MDT - Very Slow in Hyper-V

Hi @all,
i have a Lenovo T520 with 8 Cores, 256SSD for OS, 750GB SSD for Data
OS is Windows 8.1 x64
Hyper-V is installed
MDT 2012 Update 1 inkl. ADK and WAIK
i have created a Virtual Machine with 2CPUs 4GB Memory
Problem is, that the Installation of Windows 7 incl. Updates take half day (Capture)
what can i do, that the harddisk perfomance, network perfomance is higher?
HELP

Half a calendar day? 12hrs or half a work Day 4hrs (or 3 hrs in france ;^)
One of the cool things about CMTrace is that it can view the bdd.log files in a structured fashion.
You can follow the entire installation process, and see the time it takes for each step.
Unfortunately, there are many reasons why a deployment could be running slow. Your machine seems fast enough (ram?), however, Frank is correct, you have not mentioned how fast your network is, and you also didn't mention how many updates you have to install,
or where they are coming from. Do you have a local WSUS server? If you are downloading 3GB of patches from Windows Update over a slow WAN link, yea, it's going to take a while. :^(
I for example refuse to work in any environment using Fast Ethernet. Gigabit only for my test environments. :^)
-k
Keith Garner - keithga.wordpress.com

Similar Messages

  • Hyper-v and very slow network

    Dear all,
    I have a big problem with my hyper-v server and network card. I've found a lot of topic around this question but none of them helped me.
    I have a Win 2008 R2 Server with only Hyper-V installed. I have 3 NIC , one is reserved to the host management and the others two are reserved for virtual machine .
    All NIC are Intel, one is integrated on the Intel motherboard and the others are Intel Gigabit ET Dual port .
    Before installing the role of Hyper-V all NIC worked perfectly with speed around 1Gb (file transfer average 90 MB/Sec, of course I have a Gigabit LAN) .
    After Hyper-V install, the host system  is going very slow and the network file transfer using the dedicated NIC is about ten time slower (9-10MB /sec) . Same problem with all VM off and also if I remove all VM !
    I tried all of suggestion found in old post (disabling TCP checksum / offload ...) but nothing happens.
    What is really strange is that by removing all network card all the Host operating system seems to improve the speed... but, of course, I can't use  my LAN :(
    I need help because every night I must make a full backup of Virtual hard disk from the host to a backup server in my lan.
    My configuration:
    - Server Win 2008 R2 SP1 with Hyper-V and no others role
    - 2 Virtual Machine (one Win 2008 R2 and one Win 7 Ultimate)
    - NAS Linux (access via SMB with no problem)
    - Various Windows 7 Pro client
    Thanks in advance to everybody,
    Luca M.

    I disabled the VMQ on the configuration of the HV physical machine, a LACP with 2 NICs, so i disabled on both.
    Before, i tried to disable  VMQ on the Multiplex adapter (connected to the vswitch and dind´t worked
    The ping times drop form 200ms to 6ms, normal in my environment
    Before and after:
    PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
    Name                      DisplayName                    DisplayValue                   RegistryKeyword RegistryValue
    SLOT 1 Port 2             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 2             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 4             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 4             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 1             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 1             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 3             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 3             Virtual Machine Queues         Enabled                        *VMQ            {1}
    PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
    Name                      DisplayName                    DisplayValue                   RegistryKeyword RegistryValue
    SLOT 1 Port 2             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 2             Virtual Machine Queues         Disabled                       *VMQ            {0}
    SLOT 1 Port 1             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 1             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 3             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 3             Virtual Machine Queues         Enabled                        *VMQ            {1}
    SLOT 1 Port 4             Maximum Number of RSS Queues   RSS 4 Queues                   *NumRssQueues   {4}
    SLOT 1 Port 4             Virtual Machine Queues         Disabled                       *VMQ            {0}
    PS C:\Users\Administrator> Get-NetLbfoTeam
    Name                   : TeamMGMT
    Members                : {SLOT 1 Port 1, SLOT 1 Port 3}
    TeamNics               : TeamMGMT
    TeamingMode            : Lacp
    LoadBalancingAlgorithm : TransportPorts
    Status                 : Up
    Name                   : TeamVM
    Members                : {SLOT 1 Port 4, SLOT 1 Port 2}
    TeamNics               : TeamVM
    TeamingMode            : Lacp
    LoadBalancingAlgorithm : HyperVPort
    Status                 : Up

  • MDT Wizard very slow to start when launching Litetouch.vbs

    Hi,
    For a few months, I have an issue when launching Litetouch.vbs, the Wizard initialisation il very slow. Normaly it takes 20 to 30 seconds to launch, now it takes about 4 minutes. The wizard hang 3 times for 1.5 minute. The problem is present on
    many computers here and even on a brand new installed computer.
    Something strange, when the Wizard have been launched a first time, then closed. The next time I launch Litetouch.vbs, I is fast (20 to 30 seconds).
    When I check the LOG : C:\MININT\SMSOSD\OSDLOGS\BDD.log, the lines that seems to hang are :
    <![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!>
    <![LOG[Property definition is now = WelcomeWiz_Initialize.xml]LOG]!>
    <![LOG[Property definition is now = DeployWiz_Definition_ENU.xml]LOG]!>
    Does anyone have an idea what can be the problem ?
    Thanks!
    Dominic

    The lines that are running slow above are when MDT is trying to write to the variables.dat file. There is nothing special about this operation, it's just reading/writing to a text file.
    I still think there is something else on this machine that is causing the litetouch.wsf scripts to run slowly. Perhaps you have some anti-virus programs causing problems.
    Best way to isolate the problem is to load a clean version of windows on a machine (without any corporate apps), and try running MDT litetouch again.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Lightroom is very slow, utilizes 100% CPU, then freezes or closes program.  How do I fix it?

    I am having a problem with Lightroom 5 being very slow, utilizing 100% CPU, then freezing or closing the program.  How do I fix it?
    I just upgraded to LR5 from LR3 on Sunday as well as CS6 from CS5 (which I have not tried out yet).  I spent several hours talking with Vamil, from LR Support Staff yesterday.  He was extremely helpful and kind and tried everything he could think of while remote-handling my PC and talking with me on the phone.  He deleted preferences, cache, temp files, updated graphics with a new replacement file from AMD site, then re-downloaded and reinstalled LR5. 
    It is still very slow and then freezes and closes down with a message of utilizing 100% CPU.  Within several seconds of using the brush in Develop, I started having lots of problems.  I could not even move the picture around.  The side screens would not disappear like they should.  And I could not move to another picture.  The day before I spent several hours trying to work on just 1 picture.  After all the changes yesterday, I tried to move from picture number 1 to about 130 after having not touched it for 10 minutes, and a half hour later, it still said, "Processing" with no picture coming up, just a blank prieview pane.
    LR Support suggested I get a new CPU though he thought according to specs mine should be ok and other programs were running fine.
    My PC is only 2 years old.
    I talked to HP briefly about CPU updates for my HP PC.  He said I probably do not have a problem but suggested I run self-diagnostics and maybe buy a new CPU anyway. 
    I ran diagnostics listed through the HP Support Assistant connection on my PC.  All was ok. 
    I still researched if I could buy a compatible CPU upgrade.  I cannot even find any CPUs still selling that are listed for my PC.  Best Buy Store said they could not even order a compatible CPU.  They said my Bus speed may not be big enough, so they suggest I get a new PC.  What Bus speed do I need?
    I have the following PC Setup:
         AMD Phenom II X6 1045T Processor 2.70 GHz with 6 Cores
              with 2700 MHz Base, 3200 MHz Boost, and 4000 System Bus Speed, and 95 watts;
         HP Pavilion Elite, HPE-500y, 900 GB Free, new in 2011;
         Windows 7, 64 Bit;
         RAM 16 GB, DDR3;
         Graphics AMD Radeon HD 6450;
         Nikon, D200, with Raw Files;
         External Hard Drive for Original Photos, 600 GB Free;
         LR Catalog and Library are on Main Hard Drive;
         Monitor, Sony CPD-200ES, new in 2004.
    I am thinking of buying a new monitor tonight mostly so I can do better photo work while enlarging the pictures to do it.  I am concerned that while it will help my viewing, it will take more power away, and make my usage of LR5 even worse.  Will a new monitor affect my performance?  I am looking at HP Monitors with IPS.  Is this the best recommended choice for LR and Photoshop CS6?
    I think I would like to stay with a 6 core processor since I need to have several items open for other non-Photoshop functions.  When running LR5, I had everything else closed.  With LR3, I was able to have other things open.
    I do not really want to buy a new computer and know that those I have talked with at this point are only guessing after looking for what they thought should fix it.  4 People from Lightroom Support have all thought I should not be having problems with my setup. 
    I bought one of the best computers 2 years ago.  Is it really obsolete already so that I cannot use LR5?  Is everyone else buying a new PC every 2 years?  I used to go 5-7 years. 
    Even though I have figured out some of what my PC has, I really do not know technically what I am talking about so am at the mercy of other's help.  Are there any solutions that might work short of buying a new computer?
    I also have taken 40th anniversary photos for some people and am waiting to give them as a free gift since I am not a professional at all.  I am hoping to get through this problem soon so that I can provide some nice memories for them.
    I have not gotten any further than trying to adjust 1 picture.  I have no comments on uploading speed, since I did that while still in LR3.
    Thank you for your time and help.

    I'm running LR with no speed issues on an Intel 17-860 quad core with about the same performance as your AMD Phenom II X6 1045T Processor. My system is also an HP, which originally had a single 1TB 7200 HDD. I've since added a second 2TB Black Caviar HDD, which provided no significant difference in LR's performance.
    AMD processors do not implement hyper-threading and don't need it. I'd start debug by process of elimination:
    1) Disconnect all externally attached USB, FireWire, or other externally connected devices except keyboard, mouse, and your single 1280 x1024 display. This includes all externally attached memory card readers, phones, ipads, etc.
    2) Reboot and logon as Administrator.
    3) Remove your Internet connection and turn off all Antivirus and firewall programs.
    4) Open LR and under Catalog Settings set 'Standard Preview Size' to 1440 (slightly larger than your display width). Under the Metadata tab here make sure 'Automatically Write changes into XMP is NOT checked.
    4) Create a 'New Catalog,' Create a new folder and add about 10 raw image file copies to it for testing, and Import it into the new catalog. In the Import module make sure under File Handling 'Render Previews' has 1:1 selected. Wait until all Preview building has completed in the Library module.
    Try editing these image files inside the new catalog as you were previously.

  • My MacBook is running very slow.

    Yesterday I added a second Thunderbolt monitor. I'm not sure if it is the cause of slowness or if I have too  many programs, a virus or what. In doing research I found EtreCheck which I ran.  Here are the results.  Can anyone suggest what I need to do to get some speed back? Thank you!
    Problem description:
    Computer is running very slow
    EtreCheck version: 2.1.8 (121)
    Report generated March 31, 2015 at 9:10:11 PM MDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Click the [Adware! - Remove] links for help removing adware.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2.4 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Check Battery - Cycle count 76
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
        AMD Radeon HD 6770M - VRAM: 1024 MB
            Thunderbolt Display 2560 x 1440
            Thunderbolt Display 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: one day 3:30:51
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.93 GB (330.05 GB free)
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Western Digital My Book 1234 3 TB
            disk2s1 (disk2s1) <not mounted> : 66 KB
            My Book (disk2s3) /Volumes/My Book : 3.00 TB (866.94 GB free)
        Apple Computer, Inc. IR Receiver
        VIA Labs, Inc. USB2.0 Hub
        X-Rite, Inc. ColorMunki Display
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. Display Audio
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. Display Audio
        Apple Inc. FaceTime HD Camera (Display)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            Apple Inc. Thunderbolt Display
                Apple Inc. Thunderbolt Display
    Gatekeeper: ℹ️
        Anywhere
    Adware: ℹ️
        Geneio [Adware! - Remove]
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.10) [Click for support]
            /System/Library/Extensions
        [loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
        [not loaded]    com.sierrawireless.driver.SierraDIPSupport (1.0.0) [Click for support]
        [not loaded]    com.sierrawireless.driver.SierraFSRSupport (3.0.0 - SDK 10.6) [Click for support]
        [not loaded]    com.sierrawireless.driver.SierraHSRSupport (3.0.0 - SDK 10.6) [Click for support]
        [not loaded]    com.sierrawireless.driver.SierraIPDirect (1.1.5) [Click for support]
        [not loaded]    com.sierrawireless.driver.SierraQMISupport (1.0.1 - SDK 10.6) [Click for support]
        [loaded]    com.sierrawireless.driver.SierraVSP (1.0.0) [Click for support]
        [not loaded]    com.sierrawireless.driver.qmiNetDriver (1.0.3 - SDK 10.6) [Click for support]
        [not loaded]    com.wacom.kext.wacomtablet (6.3.11 - SDK 10.9) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
    Startup Items: ℹ️
        ProTec6b: Path: /Library/StartupItems/ProTec6b
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.wacom.wacomtablet.plist [Click for support]
        [loaded]    com.xrite.device.softwareupdate.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.xrite.device.xrdd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        ChronoSyncBackgrounder    Application  (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Caffeine    Application  (/Applications/Caffeine.app)
        TextExpander    Application Hidden (/Users/[redacted]/Downloads/Mac Downloads/TextExpander.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        ColorMunkiDisplayTray    Application  (/Library/Application Support/Colormunki/Display/Tools/ColorMunkiDisplayTray.app)
        Flickr Uploadr    Application  (/Applications/Flickr Uploadr.app)
    Internet Plug-ins: ℹ️
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        Picasa: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Omnibar [Adware! - Remove]
    3rd Party Preference Panes: ℹ️
        ChronoAgent  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
        WacomTablet  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 748.93 GB Disk used: 418.87 GB
        Destinations:
            Seagate Backup Plus Drive [Local]
            Total size: 1.50 TB
            Total number of backups: 53
            Oldest backup: 2014-03-02 22:20:08 +0000
            Last backup: 2015-03-30 22:32:20 +0000
            Size of backup disk: Adequate
                Backup size 1.50 TB > (Disk used 418.87 GB X 3)
    Top Processes by CPU: ℹ️
            27%    WindowServer
             8%    FlickrDesktop
             4%    com.hp.devicemonitor
             4%    Finder
             3%    Google Chrome
    Top Processes by Memory: ℹ️
        1.14 GB    Adobe Photoshop Lightroom 5
        292 MB    Google Chrome
        146 MB    Google Chrome Helper
        137 MB    FlickrDesktop
        137 MB    systemstatsd
    Virtual Memory Information: ℹ️
        296 MB    Free RAM
        2.87 GB    Active RAM
        2.50 GB    Inactive RAM
        1.52 GB    Wired RAM
        17.90 GB    Page-ins
        195 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 03:29:28 PM    /Library/Logs/DiagnosticReports/FlickrDesktop_2015-03-31-152928_[redacted].cpu_ resource.diag [Click for details]
        Mar 30, 2015, 11:24:28 PM    /Library/Logs/DiagnosticReports/mdworker_2015-03-30-232428_[redacted].cpu_resou rce.diag [Click for details]
        Mar 30, 2015, 07:48:41 PM    /Library/Logs/DiagnosticReports/FlickrDesktop_2015-03-30-194841_[redacted].cpu_ resource.diag [Click for details]
        Mar 30, 2015, 05:28:58 PM    Self test - passed
        Mar 30, 2015, 04:36:06 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-03-30-163606_[reda cted].crash
        Mar 30, 2015, 07:06:57 AM    /Library/Logs/DiagnosticReports/xrdd_2015-03-30-070657_[redacted].crash
        Mar 30, 2015, 07:06:55 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/ColorMunkiDisplayTray_2015-03- 30-070655_[redacted].crash
        Mar 29, 2015, 12:09:10 AM    /Library/Logs/DiagnosticReports/mtmfs_2015-03-29-000910_[redacted].cpu_resource .diag [Click for details]
        Mar 28, 2015, 10:40:48 PM    /Library/Logs/DiagnosticReports/Adobe Photoshop CC 2014_2015-03-28-224048_[redacted].cpu_resource.diag [Click for details]
        Mar 28, 2015, 10:15:33 PM    /Library/Logs/DiagnosticReports/FlickrDesktop_2015-03-28-221533_[redacted].cpu_ resource.diag [Click for details]
        Mar 28, 2015, 09:22:24 PM    /Library/Logs/DiagnosticReports/FlickrDesktop_2015-03-28-212224_[redacted].cpu_ resource.diag [Click for details]

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1309 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 50 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' ' {o=o"\n"$0} NR==6{p=$1*$5} END{if(p>'${p[27]}'*10^6)print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign lockstat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pa(gin|us)|Purg(ed|in)| err|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |gnment |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv '-D1 -IPRWck -s5 sleep 1' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}\ services\ {load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;B2&&D0 45 90 124;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • After Photoshop CC 2014 update - Photoshop is very slow (Windows 7)

    After updating today to the latest photoshop cc2014 Version, Photoshop starts very slow and is not useable.
    I updated from V. 2014.1.0 to 2014.2.1 20141014.r.257.
    Starting Photoshop Needs 6 minutes (before 1.5 minutes). The menue and button reactiontime is more than slow, you cant work with this Setup.
    Is there a Problem with the new release?
    And please Adobe, dont tell me, my System has a problem. Did only an update on the CC2014 Suite via creative cloud. Old PS Version (2014.1.0)runs great.
    After testing a few time, I recovered my System back to Version 2014.1.0 with Windows recovery and Photoshop works good again.
    So whats wrong with the new release?
    My PC config:
    Adobe Photoshop Version: 2014.2.1 20141014.r.257 2014/10/14:23:59:59 CL 987299  x64
    Windows 7 64-Bit
    Version: 6.1 Service Pack 1
    Intel CPU-Familie:6, Modell:10, Stepping:5mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, Hyper-Threading
    Physischer Prozessor: 8
    Logischer Prozessor: 16
    Prozessor-Taktfrequenz: 2664 MHz
    Memory: 20463 MB
    Thanks for any tipp!
    BR.
    Werner

    The CC 2014 update  2014.2.1 is a month old and ACR 8.7 is two days old.  Something strange is happening to you.  First try resetting your Photoshop Preferences. This is a Adobe Photoshop User forum your not dealing with Adobe here. You seem to think you are and your attitude seems like you not open to to possibility that your system may have a problem. I think you may have one..
    Adobe CC 2014 Product Updates/Downloads for Windows
    Photoshop CC 2014
    File Download
    Size
    Date
    Notes
    Adobe Photoshop 2014.2.1 Update for CC 2014 (64-bit)
    249 MB
    10/20/2014
    Release 15.2.1
    Adobe Photoshop 2014.2.1 Update for CC 2014 (32-bit)
    223 MB
    10/20/2014
    Adobe Photoshop 2014.2.0 Update for CC 2014 (64-bit)
    249 MB
    10/6/2014
    Release 15.2
    Adobe Photoshop 2014.2.0 Update for CC 2014 (32-bit)
    223 MB
    10/6/2014
    Adobe Photoshop 2014.1.0 Update for CC 2014 (64-bit)
    236 MB
    8/5/2014
    Release 15.1
    Adobe Photoshop 2014.1.0 Update for CC 2014 (32-bit)
    210 MB
    8/5/2014
    Adobe Camera Raw – ACR
    Adobe Camera Raw 8.7 Update for CC
    122 MB
    11/18/2014
    Release 8.7
    Adobe Camera Raw 8.6 Update for CC
    106 MB
    7/28/2014
    Release 8.6
    Adobe Camera Raw 8.5 Update for CC
    100 MB
    6/18/2014
    Release 8.5

  • Very Slow VDI Client Login Time

    Hi,
    My environment contains two Hyper-V Servers for DCs, Connection Broker, RD-Web, and two Hyper-V servers as virtualization host to thin clients. All Hyper-V servers are only 35% utilized and all client VMs don't have a performance issue.
    After setting up the roles and creating the "Personalized Pools", I open the RD-Web, click on the collection and here it takes a very long time in securing connection part, then a warning message appears for the connection broker self-signed certificate,
    I accept it and again a very long time to open the VM.
    After searching the internet I figured out that I should install "PFX" certificates for the connection broker (SSO, Publisher). In my environment, we don't use a public certificate from trusted root CAs, however, we have our own "Enterprise
    Root CA".
    I then figured that I should create a certificate with the following attributes:
    Advanced Key Usage: Server Authentication, Client Authentication
    Key Usage: Data encipherment, Digital Signature, Key Agreement
    I created the certificate and imported it to the RD CB, however, the "securing connection" part was even slower than before, so I duplicated the "Computer" certificate, and configured 1024 bit certificate instead of the old one "2048".
    The "securing connection" part is taking half the time now, however it is still very long "+60 seconds" to open the VM.
    I still suspect that it is a certificate issue and not sure if I have done the correct certificate.
    Would anyone help in this case and providing the correct steps to install a certificate for the RD CB from internal CA.
    Thanks.

    Hi,
    To avoid confusion, let's focus on the same thread.
    http://social.technet.microsoft.com/Forums/en-US/17fb24d7-61a7-49be-83b3-35bd9d8b6863/very-slow-vdi-login-time?forum=winserverTS
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Lightroom 3.3 speed, very very slow

    Does anyone know why Lightroom 3.3 on a Mac is so slow?
    The new version 3 was suppose to be faster than version 2. I purchased a new MacPro 12 core with 16GB of ram and with nothing else running, LR 3.3 is still as slow as it was in version 2.
    I select multiple images make changes with sync metadata on, and it take minutes before changes show up. My activity monitor shows hardly any activity.
    Anyone have any thoughts on why LR3 is still very slow?

    rmherzog,
    Actually, there are performance issues with multi-core machines (such as yours and mine) that are being researched at Adobe.  Hard to pinpoint the problem so I suspect the answer will be a long time coming.  Some functions seem to take advantage of all of my cores (like exporting) but other functions (like local editing and spot removal) are hit and miss.  LR3 on the same machine is probably always going to be a bit slower than 2.x despite the advertising due to the change in algorithms; however, switching from a quad to a 12-core machine should ultimately over-compensate for that.  I have a PC so it isn't limited to Mac machines.
    I was able to increase performance quite a bit by turning off hyper-threading (that bios feature that makes the computer think it has twice the number of cores that it really has) and certain software that loaded with the monitor drivers.  Now it thinks it has 8 cores instead of 16 and somehow uses those 8 more efficiently than the hypertheaded 16.  In any case, depending on how Mac's work you might look into that.  There are other suggestions in a similar thread relating to performance posted by Tom from Adobe that you might want to consider as well.
    Jeff
    PS - strangely enough, the slowest files on my machine are JPEG scans.  Local editing can be quite burdonsome for me with these files whereas the RAW files seem to be only mildly sluggish but very consistent.

  • VERY SLOW, LAGS & FREEZES!!

    Just got the phone I like it but it is very slow! is BB coming out with a software update or something to fix this soon?

    I have noticed that during data intensive tasks (Viigo update), it will slow a lil bit
    Other than that, I dont see the lag. maybe you are clicking on an icon too much and opening it up twice but relly canceling it and opening it up.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • SCVMM live migrations very slow

    I'm running Hyper V with SCVMM 2012 in my test environment. 2 hosts connected to a MD1200 and set up in a cluster. Everything works perfectly, except that live migrations take a super long time. By this I mean that when I start the Migration Wizard it takes up to 5 minutes to rate the hosts, and then when it finally completes and I start the migration, it can take up to another 5 minutes to complete the move.In my production clusters this doesn't work this way, there the Migration Wizard takes seconds to rate the hosts and usually less than a minute to move the VM.The only major difference between my test environment and my production environment is that test is using direct SAS connections to the SAN, where in prod everything runs through switches. In prod one cluster is all 1gig and one cluster is 10gig and both are about the same...
    This topic first appeared in the Spiceworks Community

    Hey guys,
    I have searched online and in MS forums, and cannot resolve my issue.
    I have checked through similar articles, without any resolution.
    Migrating
    Mailbox From Exchange 2007 to  Exchange 2010: Very Slow                        
    Exchange 2013 Mailbox Migration Rate/Speed ?                        
    Public Folders after migration
    to Exchange 2013 are extremly slow                        
    Exchange 2010 mailbox move to Exchange 2013                        
    Single Mailbox Very Slow after 2003
    to 2010 Migration
    I have also come across the most common solution which is written here
    http://support.microsoft.com/kb/2807668, however this is not my problem.
    My problem is that mailbox migrations are SLOW, I'm talking about < 15MB per minute.  I do NOT have any contentIndex errors on any of my databases, they are all healthy and stay healthy throughout the migrations.  Both Exchange 2010 and 2013
    are DAGs.
    When I 'view details' from the ECP migrations page, I see things like 'Stalled duration
    00:53:21 ', however like I said there is no errors, and nothing mentioned in the user report.
    Get-ClientAccessServer | Test-MRSHealth this checks out fine, no problems.
    I have disabled offloading on all of the NICs.
    Is there anything else I can do or monitor to find out why its so slow?
    Could it be because of DAG even though there are no errors and the state is healthy.  Would an idea be to take down the dag during migration then add that after all is done?
    Andrew Huddleston | Hillsong Church | Sydney

  • Firewall/VPN Model-SG300 Cyberguard after configuration internet working very slow....please help me...

    HI FRIENDS,
    i have one firewall model number sg300 i configured each and everything
    but after configuration internet working very slow.if i want to open any website it is taking 5 min .i connected
    my lease ling directly in this device.
    please help me....
    Thanks,
    Madhukar 

    Hi Madhukar,
    It seems that it is not a hyper-v issue .
    For troubleshooting this please use your computer to access internet directly (without firewall ).
    If it works well , you may go over the configuration of the firewall .
    Also you can contact the hardware vendor .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

    My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in  mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
    EtreCheck version: 1.9.15 (52)
    Report generated 8 September 2014 09:09:26 BST
    Hardware Information: ?
      iMac (20-inch, Early 2008) (Verified)
      iMac - model: iMac8,1
      1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information: ?
      ATI Radeon HD 2600 Pro - VRAM: 256 MB
      iMac 1680 x 1050
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
    Disk Information: ?
      Hitachi HDP725032GLA380 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Bose Corporation Bose USB Audio
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ?
      Mac App Store and identified developers
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    Launch Agents: ?
      [running] com.trusteer.rapport.rapportd.plist Support
    User Login Items: ?
      iTunesHelper
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 5.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      iPhotoPhotocast: Version: 7.0
      QuickTime Plugin: Version: 7.7.3
      eMusicRemote: Version: (null) Support
      eMusic: Version: Unknown
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Flip4Mac WMV  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          2% iTunes
          2% WindowServer
          0% coreaudiod
          0% fontd
          0% rapportd
    Top Processes by Memory: ?
      178 MB Finder
      133 MB com.apple.WebKit.WebContent
      109 MB iTunes
      92 MB Safari
      63 MB com.apple.quicklook.satellite
    Virtual Memory Information: ?
      24 MB Free RAM
      821 MB Active RAM
      807 MB Inactive RAM
      291 MB Wired RAM
      338 MB Page-ins
      680 KB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Mac Mini boots very slow with Mavericks (after security update)

    Hi,
    my Mac Mini boots very slow after I've installed Maveriks. I did two clean installs by now, seemed to work OK after the second one but after the latest safety update (2014-002) the boot time is up to 5+ minutes. Starting Safari or other software takes addtional time. See below for system specs, Etrecheck and log. Any ideas what could cause this? According to the update history I did install the security update 2014-002 twice on the same day although I cannot remember doing such a thing.
    Thanks Joerg
    Hardware Information:
              Mac mini (Late 2009)
              Mac mini - model: Macmini3,1
              1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce 9400 - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 0:42:32
    Disk Information:
              Hitachi HTS545032B9SA02 disk0 : (320,07 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319,21 GB (225 GB free)
              OPTIARC DVD RW AD-5670S 
    USB Information:
              Mitsumi Electric Hub in Apple Extended USB Keyboard
                        Mitsumi Electric Apple Optical USB Mouse
                        Mitsumi Electric Apple Extended USB Keyboard
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
    Gatekeeper:
              Mac App Store and identified developers
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Default Browser: Version: 537 - SDK 10.9
    Safari Extensions:
              AdBlock: Version: 2.6.28
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   3%          WindowServer
                   1%          fontd
                   0%          Console
                   0%          coreservicesd
                   0%          imagent
    Top Processes by Memory:
              213 MB          Safari
              90 MB          com.apple.IconServicesAgent
              90 MB          com.apple.WebKit.WebContent
              82 MB          mds_stores
              49 MB          Console
    Virtual Memory Information:
              5.33 GB          Free RAM
              1.60 GB          Active RAM
              211 MB          Inactive RAM
              627 MB          Wired RAM
              230 MB          Page-ins
              0 B          Page-outs
    28.04.14 09:48:09,000 bootlog[0]: BOOT_TIME 1398671289 0
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.appstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
    Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.authd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.bookstore" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.eventmonitor" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.install" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.iokit.power" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.mail" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.MessageTracer" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.performance" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 syslogd[19]: Configuration Notice:
    ASL Module "com.apple.securityd" claims selected messages.
    Those messages may not appear in standard system log files or in the ASL database.
    28.04.14 09:55:31,000 kernel[0]: Longterm timer threshold: 1000 ms
    28.04.14 09:55:31,000 kernel[0]: Darwin Kernel Version 13.1.0: Wed Apr  2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
    28.04.14 09:55:31,000 kernel[0]: vm_page_bootstrap: 1867682 free pages and 147550 wired pages
    28.04.14 09:55:31,000 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
    28.04.14 09:55:31,000 kernel[0]: zone leak detection enabled
    28.04.14 09:55:31,000 kernel[0]: "vm_compressor_mode" is 4
    28.04.14 09:55:31,000 kernel[0]: standard timeslicing quantum is 10000 us
    28.04.14 09:55:31,000 kernel[0]: standard background quantum is 2500 us
    28.04.14 09:55:31,000 kernel[0]: mig_table_max_displ = 74
    28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    28.04.14 09:55:31,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Sandbox
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    28.04.14 09:55:31,000 kernel[0]: calling mpo_policy_init for Quarantine
    28.04.14 09:55:31,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    28.04.14 09:55:31,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    28.04.14 09:55:31,000 kernel[0]: The Regents of the University of California. All rights reserved.
    28.04.14 09:55:31,000 kernel[0]: MAC Framework successfully initialized
    28.04.14 09:55:31,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    28.04.14 09:55:31,000 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
    28.04.14 09:55:31,000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    28.04.14 09:55:31,000 kernel[0]: ACPI: sleep states S3 S4 S5
    28.04.14 09:55:31,000 kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
    28.04.14 09:55:31,000 kernel[0]: [ PCI configuration begin ]
    28.04.14 09:55:31,000 kernel[0]: console relocated to 0xf80010000
    28.04.14 09:55:31,000 kernel[0]: [ PCI configuration end, bridges 5, devices 18 ]
    28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
    28.04.14 09:55:31,000 kernel[0]: NVEthernet::start - Built Sep 19 2013 22:20:06
    28.04.14 09:55:31,000 kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
    28.04.14 09:55:31,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    28.04.14 09:55:31,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    28.04.14 09:55:31,000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 34159efffe270ccc; max speed s800.
    28.04.14 09:55:31,000 kernel[0]: rooting via boot-uuid from /chosen: 289A3125-09B8-376B-ACE3-38D61384202E
    28.04.14 09:55:31,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    28.04.14 09:55:31,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    28.04.14 09:55:31,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    28.04.14 09:55:31,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS545032B9SA02 Media/IOGUIDPartitionScheme/Customer@2
    28.04.14 09:55:31,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
    28.04.14 09:55:31,000 kernel[0]: BTCOEXIST off
    28.04.14 09:55:31,000 kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
    28.04.14 09:55:31,000 kernel[0]: 5.10.131.36
    28.04.14 09:55:31,000 kernel[0]: hfs: mounted Macintosh HD on device root_device
    28.04.14 09:48:39,817 com.apple.launchd[1]: *** launchd[1] has started up. ***
    28.04.14 09:48:39,817 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    28.04.14 09:55:30,438 hidd[43]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
    28.04.14 09:55:30,439 hidd[43]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    28.04.14 09:55:30,602 com.apple.SecurityServer[25]: Session 100000 created
    28.04.14 09:55:31,684 fseventsd[44]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (3 442 34362)
    28.04.14 09:55:31,738 fseventsd[44]: log dir: /.fseventsd getting new uuid: 4D96DE92-DF6A-4074-A734-C058ACC67177
    28.04.14 09:55:33,000 kernel[0]: VM Swap Subsystem is ON
    28.04.14 09:55:33,000 kernel[0]: Waiting for DSMOS...
    28.04.14 09:55:36,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    28.04.14 09:55:36,000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    28.04.14 09:55:36,000 kernel[0]: NVDAStartup: Official
    28.04.14 09:55:36,000 kernel[0]: init
    28.04.14 09:55:36,000 kernel[0]: probe
    28.04.14 09:55:36,000 kernel[0]: start
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe
    28.04.14 09:55:36,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8216 FirmwareVersion - 0x0207
    28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xe000
    28.04.14 09:55:36,000 kernel[0]: NVDANV50HAL loaded and registered
    28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
    28.04.14 09:55:36,000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
    28.04.14 09:55:36,000 kernel[0]: Previous Shutdown Cause: 5
    28.04.14 09:55:36,000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
    28.04.14 09:55:36,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    28.04.14 09:55:36,000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x6280 -- 0x3800 -- 0xe000 ****
    28.04.14 09:55:36,000 kernel[0]: DSMOS has arrived
    28.04.14 09:55:37,000 kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    28.04.14 09:55:38,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    28.04.14 09:55:38,142 configd[54]: setting hostname to "Susannes-Mac-mini.local"
    28.04.14 09:55:38,147 configd[54]: network changed.
    28.04.14 09:55:38,368 com.apple.SecurityServer[25]: Entering service
    28.04.14 09:55:38,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
    28.04.14 09:55:38,000 kernel[0]: 05f5e100  00500026  NVEthernet::setLinkStatus - Active
    28.04.14 09:55:39,000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0000,0de1,0005,45e1,0000]
    28.04.14 09:55:39,000 kernel[0]: 05f5e100  00500026  NVEthernet::setLinkStatus - Active
    28.04.14 09:55:41,920 digest-service[63]: label: default
    28.04.14 09:55:41,921 digest-service[63]:           dbname: od:/Local/Default
    28.04.14 09:55:41,921 digest-service[63]:           mkey_file: /var/db/krb5kdc/m-key
    28.04.14 09:55:41,921 digest-service[63]:           acl_file: /var/db/krb5kdc/kadmind.acl
    28.04.14 09:55:42,335 mDNSResponder[35]: mDNSResponder mDNSResponder-522.90.2 (Nov  3 2013 18:51:09) starting OSXVers 13
    28.04.14 09:55:42,768 loginwindow[38]: Login Window Application Started
    28.04.14 09:55:43,026 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
    28.04.14 09:55:43,278 airportd[61]: sandbox cache error 3850
    28.04.14 09:55:43,423 digest-service[63]: sandbox cache error 11: database disk image is malformed
    28.04.14 09:55:43,851 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:55:44,005 com.apple.usbmuxd[17]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
    28.04.14 09:55:44,942 digest-service[63]: digest-request: uid=0
    28.04.14 09:55:45,441 airportd[61]: airportdProcessDLILEvent: en1 attached (up)
    28.04.14 09:55:45,729 awacsd[57]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
    28.04.14 09:55:46,356 awacsd[57]: InnerStore CopyAllZones: no info in Dynamic Store
    28.04.14 09:55:46,370 stackshot[21]: Timed out waiting for IOKit to finish matching.
    28.04.14 09:55:47,289 configd[54]: network changed.
    28.04.14 09:55:47,291 configd[54]: network changed: DNS*
    28.04.14 09:55:47,318 systemkeychain[82]: done file: /var/run/systemkeychaincheck.done
    28.04.14 09:55:47,593 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    28.04.14 09:55:47,723 mDNSResponder[35]: D2D_IPC: Loaded
    28.04.14 09:55:47,723 mDNSResponder[35]: D2DInitialize succeeded
    28.04.14 09:55:47,727 mDNSResponder[35]:   4: Listening for incoming Unix Domain Socket client requests
    28.04.14 09:55:48,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xe000 ****
    28.04.14 09:55:48,846 networkd[98]: networkd.98 built Aug 24 2013 22:08:46
    28.04.14 09:55:48,926 digest-service[63]: digest-request: netr probe 0
    28.04.14 09:55:48,927 digest-service[63]: digest-request: init request
    28.04.14 09:55:49,050 digest-service[63]: digest-request: init return domain: BUILTIN server: SUSANNES-MAC-MINI indomain was: <NULL>
    28.04.14 09:55:49,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
    28.04.14 09:55:55,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
    28.04.14 09:55:55,395 WindowServer[80]: Server is starting up
    28.04.14 09:55:55,554 WindowServer[80]: Session 256 retained (2 references)
    28.04.14 09:55:55,554 WindowServer[80]: Session 256 released (1 references)
    28.04.14 09:55:55,619 WindowServer[80]: Session 256 retained (2 references)
    28.04.14 09:55:55,689 WindowServer[80]: init_page_flip: page flip mode is on
    28.04.14 09:55:56,015 mds[34]: (Normal) FMW: FMW 0 0
    28.04.14 09:55:56,075 locationd[40]: NBB-Could not get UDID for stable refill timing, falling back on random
    28.04.14 09:55:56,238 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
    28.04.14 09:55:56,569 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
    28.04.14 09:55:56,571 WindowServer[80]: mux_initialize: Couldn't find any matches
    28.04.14 09:55:56,572 WindowServer[80]: Found 27 modes for display 0x00000000 [24, 3]
    28.04.14 09:55:56,778 locationd[40]: Location icon should now be in state 'Inactive'
    28.04.14 09:55:56,964 WindowServer[80]: Found 1 modes for display 0x00000000 [1, 0]
    28.04.14 09:55:56,995 WindowServer[80]: WSMachineUsesNewStyleMirroring: false
    28.04.14 09:55:56,997 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
    Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
    UUID 0x6077c6f135c4c44ddc359cba2050401d
    28.04.14 09:55:56,997 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28.04.14 09:55:56,998 WindowServer[80]: WSSetWindowTransform: Singular matrix
    28.04.14 09:55:57,421 WindowServer[80]: Display 0x764bdc00: GL mask 0x1; bounds (0, 0)[1280 x 1024], 27 modes available
    Main, Active, on-line, enabled, boot, Vendor 4dd9, Model 2f70, S/N 0, Unit 0, Rotation 0
    UUID 0x6077c6f135c4c44ddc359cba2050401d
    28.04.14 09:55:57,421 WindowServer[80]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    28.04.14 09:55:57,421 WindowServer[80]: CGXPerformInitialDisplayConfiguration
    28.04.14 09:55:57,421 WindowServer[80]:   Display 0x764bdc00: Unit 0; Vendor 0x4dd9 Model 0x2f70 S/N 0 Dimensions 13.31 x 10.63; online enabled, Bounds (0,0)[1280 x 1024], Rotation 0, Resolution 1
    28.04.14 09:55:57,422 WindowServer[80]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    28.04.14 09:55:57,592 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C560 Susannes-Mac-mini.local. (AAAA) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180C9F0 C.C.C.0.7.2.E.F.F.F.E.9.5.1.6.3.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E160 Susannes-Mac-mini.local. (Addr) that's already in the list
    28.04.14 09:55:58,874 mDNSResponder[35]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F931180E5F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
    28.04.14 09:55:59,615 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x0000428b, unit 0, caps QEX|MIPMAP, vram 256 MB
    28.04.14 09:55:59,715 WindowServer[80]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    28.04.14 09:55:59,716 WindowServer[80]: GLCompositor enabled for tile size [256 x 256]
    28.04.14 09:55:59,716 WindowServer[80]: CGXGLInitMipMap: mip map mode is on
    28.04.14 09:55:59,726 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:55:59,801 loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:56:00,154 configd[54]: network changed: v4(en0+:192.168.178.24) DNS+ Proxy+ SMB
    28.04.14 09:56:00,166 configd[54]: setting hostname to "susannes-mini.fritz.box"
    28.04.14 09:56:01,357 awacsd[57]: Exiting
    28.04.14 09:56:02,738 WindowServer[80]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fc9bb513090) - enabling OpenGL
    28.04.14 09:56:03,337 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,383 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,397 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:03,448 ntpd[106]: proto: precision = 1.000 usec
    28.04.14 09:56:03,489 launchctl[126]: com.apple.findmymacmessenger: Already loaded
    28.04.14 09:56:03,785 com.apple.SecurityServer[25]: Session 100004 created
    28.04.14 09:56:04,311 digest-service[63]: digest-request: uid=0
    28.04.14 09:56:04,312 digest-service[63]: digest-request: init request
    28.04.14 09:56:04,316 digest-service[63]: digest-request: init return domain: MACMINI-270CCC server: SUSANNES-MINI indomain was: <NULL>
    28.04.14 09:56:04,363 digest-service[63]: digest-request: uid=0
    28.04.14 09:56:04,364 digest-service[63]: digest-request: init request
    28.04.14 09:56:04,368 digest-service[63]: digest-request: init return domain: SUSANNES-MINI server: SUSANNES-MINI indomain was: <NULL>
    28.04.14 09:56:04,370 UserEventAgent[127]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:56:05,219 loginwindow[38]: Login Window Started Security Agent
    28.04.14 09:56:05,648 SecurityAgent[142]: This is the first run
    28.04.14 09:56:05,649 SecurityAgent[142]: MacBuddy was run = 0
    28.04.14 09:56:05,672 SecurityAgent[142]: User info context values set for susannescherwinski
    28.04.14 09:56:06,399 loginwindow[38]: Login Window - Returned from Security Agent
    28.04.14 09:56:06,427 loginwindow[38]: USER_PROCESS: 38 console
    28.04.14 09:56:06,000 kernel[0]: AppleKeyStore:Sending lock change 0
    28.04.14 09:56:06,970 com.apple.launchd.peruser.501[145]: Background: Aqua: Registering new GUI session.
    28.04.14 09:56:06,996 com.apple.launchd.peruser.501[145]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
    28.04.14 09:56:06,998 com.apple.launchd.peruser.501[145]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    28.04.14 09:56:07,002 launchctl[147]: com.apple.pluginkit.pkd: Already loaded
    28.04.14 09:56:07,002 launchctl[147]: com.apple.sbd: Already loaded
    28.04.14 09:56:07,029 distnoted[149]: # distnote server agent  absolute time: 479.663146784   civil time: Mon Apr 28 09:56:07 2014   pid: 149 uid: 501  root: no
    28.04.14 09:56:07,530 UserEventAgent[148]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
    28.04.14 09:56:07,569 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
    28.04.14 09:56:07,570 com.apple.audio.DriverHelper[161]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
    28.04.14 09:56:07,608 com.apple.audio.DriverHelper[161]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    28.04.14 09:56:07,732 com.apple.SecurityServer[25]: Session 100006 created
    28.04.14 09:56:07,760 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
    28.04.14 09:56:07,793 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:07,820 sharingd[170]: Starting Up...
    28.04.14 09:56:07,954 WindowServer[80]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    28.04.14 09:56:08,649 WindowServer[80]: Display 0x764bdc00: Unit 0; ColorProfile { 2, "SDM-HS74"}; TransferFormula (1.000000, 1.000000, 1.000000)
    28.04.14 09:56:09,364 com.apple.IconServicesAgent[201]: IconServicesAgent launched.
    28.04.14 09:56:09,577 accountsd[202]: assertion failed: 13C1021: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
    28.04.14 09:56:09,719 com.apple.SecurityServer[25]: Session 100009 created
    28.04.14 09:56:10,587 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
    28.04.14 09:56:10,588 WiFiKeychainProxy[182]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    28.04.14 09:56:10,847 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68855c320 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
    28.04.14 09:56:10,864 SystemUIServer[156]: Cannot find executable for CFBundle 0x7fb68847aab0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
    28.04.14 09:56:12,097 imagent[189]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:12,122 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
    28.04.14 09:56:12,123 imagent[189]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
    28.04.14 09:56:12,163 soagent[184]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:12,181 soagent[184]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:12,184 soagent[184]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:12,417 secd[207]:  __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
    28.04.14 09:56:12,417 secd[207]:  __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
    28.04.14 09:56:12,639 secd[207]:  SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    28.04.14 09:56:12,639 secd[207]:  securityd_xpc_dictionary_handler WiFiKeychainProx[182] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
    28.04.14 09:56:12,944 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    28.04.14 09:56:22,465 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,038 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,156 soagent[184]: Killing soagent.
    28.04.14 09:56:23,156 NotificationCenter[181]: SOHelperCenter main connection interrupted
    28.04.14 09:56:23,159 NotificationCenter[181]: SOHelperCenter main connection interrupted
    28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:184)
    28.04.14 09:56:23,160 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:184)
    28.04.14 09:56:23,314 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:23,316 mds[34]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    28.04.14 09:56:24,403 parentalcontrolsd[216]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
    28.04.14 09:56:33,245 com.apple.time[148]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    28.04.14 09:56:33,310 soagent[217]: [Warning] Services all disappeared, removing all dependent devices
    28.04.14 09:56:33,318 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:33,467 com.apple.dock.extra[212]: No endpoint returned trying to load UnreadCountController.bundle, suspending
    28.04.14 09:56:33,493 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:33,494 soagent[217]: No active accounts, killing soagent in 10 seconds
    28.04.14 09:56:44,319 soagent[217]: Killing soagent.
    28.04.14 09:56:44,320 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
    28.04.14 09:56:44,322 com.apple.dock.extra[212]: SOHelperCenter main connection interrupted
    28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:217)
    28.04.14 09:56:44,324 imagent[189]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver  (soagent:217)
    28.04.14 10:00:56,532 WindowServer[80]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    28.04.14 10:00:57,256 WindowServer[80]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.72 seconds (server forcibly re-enabled them after 1.00 seconds)
    28.04.14 10:00:59,103 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x42d] flags: 0x8 binding: FileInfoBinding [0x1f3] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
    28.04.14 10:00:59,104 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:64 scale: 1
    28.04.14 10:00:59,143 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x3df] flags: 0x8 binding: FileInfoBinding [0x2e5] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
    28.04.14 10:00:59,144 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:64 scale: 1
    28.04.14 10:00:59,208 com.apple.IconServicesAgent[201]: main Failed to composit image for binding VariantBinding [0x1f5] flags: 0x8 binding: FileInfoBinding [0x42f] - extension: mp3, UTI: public.mp3, fileType: MPG3.
    28.04.14 10:00:59,208 quicklookd[227]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: mp3, UTI: public.mp3, fileType: MPG3 request size:64 scale: 1
    28.04.14 10:01:03,377 mds[34]: (Normal) Volume: volume:0x7f9c5c863000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.S2FNIL
    28.04.14 10:01:17,708 System Events[269]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
    28.04.14 10:01:17,709 System Events[269]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
    28.04.14 10:01:24,175 Safari[219]: ERROR: ForceShrinkPersistentStore_NoLock -delete- We do not have a BLOB or TEXT column type.  Instead, we have 5.

    Anybody?
    Did I something wrong? Too many lines of log? Wrong category? Enlighten me. Thx.

  • AP1231G-A-K9 access points - very slow throughput - Is TKIP the issue?

    I recently setup our small office network using the following setup:
    Cablemodem <--> router <--> 1231AP(role root bridge with wireless clients) <-> 1231AP(role non-root bridge with wireless clients)
    Code on both APs: 12.3(8)JEE
    Office network generally has less than 3 wireless clients connected at any one time to either AP.
    AP's are a mere 50' apart; clients are all less than 30' from either AP; they all show excellent signal and connected at 54mbps signaling rates.
    All is/has been working very well & very stable with the exception of speed. We have business class service from RR, approx 25mbps dl, 2mbps ul. Any hardwired client to the router switch ports are able to download at speeds averaging 23mbps. Any wireless client connected to either AP is never able to exceed download speeds of 5mbps. With no other wireless clients connected except my one test client, I was not able to exceed 5mbps throughput from either AP that I connected to.
    I can confirm that the ethernet connection between the router and root bridge is up at 100mbps-FD and not showing any errors:
    ap#sh interfaces FastEthernet0
    FastEthernet0 is up, line protocol is up
      Hardware is PowerPC405GP Ethernet, address is 0013.60cf.bb29 (bia 0013.60cf.bb29)
      MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Full-duplex, 100Mb/s, MII
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input 00:00:00, output 00:00:00, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/160/0/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 5000 bits/sec, 0 packets/sec
      5 minute output rate 1000 bits/sec, 1 packets/sec
         8054605 packets input, 3141009145 bytes
         Received 46005 broadcasts, 0 runts, 0 giants, 0 throttles
         0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
         0 watchdog
         0 input packets with dribble condition detected
         4076106 packets output, 411952731 bytes, 0 underruns
         0 output errors, 0 collisions, 4 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier
         0 output buffer failures, 0 output buffers swapped out
    Wandering thru the cli on either AP shows that all wireless clients are indeed connected at 54mbps to their respective AP and the two AP's are connected happily at 54mbps signaling:
    Address           : 0013.1a37.b3e0     Name             : ap
    IP Address        : 192.168.0.120      Interface        : Dot11Radio 0
    Device            : 11g-bridge         Software Version : 12.3
    CCX Version       : NONE
    State             : Assoc              Parent           : Our Parent        
    SSID              : Tsunami
    VLAN              : 0
    Hops to Infra     : 0                  Association Id   : 44
    Tunnel Address    : 0.0.0.0
    Key Mgmt type     : WPA PSK            Encryption       : TKIP
    Current Rate      : 54.0               Capability       : WMM ShortHdr ShortSlot
    Supported Rates   : 1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
    Voice Rates       : disabled
    Signal Strength   : -51  dBm           Connected for    : 75169 seconds
    Signal to Noise   : 26  dB            Activity Timeout : 14 seconds
    Power-save        : Off                Last Activity    : 1 seconds ago
    Apsd DE AC(s)     : NONE
    Packets Input     : 1050695            Packets Output   : 296536   
    Bytes Input       : 474651248          Bytes Output     : 96734573 
    Duplicates Rcvd   : 0                  Data Retries     : 63646    
    Decrypt Failed    : 0                  RTS Retries      : 0        
    MIC Failed        : 0                  MIC Missing      : 0        
    Packets Redirected: 0                  Redirect Filtered: 0
    Here is a config snippet from the AP non-root bridge with wireless clients:
    dot11 ssid Tsunami
       authentication open
       authentication key-management wpa
       guest-mode
       infrastructure-ssid optional
       wpa-psk ascii 7 (snipped)
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers tkip
    ssid Tsunami
    speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role non-root bridge wireless-clients
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address dhcp client-id FastEthernet0
    no ip route-cache
    bridge 1 route ip
    (The AP root-bridge with wireless clients config is identical to this config with the exception of the station-role and a static IP on the BVI1 interface.)
    Are these very slow thoughput speeds normal of this hardware combination?
    I did much searching/googling and found claims that by eliminating TKIP it almost doubles the actual wireless speeds our clients can obtain. Is there any truth to this?
    Any suggestions or recommendations without changing hardware would be very welcome.
    Thanks in Advance!
    D.
    =============

    Ok, thanks for the explanation - I understand. But even at a 22mbps signaling rate shouldn't I be seeing throughputs greater than 5-5.5mbps especially since this location is literally 100% free of any outside interference and the interfaces definitely show the clients and non-root bridge (when connected) all being at the highest rate of 54mbps? I tried even in the same room, approximately 40' away, total line of sight, no obstructions, between my laptop and the root AP.
    I disconnected the non-root bridge and connected directly to the root bridge during my testing. I was still only able to achieve approx 5.5mbps download. Adding back in the non-root bridge and re-connecting to it I notice slightly lower throughput, approx 5mbps. During testing, my laptop was the only device connected to the network, all other clients were shut off.
    Here are the int stats (I've never reset the counters):
    Root Bridge:
    RATE 1.0 Mbps
    Rx Packets:           2178725 /  49    Tx Packets:                   39 /   0
    Rx Bytes:            335124036 /7595    Tx Bytes:                   4965 /   0
    RTS Retries:               61 /   0    Data Retries:                  5 /   0
    Non-Root-Bridge:
    RATE 1.0 Mbps
    Rx Packets:           2323120 /  50    Tx Packets:                  141 /   0
    Rx Bytes:            336455923 /7595    Tx Bytes:                  17869 /   0
    RTS Retries:                2 /   0    Data Retries:                 56 /   0
    All the other rates, 2-12mbps show single or double digit packet/byte counts until I get to the 36mbps section of each interface:
    ap#sh int Dot11Radio0 stati
            DOT11 Statistics        (Cumulative Total/Last 5 Seconds):
    (snipped for brevity)
    Root Bridge:
    RATE 36.0 Mbps
    Rx Packets:            915395 /   1    Tx Packets:              2345589 /   9
    Rx Bytes:            93420936 /  70    Tx Bytes:             3370791285 / 874
    RTS Retries:                0 /   0    Data Retries:             573981 /   4
    RATE 48.0 Mbps
    Rx Packets:           2163192 /   2    Tx Packets:               216861 /   0
    Rx Bytes:            222455730 / 404    Tx Bytes:              182817967 /   0
    RTS Retries:                0 /   0    Data Retries:             106808 /   0
    RATE 54.0 Mbps
    Rx Packets:            987986 /   0    Tx Packets:               168923 /   0
    Rx Bytes:            190467269 /   0    Tx Bytes:               61665042 /   0
    RTS Retries:                0 /   0    Data Retries:              34424 /   0
    Non-Root Bridge:
    RATE 36.0 Mbps
    Rx Packets:           2368679 /   0    Tx Packets:               965419 /   0
    Rx Bytes:            3396819830 /   0    Tx Bytes:               90880825 /   0
    RTS Retries:                0 /   0    Data Retries:             242686 /   0
    RATE 48.0 Mbps
    Rx Packets:            341870 /   0    Tx Packets:              2156282 /   1
    Rx Bytes:            216497093 /   0    Tx Bytes:              215775536 / 210
    RTS Retries:                0 /   0    Data Retries:             478619 /   0
    RATE 54.0 Mbps
    Rx Packets:           1469926 /  15    Tx Packets:              2529678 /  15
    Rx Bytes:            411722698 /1122    Tx Bytes:             1366306113 /5159
    RTS Retries:                0 /   0    Data Retries:             198532 /   0
    I will try disabling the rates below 12mbps and re-test.
    I would like to try disabling all encryption and try as well.
    Do you know if the AP's will associate if there is zero encryption?

  • Window 8.1 Running very slow

    Dear Team
    I am using window 8.1 Pro & office 2013 ,which is running very slow in system , kindly suggest me what  should i do regarding this problem
    Regards
    Saurabh
    Cont No-9997255621

    I had a similar issue with 8.1 early on, looked at task manager and disk was at 100% most of the time upgraded to a newer Hard drive problem was solved, the first hard drive was a slower and smaller cache drive.

Maybe you are looking for

  • Dynamic sql and bind variables

    Hi, I have a stored procedure which filters a table on 5 five columns. The filters come from the input parameters, and these 5 parameters can come in any combination, I mean some of them may be null and some of them may not be null. So I constructed

  • Keybord doesn't work correctly (Satellite Pro 6000)

    hi, I've a Problem with the keyboard of my SP6000: when I press "3" I get "93"; "d" ==> ".d"; "e" ==> "oe". When I hold "3" I get "93333333333333333" a.s.o. I've allready changed the keyboard, without success. I get this Problem with XP, Knoppix and

  • Trying to link my Kobo with ADE and my Macbook

    I just downloaded ADE to my Macbook (version 10.5). I was able to authorize my computer and my Kobo, but my kobo doesn't show up on ADE anymore. When it was linked was only reading the kobo info, not the book I had purchased. Cannot figure out how to

  • Two column telephone directory style report

    Does anyone have an example of a two column telephone directory style report (2.0,2.5,3.0 or 6.0) that they would be willing to share? Thank you. Bill Harman null

  • Compressor no longer opens

    I have Final Cut Studio 2 with Compressor 3.05. After many months of perfect performance, recently, when exporting video from Final Cut to Compressor, nothing would happen after I pressed Submit. And if I open Compressor by itself, it stalls on the s