Me21n disable input at item level for a/c assn

HI expoerts,
I want to disable screen input for field account assignment at item level.
anyone know about any exit or badi.
thanks

Hi,
SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document Level.
Then chosse me21n and click details.
select Basic Data, Item then click choose (tick) button. there you can set the desired screen layout for me21n

Similar Messages

Disable a field at Item level for SC confirmation Screen

Dear All ,
PLEase help me with a step by step instruction on how to disable field at Item level of confirmation screen of SC .
I tried in Webdynpro component : Web Dynpro Component:/SAPSRM/WDC_DODC_CONF_IBD in se80 and below is what I get ;
When I click on Display it asks me for an access key which I dont have ..
When I click on the enhancement option it asked me to create an implemenation which I did as seen in yellow below and still the enabled field is not getting editable so tha I can uncheck and make the field dissapper .
Please can some one really help me in understanding what exactly I am doing wrong ?
Also Please let me know if the SPRO path related in this to be able to do in any which way ... I tried expanding
Configure field control .. and it doesnt expand so dont know which other option to use ..
Thanks for your help in advance .
Kindly let me know !!
Regards
Vinita

HI Laurent .
1. Thanks for your input . I wasnt able to open the SPRO path coz I was using SAP 720 and when I installed 730 I was able to use it .
2. I am still not able to udnerstand how to configure it through Meta data .. What does Final_Entry mean .. I want to disable the field Last del indicator and its flag box and the label as well ..
3. I tried through component configuration and it worked ..as below :
I went to the webdynpro component and started the component configiurator :
Here I made both the field and Label insisible and was able to do this .
Please can some one help ,me know how to configire this through Meta data concept as well .. I wanted to try that method as well for my understanding ..
Would appreciate your help and would be closing this post soon ..

Report on delivery data in item level for list of po

Dear all
How to take Report on delivery data in item level for list of po
regards
M.Chandra mohan

You can check any of the standard reports like ME2M with the selection variant as "PO where GR exists"

User exit at item level for billing block field default for VA41 or VA42

Hi All,
I want user exit at item level for contract (VA41or VA42) for the field Billing Block in the Billing document tab
which has to populate with some default value.
Which user exit i need to check.
Regards
Jai

Hi,
Use subroutine USEREXIT_FIELD_MODIFICATION in Include MV45AFZZ.
Make sure this is for only tcodes VA41 and VA42 because this wil trigger for sales order also.
Regards,
Ashok.

Fields in sales order item level for pricing

01.02.2011
Hi friends,
I have a requirement wherein i need at least 3 additional fields at the item level in the Sales Order for pricing determination i.e i want this field to be used in the condition table. Since these fields should have list of values also, I find the fields Material group1, material group2 and material group3 ideal ones. I wont be using this field in the material master but inputting some data in these fields through development at the sales order level. How can i get these fields in the catalog? Please suggest.
Regards,
Uday

The following communication structures are relevant in pricing:
KOMK (pricing communication header)
KOMP (pricing communication item)
KOMG (allowed fields for condition structures)
For technical reasons, communication structure KOMG is used. It combines the fields from KOMK and KOMP that are relevant for pricing in the standard system and are offered in the field catalog of condition tables. If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
header data in INCLUDE KOMKAZ in KOMK
item data in INCLUDE KOMPAZ in KOMP
When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields)
The routines for assigning values to the new fields in billing are found in member RV60AFZZ. Use the following user exits:
USEREXIT_PRICING_PREPARE_TKOMK (header fields)
USEREXIT_PRICING_PREPARE_TKOMP (item fields)
Examples for using new fields in pricing
Example 1
In the first example, parts of a document field are to be used in pricing. You want to use the first three digits of the product hierarchy (PRODH) for pricing, for example. Proceed as follows:
1. Check the data elements in the standard system.
2. Since there is no such data element you have to create the new data element ZZPRODH1. Also create a domain with the length "3" and the data type "CHAR" for the new data element.
Remember that new data fields must start with the letters "ZZ" or "YY", since SAP reserved these letters to protect them from being overwritten during a release upgrade.
3. Check whether the product hierarchy (PRODH) is found at header or at item level.
In table VBAP, document field PRODH is defined as an item field.
4. Integrate the field name ZZPRODH in the communication structure KOMP using the INCLUDE KOMPAZ and allocate the data element PRODH to it.
5. Activate the structure.
6. Check in which table the field PRODH exists.
The field is in table VBAP (sales document: item data).
7. Assign a value to the new field in the FORM routines for sales order processing and billing using the appropriate user exits:
In sales order processing the user exit is found in member MV45AFZZ. The complete statement is:
FORM USEREXIT_PRICING_PREPARE_TKOMP.
MOVE VBAP-PRODH(3) TO TKOMP-ZZPRODH.
ENDFORM.
The routines for assigning a value to the new fields in billing are found in member RV60AFZZ. The statement is as follows:
FORM USEREXIT_PRICING_PREPARE_TKOMK
MOVE XVBRP-PRODH(3) TO TKOMP-ZZPRODH.
ENDFORM.

PO Delevary address not coming at item level for a New config Plant WO S Lo

Hi Gurus,
I have configured a new plant and address is maintained for this new plant. for a newly configured company code Plant and company codes are properly assigned. Now I am using present P. Org and assigned this to plant too. I am using this plant for basically non stock type of materials and no storage locations are maintained for this plant. Now I have created a New vendor for this P org and tryng to create a PO. But at the time of creation of PO I am getting as Error "Maintain Address". When I checked, I found that at item level, under delivery tab, Address number which was suppose to be for this plant( since no storage location is maintained for this) should come automatically, which is why I am getting an error. Can some one please explain if I missed something?
Thanks in Advance.
Regards
Nilesh

Hai Nilesh,
Please check T CODE: MEAN
Purchase order address required as per location
Delivery Address Number in Purchase order
Regards,
Mani

Change Partners at item level for a LUMF

Hi
does anyone know how i can change the item partner address on a material that has an item cat grp of LUMF, i can chage the sub items but not this one?
Regards
Steve

Hi Steve,
The item category (for example TANN) must be marked as "business data" in customizing, to allow different partners at item level (and also different VBKD business data at item level).
Therefore please check the customizing of the item category determined by the LUMF item category group.
Best Regards,
Franck Lumpe
Freelance SAP Logistics Consultant

Po number at Item level for Invoice

Hi,
My Invoice has 2 Line Items. Each coming from different Sales Order as a result of Collective Delivery.
I want to Print Purchase order number at the Item level from respective Sales Orders.
How can I trace it back, which tables would be useful?
Regards
Trupti Deulkar

Thanks for All the Replies.
I used table VBFA which gave me preceding documents, where I got Sales Orders ( Doc CAtegory C)
Further from VBAK retrieved the PO numbers BSTNK
This issue has been resolved.
Regards
Trupti Deulkar

Correspondence at line item level for Residual customer document

HI All,
I want to store corresponence letter for residual documents. The document containts some 20 line items and i want to store different correspondence letters for each & every line item.But system stores at header level and not in line item level.
I am able to do, when i ran F.61 for each & every line items. Whether its possible to type correspondence for all line items at a single shot and possible to run F.61.
Thanks
Hari

Hi Liz,
I´ve got the similar problem like you wrote.
My client had a reorg project behind and locked the old profit centers. For the reason of clearing open items and FX valuation those locked profit centers need either to be re-locked or the posting need to be posted to the new profit centers by using substition. Could you please kindly advicehow did you solved this problem?
OR maybe someone else can help?
Many thanks in advance.

Two different Incompletion log in item level for one sales document type

Hi All,
we are using one sales document type for 5 different sales org, now we are implemented new sales org.
pervious all 5 sales org we have setup incompletion log at item level 5 fileds.now for new sales org we need to setup out 5 fields we need to setup 3 field.
how to maintain same sales document type 2 different incompletion log.
i have checked in forum i found out below link.but is not matching for my requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=1433420
Thanks,
Kumar

Hi ,
Thanks for your responds.
i will check with my ABAP person if any thing is required i will come back to you.
Thanks,
kumar

How to maintain Userstatus in item level for Quotation ?

Hi,
I am working on CRM 7.0 Lean order Quotation..
I have field called ;Status' in item level. But it is system status.
I need to add 'User status' assignment block.
For header level there is field called' userstatus' but for item the standard field is not there.
So I need to create a Z field with DDLB and need to maintain values from VA23 (ECC syatem) are existing for the field Userstatus..
I can do by using AET, the problem is If I select an option from DDLB, corresponding checkbox in userstatus in ECC system need to be checked.
Can u Please provide anyy'LORD' interface or any solution..
Regards,
Raju

Hi,
You can save text using FM 'SAVE_TEXT' provided you know the ID and OBJECT.
For Sales Order Header text usually the OBJECT is 'VBBK' and the NUMBER is '<SO Number>'.
For Sales Order Item text usually the OBJECT is 'VBBP' and the NUMBER is '<SO Number><Item Number>'.
You will have to find out the ID of the Text from its attributes.
Thanks

Validation at line item level for F-32 to input Reason code

Hi Gurus,
I would like to write a validation / substitution for F-32 transaction code where in the Reason code field need to be mandatory field (With out input in to this field value the user should not come out of the transaction)
Please guide me how to write validation with out user exit
Thanks

Hi Suresh,
I guess the idea of MEENAKSH is good, perhaps you have an error in the Tcode, because in table BKPF the Tcode stored is FB1D and not F-32 :
So put the following in GGB0 and check again :
Prerequisite :
BKPF-TCODE = FB1D
Check :
BSEG-RSTGR <> ' '
Message :
Error : Reason code required
in the other hand, you can active a trace in GGB0 (Menu > Extras > Activate trace) to see what's the exactly the error
So it's not a question of screen.
Regards.

How to disable AutoCommit at DataSource level for 9.2

Hi,
I am trying to persist my JMS messages into timesten datastore for which connection received from timesten needs to be with AutoCommit disabled.
Any idea how to do it in Weblogic 9.2 admin console/JDBC data source level?
Thanks,
Alan

Alan D wrote:
Hi Joe,
I am trying to persist jms messages into timesten datastore. This data store is configured for two safe replication which does not allow any operations with autocommit=true. Hence connection which is obtained by this datastore has to be set to autocommit=false before any sql commands.
I have created persistent store as JDBC store which is mapped to JMS Server. I have tried to use JDBC datasource which supports global transactions as well as datasource which do not support global transaction for this persistent storage. But problem of autocommit still remains.
Thanks,
AlanThe restriction that a connection can never operate in autoCommit(true)
mode is very unusual and against the JDBC spec. You should turn on
JDBC logging and get us a full stack trace of the driver exception,
to see where it is being used in the autoCommit(true) mode. By spec
a driver will deliver a connection in autoCommit(true) mode.
Joe

Me21n screen exit in item level

Dear Experts I have a reqment to add a column of date in the table contol pf the po item.
I have used the exit mm06e005 but it is not reflecting in the tem level.A new tab is created named customer data and the date fiels is ahowing in the header data.Can any one give me a step by step procuder of the above scenario??

Hey Sayandeep,
In the Flow Logic Process Before Output (PBO) create one module or in Module status_0101 write this code.
V - Change
A - Display
H - Create
if i_trtyp = 'A'.
    loop at screen.
      if screen-name = 'Screen Field Name'.
        screen-input = 0.
        modify screen.
      endif.
    endloop.
else.
    loop at screen.
      if screen-name = 'Screen Field Name'.
        screen-input = 1.
        modify screen.
      endif.
    endloop.
endif.
Note: Try to avoid hot coding the transaction Code.
Regards,
Saravanan M

User-Exit in VA41/VA42 at ITEM level for output determination?

Hello Experts,
Am looking for user-exit/BADI/Enhancement Spot, my requireemnt is I need to populate the output (VA41/VA42 Tx>Menu>Extras>Output>ItemEdit goes to next screen, here we hv a column with lable of Output) output with my_z_output as soon as user inputs a line item and press ENTER (if its ONLY 1 item user may press SAVE button), pls. let me know whiich is the good spot for my req. in VA41/VA42
Thank you

Thank you. But, functional analyst is saying its 'not' or may be some other reason!
Pls. let me know wht is the good user-exit in VA41/VA42 to populate a value into a custom field (inserted via APPEND STRUCTURE) of a standard SAP communication structure? This is for output determination
Thak you

Me21n disable input at item level for a/c assn

Similar Messages

Maybe you are looking for