com/air/3/background/macos/x86/patch/15.0.0.293/update to /Users/jeremy/Library/Application Support/Adobe/AIR/Updater/Background
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Runtime update not available
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Unpackaging cancelled
    Oct 29 07:57:35 Jeremys-Airmac-2.local Adobe AIR Installer[600]: Runtime Installer end with exit code 0
    Oct 29 07:58:36 Jeremys-Airmac-2 kernel[0]: proc 617: load code signature error 4 for file "Adobe AIR Application Installer"
    Oct 29 07:58:36 Jeremys-Airmac-2.local amfid[254]: /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer signature not valid: 0xfffefa2a
    Oct 29 07:58:49 Jeremys-Airmac-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.oneshot.0x1000000f.Adobe AIR Application Installer[617]): Service exited due to signal: Killed: 9

    Alright y'all (jklawmd, Supritha Papannajklawmd, and anyone else having this issue),
         I was having this same exact issue, and I actually referred to your post hoping for a fix (that I obviously did not find), however, I did discover a work around!!! I use "Adobe AIR" for my "Pandora One Desktop Application", but every time I opened the installer for "Pandora One" it gave me the same exact error. Here is what I did to fix it (Hoping it helps y'all too):
    BEFORE starting ensure that the "AIR Program" that you want to install is downloaded and located in your "Downloads" folder
    Uninstall "Adobe AIR" using the included uninstaller (Navigate to your "Utilities" folder in a "New Finder Window" in order to find this, once you're there you can't miss it)
    Delete all previous "Adobe AIR" downloads
    Download a new "Adobe AIR" Installer from "Adobe" (Sounds redundant I know, but bear with me)
    Install "Adobe AIR" using the most recent download
    VERY IMPORTANT: DO NOT ATTEMPT TO INSTALL THE "AIR PROGRAM" YET
    Once the "Adobe AIR" Installation is complete navigate to "File" and select "New Finder Window"
    Once there select the "Applications" folder from the menu bar on the left of the window (Should be under "Favorites")
    Navigate to your "Utilities" Folder (Again)
    Locate the icon for "Adobe AIR Application Installer" and open it; This will open a new window
    Once the new window is open, navigate to your "Downloads" folder and locate the "AIR Program" that you want to install select the "AIR Program" and click "Open" (Bottom right hand corner)
    TaDa!!!
    Following those steps should culminate in the initialization of the install process for the program that you weren't able to install before, and from there it is business as usual (selecting and answering to the necessary install prompts for the "AIR Program"). It seems like there is a glitch somewhere between "Yosemite" and "Adobe AIR" that prevents the "Adobe AIR Application Installer" from auto-running properly when you try to open the sub-program. However, initializing the "Adobe AIR Application Installer" FIRST allows it to get up and running before the sub-program communicates with it. This fixed it for me right away, please let me know whether it works for your specific "Adobe AIR"/"AIR Program" set, if not I will download your "AIR Program" and see if I can't find another way. Also, has anyone contacted either Adobe Support or Apple Support directly with this yet??
    I hope this helps, personally, I don't know where I would be without my "Pandora One Desktop Application"!!!

  • I am trying to use apple configurator with ipads. I have been successful with all our ipads but 1. It will not allow me to add apps. The error I get is that it is refreshed but with errors e

    I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either

    Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
    Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
    I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile.

  • Installed correctly but getting error messages

    I have followed the installation instructions and the program seems to be installed correctly but on some webpages I get error messages on popups.  At first I thought it might just be the website, but they pop up on other sites as well.  I grabbed a screen cap but I don't see that I can attach files herewith.
    The error messages all says:
    "SecurityError Error #2047: Security sandbox violation parent" (then an URL)
    Some messages go on and list "display" and "managers" errors.
    I have uninstalled and installed Flash Player at least a dozen times.  It's getting frustrating because I have no idea what is wrong or how to fix it.  I've tried to find answers on the Forum and in the Help/Support sections but most of that information is just going over my head - I am not a techie.
    I'm using IE9 and my OS is Windows 7
    Can someone advise me in layman's terms how I can fix this?  Or should I even fret about?  It's annoying but I can get the videos to work.
    Many thanks

    As per your instructions, I removed the install.txt file and the ocx file that
    I listed in my previous post.
    My problem now is that I am unable to view the video at this particular
    website:  http://www.wildearth.tv/safari  because it states that I do not
    have the most current Flash Player installed.
    I am so confused.  I was under the impression that the files installed
    under my sysWOW64 folder were indeed the most current Flash Player
    files.  But when I go to download and install whatever program that I
    might reach via the link on that "safari" website, I end up back where I
    was which prompted my original post a few days ago.
    I really would like to be able to view this website.  But I don't want to
    be going through all this hassle again.  Why is this particular website
    not recognizing that I indeed have the most current Flash Player installed?
    Please advise and thank you.

  • PayPal transaction completing but getting error when connecting back to site.

    Hi there,
    I'm using PayPal standard to accept payment via my site. The transactions are being completed but it then fails to redirect properly to my site.  Im getting an error message of,
    An Error Occurred
    Please go back in your browser and try again.
    The domain seems to be correct.
    'https://ddfitness.worldsecuresystems.com/PaymentProcess.aspx?tx=3L296556310289342&st=Compl eted&amt=4%2e00&cc=GBP&cm=&item_number=101
    Any ideas?

    Thanks Liam.
    I'm using the paypal buttons rather than a web form.
    Yes I'm using paypal standard to sell access to a secure zone on an eCommerce package.

  • Installation stucks at "Install Java engine" with error

    I am trying to go through Netweaver 7.0 ehp1 java+sybase on linux, i met this kind of stuck while install the primary application server instance.
    An error occurred while processing option SAP Enhancement Package 1 for SAP NetWeaver 7.3 > SAP Sybase ASE > SAP Systems > Application Server Java > Distributed System > Primary Application Server Instance( Last error reported by the step: Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to /tmp/sapinst_instdir/NW731/SYB/INSTALL/NW731/SYB/DISTRIBUTED/JAVA/APP1.
    2014-04-24 11:48:23.683
               CJSlibModule::writeError_impl()
    CJS-30023  Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.
    ERROR      2014-04-24 11:48:24.11 [sixxcstepexecute.cpp:899]
    FCO-00011  The step runBootstrap with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|runBootstrap was executed with status ERROR ( Last error reported by the step: Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.).
    Appreciate for all your kind support.
    Thanks in advance!

    jvm_bootstrap.out:
       INFO: Loading tool launcher...
       INFO: [OS: Linux] [VM vendor: SAP AG] [VM version: 1.6.0_45] [VM type: SAP Java Server VM]
       INFO: Main class to start: "com.sap.engine.bootstrap.Bootstrap"
       INFO: Loading 21 JAR files: [/usr/sap/DLP/SYS/global/security/lib/tools/iaik_smime.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_ssl.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_jsse.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_jce.jar, /usr/sap/DLP/SYS/global/security/lib/tools/w3c_http.jar, ./bootstrap/sap.com~tc~sec~secstorefs~java~core.jar, ./bootstrap/sap.com~tc~bl~offline_launcher~impl.jar, ./bootstrap/sap.com~tc~je~datacollector.jar, ./bootstrap/sap.com~tc~bl~deploy~offline~impl.jar, ./bootstrap/jdbc.jar, ./bootstrap/sap.com~tc~je~cfs~container~standalone_impl.jar, ./bootstrap/sap.com~tc~je~offlineconfiguration~impl.jar, ./bootstrap/sap.com~tc~exception~impl.jar, ./bootstrap/sap.com~tc~bl~opensql~implStandalone.jar, ./bootstrap/sap.com~tc~je~extramile.jar, ./bootstrap/sap.com~tc~logging~java~impl.jar, ./bootstrap/sap.com~tc~bl~jdsr~jdsr.jar, ./bootstrap/sap.com~tc~bl~config~impl.jar, ./bootstrap/sap.com~tc~je~bootstrap~impl.jar, ./bootstrap/jperflib.jar, ./bootstrap/sap.com~tc~bl~iqlib~impl.jar]
       INFO: Start
    Starting to configure the bootstrap
          Bootstrap properties file [/usr/sap/DLP/J00/j2ee/cluster/bootstrap/bootstrap.properties] found
    Bootstrap configured for [141] ms
    Memory available to the bootstrap JVM: [2 GiB / 2863333376 bytes]
    -----[Bootstrap Module started]--------[Thu Apr 24 16:44:53 CST 2014]-------
    +------------[Bootstrap synchronization activities information]-----------+
    | Runtime Binaries: [X]        Native files: [X] Instance Properties: [X] |
    |  Nodes Structure: [X] Cluster File System: [X]    Online bootstrap: [ ] |
    +-------------------------------------------------------------------------+
    Properties used for initialization: [element.resynch=detect, Logging properties = {log[defaultTrace]=FileLog, log[defaultTrace].pattern=../../work/log_bootstrap.log, log[consoleLog].formatter=formatter[ConsoleFormatter], com.sap.engine.bootstrap.severity=Info, formatter[ConsoleFormatter]=TraceFormatter, log[consoleLog]=com.sap.engine.bootstrap.logging.BootstrapConsoleLog, com.sap.engine.bootstrap.logs=log[defaultTrace],log[consoleLog], log[defaultTrace].cnt=3, formatter[BootstrapFormatter]=TraceFormatter, log[defaultTrace].formatter=formatter[BootstrapFormatter], formatter[ConsoleFormatter].pattern=%m, log[defaultTrace].limit=5242880, formatter[BootstrapFormatter].pattern=[%24d] %m}, debug=no, Watchdog properties = {watchdog.timeout=90000, watchdog.check_interval=2000}]
    Bootstrap initialized for [290] ms
    Watchdog [90000] ms checking every [2000] ms started
    Starting to initialize database connection
    Exception occurred for component [internal/unkown] of type [unkown]
    com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed due to OpenSQL error.Check if your db driver file is available on the file system or if the user has correct permissions for that file
      at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:146)
      at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
      at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
    ----------==[ Caused by: ]==----------
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:482)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:196)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
      at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:138)
      at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:309)
      at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:59)
      at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
      at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
      at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
    Caused by: com.sap.sql.log.OpenSQLException: Could not load class com.sybase.jdbc4.jdbc.SybDriver with class loader com.sap.engine.offline.FileClassLoader@604b7b51.
      at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
      at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
      at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:642)
      at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:603)
      at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:137)
      at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
      at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:468)
      ... 13 more
    Caused by: java.lang.ClassNotFoundException: com.sybase.jdbc4.jdbc.SybDriver
      at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:916)
      at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:807)
      at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:755)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
      ... 21 more
    [Bootstrap]> Error during synchronization. More details: the previous log entries

  • Sysprep fails in customed installed Windows 8 with Error " A fatal error occurred while trying to sysprep the machine "

    Hi There,
    I have a Lenovo x240 and i have installed a fresh copy of W8 on it (without any key since we install license keys individually). What i basically do is to download and run Lenovo System Update which downloads and installs chipset drivers automatically. Once
    this is completed i run sysprep with command: sysprep /generalize /oobe /shutdown (we do not use any answer file) and proceed to capture the image afterwards. This has been working fine with laptops/computers running Windows7. It is not the case with Windows
    8 though.
    I have check the setuperr file for errors and states that is failing to secure drivers (intel\openCl). Error is below:
    Any suggestions on how to resolve this issue are greatly appreciate it.
    ERROR IS:
    2014-01-10 09:44:42, Error      [0x0f00a4] SYSPRP WinMain: Unable to parse command-line arguments to sysprep; GLE = 0x0
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clang_compiler64.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\cpu_device64.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\intelocl64.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\OclCpuBackend64.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\task_executor64.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\tbb\tbb.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\tbb\tbbmalloc.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_e9.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_h8.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_l9.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clang_compiler32.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9_img_cbk.o. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9_img_cbk.rtl. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\cpu_device32.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\intelocl32.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\OclCpuBackend32.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\task_executor32.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\tbb\tbb.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\tbb\tbbmalloc.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_g9.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_n8.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_s9.dll. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\llvm_release_license.txt. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\readme.txt. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\version.ini. Err = 0x3
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files\Realtek\Audio\HDA\AERTSr64.exe. Err = 0x2
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Windows\system32\drivers\intelaud.sys. Err = 0x2
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Windows\System32\drivers\iwdbus.sys. Err = 0x2
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Windows\system32\igfxsrvc.exe. Err = 0x2
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Windows\system32\igfxtray.exe. Err = 0x2
    2014-01-10 09:47:18, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Windows\system32\RTSnMg64.cpl. Err = 0x2
    2014-01-10 09:52:20, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 0x1f
    2014-01-10 09:52:20, Error                 SYSPRP WinMain:Hit failure while processing sysprep re-specialize internal providers; hr = 0x8007001f
    2014-01-10 10:26:15, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 0x1f
    2014-01-10 10:26:15, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
    2014-01-10 10:30:06, Error      [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'SysPrepDtcCleanup' from C:\Windows\system32\msdtcprx.dll; dwRet = 0x80100101[gle=0x000000b7]
    2014-01-10 10:30:06, Error                 SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0x80100101[gle=0x000000b7]
    2014-01-10 10:30:06, Error                 SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0x80100101[gle=0x000000b7]
    2014-01-10 10:30:06, Error                 SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Cleanup.xml; dwRet = 0x80100101
    2014-01-10 10:30:06, Error                 SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0x80100101
    2014-01-10 10:30:06, Error      [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0x80100101
    2014-01-10 10:30:06, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80100101

    I am also getting this SAME error on a Microsoft Surface Pro 2 that is brand new out of the box with no updates applied to it whatsoever.
    I literally open computer, configure prefs... then sysprep with generalize.
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clang_compiler64.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfne9_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnh8_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\clbltfnl9_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\cpu_device64.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\intelocl64.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\OclCpuBackend64.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\task_executor64.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\tbb\tbb.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\tbb\tbbmalloc.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_e9.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_h8.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x64\__ocl_svml_l9.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clang_compiler32.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfng9_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfnn8_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9_img_cbk.o. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\clbltfns9_img_cbk.rtl. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\cpu_device32.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\intelocl32.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\OclCpuBackend32.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\task_executor32.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\tbb\tbb.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\tbb\tbbmalloc.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_g9.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_n8.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\bin\x86\__ocl_svml_s9.dll. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\llvm_release_license.txt. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\readme.txt. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\Program Files (x86)\Common Files\Intel\OpenCL\version.ini. Err = 0x3
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\windows\system32\drivers\intelaud.sys. Err = 0x2
    2014-01-20 11:13:51, Error                 SYSPRP SPPNP: Failed to secure driver file C:\windows\System32\drivers\iwdbus.sys. Err = 0x2

Maybe you are looking for

  • WSDL -authentication issue

    Hi All, I have a requirement of Proxy to Soap. Client have given the below webservice.       <Id>int</Id> <Password>string</Password>       <RequestXML>string</RequestXML>     </Request>   </soap:Body> </soap:Envelope> Here i want to give the authent

  • Playing mp3s in order I want

    I have yet to figure out how to load and play mp3s in the order I want. I can change the playlist but when I connect to load my shuffle the songs appear the way shuffle wants them.Can anyone help? Thanks

  • Source codes for AdvancedDataGrid missing

    I guess because it is one of water-marked components, right?

  • Hard Drive reading zero!!!!

    Hi, I recently bought a mint Ibook from my friend which I gave to my girlfriend as a gift. I wanted the computer to be like new for her so I formatted the drive and zeroed everything so it would be like new for her. I everything went well and I upgra

  • How to get templates visible in assets panel

    Hello! My problem is to get the templates visible in the assets panel. I created a site where the templates are visible in assets panel (the first phase of the pic). In order to meet the demands of the server, I had to change the folder structure of