ME23N Error when trying to send PO via IDOCS to another system?
Hello Experts,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>
I just got the same problem. Everything worked fine when i was using message type ORDERS01, but when i changed it to ORDERS05 this problem started happening.
This might solve your problem. If you have it solved out can you tell us the solution you found??
regards,
Diogo
Similar Messages
-
T-code ME23N message when trying to send PO via IDOCS to another system?
Hello MM Experts,
I am not sure if my question is more for ABAP guys , but since it is MM related I decided to share it with MM experts as well.
I am getting wired message what I am trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>Hi Boby ,
TRY going thru this link and check for the details given in it wether they are in place or not specially in the message controls, viz: application EF ,message type NEU and process code ME10
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
regards
kp -
Error message mes when trying to send PO via IDOCS to another system?
Hi Abap expert,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
BobyHi,
Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
Hope this is the error you are getting.
Thanks
Manju -
Error When Trying To Send MMS via email
Ive been trying to send an MMS via email. Ive got it to work a couple times but other times I get a message that says: MAILER-DAEMON.....etc....remote host said: 550 SMTP connection refused [BODY]"....
I sent the pic message to a verizon phone by emailing to [email protected]
please help. thanx.
kevI'm not sure why a Verizon subscriber not updating the PRL for their phone affects this, but it can.
As already provided, ask the Verizon subscriber to update the PRL for their phone per the instructions included with this link, which should resolve the problem.
http://www.verizonwireless.com/care/popups/prl.html -
ERROR MESSAGE WHEN TRYING TO SEND IPHOTO VIA E-MAIL
DRIVING ME NUTS, CAN ANYONE ASSIST? TRYING TO SEND PHOTO'S FROM MY IPHOTO ACCOUNT VIA E-MAIL KEEP GETTING SERVER DOES NOT RECOGNISE ACCOUNT/PASSWORD MESSAGE. ALSO I-CLOUD ACCOUNT REFUSES TO ALLOW ME TO SELECT MAIL FROM MAIL, CONTACTS & CALENDARS PREFERENCE
THANKS
TEDFirst unlock your caps lock key. Typing in all caps is inappropriate in online forums (considered shouting) and is hard to read.
iPhoto>Preferences>General. Select the email program or how you wish to email photos from iPhoto.
(There is an iPhoto forum for iPhoto questions). -
Error when trying to send an attachment
Hi there,
I am running an application in Tomcat 5.5 and I am trying to send an email with an attachment via java mail. The attachment will eventually be a zip file containing wav files but I can't seem to get it to work with a text file yet.
I may be a little confused...I am especially confused with the DataHandlerSet stuff.
Here is the code:
public String sendmail(String msgSubject)
//Sets some variables.
String emailmultipart = "true"; //if this is set to false sends a simple message.
String msgText = "Some text \n\n";
String smtphost = "myhost";
String emailto = "[email protected]";
String emailfrom = "[email protected]";
//Gives the path of where the sound files are.
File soundfile = new File("myfile.txt");
boolean debug = true; // change to get more information
String msgText2 = "multipart message";
boolean sendmultipart = Boolean.valueOf(emailmultipart).booleanValue();
// set the host
Properties props = new Properties();
props.put("mail.smtp.host", smtphost);
// create some properties and get the default Session
Session session = Session.getDefaultInstance(props, null);
session.setDebug(debug);
try
// create a message
Message msg = new MimeMessage(session);
// set the from address
InternetAddress from = new InternetAddress(emailfrom);
msg.setFrom(from);
//set the to address
InternetAddress[] address =
new InternetAddress(emailto)
msg.setRecipients(Message.RecipientType.TO, address);
//set subject - support request id
msg.setSubject(msgSubject);
//decides whether to send plain text message or multi text message (from true/false in the command line)
//sends a simple plain text email
if(!sendmultipart)
// send a plain text message
msg.setContent(soundfile, "text/plain");
//sends an attached file.
else
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
//adds the text as normal
mbp1.setContent(msgText, "text/plain");
// create and fill the second message part
MimeBodyPart mbp3 = new MimeBodyPart();
// attach the file to the message
//FileDataSource fds = new FileDataSource(filen);
FileDataSource fds = new FileDataSource(soundfile);
mbp3.setDataHandler(new DataHandler(fds));
mbp3.setFileName(fds.getName());
// mbp3.setContent();
Multipart mp = new MimeMultipart();
//adds the text to the message
mp.addBodyPart(mbp1);
//adds the attachment to the message
mp.addBodyPart(mbp3);
// adds the content to the message
msg.setContent(mp);
//Transport - sends the message.
Transport.send(msg);
catch(MessagingException mex)
mex.printStackTrace();
//log.debug("At end of Send email");
return "nothing";
}Here is the error:
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: "text/html" DataContentHandler requires String object, was given object of type class javax.mail.internet.MimeMultipart
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:566)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at questionnaireweb.Formemail.sendmail(Formemail.java:337)
at org.apache.jsp.web.emailrecorded_jsp._jspService(org.apache.jsp.web.emailrecorded_jsp:338)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:731)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
I'd be really grateful for any help. I can't seem to get past this error not matter what I try. Sending the simple mail works, but sending an attachment produces the error above. I have seen similar errors before but when the user actually wants to send html and not a file.
Thanks a lot,
JessHI ,Thanks for your response. That was an error in the code I posted, but wasn't the error I was trying to solve. Once correcting that error you pointed out I am getting the problems not when I send a plain text email like:
if(!sendmultipart)
// send a plain text message
msg.setContent(msgText, "text/plain");
}but when I try and send multipart messages doing this:
else
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(msgText);
// create and fill the second message part
MimeBodyPart mbp3 = new MimeBodyPart();
// attach the file to the message
FileDataSource fds = new FileDataSource(soundfile);
mbp3.setDataHandler(new DataHandler(fds));
mbp3.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
//adds the text to the message
mp.addBodyPart(mbp1);
//adds the attachment to the message
mp.addBodyPart(mbp3);
// adds the content to the message
msg.setContent(mp);
}So i get the error when executing the else branch.
Can you spot any errors here? I get the same error as mentioned earlier.
Thanks a lot,
Jess -
FTP error when trying to send crystal report to FTP destination
Hello experts.
I am trying to send a crystal report to a FTP destination. I have enabled the FTP destination on all servers that have a destination option. I am able to connect to the FTP site manually from the server that is running crystal reports server. However every time I try to run the report in CMC, it fails with the following message:
Error Message: connection error. CrystalEnterprise.Ftp: WSA11004
Any ideas on what this message means and how to fix the issue?Here's the details of the Note
Symptom:
Scheduling of the Crystal Report to FTP destination prompts the Error: Connection error, CrystalEnterprise.Ftp: WSA0.
Cause:
Every time when Crystal Report is scheduled to FTP destination, a connection is made to FTP server from server where job server is installed. If there is limitation on connection being made to FTP server then this error occurs.
Resolution:
For FTP sites in IIS:
- Open IIS Manager
- Go to Properties
- Click on the FTP site tab
- In FTP site connections, check for Connection limited to :
- When report is long running do check how much time it takes to complete scheduling. - Accordingly change the connection time out setting in Properties of FTP site.
- For FTP sites created using FTP Server applications, setting for Connection limited to and connection timeout will remain same. -
Why do I get an error when trying to send email?
When I try to email a photo directly from iPhoto, I get an error message that tells me that server is unable to identify email name and password. WHY?
I verified and email address and password are correct>
Also, I have listed to email addresses on my MAC a Gmail address and a Comcast (other) account, but when I click on stamp for email on my desktop it opens both mailboxes in one place. Is there a way to separate them.
Any answer and help provided will be greatly appreciarted.Have you ever tried to access email via your iPhone in the past with this service? Has it ever worked? I'm looking at their support page and cannot find any information regarding access via a mobile device. I'm wondering since it is a satellite service that you cannot access their domain from cellular service. I'm not positive, but a search of their support page is not yielding much information.
Also, the incoming server is not your problem. It is the outgoing server or SMTP. According to the settings, it should be smtp.everyone.net. It does not use SSL for the outgoing server, and the username is your entire email address and then your password.
You should be able to use the information for the Mac mail that I found in this link. http://www.skybeam.com/support/helpful-guides/email-support/mac-mail/ If that doesn't work, I would call their support phone number and ask about using their mail on a mobile device. -
Java mail api: SendFailedException when trying to send Mail via SMTP
Hello,
I'm trying to send a mail via java mail api using a server that requires smtp authentication.
I'm currently using the following code:
protocol = "smtp";
host = "auth.smtp.profimailer.de";
port = 25;
String from="[email protected]";
String to="[email protected]";
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Authenticator auth = new PopupAuthenticator();
session=Session.getInstance(props,auth);
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from,"[email protected]"));
message.addRecipient(Message.RecipientType.TO,new InternetAddress(to,"ToName"));
message.setSubject("Hello JavaMail");
message.setText("Welcome to JavaMail");
Transport.send(message);
static class PopupAuthenticator extends Authenticator {
public PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication("e12345676", "mypass");
}When trying to run this code, I get the following exception:
D:\eclipse30RC1\workspace\ClassifyIt\bin>java -cp .;../lib/javamail.jar de.jwannenmacher.classify.TestMail > test.txt
javax.mail.SendFailedException: Send failed;
nested exception is:
javax.mail.SendFailedException: Sender "[email protected]" <jens
@jens-wannenmacher.de> was rejected: 501
at javax.mail.Transport.doSend(Transport.java:223)
at javax.mail.Transport.send(Transport.java:92)
at de.jwannenmacher.mail.pop3client.POP3Client.getAllNewMessages(POP3Cli
ent.java:176)
at de.jwannenmacher.classify.TestMail.main(TestMail.java:22)
Any suggestions on this?
Thanks and best regards,
JensHi,
yes smtp is a standard and I think you could use this with almost every smtp server.
If your smtp server doesn't require authentication you can access it without an authenticator
I think...
Best regards,
Jens -
Error when trying to send questionnaire (SURVEY)
Hi All
I have designed and built a questionnaire using the SURVEY transation in BIW. I am now testing the send to function but I am unable to send this to users as the following error occurs;
You have recieved a status for the following doc:
Encues.
Sent:
14.05.2007 10:16:28
Sent By:
Christopher John Burleigh
Status for destination [email protected]:
Internal Error: CL_SMTP_RESPONSE error code ESMTP unknown 554 554 <[email protected]>: Sender address rejected.
I have think the SCOT transaction where SMTP email con be configured may help but after trying I can't see how.
Please Help!!!
Thanks in advance
ChrisHI ,Thanks for your response. That was an error in the code I posted, but wasn't the error I was trying to solve. Once correcting that error you pointed out I am getting the problems not when I send a plain text email like:
if(!sendmultipart)
// send a plain text message
msg.setContent(msgText, "text/plain");
}but when I try and send multipart messages doing this:
else
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(msgText);
// create and fill the second message part
MimeBodyPart mbp3 = new MimeBodyPart();
// attach the file to the message
FileDataSource fds = new FileDataSource(soundfile);
mbp3.setDataHandler(new DataHandler(fds));
mbp3.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
//adds the text to the message
mp.addBodyPart(mbp1);
//adds the attachment to the message
mp.addBodyPart(mbp3);
// adds the content to the message
msg.setContent(mp);
}So i get the error when executing the else branch.
Can you spot any errors here? I get the same error as mentioned earlier.
Thanks a lot,
Jess -
Error when trying to create complaint via IC WebClient (CRM 5.2)calling URL
Hi,
I'm trying to create a complaint using the following URL: http://<host>:<port>/sap/bc/bsp/sap/crm_ui_frame/default.htm?crm-object-type=BT120_CPL&crm-object-action=D, but get always the following error:
Error when processing your request
What has happened?
The URL http://<host>:<port>/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CMZ : The current application triggered a termination with a short dump.
The error occurred on the application server sapcmzu_CMZ_86 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BOL_BO_COL~ADD of program CL_CRM_BOL_BO_COL=============CP
Method: IF_BOL_BO_COL~ADD of program CL_BSP_WD_COLLECTION_WRAPPER==CP
Method: IP_FOLLOWUP of program CL_BT120H_C_MAINWINDOW_IMPL===CP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
In ST22 I find the following text:
Diagnosis
An attempt was made to add an unattached object (NULL reference) to
a business object collection or entity collection of the Business
Object Layer (BOL) by using method IF_BOL_BO_COL~ADD. This is a
method application error.
But on the other side the change method works well:
http://<host>:<port>/sap/bc/bsp/sap/crm_ui_frame/default.htm?crm-object-type=BT120_CPL&crm-object-action=B&crm-object-keyname=GUID&crm-object-value=DC445922DEB133F1939A00145EF80CCC
Is there anybody with experience regarding this issue? Perhaps the parameters are wrong?
Kind Regards,
ChristianHi Sudipta,
many thanks for your answer. But sadly it still does not work. I have created a new GUID using function module 'GUID_CREATE' and have appended it to the url:
http://<host>:<port>/sap/bc/bsp/sap/crm_ui_frame/default.htm?crm-object-type=BT120_CPL&crm-object-action=D&crm-object-keyname=GUID&crm-object-value=47CD5B2204B619B9E10000000A8031BA
Now I'm getting the following exception:
Error occurred during navigation
An exception has occurred Exception Class CX_BOL_EXCEPTION - Access Previously Deleted Entity
Method: CL_CRM_BOL_CORE=>GET_RELATED_ENTITIES
Source Text Row: 18
Is there still something wrong with the url?
By the way: is there any documentation regarding this topic? I did only find a blog, nothing else.
Kind Regards,
Christian -
I am trying to send a Group MMS text. There are 6 recipients. I hit "send" and the progress bar goes almost to the very end, and then hangs up....and eventually I get a "Not Delivered" error message. I click on the "i" icon and it says "your message was not sent. Tap try again to send this message." I've done that time and time again, and the same thing happens. What am I doing wrong?
Try sending it as a regular text message... turn off iMessage.
-
Unknown Error When Trying to Send & Collaborate Live
When I try to share a file using Send & Collaborate Live, I get "an unknown error has occurred" in Acrobat while trying to share a document. I get another message after closing out the error message dialog box that tells me Acrobat "could not save this PDF file with collaboration enabled." Any idea on what is happening?
Me too - same thing. It eventually continues to successfully upload after I "OK" the error window. Today, a client can't open the PDF without being prompted for a password, although I've sent it as an open file to anyone who knows the link. I'm wondering if that's tied into this error, although another client is having no problem commenting on their shared PDF even though I've been getting that unknown error for a few weeks now. Help anyone?
-
Remote Desktop Services Error when trying to send a message to a user in the collections
We are implementing RD for thin clients and when I try to send a message to a user I get an error that states,: Unable to send a message to session X on (SERVER NAME.COM). WTS API Failed
Is there a service that needs to be turned on?
Thanks EPKHi,
Thank you for posting in Windows Server Forum.
Before sending message please check following considerations.
- You must have Message special access permission to send a message to a user.
- You can send messages only to users whose sessions are in the active or connected state.
- You can send a message to a user session in Remote Desktop Services Manager by using the Send Message action.
Send a Message to a User
http://technet.microsoft.com/en-us/library/cc754124.aspx
Else you can also try below script and check the result.
Send-NetMessage - Net Send / Msg.exe
http://gallery.technet.microsoft.com/scriptcenter/Send-NetMessage-Net-Send-0459d235
Hope it helps!
Thanks.
Dharmesh Solanki -
I just got the HP8600. I set up eprint according to the instructions. When I email a document to the printer, I get a Mail Delivery error:
This message was created automatically by the mail system (ecelerity).
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
>>> [email protected] (reading confirmation): 550 5.7.1 Command
>>> rejected
I know the email address is correct. I don't know what to do to get this to work.The Q.com provider seems to have issues sending to our servers for some reason. Other email providers will work fine like you've found with your gmail account. The best workaround at this time is to send from your gmail account if possible.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!
Maybe you are looking for
-
How to create a grid-gallery ?
I want to create a gallery similar to this one : http://jeretslack.com/ featured on this page: http://www.adobe.com/be_en/products/muse/jeret-slack.html basically, i want to use the thumbnails as the main images of the gallery (so no lightbox) When y
-
How to change color of blank white background that shows before sites load?
The trick used to be to place a line in a UserChrome.css file. There was an update quite some time back and it seems Firefox doesn't even use this file anymore so I'm right back to seeing these eye-melting blank white pages on my monitor for a brief
-
When I log onto the internet, Firfox opens my home page twice and simultaneously.
Happens randomly, but several times a day.
-
Check in Similar not populating custom metadata value set by global rule
I have created a global rule to set the default value for custom metadata field creation date as current system date.This rule is working fine for normal check in but when i am using check in similar functionality of ucm the creation date value is ge
-
HI Can anybody guide me how to hide the field describe requirement in Shopping Cart. Regards Ambika