MDX Parser error
Hello,
While checking the MDX Parser connection in TR SM59, I get the following error...
Error occurred when starting the parser: Error opening an RFC connection.
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System response
Error opening an RFC connection.
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
===================================
The same TCP/IP connection (with similar properties in working in other BW system). But giving error in the system where I am trying to write some MDX statement (TR MDXTEST). It goes to debug mode as soon as MDX statement is executed in MDXTEST.
Regards
Pankaj
Your RFCDestination is not correct. Please check it in SM59.
The program specified there may not be on the app server. Have you verified this already?
cheers,
Similar Messages
-
MDX Parser Error in Data Mining
Hello Colleagues,
I have created the Application Process Designer(APD) for ABC analysis. Here APD is saved and activated successfully. Now while executing, it fills the data to datatarget, but giving error "Error occurred in starting the PARSER.Error opening in RFC connection. Syntax error in MDX statement".
In help, it says go to SM59 and test the connection of MDX parser. Now there testing is failing, but What I need to do to correct the connection?
RegardsHello,
please read the OSS note: 149809
Hope this helps
Michael -
Connection Test MDX PARSER - Error
Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM -
MDX Parser: Error during allocate
Hi, I'm trying to create some WebI reports over BW Queries, but when I try to refresh the WebI document, it throws an error that more less says "timeout during allocate / CPIC-CALL: ThSAPCMRV", I know that Note 1032461 is related, but unfortunately I don't know where to find the librfc32.dll by itself on SAP Support portal, the path defined in such note is no longer valid.
I copied librfc32.dll from c:\windows\syswow64 to E:\usr\sap\<SID>\SYS\exe\uc\NTAMD64, and tried to run manually the mdxsvr with the line suggested on the note
mdxsvr -amdxparser -g <host> -x <gateway> -t
but get the error: This application has failed to start because LIBRFC32.DLL was not found
I seems to be a problem with the adequate version of librfc32.dll (version on system32 is 6405.5.318.6424, while the one on syswow64 is 7200.1.39.6461
The mdxpars.dll is version 7010.0.4300.27
I am also aware of note 1434994, where it describes a required update on the BW 7.20 SP, the current version of mdxpars.dll is 7010.0.4300.27
Any suggestions?Hi,
I would suggest you open a case with support so that you can get the right DLL for your environment
ingo -
Hi,
I am getting the following error when I test connect the MDX Parser RFC destination.
Logon -> Cancel
Error Details -> connecton closed (no data)
I have upgraded the latest mdxsvr.exe and mdxpars.dll in the kernel directory and also got the librfc32.dll in the kernel. I got updated librfc32.dll in the registry also. I checked various SAP notes, but none helped.
The main problem was when starting MDX parser:
===============================
Error occurred when starting the parser: connection closed (no data)
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
connection closed (no data)
=================================
Pls give any inputs on this.
Thanks,
Abdulthis could be because the RFC destination host is not maintained in the hosts file on the application servers... check that you can reach the host and see if that fix your issue.
Regards
Juan -
Error in remote call of destination MDX PARSER.
Hi friends,
creaed one req for importing appset into target system, while importing req (Operating systgem) getting error message.
Error in remote call of destination MDX PARSER.
what might be reason ?
Thanks,
NareshThis is caused by RFC user being set as for a standard Client-Dependent Objects transports.
Add the profile S_BI-WX_RFC to user(used for import request) -
SAP integration kit - MDX parser does not exist
Hi,
While running a query via Web Intelligence, during the process where data should be retrieved, the error pops up that RFC destination MDX PARSER does not exist.
The universe is built on an infoCube without intermediate BEx query.
I know about the existence of note 1032461, but it didnu2019t get us further:
- Librfc32.dll (the one included during KIT installation) is at the right place.
- MDX BW Driver was included in transports.
- A RFC connection test via sm59 was positive.
Anybody who had same error or having tips?
All help would be highly appreciated since this should be fixed asap.
Here some additional questions:
1) why program mdxsvr is listed in unix directory (visible via al11), and not on BO server site?
2) The librfc32.dll file included in the installation has a lower patch number then the patch number when downloading from sap marketplace.
Is this important even when Patch Level is the same? So still necessary to change this file with version separately downloaded?
3) Is it necessary that MDX is added to the BW internet communication framework (transaction SICF sap bw bex, Mime, xml, and also MDX necessary?)
4) Should the BW system be added to the broadcasting availability (spro)?
5) Could this indicate a problem with the java connector?
6) We created a RFC connection following the advice about BO-BW connection. But, is there need of an additional connection called u2018MDX Parseru2019. If yes, where do I find info how-to?
Here the full error:
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS , [0COMP_CODE].[LEVEL00].MEMBERS DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [ZCO_PA_2/ZCOPA_DAILY_AGGR] SAP VARIABLES [0P_FPER] INCLUDING [0FISCPER].[K42010001] [ZCURR1] INCLUDING [0CURRENCY].[EUR] failed to execute with the error Error occurred when starting the parser: RFC destination MDX PARSER does not exist.. (WIS 10901)Hi,
hhmm - i can still see it and status is "released to customers"
If you have a S-User and pwd use this link:
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132363135303726
Regards
-Seb. -
APD failure due to MDX Parser starting issue
Hello,
As part of BW on HANA migration, we have recently migrated Dev system to HANA database and during testing we have issue for one of the APD's
which when triggered failed with the below error messages: Error occurred when starting the parser:timeout during allocate / CPIC- CALL: 'ThSAPCMRCV' Syntax error in MDX statement Termination: Error when executing the query Processing was canceled And the RFC connection for MDX PARSER was also failing. Subsequently, basis implemented the SAP Note 1032461 - MDX parser does not start. Which resolved the issue with the RFC connection. However, the APD is still failing. The error message we get is as below for the same: Error occurred when starting the parser: Function RRTS_PARSE_MDX is not available Syntax error in MDX statement Termination: Error when executing the query Processing was canceled. Request your help on the same.
Most of the SDN forums on this topic advised on the SAP Note 1032461. However, despite implementing the same note our basis team couldn't succeed in resolving the issue. Thank you!Hi Meduru Avinash,
As you rightly told, most of the time note 1032461 is referred to solve this issue.
Some where I have read that we need to refer 638701 also,
like adding gw/cpic_timeout in your system, if it is not available.
BR
Prabhith -
Hi to all
i have make a console application in MS enviroment that to retrieve data from BW enviroment bye SAP.Net Connector. When i test my console application appeare the next error message:
Parser Error timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'"
I have test this application from a machine that don't have any SAP Installation (so not there are the files librfc32.dll, mdxsvr.exe and mdxpars.dll), so how can i solve this situation?
Thanks in advance
EnricoI am encountering this issue as well. How does the librfc32.dll register in an x64 environment.?
MDX parser fails on all SAP environments from ECC to BI7...... -
hello all,
can anyone tell me what is MDX parser?
through sm59 MDX parser can be configured but i have no authorization of sm59.
i am facing this error while executing the APD.
Please suggest as i am facing this issue from long time with no solution.
Thanks,
Kumkumhi,
can you please elaborate about MDXTEST tcode.
if i drag and drop the inobject used in the query in the right panel of MDX test editor then it shows the same error as it shows while executing the APD i.e.
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
Thanks,
Kumkum
Edited by: kumkum basu on Jun 17, 2010 11:01 AM -
Hi
I am getting connection error in RFC Destination MDX PARSER. Error is that the program does not exit in the system. Can you please tell what does this program contain or how to find this program.
Regards
Lalit K TyagiWhy the program name should be same as the class name
in which main is declared.
Eg:
class Test
public static void main(String args[])
System.out.println("Hello World");
program name: Test.java // Why so.In your case, since the class is not public, I figure you could name it to something else too, like Untest.java. You would need the actual class name only while executing - java Test -
XML Parse error while loading an XML file
HI Folks,
I was trying to load and XML file into BODS.. The XML file is well-formed and the same when tested in other tools is getting loaded without any issues..
I have created a XML-File format with the corresponding XSD..
But here in BODS it is giving - Parse error
1) when i try to view the data of the source XML in my dataflow ..it is giving "XML Parser Failed".. and not able to show data..
2) When I run my job i get the same pares error - with details as under..
---> Error here is "Unable to recognize element 'TAB' " or some time is say " Element TAB should be qualified"
Please guide with this if you have any info..thanks
I'm pasting the XML source file format here for your reference:--
<?xml version="1.0" encoding="iso-8859-1" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
- <TAB>
- <items>
+ <CUSTOMER_RECORD>
<CUSTOMER_NUMBER>1111111111</CUSTOMER_NUMBER>
<NAME_1>ABC</NAME_1>
<NAME_2>OFM/COMMERCIAL ACCOUNTS</NAME_2>
<STREET_1>31 CENTER DRIVE MCS2045</STREET_1>
<STREET_2 />
<CITY>BETHESDA</CITY>
<STATE_CODE>MD</STATE_CODE>
<POSTAL_CODE>20892-2045</POSTAL_CODE>
<COUNTRY_CODE>US</COUNTRY_CODE>
<ORDER_BLOCK />
<ERP_CREATE_DATE>20040610</ERP_CREATE_DATE>
<ERP_CREATED_BY>DGUPTA</ERP_CREATED_BY>
<ERP_MODIFY_DATE>20120201</ERP_MODIFY_DATE>
<ERP_MODIFIED_BY>LWOHLFEI</ERP_MODIFIED_BY>
<INDUSTRY_CODE>0103</INDUSTRY_CODE>
<ACCOUNT_GROUP_ID>0001</ACCOUNT_GROUP_ID>
<SALES_NOTE />
<ADDRESS_NOTE />
<CUSTOMER_CLASSIFICATION_CODE>02</CUSTOMER_CLASSIFICATION_CODE>
<GLN_NUMBER />
<PREVIOUS_ACCT_NO />
<ACCOUNT_TYPE />
<GAG />
<SDI_ID />
<HOSP_ID />
<HIN />
<DUNS />
<PO_BOX />
<POB_CITY />
<POB_ZIP />
<PHONE_NUMBER>77777</PHONE_NUMBER>
<EMAIL_DOMAIN />
<REQUESTER />
<ERP_SOURCE_SYSTEM>ECC</ERP_SOURCE_SYSTEM>
</CUSTOMER_RECORD>
- <SALES_ORG_DATA>
+ <item>
<CUSTOMER_NUMBER>1111111111</CUSTOMER_NUMBER>
<SALES_ORG>0130</SALES_ORG>
<CUSTOMER_GROUP>03</CUSTOMER_GROUP>
<ORDER_BLOCK_CODE />
<ERP_SOURCE_SYSTEM>ECC</ERP_SOURCE_SYSTEM>
</item>
+ <item>
<CUSTOMER_NUMBER>1111111111</CUSTOMER_NUMBER>
<SALES_ORG>0120</SALES_ORG>
<CUSTOMER_GROUP>11</CUSTOMER_GROUP>
<ORDER_BLOCK_CODE />
<ERP_SOURCE_SYSTEM>ECC</ERP_SOURCE_SYSTEM>
</item>
</SALES_ORG_DATA>
</items>
</TAB>
</asx:values>
</asx:abap>Pierre,
Depending on the object "myLastFile", the method openDlg might not even exist (if the myLastFile object is not a File object, for instance). And I do not see any need for the myLastFile anyhow, as you are presenting a dialog to select a file to open. I recommend using the global ChooseFile( ) method instead. This will give you a filename as string in full path notation, or null when no file was selected in the dialog. I am not sure what your ExtendScript documentation states about the return value for ChooseFile, but if that differs from what I am telling you here, the documentation is wrong. So, if you replace the first lines of your code with the following it should work:
function openXMLFile ( ) {
var filename = ChooseFile ( "Choose XML file ...", "", "*.xml", Constants.FV_ChooseSelect );
While writing this, I see that Russ has already given you the same advice. Use the symbolic constant value I indicated to use the ChooseFile dialog to select a single file (it can also be used to select a directory or open a file - but you want to control the opening process yourself). Note that this method allows you to set a start directory for the dialog (second parameter). The ESTK autocompletion also gives you a fifth parameter "helplink" which is undocumented and can safely be ignored.
Good luck
Jang -
Facing Parse Errors after upgrading database from 10g to 11g
Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 30 anonymous block
319e277050 57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object line object
handle number name
319e277050 67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
SureshHi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards, -
Good Morning,
We're having issues parsing several hundred PDF files located in two separate Record Center sites. All other PDF documents in the environment are being crawled and parsed without issue. I've verified the permissions for the Search service account, but that
doesn't seem to be the issue. Searching for this particular error hasn't returned much, but I have ensured that the Search service account has been added to the necessary Local Security Policy objects and cleared the configuration cache. Any help would be
greatly appreciated.
Processing this item failed because of a PDF parser error. ( Error parsing document 'https://asdf.com/sites/HRRecords/asdf.pdf'. Input string was not in a correct format.; ; SearchID = 6642FEEF-6921-434E-B084-02809173D8A7 )This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 ) -
Moving content databases from 2010 to 2013 August CU. Have 7 databases attached and ready to go, all the content is crawled successfully except zip files. Getting errors such as
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/file1.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The function encountered an unknown error.; ; SearchID = 7A541F21-1CD3-4300-A95C-7E2A67B2563C
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/file2.zip'. Document failed to be processed. It probably crashed the server.; ; SearchID = 91B5D685-1C1A-4C43-9505-DA5414E40169 )
SharePoint 2013 in a single instance out-of-the-box. Didn't install custom iFilters as 2013 supports zip. No other extensions have this issue. Range in file size from 60-90MB per zip. They contain mp3 files. I can download and unzip the file as needed.
Should I care that the index isn't being populated with these items since they contain no metadata? I am thinking I should just omit these from the crawl.This issue came back up for me as my results aren't displaying since this data is not part of the search index.
Curious if anyone knows of a way to increase the parser server memory in SharePoint 2013 search?
http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip
Processing this item failed because the parser server ran out of memory. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Votrevieprofessionnelleetvotrecarrireenregistrement.zip'. Document failed to be processed. It probably crashed the
server.; ; SearchID = 097AE4B0-9EB0-4AEC-AECE-AEFA631D4AA6 )
http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip
Processing this item failed because of a IFilter parser error. ( Error parsing document 'http://sharepoint/materials-ca/HPSActiveCDs/Travaillerauseindunequipemultignrationnelle.zip'. Error loading IFilter for extension '.zip' (Error code is 0x80CB4204). The
function encountered an unknown error.; ; SearchID = 4A0C99B1-CF44-4C8B-A6FF-E42309F97B72 )
Maybe you are looking for
-
New Workstation - System and Storage Critique Please
Hi. I'm finalizing a new workstation config and would appreciate your advice. Since I'm not a photo/video pro, this workstation will be used for multiple purposes: Video Editing (CS3 now; CS5 when released) Photo Editing (CS3 now; CS5 when released
-
When I start burning a disc i get error code 4315
Hi, When I start to burn music to a disc I receive error code 4315
-
On Illustrator CC, somehow the wheel of the mouse doesn't do the scrolling right.
When I scroll down it works, when I scroll up, it scrolls down. This happens only on Illustrator, not on Photoshop.
-
About ALV in Web dynpro for Java
hi everybody: Web dynpro for Java didn't support ALV, i don't know whether it have some UI or other like ALV if it have ,please tell me, thank you verymuch! Best Regards _
-
Report Viewer 2010 Column chart Side Margin
Hi, In Report Viewer 2010 Column chart, there is a side margin between x-axis and first column. There is only option to Enable or Disable it but i would like to have this with some small width or custom value. How can i reduce side margin in Report V