ME and Database... It is possible?

Hello,
I tried some example Apps with the micro edtion, but I found not solution to get access to a database to save data. It is possible to get access from ME?
The problem is the a customer entered some data on the PDA an it must save in a persistent way..
Thanks for help.

I found a thread that contains my answer. Thanks.. please close.

Similar Messages

  • Backup of mirrored database is not possible?

    Hi Please correct me,
    backup of mirror database is not possible right?
    Thanks
    Shashikala
    Shashikala

    Hi Shashikala,
    While a database mirroring session is active, the mirror database is in a recovering state and it is not accessible. Thus as Ashwin’s post, backup and restore of the mirror database is not allowed. In addition, you need to note the following things:
    •Backup of the principal database is allowed, but BACKUP LOG WITH NORECOVERY is not allowed.
    •Restoring the principal database is not allowed.
    For more information, you can review this article:
    Database Mirroring and Backup and Restore.
    Thanks,
    Lydia Zhang

  • Re: Workspace integration and Database Mapping

    Subject: Re: Workspace integration and Database Mapping
    >
    1. I aggree with you that this is a weak point of Forte. A possible workaround is
    to have a Workspace 'BugFixes' where you fix your bugs without affecting the rest
    of your code.
    1 - When you integrate a workspace into the repository it takes all the
    changes you have made in that workspace and 'saves' them to the
    repository. However, what if you have a workspace which has a half
    finished project as well as another project which you make a small but
    important change to. The small change must go back because other
    developers need the 'fix', but the half finished project will essentially be
    'broken' if it is integrated at this stage. Is there any way to integrate
    only specific projects? If not, how do you stop the half finished project
    being copied into the other developers' workspaces when they do an
    'Update'.
    Hi Forte'rs
    I just would like to express my deep appreciation for the way integrating
    workspaces works in Forte.
    This makes it a lot safer to work with, because you can only test the
    COMPLETE set of code and not just the 'few' changes you just made...
    I, at least, always make quite a few changes in a bunch of classes, so it would be
    a complete mess to try to sort out which changes to integrate and which to keep
    in my workspace only.
    Now I also have been frustrated not being able to make a quick (and dirty) fix - but
    in hindsight - it is clear that you cannot be sure that the fix works in the real world
    (you know: the stuff outside your own heavily modified workspace).
    So while I agree with everyone that got frustrated by not been able to integrate
    just a few changes, I am also happy that this is not allowed!
    may the forte be with you all
    Jens Chr Juul Jensen
    KAD/Denmark
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Subject: Re: Workspace integration and Database Mapping
    >
    1. I aggree with you that this is a weak point of Forte. A possible workaround is
    to have a Workspace 'BugFixes' where you fix your bugs without affecting the rest
    of your code.
    1 - When you integrate a workspace into the repository it takes all the
    changes you have made in that workspace and 'saves' them to the
    repository. However, what if you have a workspace which has a half
    finished project as well as another project which you make a small but
    important change to. The small change must go back because other
    developers need the 'fix', but the half finished project will essentially be
    'broken' if it is integrated at this stage. Is there any way to integrate
    only specific projects? If not, how do you stop the half finished project
    being copied into the other developers' workspaces when they do an
    'Update'.
    Hi Forte'rs
    I just would like to express my deep appreciation for the way integrating
    workspaces works in Forte.
    This makes it a lot safer to work with, because you can only test the
    COMPLETE set of code and not just the 'few' changes you just made...
    I, at least, always make quite a few changes in a bunch of classes, so it would be
    a complete mess to try to sort out which changes to integrate and which to keep
    in my workspace only.
    Now I also have been frustrated not being able to make a quick (and dirty) fix - but
    in hindsight - it is clear that you cannot be sure that the fix works in the real world
    (you know: the stuff outside your own heavily modified workspace).
    So while I agree with everyone that got frustrated by not been able to integrate
    just a few changes, I am also happy that this is not allowed!
    may the forte be with you all
    Jens Chr Juul Jensen
    KAD/Denmark
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Recreate SAP and database services in Windows

    Hi!
    I'm running my sandbox in a wmware enviroment and yesterday the C: partion got corrupted and I managed to "save" the other drives where the SAP and database are installed.
    Is there any way to recreate the SAP and database services in another Windows installation? (manually or automatically)
    That way I don't need to reinstall the whole system....and no there is no backup or snapshot since the system is not complete.
    But if I get the database to start I should be able to do a backup and then do a new installation and import the backup!?
    Thanks for any input
    rollo

    What is the database platform?
    If it is SQL Server try attaching the data & log files to another instance SQL instance at the same release & patch level, if that works the database is intact so recovery should be possible.
    From there rebuild your vmware box and treat the SAP install as though you are doing a 'system copy' so -
      -Install & patch Win2003
      -Install & patch SQL Server
      -Install a 'blank' SAP Central Instance & update kernel
      -Attach SQL database
      -Use the SAP's SQL Migration tools to prepare DB & instance
      -cross fingers & startsap
      -make a backup
    Check out http://servcie.sap.com/instguides for the System Copy guide that matches your release
    If that helps please reward points
    Cheers
    Danny

  • Search static pages AND database tables

    Hi,
    I'm working on a project in which I have static content
    pages, plus I'm creating a set of dynamic pages that display jobs
    and events listings etc. The dynamic pages are going to run off an
    access database.
    I'm need to create a search facility on the site. At present
    I'm planning to use a drop down box (or radio buttons ?) to allow
    the user to select which part of the site to search (main site,
    jobs or events), the selection will determine which search page the
    form query is passed to (site text search or database query search
    page).
    Am I approaching this correctly.
    Can anyone comment on possibly a better or alternative way of
    providing such a search option ? (searching both static pages and
    database tables)
    Thanks in advance.

    I guess something like <cffile action="read"
    file="C:\docs\shopping.html" variable="shoppingList">. Is there
    a way to do multiple files at once?

  • Workspace integration and Database Mapping

    Hi there folks,
    I have a couple of questions about Forte.
    1 - When you integrate a workspace into the repository it takes all the
    changes you have made in that workspace and 'saves' them to the
    repository. However, what if you have a workspace which has a half
    finished project as well as another project which you make a small but
    important change to. The small change must go back because other
    developers need the 'fix', but the half finished project will essentially be
    'broken' if it is integrated at this stage. Is there any way to integrate
    only specific projects? If not, how do you stop the half finished project
    being copied into the other developers' workspaces when they do an
    'Update'.
    2 - We have designed a class called 'Criteria' which contains several
    attributes, each of which are a class called 'Criterion'. The Criterion
    class contains the attributes "Active", "From" and "To" which are simple
    data types. Now if the 'Criteria' class is used for attributes in two other
    classes (Say "ClassA" and "ClassB"), how can you match these
    classes to RDBMS tables? I realise you could explicitly name columns
    and attributes in SQL Select, Insert and Update statements, but that
    has now defeated the purpose of creating the 'Criteria' class in the first
    place. Namely, ease of future maintenance. Am I missing something
    here?
    Thanks in advance for any help.
    Cheers,
    Duncan Kinnear,
    McCarthy and Associates, Email: [email protected]
    PO Box 764, McLean Towers, Phone: +64 6 834 3360
    Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
    Providing Integrated Software to the Meat Processing Industry for over 10 years
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Duncan,
    1. There is no way to integrate a part of your workspace/class and not the other. So, before you integrate you have to make sure that it compiles and also your changes do not break what others are doing when they update. The only way to do it is to export the half finished projects/classes, integrate the good workspace and then import it back and continue your work.
    It is important that there is some discipline and lot of unit testing as your application grows bigger and code larger and you go towards deployment. This will reduce the possibility of breaking others code (after you integrate and others update).
    2. From what I have seen, compared to lot of tools Forte goes very far in providing a good and easy mapping from objects (rather object attributes) to table column mapping. All said and done there is a mismatch between pure objects and an RDBMS table. We have to live with it until we get to a stage where we can have OODBMSes which are still in its infancy compared RDBMSes. In forte you can map attributes of an object whose names are same as the column names. Another option is to alias the column names to match the attribute names in the SQL.
    Now for my pet discussion of mapping objects to tables - It is easier and simple if you map an object to a table. OO purists might argue with me and say that is not very OOriented. That is right but we are dealing with a mismatch here. It is just that we are impedance matching by trying to persist an object into an RDBMS table.The other possibilities are to map 1 to many from object to a table and vice versa. Choose whatever is right for you. Eventually keep the performance in mind when you choose an approach.
    Hope this helps.
    Nirmal
    Nirmal P Uppalapati Phone: (203) 622-5386
    VP-US Operations (203) 359-3992
    PSI Data Systems Ltd. Mobile: (203) 912-1302
    Suite 406 Fax: (203) 359-4662
    One Bank Street Email : [email protected]
    Stamford, CT 06901 USA Web: http://www.psi.soft.net
    -----Original Message-----
    From: Duncan Kinnear [SMTP:[email protected]]
    Sent: Wednesday, October 14, 1998 6:02 PM
    To: [email protected]
    Subject: Workspace integration and Database Mapping
    Hi there folks,
    I have a couple of questions about Forte.
    1 - When you integrate a workspace into the repository it takes all the
    changes you have made in that workspace and 'saves' them to the
    repository. However, what if you have a workspace which has a half
    finished project as well as another project which you make a small but
    important change to. The small change must go back because other
    developers need the 'fix', but the half finished project will essentially be
    'broken' if it is integrated at this stage. Is there any way to integrate
    only specific projects? If not, how do you stop the half finished project
    being copied into the other developers' workspaces when they do an
    'Update'.
    2 - We have designed a class called 'Criteria' which contains several
    attributes, each of which are a class called 'Criterion'. The Criterion
    class contains the attributes "Active", "From" and "To" which are simple
    data types. Now if the 'Criteria' class is used for attributes in two other
    classes (Say "ClassA" and "ClassB"), how can you match these
    classes to RDBMS tables? I realise you could explicitly name columns
    and attributes in SQL Select, Insert and Update statements, but that
    has now defeated the purpose of creating the 'Criteria' class in the first
    place. Namely, ease of future maintenance. Am I missing something
    here?
    Thanks in advance for any help.
    Cheers,
    Duncan Kinnear,
    McCarthy and Associates, Email: [email protected]
    PO Box 764, McLean Towers, Phone: +64 6 834 3360
    Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
    Providing Integrated Software to the Meat Processing Industry for over 10 years
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Essbase and database in different server

    Hi,
    It is possible to put the ESSBASE in one server and database(oracle , SQL Server) in another server? It is possible, what are the things i want to do?
    Thanks,
    PC

    Hi,
    Assuming that you've got powerful boxes for this purpose, if you are going to use database server just as a repository database server for say, Planning, then that's fine to have essbase and rdbms on the same server. However, it's not advisable to have essbase on a server where a heavy datawarehouse is co-hosted.
    Alp

  • Create both onscreen and database storage JSP application

    Hi,
    My JSP application is a JSP form with name, address, phone number, etc. and a submit button. The output currently shows onscreen with no database connection. Can someone please tell me how I store this in the Oracle database and would it be possible to do both - show the output on screen and also store it in the database.
    TIA,
    Sassan
    Code:
    Create jsp form:
    <html>
    <head>
    <title>Create Form</title>
    </head>
    <body>
    <form action="/Create_Form_html/RetrieveFormData.jsp" method="post">
    <table align="center" cellspacing="2" cellpadding="2" border="1">
    <tr>
    <td colspan="3">
    <b>Company Name:</b>
    <%
    String company = request.getParameter("company");
    if ( company != null ) {
    %>
    <input type="text"
    name="company name"
    value="<%=company %>"
    size="40" maxlength="40">
    <%
    else {
    %>
    <input type="text"
    name="company name"
    size="40"
    maxlength="40">
    <%
    %>
    </td>
    <tr>
    <td colspan="3">
    <b>Street:</b>
    <input type="text"
    name="street"
    size="43"
    maxlength="43">
    </td>
    </tr>
    <tr>
    <td>
    <b>City:</b>
    <input type="text"
    name="city"
    size="20"
    maxlength="20">
    </td>
    <td>
    <b>State:</b>
    <input type="text"
    name="state"
    size="2"
    maxlength="2">
    </td>
    <td>
    <b>Zip:</b>
    <input type="text"
    name="zip"
    size="5"
    maxlength="5">
    </td>
    </tr>
    <tr>
    <td>
    <input type="Submit" value="Submit">
    </td>
    </tr>
    </table>
    </form>
    </body>
    </html>

    You can use JDeveloper's Data Web Beans - these are data-aware controls for JSPs.
    Start by creating a JSP from scratch using the Business Components JSP application wizard. Instructions are in the online documentation, under:
    User Guides
    ->Developing Applications
    ->Developing Web Applications
    ->Creating a JSP application
    Or you can learn how to do this by stepping through the Business Components tutorial. The tutorial is also in the online documentation, under Tutorials and Sample Applications.
    Once you're more familiar with data-aware JSPs, you can customize a data-aware JSP or create your own from scratch. Instructions for customizing JSPs are also in the online documentation, following the instructions for creating a JSP.
    Regards
    Blaise

  • View on "Transparent Table and DataBase View" ????

    Hi
    I have three transparent tables and four database views in R/3.
    Is it possible to create the view on "Transparent Table and DataBase View". Please let me know
    kumar

    no it's not possible.

  • Web and Database Security - SQL Inject info

    Web and Database Security - SQL Injection.
    Here is a whitepaper on The Dangers of Dynamic Content (SQL Injection)
    http://www.issadvisor.com/viewtopic.php?t=125
    SQL Injection. 3 parts. The first part discusses the basics of how to test
    web applications for SQL injection vulnerabilities. The second part goes into
    the specifics of how to manually identify and test for SQL injection
    vulnerabilities. And the third part describes how to exploit SQL injection to
    retrieve data from the database.
    http://www.issadvisor.com/viewtopic.php?t=123
    Understanding this critical security issue, helps web developers that leverage
    database must design and make their applications more secure.
    Hopefully these two links are informative and useful. Please pass them on.

    An APEX page can certainly be configured to not require authentication (that's pretty standard for the login/ registration page). There is no need for an "Oracle public password." There are accounts in the Oracle database that APEX uses but that no human needs to know the password for. If that's what you mean by "Oracle public password" then, yes, you do. But that would be the case no matter what authentication and authorization scheme you use in APEX.
    A static IP address for your web server is likely a good idea. It's possible to have DNS work with dynamic IP addresses but that's probably not what you want.
    Justin

  • Agent 10.2.0.5 and database 11.2.0.3

    Hello!
    Is it possible to install EM Grid cotntrol agent 10.2.0.5
    on server with oracle database 11.2.0.3 or agent should be installed first?
    Thanks and regards,
    Pavel

    Is it possible to install EM Grid cotntrol agent 10.2.0.5 on server with oracle database 11.2.0.3
    YES
    or agent should be installed first?
    NO
    Agent should be installed afterward the database.

  • Difference Between Database Schema and Database User Account ??

    First i would like to know what an Oracle Database schema exactly is ?
    And what is it for and also What is it's use ?
    Later the exact "Difference Between Database Schema and Database User Account".
    I googled about it but i'm unable to find out it's The difference,
    Please try to explain in a simple manner........
    Thank you very Much in Advance..........

    user13655582 wrote:
    Greate example. but i would like add one more point..
    a user is a schema and schema is a user. but when this applies to the user that he become a schema, only if he has got some objects. so we can say while creating the user which dosent contain any objects called simple user account but afterwords when he has got an objects then we can say its a schema as the above user has shown you through the exampleIt is just word-play. There is nothing in like a 'status' indicator to say "USER_A is just a user but USER_B has become a schema". Many people use the terms "user" and "schema" interchangeably, and some very good DBAs will insist this is correct. I don't disagree with them even though I usually try to make the distinction.
    In a typical application, all of the objects (tables, procedures, etc) that implement the app will be owned by a "application schema owner" - a user which exists for the sole purpose of owning the schema. Said user will have no privileges at all .. especially not CREATE SESSION. Except for possible maintenance activity no one ever actually connects as this user. User accounts are then given to actual humans who connect with their own accounts. The accounts have the necessary system and object privileges granted to them - via a role. One could also create a special account (let's call it APP_ADMIN) that is used for maintenance and batch operations within the application.

  • PersonalJava and databases

    Im trying connect my personaljava application to database, but when it doesnt seem to like the line below. It was tested in the PersonalJava Emulation Enviroment 3.1.
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    This results in a ClassNotFoundException...so what Drivers are available for personalJava? How does one load the database-driver
    so that accessing the database will be possible?
    //Hans

    The PJ API mentions:
    "5.22 java.sql
    java.sql is an optional package. When a PJAE implementation provides the java.sql package, it must support the full JDK 1.1.8 API of the java.sql and java.math packages."
    You could try the classes.jar from the lib directory in the jdk1.1.8 distribution. The generic java only driver you use "sun.jdbc.odbc.JdbcOdbcDriver" may work if you follow the above. N.b. Sun do not recommend this driver in a production environment due to poor performance.

  • Re: what is difference between sap locking and database locking

    hi,
        what is difference between sap locking and database locking. Iam locked the table mara by using lock objects.
    But iam unable to unlock the mara table. I give u the coding. Please check it.
    REPORT zlock .
    CALL FUNCTION 'ENQUEUE_EZTEST3'
    EXPORTING
       MODE_MARA            = 'S'
       MANDT                = SY-MANDT
       MATNR                = 'SOU-1'.
    call transaction 'MM02'.
    CALL FUNCTION 'DEQUEUE_EZTEST3'
         EXPORTING
              mode_mara = 'E'
              mandt     = sy-mandt
              matnr     = 'SOU-1'.
    IF sy-subrc = 0.
      WRITE: 'IT IS unlocked'.
    ENDIF.

    Hi Paluri
    Here is the difference between SAP locks and Database locks, i will try to find the solution to your code.
    Regards
    Ashish
    Database Locks: The database system automatically sets database locks when it receives change statements (INSERT, UPDATE, MODIFY, DELETE) from a program. Database locks are physical locks on the database entries affected by these statements. You can only set a lock for an existing database entry, since the lock mechanism uses a lock flag in the entry. These flags are automatically deleted in each database commit. This means that database locks can never be set for longer than a single database LUW; in other words, a single dialog step in an R/3 application program.
    Physical locks in the database system are therefore insufficient for the requirements of an R/3 transaction. Locks in the R/3 System must remain set for the duration of a whole SAP LUW, that is, over several dialog steps. They must also be capable of being handled by different work processes and even different application servers. Consequently, each lock must apply on all servers in that R/3 System.
    SAP Locks:
    To complement the SAP LUW concept, in which bundled database changes are made in a single database LUW, the R/3 System also contains a lock mechanism, fully independent of database locks, that allows you to set a lock that spans several dialog steps. These locks are known as SAP locks.
    The SAP lock concept is based on lock objects. Lock objects allow you to set an SAP lock for an entire application object. An application object consists of one or more entries in a database table, or entries from more than one database table that are linked using foreign key relationships.
    Before you can set an SAP lock in an ABAP program, you must first create a lock object in the ABAP Dictionary.

  • Some error in cluster alertlog but the cluster and database is normal used.

    hi.everybody
    i used RAC+ASM,RAC have two nodes and ASM have 3 group(+DATA,+CRS,+FRA),database is 11gR2,ASM used ASMlib,not raw.
    When i start cluster or auto start after reboot the OS,in the cluster alertlog have some error as follow:
    ERROR: failed to establish dependency between database rac and diskgroup resource ora.DATA.dg
    [ohasd(7964)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
    I do not know what cause these error but the cluster and database can start normal and use normal.
    I do not know whether these errors will affect the service.
    thanks everybody！

    anyon has the same question?

  • Performance with MySQL and Database connectivity toolbox

    Hi!
    I'm having quite some problems with the performance of MySQL and Database connectivity toolbox. However, I'm very happy with the ease of using database connectivity toolbox. The background is:
    I have 61 variables (ints and floats) which I would like to save in the MySQL-database. This is no problem, however, the loop time increases from 8ms to 50ms when using the database. I have concluded that it has to do with the DB Tools Insert Data.vi and I think that I have some kind of performance issue with this VI. The CPU never reach more the 15% of its maximum performance. I use a default setup and connect through ODBC.
    My questions are:
    1. I would like to save 61 variables each 8-10ms, is this impossible using this solution?
    2. Is there any way of increasing the performance of the DB Tools Insert Data.vi or use any other VI?
    3. Is there any way of adjusting the MySQL setup to achieve better performance?
    Thank you very much for your time.
    Regards,
    Mattias

    First of all, thank you very much for your time. All of you have been really good support to me.
    >> Is your database on a different computer?  Does your loop execute 61 times? 
    Database is on the same computer as the MySQL server.
    The loop saves 61 values at once to the database, in one SQL-statement.
    I have now added the front panel and block diagram for my test-VI. I have implemented the queue system and separate loops for producer and consumer. However, since the queue is building up faster then the consumer loop consumes values, the queue is building up quite fast and the disc starts working.
    The test database table that I add data to is created by a simple:
    create table test(aa int, bb char(15));
    ...I'm sure that this can be improved in some way.
    I always open and close the connection to the database "outside the loop". However, it still takes some 40-50 ms to save the data to the database table - so, unfortunatly no progress to far. I currently just want to save the data.
    Any more advise will be gratefully accepted.
    Regards,
    Mattias
    Message Edited by mattias@hv on 10-23-2007 07:50 AM
    Attachments:
    front panel 2.JPG ‏101 KB
    block diagram.JPG ‏135 KB

Maybe you are looking for