ME 5.2 connection with two ECC systems

Hi Sergiy/Experts,
Need to connect ME 5.2 system with two ECC & SCM systems for a scenario. Is it possible to connect?
During SAPMEINT standard interface we get connection credentials point for only one ECC system.
How I can meet the scenario for ECC system?
will appreciate your help.
Thanks in advance

Hi,
Yes, it is possible. See my answer here:
http://scn.sap.com/message/14408145#14408145
There is a design limitation: plants must be unique across the different ERPs connected to the same SAPMEINT.
Regards,
Sergiy

Similar Messages

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

2 system PLM setup question - Connecting to another ECC system for master data

I have been tasked with setting up the latest version of PLM in our environment. We have a free standing PLM Server (ECC 6.0 EHP7, SP2 with PLMWUI 747, SP3) that we would like to connect to another ECC system (ECC 6.0 EHP5, SP4 with PLMWUI 701, SP4) for its master data. In trolling around google and the marketplace, there isn't any setup guide or anything that really explains what the options are. Does anyone know what the possible setup options are or even better provide links to documents that show how to set this up? Can PLM be setup in the way that we want it to be?
Thanks in advance.

Hello Steve,
Unfortunately there isn't a lot of PLM documentation available.
I'm not sure I really understand what you need, but in essence, the PLM framework was developed using the SPI technology. That is, the Service Provider Infrastructure, which is a technology to split the UI from the business logic behind it. The idea is, in the end, you can have one single DB, connected to multiple systems and different types of UIs. (you can find some more details here: http://wiki.scn.sap.com/wiki/display/SPI/Home)
As far as I know, you have to do some customization in SPRO and maintain views /PLMB/V_RFC_DEST and /PLMB/V_RFC_LSYS. Everything else is done by the PLM framework via RFC connections.
Hope this helps you...
Tudor

'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

Dear Experts
I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
ABAP Proxy purposes.
In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
Thanks for your ideas.
Mathias

Hi,
Check these replies.
R/3 connected to multiple XI instances
'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
Multiple XI Instances
Multiple XI instances or multiple app server
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

Combining two ECC systems

Hi Gurus,
There are two ECC systems for Different Regions in my company for some years. Now we plan to combine the two systems into one. then remove one system
Do you have any document/suggestions for this kind of project? Very appreciate your inputs
Regards,
Sumanth

what is your BI question?

Connect two ECC systems with one SAP CRM 7.0

Hi Gurus!
I have to do a customizing for connect two ECC 6.0 and one SAP CRM 7.0, only I need the organizational structure from both systems and they need update when the structure from CRM has changes. The business partner goes to ECCs system by PI interfaces.
Both organization models are different, so I have to maintain and update depending the changes in the business.
But I don't know if this is possible, I don't know if we can do this by Middleware, ALE or PI.
Can you please, give your oppinion about this topic?
Best regards,
Eugenia.-

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

Connecting to Multiple ECC systems via one Gateway system(Dynamic System Selection)

Hi Experts,
We have multiple ECC systems and one Gateway server. We want to connect to these different ECC systems using one GW system.
I have created System Aliases for these ECC system in GW system. For a service, i added 2 system aliases.
Now we are looking for the solution where UI can provide the system alias (it wants to connect) as a parameter while calling oData Service.
Please help.
Regards,
Rohit

Hi Rohit,
we have a similar scenario where we have two system aliases for one service. Both aliases point to the same system, but different clients; it should not make a difference though, having different systems. The feature you are looking for is Multiple Origin Composition (MOC).
There are a couple of things you have to consider:
in the SEGW the entity to be called has to be marked as addressable
the URI of the service needs to include the tag for MOC (;mo) --> http://sapgw.domain.org:8000/sap/opu/odata/sap/ZSOME_SERVICE;mo/entityset
Without the ;mo the call will be routed to your default alias. The ;mo will route the call to both systems. Using MOC will generate an additional key property into your entities --> SAP__ORIGIN. The property is the alias. If you want to route to a specific system you have to provide the SAP__ORIGIN like providing normal key properties in your requests.
This will look like this:
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
    <d:SAP__Origin>SOME_ALIAS</d:SAP__Origin>
    <d:Identifier>SOME_IDENTIFIER</d:Identifier>
    <d:Doublet />
</m:properties>
</content>
The original Entity only consists of the key property "Identifier" and the property "Doublet". "SAP__ORIGN" is added via the ;mo.
Hope it helped...
Holger

BW system connecting to multiple ECC systems

Hi,
I am new to BW world & has a question to Gurus
1. Can I connecte a single BW system to source from multiple ECC systems (activley) with out any technical issues ? I am assuming that the multiple ECC systems are pretty much mirror images.
2. If possible what are the areas ( at a high level) I need to double check to make this happen ?
Thanks
Hari

Hi Hari,
Yes, you can connect multiple ECC systems to one BI system in one of my project we had more than 20 ECC systems connected to BI Production system.
How this works is because source system and BI system has got different provisions for that,
1) For connecting different systems you simply need to create RFC connection between them. After the RFC is formed you can load data from any of the systems.
How BI system differentiate similar data coming from these systems?
There is a field called 0SOURCE SYSTEM which is used as Compounding field, or primary key field where ever you have data loading from multiple systems, this field basically contains the 3 char source system ID and is used to differentiate records coming from different source system.
How delta is managed in this scenario?
In source system for each data source, a new delta queue is maintained for each target system.
Regards,
Durgesh.

Error when connecting Portal to ECC system

I am trying to connect Portal system to our ECC system.
We are on Portal 7.00 ECC 6.0. Portal is on SP 18
I performed following activities:
1. Created certificates on both sides and imported them
2. Created the ECC system in Portal with followin values
1) Connector:
     Application Host : pos_bmt.com:8000
     SAP Client:100
     SAP System: REC
     Port: 3200
     System type: SAP_R3
   2) Web AS:
     Web AS Host Name: pos_bmt.com:8000
     Web AS Path: /sap/bc/bsp/sap
     Protocol : http
   3) ITS
     ITS Host Name: pos_bmt.com:8000
     ITS Path: /sap/bc/gui/sap/its/webgui/
     Protocol : http
   4) User management
     Authentication: SAP Logon Ticket
     Logon Method: SAPLOGONTICKET
     User Mapping Type: admin, user
3. Crearted Alias and did connection test
   1) SAP Web AS Connection was successful
   2) ITS Connection was successful
   3) Connection Test for Connectors was successfu;
After then, I created an iview, but I was promted to login with an error : u201CSSO logon not possible; cookies must be activated in the browseru201D. So I performed a test on the support desk, SAP GUI for windows was successful, but SAP GUI for html was failed with the same error message, u201CSSO logon not possible; cookies must be activated in the browseru201D]
Any feedback would be greatly appreciated.
Justin
Edited by: Juhan Kim on Jul 9, 2009 10:53 AM

Hi Justin,
SSO logon not possible; logon tickets not activated on the server
Please check your WAS Profile Parameters in RZ11:
For enabled SSO,WAS should have the possibility to create and accept SSO-Tickets. For that the Profile Parameters should be:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
Regards,

Zens - connectivity with car audio systems

Hi - got an odd, obscure question. I have an Audi fitted with the so-called 'Audi Music Interface'. As well as the ubiquitous Ipod connector, this one comes with a mini-USB port to which I have successfully connected a Zen X-fi 32GB and a 2GB Samsung YP-K3. However, when I try to connect my 4GB Zen V+ I get an 'unable to connect' message from the Audi.
The music on all three is from the same source (same file formats etc) so what can be thedifference between the two Zens that prevents one of them from being recognised by the unit's I have usedWMP to transfer the music to all threeMP3 players.
Another oddity - while I'm at it - is that the X-fi doesn't like being undocked from the car and will frequently lock up and require a reset. It will resume working without a problem if left connected iin place.
Any ideas anyone
Paul

OneMoreOne wrote:
Yeh - tried that. Trouble is, it doesn't last. I frequently have to reset the device and, every two or three days, it hangs so completely, I can only get it going again by going into Recovery mode and doing a 'clean up'. This works but not for long.
I've also noticed that the Zen doesn't appear to charge while connected th the car system. The little green battery indicator suggests that it is charging but after 48 hours in the car, the Zen won't start and has to be recharged via my computer
If that player is under warranty I would return it. If not use another method to connect to the car stereo. Unfortunately I don't know enough about the system you have to advise on that. As for the charging I have a USB port on mine & the same thing occurs as it appears to dock & charge except it does not. That I would say has to do with the player itself not that it is a defect of the player. For instance all wall chargers in particular the ones you can plug a usb cord into will not charge a Creative player. I know because I have tried with several different players I own. The fact your stereo is Ipod ready tells me that very well may be why it does not perform as you would expect since the 2 devices are very diiferent.Wish I could be of more help.

How can I create a mobile application to connect with my php system

II have few question to ask all expert here :
1. Im using Netbeans IDE, how can I compile the .java file to .jar ?
2. Currently, I have created a point of sales application using php and I hope to create a Mobile application to connect with tis system. So, anyone can let me know what I need to start ?
3. Im using postgresql database, anyone here know how to connect with mobile application?

!. When you build java application in NetBeans (standard one) you just click 'Build' or 'Clean and Build' and your jar file is waiting for you inside 'dist' directory of your project
2. Connecting MIDP application to the server running PHP scripts is not a problem, just connect using simple HTTP with GET or POST and you are done, google on it!
3. You can connect to the database using some kind of PHP/JSP/ASP or whatever application you want and then using method from point 2 to send and retrive values, you can do it with web services as well, possibilities are endless
Hope this helps!
Kris

R/3 connected to two BW systems ...

Hello,
I would like to know is it possible to connect an R/3 system to two BW systems ?
Please advise,
Dimitry Haritonov

Hi dear,
take a look to OSS Note 775568 'Two and more BW systems against one OLTP system'...
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

ME 5.2 connection with two ECC systems

Similar Messages

Maybe you are looking for