MDX Query not retuern any data on my production server when i check service it is running
Hi All,
MDX Query not return any data on my production server when i check service it is running. when i restart my service i can able to run MDX Query and get data in my production server.
Hi Mnishcal,
According to your description, there is no data returned before restart Analysis Services, right?
We haven't experiencing such issue before. And we cannot reproduce this issue. In your scenario, can you reproduce this issue? Here is a post which explains why you might not see the data you expect when browsing a SQL Server Analysis Services cube that
processed successfully. Please refer to the link below.
http://social.technet.microsoft.com/wiki/contents/articles/19744.ssas-troubleshooting-data-is-not-visible-when-browsing-a-cube.aspx
Besides, are there any error on the log file? The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
Query not showing any data-urgent
hi experts
i ma facing this problem: i have created an ISH (services) infocube which i have loaded with data, when i do a 'display data' on my cube i can properly see the data, when i open the query designer or analyser though, even when designing the simplest of queries ie just a service and its billed quantity and value i get a 'No Applicable Data Found' message
it is not a matter of authorization i have full priviledges and i also have 4 other cubes on which i can create reports on normally
the data in my cube is available for reporting
if anyone could suggest something it would be appreciated as i am working on a strict deadline
thanksHi ,
If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
Hope this helps,
Aparna Duvvuri -
Team calendar My trainings not showing any DATA on Production Server
Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India -
Popularity Trends not showing any data
Hi,
we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
Thanks
techieHi,
Per my understanding, Popularity Trends report showing no data in your environment.
For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
Processing” which are handling the usage report runs without issue.
More information about how to deal with this issue for your reference:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Ad Hoc Query - While executing - System could not read any data
Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
JaydeepIt was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all -
Sys_refcursor not fetching any data although query returns value
hi!!!
I am using sys_refcursor to return columns,and using below procedure to do so.Although data is there in table_1 and table_2.
PROCEDURE test_pro(abc_date N DATE,
cur_get_data OUT sys_refcursor
OPEN cur_get_data
for
select A.col1,B.col2
from table_1 A
where A.dis_date=abc_date
left outer join
table_2 B
on
A.dis_date=B.dis_date;
IF cur_get_data%rowcount=0
then
raise e_error;
END if;
EXCEPTION
when e_error
then
------no_data_found;
when others
then
--------(giving SQL error with error code);
END test_pro;
while running below sql in sql window of pl/sql developer fetching
data
select A.col1,B.col2
from table_1 A
where A.dis_date=abc_date
left outer join
table_2 B
on
A.dis_date=B.dis_date;
but while testing the test_pro in test window of pl/sql developer it is
not fetching any data and raising e_error each time
is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
so can somebody please put some ideas what cud be the possible reason for this??Welcome to the forum!
Unfortunatley you posted to the wrong forum. This question belongs in the SQL and PL/SQL forum.
PL/SQL
>
sys_refcursor not fetching any data although query returns value
but while testing the test_pro in test window of pl/sql developer it is
not fetching any data and raising e_error each time
is there any problem arising using IF cur_get_data%rowcount=0 as each time it is going to exception block..
>
A cursor doesn't fetch data - your code has to do that. The code you posted doesn't have any FETCH statements so no data will be fetched.
There is no problem using 'IF cur_get_data%rowcount=0' but it will always be 0 in your code because you are not fetching any data.
I'm guessing that you are trying to determine if there are any rows for the query. That isn't going to work since a cursor doesn't fetch rows.
You just have to return the cursor to the caller and the caller will have to perform at least one fetch to see if there are any rows.
If the above answers your question the just mark the question ANSWERED. Otherwise, since you have posted in the wrong forum
1. repost the question in the SQL and PL/SQL forum
2. Edit this post to add a link to the new thread in the other forum
3. Mark this question ANSWERED so people will follow up in the other forum.
Thanks. -
Query not executing any results
Hi,
I have created a Custom Virtual Cube with a custom function module. This Cube displays data when i check it through the transaction code - LISTCUBE.
I have a query which has to be executed on this Virtual Cube. When i execute this Query , it does not display any data at all. It always displays "No applicable data found".
I have tried with the combination of inputs for which the data is available in the cube. but still it gives "No applicable data found".
Can someone suggest me what i have to do to correct this problem.
Thanks
MaddyHi Maddy,
I also encountered similar problem in BI 7.0, which doesn't happen in BW 3.5, though I was using Basic Cube, not Virtual Cube. I could finally work it out. Here are the steps I used:
- Right click on the InfoCube > choose "Manage".
- In the "Requests" tab, click the traffic light button in the "Request Status" column, set it to "Status OK".
- The "Request for Reporting Available" column will show the "Request is available for reporting" icon automatically.
- Try to execute your query again.
Hope this might be relevant to your situation as well.
Regards,
arie -
Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
saw.odbc.statement.fetch
saw.subsystem.portal.pdf
saw.delivers.rpc.getDeviceContent
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadPool
saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUNDThanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish -
Custom reports in R12 not returning any data
I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan -
ACS Report - User_Usage_Logon - not returing any data and the report never finishes
Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
SameerHi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
<switches>
<add name="DefaultTraceSwitch" value="4" />
</switches>
</system.diagnostics>
<RStrace>
<add name="FileName" value="ReportServerService_" />
<add name="FileSizeLimitMb" value="32" />
<add name="KeepFilesForDays" value="14" />
<add name="Prefix" value="appdomain, tid, time" />
<add name="TraceListeners" value="file" />
<add name="TraceFileMode" value="unique" />
<add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
<add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
<add name="Components" value="all:4,reportrendering:4,http:4" />
</RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]. -
Dba scheduler jobs not shown any data in dataguard
Hi All,
If I query the following sql statement (select * from dba_scheduler_jobs) in primary database we can able to see the data, But I have tried the same sql statement in dataguard not retrived any data. Hence can you please help me out regarding this.
DB version: 11.2.0.3
OS version: 5. 10 solaris
Note: dba_jobs view are fine in both the databases.
Regards
RKYou should load the data into a third, background sheet that the user cannot see[Sheet3]. Then parse the [Sheet3] rows for data, copy the rows with data to [sheet1] and the rows without data to [sheet2]
Something like this for each row:
Sheets(3).Select
Range("A2").Select
Range(Selection, Selection.End(xlToRight)).Select
If Application.Worksheetfunction.CountA(Selection)> 0 Then
'copy/paste into sheet 1
else
'copy/paste into sheet2
End If regards,
Robb Salzmann -
XL Reporter not getting any data
<b>Hi</b>
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
<b>STEPS Taken</b>
XL Reporter Composer Tool bar
Generate
Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
<b>Example:</b> I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
<i><b>Urs
Sindhu</b></i>If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report. -
Product Revenue Bookings and Backlog Dashboard does not display any data
Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S -
BI Publisher Word Template The report does not contain any data fields.
I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please helpHi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks -
When I tried to Mail Merge for Data is is not exporting any data.
HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
VishwaPlease try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein
Maybe you are looking for
-
How do i switch wma files from an external hard drive to mp3 on itunes?
how do i switch wma files from an external hard drive to mp3 on itunes?
-
How to access an instance in a different .FLA?
Hi I am trying to add a LOAD EXTERNAL MOVIE CLIP behaviour to a button sitting in a .FLA called SERVICESMENU. I want to load a .swf titled MULTIMEDIA.SWF into an instance of an empty symbol called PAGE LOADER on a different .FLA called MAIN.FLA. The
-
Have purchased LR1 and am now using Beta2 and rcvd notice it's time to upgrade. I really like the LR1 manual -- oh how I wish my cameras came with the same quality manual. Has Adobe updated their manual for LR2? And will it come with the disc if I re
-
Replacement for 'Apple Notes'?
Hi all I've been using Apple's built-in 'Notes' app on Mavericks as well as my iPod Touch and I love it because it's easy and fast for me to create notes that I can look at later. However, I just bought an Android tablet and iCloud isn't available fo
-
Importing photos from iphoto into idvd
I am trying to import photos from iphoto into idvd for a slideshow. When the photos move into idvd they are not in the same order as they were in the iphoto library. What could be the possible cause of this?? I did go into iphoto and place comments i