"Me Card" contents as business card

I would like to have some advice on "Me Card" usage. That collection of information should be about the user of the phone... something like owner info in S60 phones. Where should I put my phonenumber, address and that kind of stuff in this Lumia 800 phone so that I can use that as a business card.
I would very much like to be able to send someone my contact info as easily as possible via email, sms, smoke signals or any other means of communication the recipient requires.
Summa summarum. What is an easy way to send my contacts to someone else? ...and logically vice versa... how can I receive such packet of contacts to be inserted into my "phonebook"?

I would like to know how to send a business card???
I am getting fed up with my lumia, I wish I had my old phone (6700 slide)

Similar Messages

  • Business content - Customer, Business Partner or both

    Hi
    We have a task where we need to decide which business content to choose: Customer or Business Partner. Our current requirements points out that we can fulfill 90% of the requirement by utilizing the Customer information modell in SAP ECC.
    Our MDM scenario (decentralized MDM strategy) looks like this:
    Customer created in SAP ECC and then sent via SAP PI to SAP MDM. From SAP MDM the customer data is then distributed to SAP CRM and other non-SAP systems.
    Should we utilize both the business content (Customer, Business Partner) in SAP MDM as templates since the business content for Customer is based on ECC and business content for Business Partner is based on SAP CRM. If so I assume that we need to create a syndication to the Business Partner repository for each customer created in the Customer repository. Then we need to initiate a syndication to SAP CRM from the Business Partner repository. Is it better in this scenario to have Customer- and Business Partner in the same repository?
    So two questions based on the above input:
    Which Business content to use Business Partner, Customer or both?
    Should they be in separate repositories or in the same? (I understand that by keeping them in the same we create a more tight connection so that if you want to make changes in the Customer repository we need to unload the repository and thereby also influencing the Business Parter related harmonization processes).
    Br
    Göran
    Edited by: Göran Westin on Feb 11, 2011 5:19 PM

    Hello Göran,
    Customer created in SAP ECC and then sent via SAP PI to SAP MDM.
    From SAP MDM the customer data is then distributed to SAP CRM and other non-SAP systems.
    I would suggest to consider Centralized MDM strategy (Still like to know the thought behind Decentralized MDM Strategy).
    Customer should be created first in SAP MDM and then it should be syndicated to other systems.
    Benefits of having Centralized MDM strategy are...
    1. You can differentiate between potential Customers and Actual Customer by implementing Approval process.
    2. You can use MDM key strength, that is Match & Merge feature which help avoiding duplicates.
    3. You cat get most out of SAP MDM using Centralized MDM strategy.
    Which Business content to use Business Partner, Customer or both?
    Depends on your business need.
    Should they be in separate repositories or in the same?
    Having them in two independent repositories will be beneficial, because...
    1. For avoiding tight connection (as you stated)
    2. You can use SAP Business Content very well.
    3. Repositories created based on SAP Business Content will be flexible from long term perspective (Upgrade, Maintenance etc).

  • XI Content for Business Partner

    hi,
    can anyone suggest what is the XI Content for Business Partner in CRM.  i just need the exact name so that i can download it from the service marketplace.
    thanks.
    krishnan

    Hi,
    We have uploaded the XI Content for CRM Business Partner into the Repository.  We are able to find the Message Type --> ABABusiness Partner. 
    How do I proceed further.  Shall I copy this message type to my namespace and create Message Interfaces and proceed with mapping the source and target.
    In that case, how will the function module BUPA_OUTBOUND_MAIN identify the message interface created in XI.  I understand that there is some proxy code within the function module BUPA_OUTBOUND_MAIN.  How this proxy calls the message interface which I have created in XI.
    Krishnan

  • Business Content for Business Process Management (BPM)

    Hi,
    Can anyone point me in the direction for documents describing the Business Content (or SAP delivered) construction/development of BPM?
    Thanks!

    Hi Audrey,
    You can have a look at these:
    (Development of the BMP)
    Cross-Component Business Process Management (CCBPM) with XI 3.0
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap netweaver rig webinar - cross-component business process management with xi 3.0.pdf
    SAP XI 3.0 SP1 - Tutorial Defining a Business Process
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/sap xi 3.0 sp1 - tutorial defining a business process.pdf
    these below you can find at:
    http://service.sap.com/nw04
    SAP NetWeaver in Detail -
    Process Integration -
    SAP Exchange Infrastructure -
    Media Library -
    Miscellaneous
    SAP XI 3.0 - Cross-Component BPM (Virtual Classroom)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005239612003E/V00512_Volmering_221003.vcm
    SAP XI 3.0 - BPM Click-through 1 (SAP Tutor)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005237162003E/ccBPM_Lev1_MergeSplit.sim
    SAP XI 3.0 - BPM Click-Through 2 (SAP Tutor)
    https://websmp101.sap-ag.de/~sapdownload/011000358700005239282003E/ccBPM_MergeSplit.sim
    Regards,
    Michal

  • Usage of MDM's material master relevant XI Content and Business Content

    Dear all,
    In MDM's material-relevant XI content, there's a message interface "MDMMatmasIn". But in the demo system this interface is not used to write material master data to file. The IDoc type MATMAS.MATMAS05 is used instead. No mapping is used. May I ask why?
    I tried the 00_MATMAS05_R3.map file and can import file in the format of MATMAS.MATMAS05. But some value mappings are not done and have to be added manually. Do I miss precedent steps?
    In MDM Business content, there're lots of import map files like 00_MATMAS05_R3.map and 03b_Units_SAP_R3.map. During the data consolidation procedure, should we just use one map to import the IDoc-XML file? Shouldn't we first use other map file to fill the lookup tables? If not, what are those map files used for? Is there any document about the usage of those map files?
    Very sorry for asking so many questions. I'm very new in this area and desperately need help...
    Best Regards
    Jerome

    Hi Christiane,
    Thanks for the document. But I didn't find how  to import the customization data into the lookup tables. For example, in the MDM standard business content, the "Material" repository contains a lookup table "Material Type". It doesn't contain the values like "ROH" and "HAWA". How can we fill such tables?
    And the standard map "00_MATMAS05_R3" doesn't automatically add such values into lookup table by value mapping. When I tried to import a material master, I had to manually modify this map. Is there any solution to this problem?
    Best Regards
    Jerome

  • Retrieve general description/ contents in business event dates

    Hi all,
    May I know what function can I use to get general description, business event contents, notes, web link and etc in business event and business event dates? I would like to show this in my report.
    Thanks & regards,
    LOI

    Hi LOI,
    To read text fields, please use function module RH_OBJECT_DESCRIPTION_READ.
    Here give OTYPE as D if you want to retrieve data for business event type and as E for business event (with date).
    OBJID is the ID number.
    Specify the date and language at this you want the description at.
    SUBTY : 0001 - General description, 0002 - Business event contents, 0003 - Notes.
    To read web link see function module RH_READ_INFTY_1061.
    If this function does not satisfy the needs fully, please check out all other functions belonging to function group HRTEM00IWB.
    Regards,
    Dilek

  • Error in viewing role contents after Business package import

    Hi All,
    We have implemented Business Package for Course Administrator and got the role 'Training Administration' in our portal.
    When we navigate to the role, we get an error -
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:48_06/02/09_0061_53421850
    Refer to the log file for details about this exception.
    The log file has following entry for this exception ID:
    06:48_06/02/09_0062_53421850
    [EXCEPTION|https://forums.sdn.sap.com/]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in
    SAP Application Integrator occured: Unable to parse template [IF_true PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&<Authentication> &amp;&lt;DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&<ForwardParameters[QUERYSTRING|https://forums.sdn.sap.com/]>&<
    ApplicationParameter[PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&\#39;;
    the problem occured at position 310. Cannot process expression &lt;System.client&gt;
    because Invalid System Attribute: System:&amp;\#39;SAP_LocalSystem&amp;\#39;,
    Attribute: &amp;\#39;client&amp;\#39;
    Also, we are not able to preview the iView.
    I have checked related SAP Note - 890314 - EP on NW 2004s - Central Note for EP-PIN-AI and I see the entries for these errors. However the note mentions that it has been fixed in higher 04S SPs and we are anyway using NW 701 SP3, which is a higher release.          
    Could anyone give any clue on what configuration in case if we are missing?
    Regards,
    Anagha

    Hi
    For this Role, Check the iViews it Has.
    In those iViews , Check the System Property.
    Make sure the System Mentioned there points to valid Server.
    Regards
    Rajenrda

  • Tooltip widget bug? Shows up correctly in Muse preview, distorted content on business catalyst.

    This is a cross question from Adobe Muse Bugs, as it also affects business catalyst.
    I have 3 panels on my tooltip.
    3 different descriptions for each one.
    Preview mode shows up accurately on what I have designed, but when uploaded to business catalyst, only the distorted description from the first tooltip panel shows up.
    The descriptions are really just rasterised text, with a translucent rectangle behind it.
    This issue is not observed when viewing exported html file. Browser used to test is Google Chrome
    What is the problem here? The widget? Muse? Business Catalyst? Chrome? And how do I fix it?
    I'm not sure how I'd upload the html files here, but the link for the hosted site on Business Catalyst is here: Home

    Ok, I've checked the site linked here with Safari.
    It works normally, so I'm thinking it's a Chrome problem.

  • Content of Business Object ZBUS2007 disappeared partially

    Hi all!
    We have a problem with business object ZBUS2007 (Work Order). It was created as sybtype of BUS2007 and delegation BUS2007 - ZBUS2007 exists.
    During the last few months the following problem occured twice in ZBUS2007.
    In a first case, some events disappeared from ZBUS2007.
    In a second case, a piece of code of one method disappeared from the program.
    Of course, in both cases nobody deleted them. They just disappeared and we had to add them again.
    May be somebody has any idea what happened?
    May be it is because of large number of avents and attributes? There are 104 attributes added to ZBUS2007 and 260 events added.
    And one more question.
    Is there some way to check "Where used" for attributes and events?
    Thanks,
    Nina.

    Dear Nina,
    I would also say that the huge no. of events and attributes should not have an impact on the missing events and code.
    This seems more like a transport problem. As in case of workflows we have to be very sure that all the related objects are transported correctly including both customizing and workbench objects.
    It is always suggested to first transport the workbench request and then the customizing request. Then a buffer refresh should be done to sync the workflow in the new system.
    If the correct transport procedure is followed and the workflow and BO version remain consistent across landscape (D, Q and P box), then I don't see that you would face this issue again.
    Regards,
    Saumya

  • Business Content Activation of business partner

    Hi,
    I am activating standard business partner from business content.The business partner we have right now is of version 3.3/01 and has lot of custom fields. When I am activating the version 3.5/03 I want to make sure I don't lose those custom attributes and also want to know how this will impact the cubes,ODS,Infosets,Update rules,Transfer rules, queries etc associated with this InfoObject. Can anyone please help me out with this issue.
    Also while trying to simulate installation of an InfoObject,it ends up with red light. It gives me a message that one of the attributes in the latest version is a navigational attribute and the older version it was a display attribute.Hence while simulating I check both the install and match/copy box so that I can transfer the selections without having to make it navigational but end up with the red light. Is it advisable that I go ahead with installation or how should I go above it.
    Thanks,
    Kal

    Kal,
    when you activate the new version , the version is changed from M to A and the new business content would become the active state...
    But then since the old BPartner IOBJ is being used in ODS.. cubes etc , I am not sure if your Business COntent installation can proceed since there is master data as well as the same being used across BW.
    You could try a merge instead to see if he new fields as part of the new business content is carried over.
    Hope it helps.
    Arun
    Assign points if useful

  • Error in installing process chain from Business Content.

    Dear Experts,
    I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
    <b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
    Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
    Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
    Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
    Thanks in advance.
    Regards,
    NJ

    ithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
    try this
    Aravindan pagadala
    satyam

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • Importing XI Content for MDM Business or MDM Business Content 5.5 SCV to IR

    Hi All,
    I'm required to create a CRM->XI->MDM using the provided MDM 5.5 SP05 - Business Content - Business Partner in the. marketplace. From the pdf files that i have read, I understand that i would have to import SAP ABA 7.0, and MDM Business Content/XI Content MDM Business to use the interface objects, mappings and comm channel templates. I have two questions:
    1) Should I be importing the XI Content MDM Business or the MDM Business Content 5.5 SWCV to the IR?
    2) After importing the above SWCVs , all i get is an empty SWCV for Both MDM  Business Content and XI Content MDM Business with no pre-defined namespace and no object. SAP ABA 7.,0 SWCV however is working fine, with all pre-defined namespaces, and objects intact. How can i remedy the MDM Business Content/XI Content MDM Business SWCV?

    Hi Sushil,
    While i'm not 100 per cent sure of about it, i'm fairly certain that there should be ( I might be wrong). Two documents in the sap service marketplace implies this:
    In https://websmp204.sap-ag.de/installMDM under the "Installation" Header->MDM 5.5 SP05 - Business Content - Business Partner.zip, there's a pdf file in the zip folder there that states:
    "The XI content for MDM delivers interfaces, interface mappings and communication channel templates tailored to the supported SAP remote systems
    and the shipped MDM 5.5 SP05 repositories."
    Under the same "Installation" header, there's the IT Scenario Configuration.pdf file. In the pdf file, under the "Setting up XI" section they indicated that as a pre-requisite:
    "You have imported the XI content MDM Business 5.5 (XI 3.0) or MDM Business 5.5
    7.00 (XI 7.0) to the Integration Repository.
    This XI content delivers interfaces, interface mappings, and communication channel
    templates tailored to the supported SAP remote systems and the shipped MDM
    repositories. The included integration scenarios dramatically reduce the manual effort
    required to define the message flow between MDM and the supported SAP remote
    systems."
    Hence. that's why it leads me to believe that importing the SWCV into the IR "should" give me a pre-defined namespace with some objects available. Any advice on what i should do or did i misread it totally?

  • Business Content in BI7.0

    Hello BI Experts
    Could any one please tell me step by step on how to install Business Content BCS(Business Consolidation) cubes in BI 7.0. I m fairly new to BI 7.0
    Any suggestions will be reciprocated with lots of points
    Thanks

    The steps are similar to those in earlier versions of BW.
    Steps:
    1. T code RSA1  - business content - on the right side pan you will see al the available object types ; from info object to process chain to peort  etc etc.
    2. Doublec click the object type you wish to view . and now double clisk on "select objects" and you will get a pop up of the available objects. Hit the search button, if you know the name of the object that you wish ti activate.
    3. Double click the object and you will see the right pan opening and you will see the object name . Chose the type of installatin and what all you install ( the objects that you wish to activate along with).
    4. Finally, chose install.
    5. You will see at the botom of the screen the activity.
    Ravi Thothadri

  • Material master Standared Business Contents for MDM 7.1 sp 06

    Gurus,
    I am not able to find standared business contents for material repository on service market place. can some one guide me with exact steps and location I can get it from.
    I am missing some step.
    TIA
    deep

    Hi Deepak,
    Please follow the below link to get MDM Business Content, this zip folder contains every Master including Material:
    https://websmp106.sap-ag.de/support --> click on "Software Downloads" > Click on "Support Packages and Pataches" Under SAP Software Download Center>Browse our Download Catalog>Click on SAP NetWeaver and complementary products>SAP MDM >SAP NETWEAVER MDM 7.1>Entry by Component>Business Content>MDM BUSINESS CONTENT 7.1 and then finally--># OS independent (MDMBC71006_9-20004544.ZIP - MDM 7.1 SP06 Patch9 - Business Content )
    Note: For above, you need SAP User ID access to SAP Service Market Place.
    Other relevant links:
    1. [Note 1355137 - MDM Material Content Information (Release 7.1+)
    2. http://wiki.sdn.sap.com/wiki/display/SAPMDM/SAPBusinessContent#SAPBusinessContent-HowcanIusethepredefinedMDMContent%3F
    Kindly revert if you are looking for something else otherwise mark thread as answered.
    Regards,
    Mandeep Saini

Maybe you are looking for