ME22N - impossible to remove EKPO-WEUNB

Hi,
in some PO (services and limits) with cost center accounting category, the system sets automatically the flag in field EKPO-WEUNB.
And it is impossible to remove the flag.
I have noticed that for all of them the distribution indicator (in the details of the accounting) is set to distrib by percentage. I don't know where these conditions are being set (I only know that they are not set by the user).
Can anybody explain me how the GR non-valuated flag is managed?
Thanks for your help,
Stefania

For Jürgen:
the PO item has not multiple account assignment, the distribution indicator is set to distrib by percentage but it has only one record with 100%.
For Mohanaselvan:
1 - Check the account assignment you use was ticked with the GR Non-Valuated --> the account assignment has not the flag of GR-non-valuated
2 - Check the Indicator: Account assignment screen was set to 1 or 2. (1 is single acc/*** and 2 is multip/assign) --> it is set to 1
3 - Check the Distribution is set to 1 or 2. (1 is by quantity and 2 is by percentage) --> it is set to 1
Thanks a lot for your help,
Stefania

Similar Messages

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

IMPOSSIBLE TO REMOVE THE CD'S DVD'S from MAC 24

After burning it is IMPOSSIBLE TO REMOVE THE CD'S DVD'S from MAC 24
Do you know how to solve this problem?
Regards

Hi...
Try holding down the Eject key while booting up.
And try holding down your mouse when booting.
And try moving the CD or DVD icon on the Desktop to the Trash. The Trash icon will turn into an Eject icon.
If nothing above has helped...
Open Terminal located in HD > Applications > Utilities
Type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.

Tablet A8 5500: impossible to remove shortcuts/icons

Hello, My tablet is new, out of the box from a few hours.
It is impossible to remove any icons on the desktops: the bin does not appear! When I press a few seconds on an icon, I can only move it but not remove it.
I already did firmware upgrade and factory reset.
It drives me crazy. Did I miss anything?
Your help would be greatly appreciated. Thanks.

Thks for the answer. I used Lenovo Laucher... It's crazy it does not work! I did put apex launcher and it worked well now.

Custom Security Provider impossible to remove the MBean Jar File

Hi,
I am currently developping a custom security provider for Weblogic. I
have deploy my Mbean File Jar on a remote server weblogic running on
solaris. NO authentication provider for this security provider has
been defined in the console, it means there is no link with this
security provider. Nevertheless, when I remove the MJF the server
crashes when starting:
<...>
<May 21, 2003 3:37:08 PM CEST> <Critical> <WebLogicServer> <000364>
<Server failed during initialization.
Exception:weblogic.management.configuration.ConfigurationException: -
with nested exception:
[javax.management.MBeanException: Commo type:
be.fgov.minfin.ccff.security.provider.CCFFSimpleSampleAuthenticator is
not loaded. Checks MJFs.]
javax.management.MBeanException: Commo type:
be.fgov.minfin.ccff.security.provider.CCFFSimpleSampleAuthenticator is
not loaded. Checks MJFs.
at weblogic.management.commo.CommoModelMBean.load(CommoModelMBean.java:588)
at weblogic.management.commo.Commo.initInstances(Commo.java:241)
at weblogic.management.commo.Commo.init(Commo.java:125)
at weblogic.management.AdminServerAdmin.initializeCommo(AdminServerAdmin.java:477)
at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java:108)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:659)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
<...>
I have been looking through all the config file where the MJF
(removed) could be linked but I did not find anything.
I am really confused because with my local weblogic running on
win2000, there is no problem to remove this MJF.
Thx in advance,
tiggy

Tiggy,
Remove the userConfig directory under your domain directory. That should
fix the problem.
Thanks,
~satya
Tiggy wrote:
Hi,
I am currently developping a custom security provider for Weblogic. I
have deploy my Mbean File Jar on a remote server weblogic running on
solaris. NO authentication provider for this security provider has
been defined in the console, it means there is no link with this
security provider. Nevertheless, when I remove the MJF the server
crashes when starting:
<...>
<May 21, 2003 3:37:08 PM CEST> <Critical> <WebLogicServer> <000364>
<Server failed during initialization.
Exception:weblogic.management.configuration.ConfigurationException: -
with nested exception:
[javax.management.MBeanException: Commo type:
be.fgov.minfin.ccff.security.provider.CCFFSimpleSampleAuthenticator is
not loaded. Checks MJFs.]
javax.management.MBeanException: Commo type:
be.fgov.minfin.ccff.security.provider.CCFFSimpleSampleAuthenticator is
not loaded. Checks MJFs.
at weblogic.management.commo.CommoModelMBean.load(CommoModelMBean.java:588)
at weblogic.management.commo.Commo.initInstances(Commo.java:241)
at weblogic.management.commo.Commo.init(Commo.java:125)
at weblogic.management.AdminServerAdmin.initializeCommo(AdminServerAdmin.java:477)
at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java:108)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:659)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
at weblogic.Server.main(Server.java:32)
<...>
I have been looking through all the config file where the MJF
(removed) could be linked but I did not find anything.
I am really confused because with my local weblogic running on
win2000, there is no problem to remove this MJF.
Thx in advance,
tiggy

Nokia 2730 back cover impossible to remove

I just bought this phone and have spent 20+mins trying to open the back cover. I did push down and slide downwards towards the bottom of the phone but it just won't move. Youtube videos show this being done seamlessly. What's wrong with my phone?

Hi,
According to your description, seems the dutch language has already been set to the primary language, but the layout remains incorrect. I suggest you manually set the input method via
Control Panel\All Control Panel Items\Language\Advanced settings
Under "Override for default input method", choose the keyboard layout you'd like to be your default keyboard, and then tap or click
Save. check the result.
Regarding to removing the English language,
You will not be able to remove your primary display language, set a different language as your primary display language first instead. (though you mentioned that you've set dutch as primary language, I type this here to make a
confirmation)
Removing a language from your list does not uninstall its language pack. So you should uninstall it first before removing the language from your list.
Yolanda Zhu
TechNet Community Support

Is it STILL impossible to remove individual attachments from Mail messages?

Could someone tell me if I just cannot find it anywhere, or does Apple's Mail for Mavericks 10.9.1 still not permit the removal of individual attachments from email messages?

The only way is to restore the iPod to factory defaults/new iPod. I know that is not a desirable solution..

Vocal Transformer great but makes warble, impossible to remove?

The male to female is great . But i don't like that it makes a warble sound. and there doesn't seem t obe a way to remove it. I have soundTrack program too, is there a way i could take a Garageband made sound of my voice with Voice changer aplied to it... then fix it in Sound track? or what do i do?
GB 3.04.
Strack 1.5

Try this:
Drag all of your bitmap assets from the library to the stage. Click the Frame to select all of the items and set where you want the top left corner to be. Then run the Distribute to Frames command.
Does that sound like a workaround that would do the same thing you're used to the bmp sequencing doing?

Why is it impossible to remove the iPod touch screen without damaging it so that it cant be re attached?

My iPod touch heaphone jack broke for what must have been the 12th time for no reason, so I decided I was going to try and permanetly fix it. I saw a post on here saying that if you remove the screen and then make sure some wires are connexted properly, that you can fix it long term instead of having to hold the headphone cable in a strange position. So I remove the screen (which I have done before to replace the touch screen) and it pretty much all falls apart in my hands, the home button, the rubber sealing the outside of the screen and the actual screen all come apart, along with many small pieces of plastic. Now my iPod is no more that a paperweight with a useless LCD screen on it. Even if I did get a new screen, the headphone jack would still be unusuable and there would be no point.

I guess 4g is more complicated than 2g/3g. In 2g/3g it was way easier cause there are videos on youtube that anyone can do. Was your headjack stuck in the porthole? That is what happened to my sister's iPod. but my dad somehow got it out.

How to type a URL if Google search bar removed for privacy

Because it appears that in Safari it is impossible to remove the Google Search Bar that's off to the right at the top without also removing the now connected URL Location bar to its left, I removed both. I had noticed that when I did this in Camino, I could still go to a web page by clicking Command L for Open Location (found in the File dropdown menu of most browsers).
But in Safari just now, when I remove the Google search bar that Apple has hard coded to be inseparable from the Location bar to its left, I find I cannot use the File / Open Location command (which I mentioned is Command key - L) and therefore -- is my browser useless if I do not want to document my travels on the world wide web with Google's databases by having the Search Bar up?
In other words is it not possible to enter a URL into Safari in a blank and open the URL Location if you remove the Google Search Bar?
Is the only way to get to a webpage after removing that item to use one's old bookmarks to get to a page?
Or is this a bug and is my "Command key - L" (Open Location command) supposed to be working? I also started to test this with Firefox but it appears my Firefox browser does not have this problem so my Open Location bar remains even if I remove a search bar and the removable search bar it does have is not tied to google in particular, I don't think, in Firefox even if I remove the search bar though I never use a search bar anyway because I don't care to go to any search engine unless I type their URL into my Location bar personally. That's just my preference because I don't trust having third party search bars forced into the browser design.
Is this really true as it appears that there's no way to open a Location in Safari without having the annoying Search Bar up? Is Open Location disabled without the Google Search bar?
If so, it looks like that, of my several browsers, the only one that won't allow me to Open Location (go to a webpage that I type into a Location bar) if I remove the Google Search bar is Safari. I am finding I can successfully extricate myself from Google search if I use Opera, Camino, and Firefox and select Remove after right clicking on the search bar.
Why would the industry be trying to force this Google data mining and surf habits info collection on people? Evidently because Apple would rather take the money from google for forcing google into our browser than protect its customers privacy? I hope this disease does not spread to the other browsers left for me to use. What a monopoly google is building. Too bad antitrust litigation is dead.
(If this is true, this is depressing to me because I had set Safari to be my primary browser. But it seems the least secure browser anyway (compared to using NoScript with Firefox) so I guess I'll have to avoid using it (except on those few pages that won't work without it) until Apple starts taking people's privacy a little more seriously instead of sneaking in more and more features that force us into an unholy logging relationship with Big Brother Google. And I'm disappointed in this development also because I used to like Google before I realized its lawyers were so dedicated to writing privacy policies that are as vague as possible and as unprotective of privacy as possible. I would like to use Google more if they would just stop taking 100 miles when a person gives an inch by using their search engine. I get nervous any time I have to use anything connected with them as things stand and I really wish that would improve and that google will improve its privacy policies rather than finding new ways to log every movement a person makes on the Web.)

The question posed in this thread was:
How do I type a URL such as "www.apple.com" etc. into a blank in SAFARI to go to the URL if I remove the Google search bar?
I cannot seem to get Open Location (Command - L) to function if I remove the Google search bar. Removing the Google Search Bar seems to also remove the location bar to type into. This is not the case in Opera, Camino, or Firefox, so I am wondering if my Safari is just corrupted. If the only way to have the option of Open Location (Command L) is to put the Google Search bar back in, which means the two are connected, does that mean that Google is able to record all url's typed in the Location bar even if you don't use the Search bar? I believe the story used to be that any time you type a url into a google search engine, google records your IP and search; so I'm wondering if Apple has now set up the Location bar in Safari in a deal with Google to let Google track every URL you type into the location bar if it is the case that the Location bar is inseparable from Google Search.

OfficeJet Pro 8600 Plus fried by thunderstorm - how can I removed ink cartridges

A thunderstorm last week fried the power supply of my OfficeJet Pro 8600 Plus. The printer is beyond economical repair so I have ordered a new printer.
With no power, the ink cartridge carriage is stuck in the far right position where it is impossible to remove the four relatively new ink cartridges. Ink is not cheap ... would like to be able to salvage the ink cartridges from the disabled printer but cannot figure out how to release the carriage.
Any sugguestions would be appreciated.
This question was solved.
View Solution.

Hello ,
Welcome back to the HP Support Forums!
Sorry to hear about the Officejet 8600 taking that kind of damage in a storm. Regarding the inks not being accessible, the only thing I can think is to reference the carriage jam support guide.
A 'Carriage Jam' Message Displays on the Printer Control Panel
The only thing I can really offer as a suggestion is try manually moving the carriage over. If it is locked into position and are unable to move the carriage, if you fell comfortable, use a screw driver to "assist" the carriage to move. Since the printer is damaged and you are already planning / have replaced it, it wont hurt it.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Licence acceptance after downloading Adobe Reader XI:impossible to "accept" +once Licence on screen,

Licence for Adobe Reader XI, once downloaded succesfully appeared on screen
It is impossible to "accept" it (resolution is 1280 x800 )
Before downloading it was written that by requesting the download "you accept the licence conditions "
It is impossible to remove this licence from screen without shutting down PC (WindowsXP)

Not quite sure what you mean by "impossible"; does this help: http://helpx.adobe.com/acrobat/kb/cant-click-accept-acrobat-reader.html ?

Removing a Mail Account with no access

Hey everyone,
I have a Gmail account that I was using for a while and I added it in the Windows 8 Mail app months ago, and it was fine. Since then, I have deleted/closed the email address with Google. Now, I can't remove it from the Win 8 Mail app.
It's marked as "Needs attention" on the bottom right-hand list of email accounts. Because of that marker,
I cannot edit settings on the account. Clicking on it opens the "Connecting to a service..." pop-up, asking me to log-in to the account (that I no longer have access to). If I go into the settings charm and try to edit accounts there,
it's again marked as "Needs attention", and clicking on it there opens up the Connection pop-up again. The behavior occurs on all 3 of my Windows 8.1 devices, including my Surface 2.
Any ideas on how to get rid of it? I just want to get rid of that account from the app. If I need to go into the registry/AppData, I'm more than comfortable doing so. I just don't know where to look.

I am suffering from the same problem and I have been searching for an answer forever. Did you read the original question? "If I go into the settings charm and try to edit accounts there, it's again marked as "Needs attention", and clicking on
it there opens up the Connection pop-up again."
What this person is saying is that there is no ability or opportunity to 'Remove Account'. The 'Connecting To Service' message pops up and is asking that you to 'sign in'. You can't sign in to an account that doesn't exist and there begins the
endless loop.
I really find it hard to believe that there is no way to remove the account from the list after it has been deleted. I even went into Credential Manager and removed the account from there and rebooted to no avail.
Uninstalling the Mail App and reinstalling does not resolve the issue. Removing it from Credential Manager does not resolve the issue. No one has an answer? How can no one have an answer to this?
If any of you told me it is impossible to remove the account from the list - that would be an answer - at the very least I could put it to rest.
Thanks

Remove reader 7.0

Have been trying to update Reader for months. It won't install because it can't UNinstall its previous self. I have done everything suggested, starting of course with add/remove which says it can't be removed because it can't seem to find its original installation file or some such thing.
I have developed a hatred of Adobe products that rivals my hatred of george w. bush, and that ain't small.
I resent having to use software that wraps itself around the inner workings of my computer making it virtually impossible to remove...and then to be told that I have to PAY for support.
If anyone knows how to remove this piece of garbage so that I can install the, by now, many iterations past upgrade, please let me know. Once I can stop grinding my teeth, I will thank you profusely.
This is a Dell 4600, 512 mg RAM, 120 gb, HP Photosmart C4180 printer (though why that is important I do not know of course), XP Pro sp 2.

Cheryl,
1. Open "Browser"
2. Type in "WINDOWS INSTALLER CLEANUP UTILITY"
When "results"appear, look for "support,microsoft.com DESCRIPTION OF WINDOWS INSTALLER CLEANUP UTILITY"---Click
3. When page opens, scroll down to "Download the Windows Installer Cleanup Utility package now"--click (you can read instructions or not)
4. When "File Download-Security Warning" box appears---click "RUN"
5. After download completes--Open "Programs" and look for "WINDOWS INSTALLER CLEANUP"---click to OPEN
6. When "box" opens, look for 8.1.1 or ADOBE that you want to remove and "click" (Highlight)
7. At bottom of "Box"----click "Remove"
8. Go to "CONTROL PANEL"-"ADD/REMOVE PROGRAMS"-Adobe reader should have been removd.
9. Now "Download" Adobe Reader 8.1.2
I FOUND IT EASY AND FAST TO COMPLETE-----from a "BUSH" supporter

Remove MDI Window Title Bar

I want to remove the MDI Window Title Bar, because i already have noticed in this forum that is almost impossible to remove the whole MDI window in Forms 10g...
Is it possible??

Hi,
I need to look at the sources again, but from what I remember, you can't
Frank

ME22N - impossible to remove EKPO-WEUNB

Similar Messages

Maybe you are looking for