ME21N - Doc.Overview On/Off

Hi All,
ME21N :Document.Overview On/Off ->Selection Variant - CHANGES
1.Go to ME21N transaction
2.Click Document Overview On
3.Now a hierarchial ALV will be displayed
4.In that selection variant select options - Purchase Orders/PR/Contracts etc.. like this we have 10 options :
        How to add the new option(11th option)with some selecting fields....
5.Now a screen of purchasing documents will be displayed after selecting Purchase Orders :
       Here How to perform the changes to this screen like removing    F4 functionality for few fields based on some conditions...
     here, status of the program name it was showing was some query AQZZ/SAPQUERY/MEMEPO========== with screen 1000 which was getting dynamically generated.
As per my knowledge
/SAPQUERY/ME is User Group (T.Code: SQ03)
MEPO is Query name (T.Code: SQ01)
So I have created new usergroup like this for ADDING NEW SELECTION VARIENT..
Here Am not getting how/where to link this Query/usergroup/Infoset to my ME21N program
-How to change the fields of the existing select variant options../??
Kindly help me & Thanks in advance..!!
Best Regards,
KALAM.A
Subject changed...
Edited by: KALAM A on Oct 12, 2009 4:03 AM
Edited by: KALAM A on Oct 12, 2009 4:06 AM
Edited by: KALAM A on Oct 12, 2009 4:07 AM
Edited by: KALAM A on Oct 12, 2009 3:23 PM

Hi All..
Finally I found the solution for my above question.....after doing lot of R&D...
We can add our own Selection variants...
from the Function Group: MEQUERY Include LMEQUERYCI1.
& Also using the
Using the Exit : EXIT_SAPLMEQUERY_002 / INCLUDE ZXM02U11.
Thanks,
KALAM.A

Similar Messages

Add customized fields in ME21N item overview.

Hi experts,
Can we insert our own customized fields into ME21N item overview section.
Pls advise.
Thanks and regards,
Simonksh.

hi,
Yes, you can do it with the help of ABAP consultant...
Pls check whether you are providing all links to the tables for that customised field...For this all coding is required to be done...
Also check:
MM06E005 - Customer fields in purchasing documents
Its an intensive work...
Hope it helps..
Regards
Priyanka.P

Ecatt: ME21N (document overview)

Hello ecatt experts,
I have one question concerning the recording of ME21N with ecatt (sapgui).
When creating a PO with ME21N I want to link it to a purchase requisition.
To choose a puchase requisistion I use the document overview.
The problem which I am facing is, that ecatt doesn't replay the selection of a PR in the document overview.
Does someone has a solution to this issue ?
Is sapgui recording correct (or do I maybe have to use web dynpro recording ) ?

>
srinivas wrote:
> In ME21N T-code, while Creating Purchase order. I want DOCUMENT OVERVIEW always ON.
>
> Sometimes when other users work with the T-code, it gets off and script is failing .
>
> Is it possible to make the scripting independent of the changes. OR How can I keep DOCUMENT OVERVIEW always ON by the scripting.
>
> Please do the needful.
>
> Regards
> Srinivas,K
Hi Srinivas,
You can handle this case in two ways.
Please record in such a way that the document overview is on.Make this screen as optional.You can do in SAPGUI recording more effectively.
There are some tables where the user-settings get saved after single time execution of these t-codes.You have to place a piece of code that clear those settings within ABAP---ENDABAP commands in the eCATT editor before script execution commands.This will clear the settings and it shows the same way on how you recorded.
ABAP
Code to clear settings.
ENDABAP.
sapgui (script commands)
Please let me know if you have any queries.
Regards,
SSN.

Help with ME21N Document Overview Layout

There are two sets of people who use ME21N to create Purchase Orders. I've created 2 layouts for them to be used with the document overview on. I know I can set one layout as a system default. Is there anyway I can have the layout assigned or defaulted per User?
Thanks.

Try using the transaction code OMET.
Create new Function auth (say PO) there in which select FieldSel. in General Parameters tab. As mentioned that you had created two layouts, select this layout from dropdown using F4 on field FieldSel. then save the transaction.
Now assign this newly created Function auth (PO) to the specific users using SU01/SU3 in parameter tab in parameter as EFB with value as PO (as defined).
Hope this will help you.
Enjoy,
Parag Mahajan

Losing app docs when turning off docs & data iCloud backup switch.

Will I lose the documents in my I annotate app if I turn off the docs & data switch in my iPad? I don't know if there is a difference between docs saved directly to the iPad vs saved through an app like I annotate witch is saved to the iPad or cloud. I CANNOT afford to lose these docs & data. However, I must back this up.

New question, I'm trying to do a software update, the iOS 7.1.2. I keep getting an error. What do I need to do? FYI, I cleared out my iCloud backup & I have 4.8 G of my 5 G iCloud storage. Don't know if that matters. Please help, thank you.
Jeremy
Sent from my iPhone

If I delete docs from iCloud off of iPhone 4s, will it delete it from the iCloud in general? aka will I still be able to pull up from my MAC?

If I delete specific documents and data from my phone, using my phone b/c its staying icloud storage is full & my phone is freezing up....will it actually delete the docs from icloud so that when I use my MAC, they will be gone as well? Not sure if it is deleting from phone or iCloud for computer too.
Also, I don't want documents on my phone - when I save them from computer to iCloud, it seems to go there anyway & take up storage I need to run phone.
argh
thanks for help, I am horrible with technology so excuse my basic questions

What I mean is still track my stolen one. I don't know if this will make sense to you but I'm thinking that if I restore the back up data on this phone..on my stolen phone it will like forget the icloud account or something and think this phone is the stolen one so when I go to track the stolen one, it will show that phone as the one I have now because I restored the back up from that phone.

Rfq document once used as reference for po should not come in doc overview

Sir,
i want to create po with reference to rfq. the issue is that my client daily creates30 po'swith reference to rfq. so once the rfq is adopted in po that rfq should not be seen in document overview. ONLY RFQ WHICH ARE NOT ADOPTED AS PO SHOULD BE SEEN IN PO DOCUMENT OVERVIEW.
PLEASE HELP ME OUT SETTING THE PARAMATERS SO THAT USERS CAN ONLY SEE THOSE RFQ'S WHICH ARE TO BE CONVERTED INTO PO'S
IT IS VERY URGENT
THANKS
Regards

Hi,
This can be done via user exit.
EXIT_SAPLMEQUERY_001
EXIT_SAPLMEQUERY_002

ME21N - Document overview

Hello
I wonder if you can help me please. I do the buying for company 424 and 421 u2013 I have raised a PO and Iu2019m trying to find it under document overview u2013 My Purchase Orders but no luck. Please can you assist because I need to adopt lots of POu2019s. and it is very important to find all the POs created under my user ID (My purchase orders).
I have created over 8,000 purchase orders in the system ... the system might not display all the po? there is any quantity limits?
Thanks

Hi ,
Check the table entries for EKKO.
Go to se16n and give the table name EKKO.
In the field EKKO-ERNAM give your user id.
Increase the hits value to 99999.
You will get the PO numbers.
If entry are not there that means POs are not created.
Hope this will help you.
Regards
Ankur

ME21N Document overview layout

HI
I have created a document overview layout and saved with name e.g. "\TEAM A" and not selected user specific flag.
issue is only some people are able to view and use this layout and other are not able to see in their layout drop down list
please suggest what restrict / non-restrict this view?
sreeram

Hi,
Check if the default layout is made user specific for those users
Thanks
Diwakar

Purchase order ME21N screen layout-document overview

One of my users has an issue with the screen layout for transaction ME21N, when they click document overview on, everything works ok, when it gets switched off, the screen cannot be maximised, i have attached a screen print
what could have caused this issue and how do we resolve it
Thanks

responsible for the width are following entries in table ESDUS
MEPO     SAPLMEGUI/0000      Tree-On     X
MEPO     SAPLMEGUI/0000      Tree-Width     462
MEPO     Tree-Control        Tree-On     X
MEPO     Tree-Control        Tree-Width     462
Change yours to a value like shown above or remove those lines at all.
(there is no regular maintenance transaction for this table)
OSS Note 197012 - ME21N: Document overview - standard variant saved for PReq
has a report ZDELEDUS attached which can be used to delete all entries of a certain user from that table

MM - me21n Selection variant in document overview

Hello,
I would like to ask you whether it is possible to set up the Document overview in me21n as follows:
"Open Purchase Requisitions" to be shown immediately in overview, once me21n screen opened. So there will not be any need for using the selection variant manually and choose the purchase requisitions manually.
Thank you
Katarina

hi
go to me21n
now on the doc overview
now in that click on change layout
here from right column shift PR and processing status to left then save layout
now u will see pr with the processing status
now to make it default go to MANAGE layout (below save layout )
here make ur layout as default and save
regards
KI

Open / initialise ME21n with customized default Document Overview

Hi all,
I created a customer field in the Purchase Requisitions. Now I would like to create a program to start ME21n with the Document Overview on and a customized SAP Query from the infoset '/SAPQUERY/MEBANF' to implement in enhancement 'MEQUERY1'. In this Query I would like to find the Purchase Requisitions with a value which corresponds with the value of the customer field.
My obstacles are the following:
1) How can I pass a value through to the customized SAP Query
2) How can I customize the default setting of the Document Overview
Please don't post a list of other (i think irrelevant) User-exits. I'm aware of the fact that I shouldn't BDC ME21n.
Thank you in advance.
Regards,
Sander

Hi Ram,
Can you please share your thoughts on the document overview functionality in the purchase order screen, becuase I have a requirement to see the MPN number in that Doc overview for the selected Purchase requisitions. I have changed the layout and added the field MPN number but somehow this field is showing completely blank.
Regards
Shane

Document overview in ME21N

Hi,
Scenerio is : We use MD06 to display the list the requirements & from that tcode we convert the open PR into PO (ME21N).
The requirement here is - In ME21N Document overview tab we need to get both
Open PR List &
(ii) PO's on hold List at the same time (Simultaneously).
Where we need to do this setting to fulfill this requirement.
Regards,
Baskar.N

Hi,
It is not possible in standard SAP.
You can either get the PRs or the POs on hold list.
You can open two sessions at the same time , one for PR list and other for PO on hold list and specify the section criteria.
Cheers,
Satish Purandare

Part appearing to be ordered in me21n

Hi Gurus,
can anybody plz help me with this?
Part number xxxx keeps showing up for me to order thru MRP but there is
no opens sales order that I can find. This is a third party shipment.
Can you please explain to me why this keeps appearing on my Create
Purchase order doc overview area in the ME21N transaction
thanks
Anusha

The account assignment itself will not handle the closure of a requirement.
Do you see a requisition number as reference in the PO?
If you dont have a PR number in the PO, then this must have been removed manually is causing the appearance.
if the PR was only partially converted into a PO, then the PR will as well show up as open

PO Document Overview

Hi
On my PO screen some how I lost the the change breakdown icon inside the document over view. Can some body guide me how to retrieve the same?

Click Personal Settings in ME21N screen
and in the Basic Settings tab put tick for Compile doc. overview automatically..

ME21N - Doc.Overview On/Off

Similar Messages

Maybe you are looking for