MDT / WDS Computers joining the network with correct computer name, but no drivers (including NIC) installed

I'm using WDS and MDT to install the computers in my network.
I recently reinstalled a server 2012R2 with the last available versions of WDS and MDT. Everything works fine except for the fact that none of my computers (different series) is installing the out of the box drivers in windows.
The network connection although is ok during setup because the computers add to the domain with the given computer name.
I'm sure I'm using the correct drivers and in my task sequence I enabled to inject all drivers.
Ideas?

Hi admin0485,
I am not very familiar with MDT, if you used the MDT to install the drivers we can ask in the specific MDT support forum, if you are using WDS to install drivers please recheck
your drivers architecture compatible with your system, we can not use the x64 driver on x86 image.
More information:
Managing and Deploying Driver Packages
http://technet.microsoft.com/en-us/library/dd348456(v=ws.10).aspx
MDT support 
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Hi there!  We just got an ipod touch 8G.  We have wireless internet, but can't join the network with the ipod touch!  Very frustrating and we have tried all of the troubleshooting suggestions on the support site.  Help!  The router is a linksys WRT120N.

    Hi everyone!  WE just got an ipod touch 8G.  We do have wireless internet, but can't join the network with the ipod touch.  Message comes up.."unable to join the network".....very frustrating!  We have tried all trouble-shooting suggestions on the site, but nothing is working.  Anyone out there got any ideas for us??  The router is a Linksys WRT120N.
    Thanks for any help any one can give!!!

    Does the iPod connect to other neworks?
    Do other devices connect to the network?
    What encryption are you using?
    How you tried changing the type of encruption? Changing to no encryption?

  • I have just converted from PC to iMac. Yay. But pls be nice to me; I am back to newb! Running Lion. Have connected a Time Capsule as both a backup and WAP. I want to be able to join the network with my iPad, iPhone, iPod to print. How can I do this?

    Can I do this using the Time Capsule. I am not tech, so bear with me. Can I get the iPad to connect wirelessly to the TC, which connects wirelessly to the Canon MP495? Or, can I connect/network the iPad to the iMac to print?
    Either way, or if there is any other solution, I would appreciate if someone would walk me through it, or point me to a plain-speaking resource.
    Thankyou.
    Actually, one more: I would like to connect my HP laptop as well. I have heard this is not simple, but possible.

    You can create a wifi network with your TC, and you can join this network with your iPad. However, your printer does not support the AirPrint protocol, so you will not be able to print from your iPad, unless you load additional software.
    These are the steps:
    1.  (You may have completed this step already) Set up your TC to create a wireless network. You can do this from AirPort Utility on your Mac or from the AirPort Utility App on your iPad (free download from the App Store).
    2. From your iPad, go to settings / wifi and join the network.
    3. Download the Canon iPhone App from the App store on your iPad
    4. You can now print photos from your iPad to your Canon printer.
    If you want full functionality, (not just photos), there is software for your Mac that makes your printer available to your iPad through AirPrint (Printopia). The downside is, you have to purchase it, and you have to have your Mac running when you want to print from your iPad.
    Good luck!

  • New iphone.  Trying to join family network with correct password.  Says unable to join

    I have a new iPhone.  I am trying to join my wireless network with the correct password.  I get the error message "Unable to join...".  My network is fine, because my itouch works OK.  Any hints?

    Hi jrzldy,
    Here are some troubleshooting tips that may help to resolve your issue:
    http://support.apple.com/kb/TS1398
    Cheers,
    GB

  • How i can export and distribute setting; network.automatic-ntlm-auth.trusted-uris" to all computers in the network (With Folder Rederiction enabled)?

    Hi,
    We are about to enable SSO in our environment. As a result, I need to modify the value for user_pref("network.automatic-ntlm-auth.trusted-uris", "my domain");>>prefs.js.
    I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file it outputs the prefs.js to the same location, not the Mozilla AppData folder. We are a Win7 environment with folder redirection enabled. Therefore, our user's Mozilla AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (random default profile name). My question is what is the best course of action to add this pref. to all PC user's pref.js file? keep in mind the pref.js is located on the hidden network path I included above. I apologize if my question is not easy to understand.

    cor-el, thanks for you reply.
    Yesterday, prior to my post, I did try the mozilla.cfg method. I read your reply to another FF user's, similar question. Here are my complete steps.
    1. created a txt file with the following info: defaultPref("network.automatic-ntlm-auth.trusted-uris", "ngs.org"); // set new default value
    2. saved the file as mozilla.cfg
    3. dropped the file in C:\Program Files (x86)\Mozilla Firefox
    4. Created local-settings.js with the following info:
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    5. dropped the file in C:\Program Files (x86)\Mozilla Firefox\defaults\pref
    When I launch Firefox the network.automatic-ntlm-auth.trusted-uris should say ngs.org, but the value is still blank.
    Any help is greatly appreciated.

  • Can't Send Email or Connect to Computers on the Network with my MacBook

    Problem started yesterday... I have a 1.83GHz MacBook that will not connect to file share or printer share with my other mac. It will also not send any emails on any of my accounts, although it will receive email. Any idea why this is?

    Go to System Preferences and then head to Sharing. See if there's anything weird there.

  • Connecting a AX-G to Join a network with a cable to another AX-N

    1)   Airport   AX-G (Base Station) connected to a cable modem
    2)   Another AX-G ( Remote) Both are on the same network all set on a WDS
    3)   I want to join the network with a 150 Ethernet cable connected to AX-G (remote) to another AX-N to get more wireless signal from the AX-N.
         Is this Possible i have tried everything and have had no luck. Can i make the AX-N be the base station and then used the  AX-G's  with the cable to join
         the network.
    Any suggestion feel free.
    THX

    You would not want to setup the AX-N to "join". It provides no wireless coverage at all in that setting.
    Here is how your settings should look on the AX-N:
    Open AirPort Utility - Click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode = Create a wireless network
    Wireless Network Name = Same name as your "main" network if you want the new AX-N to act as if it were part of the same network. Otherwise, assign a different wireless network name (which will require that you log on to the AX-N network separately)
    Radio Mode = 802.11n (802.11b/g compatible) a good choice
    Channel = Automatic
    Wireless Security = Exact same setting as your "main" network
    Wireless Password = Same password as your "main" network
    Confirm Password
    Click the Internet icon
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)......(you may be a bit surprised to see that the AX-N was likely not in bridge mode as you thought)
    Update to save settings and allow 40-45 seconds for the AX-N to restart
    You should have a green light
    Then, power down the entire network....all devices....order is not important
    Power up the modem first and let it run a few moments
    Power up the "main" AX next and let it run a minute
    Power up the "remote AX" next the same way
    Power up the AX-N the same way
    Power up other devices one at a time the same way
    You should have one large wireless network if you chose to assign the same wireless network name to the AX-N device.
    Please post on your results

  • I changed the password on my WiFi network and can't get my Airport Express to join the network

    AT$tT recently replaced my DSL modem with a modem/router. I was able to reset my Airport Express gen1 to join the network. Then I changed my network password  and cannot get it to reconfigure to join the network with a new password. Suggestions?

    Next time you want to change the network password.......change it on the Express first....and then on your main router. Then, as soon as you restart the main router, the Express already has the settings that it needs to join the network and it will join with no problems.
    Now, you must reset the Express back to factory default settings and then set it up again. To do that......
    Power off the Express for a minute
    Hold in the reset button first, and keep holding it in for an additional 10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the 10 second hold, and allow a full minute for the Express to restart to a slow, blinking amber light status
    The Express has now been reset and you can reconfigure it to join your "new" network now.

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • I have a new iPad 2 which will not connect to my wi fi despite a new router being installed. When I tap my network name (which is with TalkTalk) the message comes up "unable to join the network TalkTalk etc...)

    I have a new Apple iPad2 which will not connect to my wi fi despite a new router.  When I tap the correct address it comes up with the message "Unable to join the network TalkTalketc... It does connect in other peoples' houses . Am I right in thinking that the trouble is with TalkTalk?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • We have a PC with iTunes that needs the hard drive reformatted. Right now, it can't connect to other computers on the network. Can I save my music to a thumb drive, then re-load when the computer is reformatted?

    We have a Windows XP desktop with iTunes for windows. The hard drive needs to be reformatted. Right now, the computer will not connect to other computers on the network. Can I save my iTunes songs to a thumbdrive, then re-load after reformatting?  How do I do it?

    Copy the entire iTunes folder out to the drive. If it is too big to go as one copy stuff over to another computer in batches. It is important to have not only the media but the library file in order to properly restore your library.
    See also this User Tip. Assuming the machine won't connect to the internet you could download the SyncToy installer on another machine and then transfer it with the thumb drive. If it will connect to the net don't forget to deauthorize the machine before reformatting the hard drive.
    tt2

  • After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank you

    After getting 4G with AT&T I am unable to join my network and get the error message: Unable to  join the network "Jude". How do I fix this? Thank yo

    Try power-cycling your wireless router (unplg for 30 seconds, plug back in).  Here's a longer list of troubleshooting steps: http://support.apple.com/kb/TS1398.

  • I have an iPad 2 v6.1.3 that has a problem with connecting to wi-fi.  My other I macs have no problem with connecting.  The pad keeps coming up with unable to join the network. Nothing has changed with passwords--it just refuses to join my secure network.

    My other Imacs and my wife's Ipad 3 have no problem with conneccting.  My Ipad keeps coming up with unable to join the network.  Nothing has changed with passwords--it just refuses to join my secure network.  A couple minutes ago, it connected for 10 seconds, then dropped the connection.  Is there a way to reconfigure the Ipad to fix this major problem, as we dropped our carrier (saved a bunch of money) and just went wifi.
    Thanks so much for any help with resolving my connection problem.
    Gary

    Hello jaxgaryj,
    The following article provides a number of potential resolutions for your WiFi issues.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • HT1145 i am unable to connect to my wi-fi  it is telling me \unable to join the network  (applenotebook)  my other laptops join with no problem   help!

    I am unable to connect to wi-fi with my applenote book... had no problem a week ago.. its telling me    unable to join the network   my other laptop works ok
    tried turning it off

    Are you using an Apple AirPort Base Station? Try restarting it, as well as your laptop.

  • Iphone3g 2.01 - wlan: unable to join the network "xyz" with netgear dg834n

    i m not able to connect to my netgear dg834n with my new iphone.
    every time i´m trying it i get this error:
    unable to join the network "xyz"
    tests i did:
    - restart of iphone
    - reboot of iphone
    - switching of security (and mac address control) on netgear
    - tryout of all wlan security combinations on netgear
    - turned netgear off and tried again
    - dhcp and manal settings on iphone for tcp/ip (netgear has dhcp enabled)
    i m using the newest available firmware for dg834n
    any help ?

    Add me to the list. . .and it happened right after the upgrade to 4.2.1. . .
    Coincidence or just just a factor of wear and tear. I've tried 3 calls to Apple and they say the phone needs to be replaced.
    A bunch of youTube videos watched and instructions followed to no avail.
    It seems that the wireless portion of the circuit board connection is prone to cracking in the iPhone. I'm finding references to this gremlin dating all the way back to 2008. I'm wondering if there is a connection with high swings in temperature of surroundings. One clue to whether cracking exists on Circuit board connections is to pop your phone into a freezer for about 10 minutes and see if this permanently or temporarily allows the phone to be able to connect. . .
    The only successful fix I've seen is reflowing the Circuit board by putting it in the oven but that takes a couple of shots of good vodka before seriously trying that. . .There are plenty of Google links on both the preparation and the fix. . .8^]

Maybe you are looking for

  • DIFFERENT ACCOUNTS DIFFERENT PROFILES

    I HAVE TWO ACCOUNTS IN  A BB 8310 WORKING RIGHT. I WANT CONFIGURE DIFFERENT TONES FOR MESSAGES RECEIVED ON EVERY ACCOUNT. WHEN I AM IN "PROFILES", IT SHOWS THE TWO ACCOUNTS: ONE BES AND ONE BIS I TRY CONFIGURE THE BES WITH A TYPE OF TONE AND THE BIS

  • How debug a routine create in InfoPackage for Data selection ?

    Hi everybody, I decide to debug a routine create in InfoPackage. Here, the name of my ABAP routine: program conversion_routine form compute_TREATMENT_DATE When i execute the "/h" command to launch debugger, i don't see this routine in Call Stack... H

  • Project file will not open

    I have  project file that will not open-and crashes LOGIC X everytime I try. Can I salvage this? BTW I FIND THIS NEW LOGIC X VERY BUGGY AND IT CRASHES ALL THE TIME. I always send in the report to Apple, to no avail. I might go back to 9.

  • Crunmmy photo quality in Safari

    I get poor quality photos quality using Safari in any site.No problem with Firefox.My daughter running e-Mac with same Mac system no problem with Safari. New to Mac and a bit disappointed,I thought Mac were the tops for graphics & photos.Any ideas pl

  • Powerbook G4 17 inches 1.67GHz support DDR2?

    Just got a powerbook G4 inch 17 inches 1.67GHz. I want to upgrade its memory. I found from Curcial.com that there're both Powerbook 17 1.67Ghz DDR and DDR2. Anyone knows it possible DDR2 memory?