MDX Parser

hello all,
can anyone tell me what is MDX parser?
through sm59 MDX parser can be configured but i have no authorization of sm59.
i am facing this error while executing the APD.
Please suggest as i am facing this issue from long time with no solution.
Thanks,
Kumkum

hi,
can you please elaborate about MDXTEST tcode.
if i drag and drop the inobject used in the query in the right panel of MDX test editor then it shows the same error as it shows while executing the APD i.e.
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
Thanks,
Kumkum
Edited by: kumkum basu on Jun 17, 2010 11:01 AM

Similar Messages

SAP integration kit - MDX parser does not exist

Hi,
While running a query via Web Intelligence, during the process where data should be retrieved, the error pops up that RFC destination MDX PARSER does not exist.
The universe is built on an infoCube without intermediate BEx query.
I know about the existence of note 1032461, but it didnu2019t get us further:
-     Librfc32.dll (the one included during KIT installation) is at the right place.
-     MDX BW Driver was included in transports.
-      A RFC connection test via sm59 was positive.
Anybody who had same error or having tips?
All help would be highly appreciated since this should be fixed asap.
Here some additional questions:
1)     why program mdxsvr is listed in unix directory (visible via al11), and not on BO server site?
2)     The librfc32.dll file included in the installation has a lower patch number then the patch number when downloading from sap marketplace.
Is this important even when Patch Level is the same? So still necessary to change this file with version separately downloaded?
3)     Is it necessary that MDX is added to the BW internet communication framework (transaction SICF  sap  bw  bex, Mime, xml, and also MDX necessary?)
4)     Should the BW system be added to the broadcasting availability (spro)?
5)     Could this indicate a problem with the java connector?
6)     We created a RFC connection following the advice about BO-BW connection. But, is there need of an additional connection called u2018MDX Parseru2019. If yes, where do I find info how-to?
Here the full error:
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS , [0COMP_CODE].[LEVEL00].MEMBERS DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [ZCO_PA_2/ZCOPA_DAILY_AGGR] SAP VARIABLES [0P_FPER] INCLUDING [0FISCPER].[K42010001] [ZCURR1] INCLUDING [0CURRENCY].[EUR] failed to execute with the error Error occurred when starting the parser: RFC destination MDX PARSER does not exist.. (WIS 10901)

Hi,
hhmm - i can still see it and status is "released to customers"
If you have a S-User and pwd use this link:
https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132363135303726
Regards
-Seb.

MDX Parser doesn't work

Hello, everybody.
Standart TCP/IP connection named "MDX Parser" doesn't work. It says "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur".
When I try to run mdxsvr in command line it says that librfc32.dll could not be found.
And there is no such dll in the directory with mdxsvr, but there is a librfc32u.dll.
How can I solve this problem?
P.S.
My server parameters:
- IA64
- Windows 2003
- SAP NetWeaver 2004s
best regards,
Dmitry

Thanks for all of the input everyone. We too was experiencing the RFC failure on 2 new BI application servers. The good thing is we had other servers that worked fine. So we were able to copy the c:\windows\system32\librfc32.dll from one server that was working to the servers that were failing.
All of the posted helped me figure out that even though we are using 64Bit and unicode it actually need the librfc32.dll which appears to be non-unicode and of coarse 32bit.
The real trick was implementing the MS "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update"
http://www.microsoft.com/downloads/en/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en
Once I installed that MS patch I could successfully register the dll "regsvr32 c:\windows\system32\librfc32.dll"
And then the RFC now tests from all application servers.
Just to recap, our issue was the MDX Parser worked from the 2 nodes of the cluster and 2 application servers, but the 2 new servers the loads would fail if it happen to run on that server. running the RFC from that specific server would fail.
Now all is good
Thanks again

MDX Parser Error in Data Mining

Hello Colleagues,
I have created the Application Process Designer(APD) for ABC analysis. Here APD is saved and activated successfully. Now while executing, it fills the data to datatarget, but giving error "Error occurred in starting the PARSER.Error opening in RFC connection. Syntax error in MDX statement".
In help, it says go to SM59 and test the connection of MDX parser. Now there testing is failing, but What I need to do to correct the connection?
Regards

Hello,
please read the OSS note: 149809
Hope this helps
Michael

MDX Parser error

Hello,
While checking the MDX Parser connection in TR SM59, I get the following error...
Error occurred when starting the parser: Error opening an RFC connection.
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System response
Error opening an RFC connection.
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
===================================
The same TCP/IP connection (with similar properties in working in other BW system). But giving error in the system where I am trying to write some MDX statement (TR MDXTEST). It goes to debug mode as soon as MDX statement is executed in MDXTEST.
Regards
Pankaj

Your RFCDestination is not correct. Please check it in SM59.
The program specified there may not be on the app server. Have you verified this already?
cheers,

APD failure due to MDX Parser starting issue

Hello,
As part of BW on HANA migration, we have recently migrated Dev system to HANA database and during testing we have issue for one of the APD's
which when triggered failed with the below error messages: Error occurred when starting the parser:timeout during allocate / CPIC- CALL: 'ThSAPCMRCV' Syntax error in MDX statement Termination: Error when executing the query Processing was canceled And the RFC connection for MDX PARSER was also failing. Subsequently, basis implemented the SAP Note 1032461 - MDX parser does not start. Which resolved the issue with the RFC connection. However, the APD is still failing. The error message we get is as below for the same: Error occurred when starting the parser: Function RRTS_PARSE_MDX is not available Syntax error in MDX statement Termination: Error when executing the query Processing was canceled. Request your help on the same.
Most of the SDN forums on this topic advised on the SAP Note 1032461. However, despite implementing the same note our basis team couldn't succeed in resolving the issue. Thank you!

Hi Meduru Avinash,
As you rightly told, most of the time note 1032461 is referred to solve this issue.
Some where I have read that we need to refer 638701 also,
like adding gw/cpic_timeout in your system, if it is not available.
BR
Prabhith

Connection Test MDX PARSER - Error

Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!

Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM

MDX Parser RFC is not working

Hi,
I am getting the following error when I test connect the MDX Parser RFC destination.
Logon -> Cancel
Error Details -> connecton closed (no data)
I have upgraded the latest mdxsvr.exe and mdxpars.dll in the kernel directory and also got the librfc32.dll in the kernel. I got updated librfc32.dll in the registry also. I checked various SAP notes, but none helped.
The main problem was when starting MDX parser:
===============================
Error occurred when starting the parser: connection closed (no data)
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
connection closed (no data)
=================================
Pls give any inputs on this.
Thanks,
Abdul

this could be because the RFC destination host is not maintained in the hosts file on the application servers... check that you can reach the host and see if that fix your issue.
Regards
Juan

MDX parser program name

Hi
I am getting connection error in RFC Destination MDX PARSER. Error is that the program does not exit in the system. Can you please tell what does this program contain or how to find this program.
Regards
Lalit K Tyagi

Why the program name should be same as the class name
in which main is declared.
Eg:
class Test
public static void main(String args[])
System.out.println("Hello World");
program name: Test.java // Why so.In your case, since the class is not public, I figure you could name it to something else too, like Untest.java. You would need the actual class name only while executing - java Test

Error in remote call of destination MDX PARSER.

Hi friends,
creaed one req for importing appset into target system, while importing req (Operating systgem) getting error message.
Error in remote call of destination MDX PARSER.
what might be reason ?
Thanks,
Naresh

This is caused by RFC user being set as for a standard Client-Dependent Objects transports.
Add the profile S_BI-WX_RFC to user(used for import request)

Mdx parser Linux

Hi All,
Please can you tell me if I can configure mdx parser in linux plataform ? and what is the procedure ? is it similar to Win plataforms ?
thanks for your responses
Regards
Graciela

Hello,
You can find more information about your questiion in the thread below:
Problems in installing jco in unix environment
and notes:
[1032461 |https://service.sap.com/sap/support/notes/1032461]- MDX parser does not start
[413708|https://service.sap.com/sap/support/notes/413708] - RFC library that is current at this time
I hope this can help you.
BR,
Ricardo
Edited by: Ricardo Rosa on Sep 4, 2010 5:19 PM
Edited by: Ricardo Rosa on Sep 4, 2010 5:19 PM

MDX Parser: Error during allocate

Hi, I'm trying to create some WebI reports over BW Queries, but when I try to refresh the WebI document, it throws an error that more less says "timeout during allocate / CPIC-CALL: ThSAPCMRV", I know that Note 1032461 is related, but unfortunately I don't know where to find the librfc32.dll by itself on SAP Support portal, the path defined in such note is no longer valid.
I copied librfc32.dll from c:\windows\syswow64 to E:\usr\sap\<SID>\SYS\exe\uc\NTAMD64, and tried to run manually the mdxsvr with the line suggested on the note
mdxsvr -amdxparser -g <host> -x <gateway> -t
but get the error: This application has failed to start because LIBRFC32.DLL was not found
I seems to be a problem with the adequate version of librfc32.dll (version on system32 is 6405.5.318.6424, while the one on syswow64 is 7200.1.39.6461
The mdxpars.dll is version 7010.0.4300.27
I am also aware of note 1434994, where it describes a required update on the BW 7.20 SP, the current version of mdxpars.dll is 7010.0.4300.27
Any suggestions?

Hi,
I would suggest you open a case with support so that you can get the right DLL for your environment
ingo

Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngA

Hi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

MDX Query Failed to execute when universe created on MultiProvider Query

Hi All,
I am running the WebI report created on the universe which is built on Query.
The data flow model in our system for this query is:
Data Store Object> Infoset-> multiProvider--->Query.
When I drag only on Dimension object in the Webi Report without any Prompts the report works fine.
But when I add any other Dimension or any Prompt in the WebI Query it gives me following error:
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EGM09GXGU939C3RJH2G9DOQY] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_WM_IS01___F1].[LEVEL01].MEMBERS, [Z_WM_IS01___F12].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES [Z_WM_IS01___F12].[2Z_WM_IS01___F12], [Z_WM_IS01___F1].[2Z_WM_IS01___F1] ON ROWS FROM [ZWM_M02/Z_ZWM_M02_Q001] failed to execute with the error Unknown error. (WIS 10901)
But if i create the Universe on Query which is built on DSO then WebI is working fine.
Is there any restrictions on using Query on multiprovider?
Or do I have to make any configuration at BO server?
How do I configure logging for WebI and Designer to check the Log records?
Do I have to change anything related to any MDX Parser in BO Server?
We are using folowing versions:
SAP BI 7.0 and BOXIR3.1
Request to pls help me to solve this problem.

Thanks Ravi for ur inputs.
The report is working fine now.
There was the problem with the Mandatory prompts defined in SAP BI Query on which universe was developed.
U should have only those Prompts as mandatory in SAp BI Query which are Universe level prompt, if some mandatory prompts defined as Class level promts in universe then the MDX Query generated based on WEBI report will not Execute.

BW Parser Error

Hi to all
i have make a console application in MS enviroment that to retrieve data from BW enviroment bye SAP.Net Connector. When i test my console application appeare the next error message:
Parser Error timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'"
I have test this application from a machine that don't have any SAP Installation (so not there are the files librfc32.dll, mdxsvr.exe and mdxpars.dll), so how can i solve this situation?
Thanks in advance
Enrico

I am encountering this issue as well. How does the librfc32.dll register in an x64 environment.?
MDX parser fails on all SAP environments from ECC to BI7......

MDX Parser

Similar Messages

Maybe you are looking for