ME21N,Future Date PO and Tx.Code Error FF718 Tax Code ..does not exist...

Hi
We'r creating a PO with me21n and geting the message FF718 - Tax code does not exists for the jurisdiction code"
The problem is that the PO is a future dated, i.e. document date, delivery date and also a tax code eff. date s in the future (e.g. the current system date is Mar 24, the PO and the Tax Code dates are May 01, 2010.
We assume the system should allow entering POs which are using the Tax Code effective in the future under condition that the document date is after the effective date of the Tax Code.
abap debugging revealed a possible problem in the MM06EF0E_EKPO_TXJCD, MM06EF0E_EKPO-MWSKZ in the function call (, CALL Function "CALCULATE_TAX_FROM_GROSSAMOUNT" in our case).
Neither the delivery not PO dates are not passed to this function (the parameter I_PRSDT). If the date is not passed the function is using sy-datlo (system date) as the date to check the Tax and Tax Jurisdition codes.
The questions:
1) Is my assumption that using future dated tax code is not programmed in the ME21N ?
2) if I am right whether this problem was addressed by sap, i.e. is there a note to fix this and to allow using future dated tax codes.
tnx,
Victor

Hi sap mates,
any suggestions ..i do get the same problem..
need ur help badly ...

Similar Messages

  • Error installation - Payload path does not exist and no media record specified.

    Hi all,
    When I tried to install the photosohop CS5, the below errors keep prompting out. Can anyone help me solve these errors! Thanks!
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 70 error(s), 58 warning(s)
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    ERROR: DS011: Payload path does not exist and no media record specified.
    WARNING: DW024: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
                    Family: Photoshop
                    ProductName: Adobe Photoshop CS5 Core_x64
                    This parent relationship is not satisfied, because this payload is not present in this session.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 Dolby WRAPPER X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 PCI WRAPPER X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Player for Embedding x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: Shared Technology
                    ProductName: Photoshop Camera Raw (64 bit)
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeCMaps x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe Linguistics CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobePDFL x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: AdobeTypeSupport x64 CS5
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    ERROR: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                    Family: CoreTech
                    ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    WARNING: DW025: The payload with AdobeCode:  {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ERROR: DW025: The payload with AdobeCode:  {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
                    Family: InDesign
                    ProductName: Adobe InDesign CS5 Icon Handler x64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this dependency from list. Product may function improperly.
    WARNING: DW025: The payload with AdobeCode:  {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
                    Family: Adobe Web Suite CS5
                    ProductName: Adobe Media Encoder CS5 X64
                    MinVersion: 0.0.0.0
                    This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                    Removing this payload from the dependency list.
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR: DW050:  - Adobe Media Player: Install failed
    ERROR: DW050:  - SiteCatalyst NetAverages: Install failed
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Support: Install failed
    ERROR: DW050:  - Adobe Bridge CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR: DW050:  - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
    ERROR: DW050:  - Creative Suite 5 Master Collection: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5: Install failed
    ERROR: DW050:  - Adobe Player for Embedding: Install failed
    ERROR: DW050:  - Photoshop Camera Raw: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK: Install failed
    ERROR: DW050:  - AdobeHelp: Install failed
    ERROR: DW050:  - Camera Profiles Installer: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS5: Install failed
    ERROR: DW050:  - AdobeColorJA CS5: Install failed
    ERROR: DW050:  - Adobe ReviewPanel CS5: Install failed
    ERROR: DW050:  - Adobe BrowserLab CS Live: Install failed
    ERROR: DW050:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR: DW050:  - CSXS Story Extension: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS5: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - DeviceCentral: Failed due to Language Pack installation failure
    ERROR: DW050:  - AdobeTypeSupport CS5: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS5: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5: Install failed
    ERROR: DW050:  - AdobeOutputModule: Install failed
    ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - AdobeColorEU CS5: Install failed
    ERROR: DW050:  - AdobePDFL CS5: Install failed
    ERROR: DW050:  - HIL Help Search: Install failed
    ERROR: DW050:  - AdobeCMaps CS5: Install failed
    ERROR: DW050:  - AdobeColorNA CS5: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Adobe Illustrator CS5_AdobeIllustrator15en_GBLanguagePack: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS5: Install failed
    ERROR: DW050:  - AdobeJRE: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR: DW050:  - Adobe AIR: Install failed

    Hi,
    I have followed the instructions and download the products, but there is still error.
    I have downloaded the one that is circled in red. is that compatible with my com?
    And these are the errors:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 45 error(s), 41 warning(s)
    WARNING: DW024: The payload: Adobe Photoshop CS5 Core  {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
              Family: Photoshop
              ProductName: Adobe Photoshop CS5 Core_x64
              This parent relationship is not satisfied, because this payload is not present in this session.
    ----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
    MSI Error message:
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding 3.1.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ----------- Payload: {15FEDA5F-141C-4127-8D7E-B962D1742728} Adobe Photoshop CS5 12.0.0.0 -----------
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe CSXS Infrastructure CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_ATL_x86: Install failed
    ERROR: DW050:  - Adobe Media Player: Install failed
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Support: Install failed
    ERROR: DW050:  - Adobe Bridge CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_ATL_x86: Install failed
    ERROR: DW050:  - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
    ERROR: DW050:  - Adobe XMP Panels CS5: Install failed
    ERROR: DW050:  - Photoshop Camera Raw: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS5: Install failed
    ERROR: DW050:  - AdobeColorJA CS5: Install failed
    ERROR: DW050:  - Adobe ReviewPanel CS5: Install failed
    ERROR: DW050:  - Microsoft_VC90_MFC_x86: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS5: Install failed
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - DeviceCentral: Failed due to Language Pack installation failure
    ERROR: DW050:  - AdobeTypeSupport CS5: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS5: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB: Install failed
    ERROR: DW050:  - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS5: Install failed
    ERROR: DW050:  - AdobeOutputModule: Install failed
    ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS5: Install failed
    ERROR: DW050:  - AdobeColorEU CS5: Install failed
    ERROR: DW050:  - AdobePDFL CS5: Install failed
    ERROR: DW050:  - AdobeCMaps CS5: Install failed
    ERROR: DW050:  - AdobeColorNA CS5: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFC_x86: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS5: Install failed
    ERROR: DW050:  - Microsoft_VC80_MFCLOC_x86: Install failed
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS5: Install failed
    ERROR: DW050:  - AdobeJRE: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS5: Install failed
    ERROR: DW050:  - Adobe AIR: Install failed
    Thanks.

  • T-code kbk6 (actual posting price)  error " Layout 1-N01 does not exist. "

    i tried to see t-code kbk6   (actual posting - actual price)
    it's have error Layout 1-N01 does not exist. full error message i show you below.
    how should i do.  i tried to create 1-N01 in KP65 (create planning layouts for cost element planning)
    i got error message You chose a name in a reserved name range -> Choose another name
    what should i do ? 
    please help.
    Layout 1-N01 does not exist.
    Message no. K9151
    Diagnosis
    Planning layout 1-N01 entered by you or set by the planner profile does not exist in the current client.
    This can have the following causes:
    The planning layout has not yet been created in Customizing.
    The planning layout is a layout delivered by SAP that has not yet been imported into the client to which you have logged on.
    SAP planning layouts begin with a number, user-defined planning layouts do not.
    Procedure
    If you require the user-defined planning layout 1-N01, you must first create it in Customzing.
    If planning layout 1-N01 is a layout delivered by SAP, you must first import this from client 000 in Customizing.
    a) For layouts from General Controlling, choose Controlling -> General Controlling -> Production Start-Up Preparation -> Transport System Settings -> Transport Settings for Planning -> Import Standard Planning Layouts.
    b) For layouts from Profit Center Accounting, choose Enterprise Controlling -> Profit Center Accounting -> Tools -> Transport Customizing Settings -> Transport Settings for Planning -> Import Planning Layouts.

    Hi
    The solution is outlined in the long text of the error, you need to import 1-N01 from client 000.
    To import the Standard Planning Layout 1-N01 from Client 000 use transaction code OKBF. The menu path is SPRO - Controlling - General Controlling - Production Start Up Preparation - Transport Settings for Planning - Import Standard Planning Layouts.
    Find the layout and execute the import. This should resolve the error.
    Elaine

  • Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel.  Help

    am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

    Hi,
    Here is a similar thread for your reference:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
    http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • Compilation error[ORA-02289: sequence does not exist] ,even if dbVersion '9.3.350',so strange!

    I know the reason is that PL/SQL is pre-compilation, so now dbVersion < '9.3.350', even if I don't need get REFDESIG_ID_SEQ.nextval ,
    it will also cause this compilation error. So my question is how should I code that?
    When dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ, just print '1####';
    else get REFDESIG_ID_SEQ.nextval , then print '2####'
    But now even if dbVersion < '9.3.350', it will cause compilation error[ORA-02289: sequence does not exist] .
    How to resolve this? Thanks a lot.
    declare
        maxid   number;
        nextid number;
        agileid number;
        v_date  date;
        dbVersion varchar(8):=0;
    begin
      select substr(value,1,7) into dbVersion from propertytable where parentid = 5001 and propertyid=37;
            DBMS_OUTPUT.PUT_LINE(dbVersion);
            if (dbVersion < '9.3.350') then
                  DBMS_OUTPUT.PUT_LINE('1####');
            else
                  DBMS_OUTPUT.PUT_LINE('2####');
                  select REFDESIG_ID_SEQ.nextval into agileid from dual;
            end if;
    end;

    In my DB, If dbVersion < '9.3.350' , no sequence REFDESIG_ID_SEQ
    When dbVersion >= '9.3.350' ,sequence REFDESIG_ID_SEQ will exist,
    Now my dbVersion < '9.3.350' , and this pl/sql also cause this error.
    SO how should I to resolve it ?
    Now I need a test case, if dbVersion < '9.3.350' , then print '1####';
    else , get REFDESIG_ID_SEQ.nextval   firstly , then print '2####'
    How should I code?Thanks  a lot.

  • Error: The preference path does not exist

    Subject:
    Error: The preference path does not exist:
    Oracle.Portal.Page(WWC-51000)]
    I can not resolve this error.
    Have you already experienced this error?
    I'm sending more information below.
    Regards, Dime
    DETAILS:
    ========
    ORACLE Product: iAS 9i EE, v1.0.2
    Platform: RedHat Linox 6.2, kernel 2.2.18
    HW Platform:
    IBM Intellistation 6889, Intel P2 350MHz, 384MB
    Problem:
    After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
    appears when we try to access the URL http://servername:port/pls/portal30:
    Error: The preference path does not exist:
    Oracle.Portal.Page (WWC-51000)
    About the Attachments:
    - init.ora.original (the original init.ora file)
    - init.ora.try1 (the file modified as described in the configuration guide)
    - init.ora.try2 (according suggestions in the discussion group on
    the ORACLE Metal Partners Site)
    - install.log (install.log generated with init.ora.try2)
    Regards,
    Dimitar Indovski,
    GORD Systems
    ATTACHMENT-1 (init.ora.original)
    db_name=DEFAULT
    db_files= 80 # SMALL
    db_file_multiblock_read_count = 8 # SMALL
    db_block_buffers = 100 # SMALL
    shared_pool_size = 3500000 # SMALL
    log_checkpoint_interval = 10000
    processes = 50 # SMALL
    parallel_max_servers = 5 # SMALL
    log_buffer = 32768 # SMALL
    max_dump_file_size = 10240 # limit trace file size to 5 Meg each
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    ATTACHMENT-2 (init.ora.try1)
    db_name=DEFAULT
    db_files = 80 # SMALL
    db_file_multiblock_read_count = 8 # SMALL
    db_block_buffers = 100 # SMALL
    shared_pool_size = 3500000 # SMALL
    log_checkpoint_interval = 10000
    processes = 50 # SMALL
    parallel_max_servers = 5 # SMALL
    log_buffer = 32768 # SMALL
    max_dump_file_size = 10240 # limit trace file size to 5 Meg each
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    max_enabled_roles = 25
    open_cursors = 50
    compatible = 8.1.0
    java_pool_size = 20
    ATTACHMENT-3 (init.ora.try2)
    db_name=DEFAULT
    db_file_multiblock_read_count = 16
    db_block_buffers = 550
    shared_pool_size = 31457280
    log_checkpoint_interval = 10000
    processes = 100
    parallel_max_servers = 5
    log_buffer = 32768
    max_dump_file_size = 10240
    global_names = TRUE
    control_files = (ora_control1, ora_control2)
    open_cursors = 300
    large_pool_size = 45000000
    java_pool_size = 32768000
    db_block_size = 8192
    ATTACHMENT-4 (install.log.gz)
    -----------------------------

    Dennis
    A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
    The Configuration Assistant determines the shared pool size from the view v$parameter,
    which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
    Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
    null

  • Error ORA-02289: sequence does not exist

    While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
    error ORA-02289: sequence does not exist
    I also checked the sequence, it does exist ,
    host-ids, db-ids, ap-ids all do exists
    I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
    I kind do not understand this too since my pc running windows xp
    any help would be appreciated since i couldn't go forward in my practice.
    I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.

    Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
    Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
    I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
    I kind do not understand this too since my pc running windows xp "

  • Build Error : The name "LocalizedStrings" does not exist in the namespace

    I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes 
    it shows the following error 
    The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
    Since it is bound, i need to build it, only then the text is visible :(
    Any suggestions?
    Alfah
    Alfahisham

    This is the declaration for the LocalizedStrings.cs
    namespace LoveCycles_Free
    public class LocalizedStrings
    public LocalizedStrings()
    private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
    public LoveCycles_Free.AppResources LocalizedResources
    get
    return localizedResources;
    And this is my App.xaml
    <Application
    x:Class="LoveCycles_Free.App"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
    xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >
    <!--Application Resources-->
    <Application.Resources>
    <local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
    <FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
    <FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
    <FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
    <Style x:Key="AnimatedButtons" TargetType="Button">
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
    <Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
    <Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
    <Setter Property="Padding" Value="10,3,10,5"/>
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="Button">
    <Border Background="Transparent">
    <VisualStateManager.VisualStateGroups>
    <VisualStateGroup x:Name="CommonStates">
    <VisualStateGroup.Transitions>
    <VisualTransition GeneratedDuration="0:0:0.2"/>
    </VisualStateGroup.Transitions>
    <VisualState x:Name="Normal"/>
    <VisualState x:Name="MouseOver"/>
    <VisualState x:Name="Pressed">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
    <DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    <VisualState x:Name="Disabled">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    </VisualStateGroup>
    </VisualStateManager.VisualStateGroups>
    <Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
    <Border.RenderTransform>
    <CompositeTransform/>
    </Border.RenderTransform>
    <Border.Background>
    <ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
    </Border.Background>
    <ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
    </Border>
    </Border>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    <Style x:Key="AddButton" TargetType="Button">
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
    <Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
    <Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
    <Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
    <Setter Property="Padding" Value="10,3,10,5"/>
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="Button">
    <Border Background="Transparent">
    <VisualStateManager.VisualStateGroups>
    <VisualStateGroup x:Name="CommonStates">
    <VisualStateGroup.Transitions>
    <VisualTransition GeneratedDuration="0:0:0.2"/>
    </VisualStateGroup.Transitions>
    <VisualState x:Name="Normal"/>
    <VisualState x:Name="MouseOver"/>
    <VisualState x:Name="Pressed">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
    <DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    <VisualState x:Name="Disabled">
    <Storyboard>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
    <DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
    </ObjectAnimationUsingKeyFrames>
    <DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
    </Storyboard>
    </VisualState>
    </VisualStateGroup>
    </VisualStateManager.VisualStateGroups>
    <Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
    <Border.RenderTransform>
    <CompositeTransform/>
    </Border.RenderTransform>
    <Border.Background>
    <ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
    </Border.Background>
    <ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
    </Border>
    </Border>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    </Application.Resources>
    <Application.ApplicationLifetimeObjects>
    <!--Required object that handles lifetime events for the application-->
    <shell:PhoneApplicationService
    Launching="Application_Launching" Closing="Application_Closing"
    Activated="Application_Activated" Deactivated="Application_Deactivated"/>
    </Application.ApplicationLifetimeObjects>
    </Application>
    Alfahisham

  • Import Error: The root directory does not exist

    Hi,
    I have some isuuses with importing the extended page. When I try to Import it throws an error.
    Root Directory does not exist.
    I am using the following command.
    import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
    G":
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
    Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
    abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
    be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
    mRN" because it violates scope restrictions.
    Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
    nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
    kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
    nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
    ause it violates scope restrictions.
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
    able style because it is inside "tableLayout".
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
    N" of stackLayout style because it is inside "tableLayout".
    Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
    tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
    referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
    ecause it violates scope restrictions.
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Import completed.
    But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
    Could suggest how to solve this problem.
    Thanks
    Prabhat

    Hi Tapash
    while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
    when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
    it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
    my concern is why i m getting this error
    my import command looks like this
    java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
    could u pls suggest some solution.

  • Error - Business partner 30000011 does not exist in role TR0151

    Hello,
    I am receiving an error "Business partner 30000011 does not exist in role TR0151" while creating a Fixed Deposit Transaction through FTR_CREATE.
    Whilst testing Fixed Deposit accounting in SAP Treasury, i was testing a scenario of a MINOR and his/her GUARDIAN. Both have been created as Business Partners. However, i have NOT created the Minor further as a Customer.
    I now have a MINOR defined as a Business Partner, a GUARDIAN defined as a BUSINESS PARTNER and CUSTOMER both and a relationship established between the two through the RELATIONSHIPS tab.
    After doing the above, i am trying to create a Fixed Deposit through FTR_CREATE where i am receiving the above mentioned error.
    In Customizing, i have checked that the TR0151 is assigned to COUNTERPARTY role and TR0154 to the BENEFICIARY role
    The GUARDIAN was created with BP role - Business Partner General and then changed to COUNTER PARTY. The MINOR has been created with BP Role - Business Partner General and then changed to BENEFICIARY.
    My expectation was that since MINOR is not defined as Customer, the system would not allow me to create a FD for the Minor and display such a message which would ask me to create the FD using the GUARDIAN as the Business Partner.
    Request your help on this.
    Regards,
    Murtuza.
    +91 9923205169

    Hi,
    It is not necessary that a business partner has to be linked to a customer account.  In certain cases, your house bank itself acts as a counterparty, in that case you can directly settle to your bank account instead of managing through a customer.
    For your case, you need to maintain the role of counterparty for MINOR as well.  Only if the business partner exists in that role can you create a transaction.
    Regards,
    Ravi

  • ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    database version 11.2.0.4
    rac two node
    CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
    (DESCRIPTION)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('lexer global_lexer language column LANGCODE')
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

    Like the error message says, you don't have a global_lexer.  So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters.  Please see the demonstration below, including reproduction of the error and solution.
    SCOTT@orcl12c> -- reproduction of problem:
    SCOTT@orcl12c> CREATE TABLE actci
      2    (description  VARCHAR2(60),
      3      langcode     VARCHAR2(30))
      4  /
    Table created.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: global_lexer
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    SCOTT@orcl12c> -- solution:
    SCOTT@orcl12c> DROP INDEX actci_ndx3
      2  /
    Index dropped.
    SCOTT@orcl12c> BEGIN
      2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
      3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
      4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
      5  END;
      6  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
      2  INDEXTYPE IS CTXSYS.CONTEXT
      3  PARAMETERS('lexer global_lexer language column LANGCODE')
      4  /
    Index created.

  • Input File repository server Error: The requested directory does not exist.

    Hi,
    Getting following error "The requested directory does not exist." for Input and Out put file repository server.
    The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
    The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
    Thanks,
    Manpreet

    @Siva,
    I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
    this was working prior to the Windows AD setup tried by me.

  • 404 Not Found,   Error: The requested resource does not exist.

    Hi all,
    When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
    404 Not Found
      Error: The requested resource does not exist.
    Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
    Regards.

    Hi
    Try with following link (VC should be in Caps) -
    http://localhost:50400/VC/default.jsp
    Also check whether you have proper admin roles assigned to your user id.
    Regards
    Sandeep
    Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

  • Oracle Text Index Error - DRG-10700: preference does not exist: CTXSYS.DEFA

    Hi we are having a Oracle 11g db.And we have installed CTX SYS package and provided the grants to the required schema.
    But while creating the oracle text index, following error is thrown:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-10700: preference does not exist: CTXSYS.DEFAULT_LEXER
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 365
    Following grnats are given :
    GRANT EXECUTE ON CTXSYS.CTX_DDL TO <schema_name>;
    GRANT APPOWN TO <schema_name>;
    GRANT CTXAPP TO <schema_name>;
    I have verifyed the ctxsys.CTX_PREFERENCES view which is having an entry as :
    SELECT PRE_OWNER, PRE_NAME
    FROM CTXSYS.CTX_PREFERENCES
    WHERE PRE_NAME = 'DEFAULT_LEXER';
    The Result is :
    PRE_OWNER     PRE_NAME
    SYS     DEFAULT_LEXER
    Can you please assist if there is a way to update the permission on this DEFAULT_LEXER preference to set the PRE_OWNER as CTXSYS ?
    Thanks

    That's odd. If I run the same query I see:
    SQL> SELECT PRE_OWNER, PRE_NAME
      2  FROM CTXSYS.CTX_PREFERENCES
      3  WHERE PRE_NAME = 'DEFAULT_LEXER';
    PRE_OWNER                      PRE_NAME
    CTXSYS                         DEFAULT_LEXERAre all your defaults like thsi? What do you see if you run
    select pre_owner, pre_name from ctxsys.ctx_preferences where pre_name like 'DEFAULT%';
    It would be easy enough to update the underlying table DR$PREFERENCES to fix the owner, but who knows what else might be wrong.
    Has this database been updated from a 9i installation by any chance?

  • Java communication error - RFC destination NOT_CONFIGURED does not exist

    Hello,
    We are facing problem when sending reports(BEx Quert) through broadcasting to the users. We are getting the error "Java communication error RFC destination NOT_CONFIGURED does not exist"  in the Log Display (Tcode: RSRD_ADMIN).
    In the broadcasting setting, if we select variable values in the tab "General Precalculation" then we can able to send the report to user, instead of selecting variable values, if we use the option "User Specific" check box in the tab Receipient(s) (which will take selection from the role authorizations defined in the respective user roles), then we are getting the above error.
    Recently we have upgraded suppor package, please find the system details below
    P_BASIS - SAPKB70025
    PI_BASIS - SAPKIPYM12
    SAP_BW - SAPKW70027
    Java - Support Package 25
    We didn't change any roles and authorizations recently, just upgraded to latest SP. Can anyone suggest if any steps or checks need to be perfomed after applying these SP or missing anything?
    Thanks in advance
    Regards,
    Venkatesh

    Hi,
    This is configuration issue. Please check the configuration between BW and EP below link:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&overridelayout=true
    Thanks,
    Venkat

Maybe you are looking for

  • MIGO : Error when copying batch characteristics

    Hi, I've some problem on MIGO Tcode when i want to copy the batch characteristics. I work with class type 022. I create a GR from PO. (movement 101). My item line contained sub-items (with BOM). So i would like to copy the batch characteristics in re

  • Where is the bulleted Paragraph option in ID CS5?

    I cannot find the bulleted paragraphs option in CS5! What am I missing? The top image is the customization panel in CS5. The second image is from CS4.  Where is the bulleted Paragraphs option in CS5? HELP –Steve

  • Dynamic selection button on report RCATS_APPROVE_ACTIVITIES

    Hi, I made a copy of the program RCATS_APPROVE_ACTIVITIES with all its components, and the dynamic selection button on the selection screen doesn't work like the standard. In my researches, I found that the dynamic selection that the standard program

  • Problems starting Crystal Reports Page Server and Report Application Server

    Hi, We have migrated to a new server and I have re-installed our Crystal Reports Server XI R1. It is being installed on a Windows 2003 SBS Premium Server with MSSQL 2005 Workstation Edition I have been told that I need to start the following Crystal

  • ODI Log file encoding

    Greetings Everyone! I faced the following problem. I load data through ODI in Hyperion. For convenient display I made my log file in excel *.csv format. Due to encoding the error description text in my log file is displayed uncorrectly. Is it possibl