Me edge animate project works when I test, but not when I publish. Please help.

I feel like this has happened to me in the past, but I just cannot get the thing to work when I post it online. It's just a blank page, all white. I think there might be something in the code of one of the .js files that I need to change.
?? I saw something about the phrase 'use strict' but I can't find that code anywhere.
There must be something I'm forgetting. I put all of the published files up on the server, and I just can't access it. Any help would be seriously appreciated.
Thanks.

Can you share the website link so that we can see what the issue is?
Regards,
Vivekuma

Similar Messages

Video works with one friend but not another?? please HELP!

my ichat video isn't connecting with my friend christina. we've taken turns calling each other and my computer keeps saying "no data has been received in 10 seconds" i can hear the ringing and then when we go to connect thats when the message comes up and cancels the call. at the same exact time my other friend sam was online so to test out my video chat i called her. & it worked. christina also connected with sam separately & that worked. then we tried a conference where all 3 of us could chat, and sam started it and invited both of us. it worked and we could all talk & see each other. however for some reason i can't connect to just christina. what's going on?

Hi,
Welcome to the  Discussions
iChat can have several messages on a failed chat.
The "No Data for 10 Secs" one only appears on chats that connect (even if you don't see the Video)
Basically it point to an issues between iChat at the Internet.
The same Result can be achieved by pulling the Ethernet cable out or turning the Airport card off or powering down the modem or router.
So we have to look at what can produce a similar break in the Internet connection without the drastic steps above.
Some modem and router have "protection" features that will do this.
Denial of Service (DoS) tries to make sure any data that come to your Computer does so at a rate it can handle.
It was originally designed to protect Web Servers from "attacks" where too many requests coming to frequently used to bring servers and their Internet connections to halt.
So Dos is threshold based,. It will cut any port that it thinks there is an "Attack" on.
Video chats can send lots of data.
These thresholds that are preset in the device tend to be set at Web page streaming speeds (allowing for multiple requests on popular servers) - but also at older Internet Speeds.
Modern Speeds and things like iChat Streaming two way Video can mean that certain Buddies can send you data faster than the threshold is set for particularly with iChat 5.
Stateful Packet Inspection (SPI) works differently but can only process a certain amount of data and will cut the port that is causing it to be overloaded making it Threshold based as well.
There is no way to change the thresholds involved so the best course of action is to Disable the feature.
So the Speed Sam has to send you Video may be lower than that of Christine and not bump into the threshold.
If Sam is the Host then it the Speed of that Internet Connection that governs how fast Data is sent to you.
One solution is to cap iChat in iChat > Preferences > Audio/Video Menu to 500kbps on the all Buddies involved.
If this solve the issue between you and Christine then you can move on to your Modem or router.
8:16 PM Sunday; June 6, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

I was filling a form online, then I got to where I had to upload an Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc related

I was filling a form online, then I got to where I had to upload a Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc and other related office documents?

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Firefox throws "This Connection is Untrusted" when using hostname, but not when using IP address

I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the ''src" url is http only (there is no SSL certificate) when I use IP address (https://10.10.101.156:8006/apprecovery/admin/Core/Storage) in address bar instead of hostname (https://hostname:8006/apprecovery/admin):
===
This Connection is Untrusted
You have asked Firefox to connect
securely to d37t50w1, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
d37t50w1 uses an invalid security certificate.
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
===
Why is it giving this when using hostname but not when IP address is using?

Corrected first para above:
I am remotely accessing a website which has iFrame in it. The website uses https, but iFrame tag has "src" pointing to a site using http only. However, when I remotely go to the site, iFrame shows the message below although the "src" url is http only (there is no SSL certificate) when I use hostname address (https://<hostname>:8006/apprecovery/admin) in address bar. But I dont see the message in iFrame when I instead use IP Address (https://<IP Address>:8006/apprecovery/admin) to go to main website.

Podcast - works on iTunes page but not when subscribed

Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.

It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3

A php script works in IE but not in safari .. please help

The following php works in internet explorer but not in safari or chrome .
In IE all files are saved in specified folder .
But in safari , xml portion works .. that is myxml.xml is saved in 'uploads/'.$temp directory ... but uploaded files are not saved in the given folder ..instead they are saved in 'uploads' folder .... not in 'uploads/'.$temp folder or 'uploads/'.$temp.'/image/' folder ...
The script is called from flash ...
I am new to php ... please help ...
<?php
session_start();
$temp=$_SESSION['myfolder'];
$raw_xml=file_get_contents("php://input");
if(isset($_FILES['Filedata']['name'])){
$whichfile=$_FILES['Filedata']['name'];
$whichextension=substr($whichfile,-3);
if($whichextension=='flv'||$whichextension=='pdf'||$whichextension=='txt'||$whic hextension=='mp3'){
move_uploaded_file($_FILES['Filedata']['tmp_name'],'uploads/'.$temp.'/'.basename ($whichfile));
elseif($whichextension=='jpg'||$whichextension=='png'||$whichextension=='gif'){
move_uploaded_file($_FILES['Filedata']['tmp_name'],'uploads/'.$temp.'/image/'.ba sename($whichfile));
elseif($raw_xml!=false){
$fp=fopen('uploads/'.$temp.'/myxml.xml','w');
fwrite($fp,$raw_xml);
fclose($fp);
else{
echo "&fname=$temp";
?>

Use this style rule for that image to get that custom cursor:
<pre><nowiki>cursor: url("dart.cur"), auto;</nowiki></pre>
See also:
*https://developer.mozilla.org/en/Using_URL_values_for_the_cursor_property

Buttons work in Test but not online??? HELP!

When i test my movie the buttons work fine they get the URL that i want but then when i upload it to my page it does not get the URL. Am i uploading it wrong??? I Uploaded the SWF to the Server and posted it that way is there more involved or did i do something wrong in the actual movie.
PLEASE HELP!!!!
LINK FOR THE FLA FILE:
http://www.common-grind.com/movie/BIGGIVEPARTNERS.fla

I don't know what/how you did it, but your file is exhibiting behavior that I have never seen before... it is animating and interactive in the editing mode. I cannot look at anything on the stage because it reacts to trying to use a mouse to select anything... and the camel animates in a few places. The only thing I can guess is that you are using one of the Tween graphics as the content, and those are usually generated to fill in faulty timeline tweening.
What you may need to do is back up and start with adding each button one at a time on the main timeline Don't worry about animating the camel at this stage, just get the buttons working properly. I can't tell you how to change the code for the buttons because I can't find any of the code for them.

Works fine in debug but not when published

So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
The code:
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
function slideNav(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.DOWN:
   nextFrame();
   break;
case Keyboard.UP:
   prevFrame();
   break;
case Keyboard.HOME:
   gotoAndStop(1);
   break;
case Keyboard.END:
   gotoAndStop(this.totalFrames);
   break;
When I test it using the debug (Ctrl+Shift+Enter) it works fine. When I publish it, the up and down arrows work but the Home and End keys do not work. They do nothing, no error messages, nothing.
Using Flash CS4 Pro 10.0.2. ActionScript 3. Windows 7 64-bit.
Any suggestions?
Thanks.

Nevermind. That was stupid of me. Have to disable the keyboard shortcuts or it doesn't work.

Sound works when testing, but not when uploaded

I used the Behaviors pallet to stream my mp3 files, and it
works fine when tested locally, but as soon as I upload everything
and test it online, nothing plays. The site is
www.spidersandsnakes.net/media08.htm.
Any ideas?

I suspect this is where my issue lies, but I am not sure how
to fix it. I have attached some code that defines the image
location. I am able to successfully retrieve documents with the
following, is this the same type of scenerio,
http://www.skytitleagency.com/documents/Land_Contract.doc,
except in the images folder ?

FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW

Hello All,
I have extended an extractor in the source system by adding additional fields.
One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
Has anyone experiance this issue before?
Your assistance will be much appreciated. Here is a portion of the code I wrote:
loop at I_TABLE into l_s_ZASCRM_OPPT_I.
    lv_guid = l_s_ZASCRM_OPPT_I-GUID.
    lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
    call function 'CRM_PRIDOC_READ_OW'
      exporting
      iv_header_guid = lv_guid
      importing
      ES_PRIDOC = ls_pridoc.
    loop at ls_pridoc-PRIC_COND into ls_pric_cond.
      if ls_pric_cond-kposn = lv_item_guid.
        case ls_pric_cond-STUNR.
          when '40'.
            l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
          when '55'.
            l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
          when '60'.
            l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
          when '70'.
            l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
          when '80'.
            l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
        endcase.
      endif.
    endloop.
    append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
    clear l_s_ZASCRM_OPPT_I.
endloop
Thanks,
Jeff

Hello Geo!
Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
Source system R3DEV does not exist
We mapped this.
Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
Best regards,
Peter

Form auto query works in 10g developer, but not when served by forms server

I have a form with a master and two detail blocks on the same canvas. When I run it from the developer tool on my desktop, it works great, the master block populates as expected based on the GO_BLOCK and EXECUTE_QUERY statements, and the detail blocks both populate automatically, firing their POST_QUERY triggers as well. When I run it on the server, I have to execute query manually, and then navigate to each of the detail blocks and then execute their queries manually too. When I do that, their POST_QUERY triggers are not firing.
Desktop is (Windows XP Professional version 5.1 build 2600.xpsp_sp3_gdr.100427-1636 : Service Pack 3)
Developer version is Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
Server version is OAS forms/reports install – 10.1.2.3
OS – x86-64bit (Red Hat Enterprise Linux Server release 5.4)

hello,
does oracle showing any errors in user_scheduler_job_run_details for this job ? I would advise try inserting some debug statement to identify where exactly its stuck. Also please check sample configurations syntax for user_scheduler_jobs.
Cheers
Sush

Order by date clause works in dataset test but not in actual page.

I have a page where I am trying to display the name ,date, and location of our next event by sortig the data
by date and using a where clause to exclude previous events.
I set up the recordset in DW cs4 and push test and it works fine.
Here is the mysql query :
SELECT events.NAME, events.LOCATION, events.`DATE`, events.EDATE
FROM events
WHERE events.EDATE > now()
ORDER BY events.EDATE
date field is just string data
edate is actual date I want to sort on
I have tried using edate=> currdate() and that returns the same incorrect results.
I am using Dreamweaver CS4 and mysql 5.1.
When I use my web host utility for mysql 5.1 the same query works there also.
It also works inside my localhose mysql 5.1
The only place it doesn't work is in the page.
link to page
http://www.taasports.org/test.php
I temporarily have the full dataset on the lower part of the page and it is not ordered.
Please let me know if I need to add more info etc. I am really stuck with this.
Thanks in advance
Keith
[email protected]

Thank you very much Bregent. That fixed it. I was
not looking at the code and it appears dreamweaver was adding a new statement everytime I change the s
ql statement. I deleted all of them except the correct one and now it works.
Thanks again
Keith

Any idea why .swf works in "simulate download" but not when Published?

Hi,
I have a project where I have a main project which loads external .swfs, and those external .swfs in turn load more external .swfs. In my main project, everything works perfectly when I preview using simulate download, but once the .swf is published it doesn't work properly. I'm assuming is has something to do with my main site Preloader, that's why I posted here. I'm pasting the code here and attaching the latest size report. Any ideas or help is appreciated!
extLoader_mc._visible = false;
var yChange = 109.2;
var yStart = 330.2;
myInterval = setInterval(preload,100);
function preload() {
var current = _root.getBytesLoaded();
var total = _root.getBytesTotal();
var pctLoaded = Math.round(current/total*100);
mask_mc._y = yStart - yChange/100*pctLoaded;
if (current >= total) {
clearInterval(myInterval);
_root.gotoAndStop("Main_1");

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

Me edge animate project works when I test, but not when I publish. Please help.

Similar Messages

Maybe you are looking for