Me23n Print preview display problem for specific o/p type

Hello gurus,
A small problem..
I have modified the Smartform for a specific o/p type in PO and the moved to PRD
when seeing the Print preview in me23n the Smartform is not being displayed in PRD....
all other setting in ->messages, further data in me22n are same as for other o/p types..
The poblem is only for this o/p type POs all other o/p types the print-preview is displaying the form..
suggestions required...
thnks in advance

sorry dev...
hi srikar
i think there is a missing of cluster table ..
check the t-code se09
go to the customizing release request .
there is a ur updated nace release request number.
expand that request number .
see there is an another request number.
again expand it.
check whether there is a view cluster maintenance data or not?
if it is present.
expand it there u see the cluster table.
else.
u mistaked in nace transport.
regards
surender
Edited by: surender on Feb 5, 2009 12:18 PM

Similar Messages

Me22n/me23n Print preview reg

Hi,
In ECC6.0 ME22N/ME23N Print preview is not working.Is it working for anyone .

In the case of documents that have not yet been released, a message is generated which cannot, however, be outputted.
You can tell that a certain message cannot be outputted by the fact that the Blocked indicator is set in the Additional details for the message.

Is there a print preview button available for Firefox 8 please?

''locking as a duplicate - https://support.mozilla.com/en-US/questions/895214''
Is there a print preview button available for Firefox 8 please?

Hi the-edmeister, thank you for your post. I have tried this and found the button to be there as you said but the print preview function does not seem work with Firefox 8. Unless I am doing something wrong. In the add-ons section I could only find print preview button for 0.7.7 this I have installed with above result. Could you have another look for me please to see if there is anything else I can do? Many thanks. Juco

Problem while print preview purchase order for new document type

Dear Experts,
I have got the problem as below and need your helps.
I created a new purchasing document type and then created a new PO with this document type. PO was created successfully in the system. I added a message to print out PO with the followed parameters as NEU output type, 1.Print Out medium , VN partner function, dispatch time is 3 ( Send with application own transaction).
Then, I clicked Print Preview button on the ME23n screen, the error message bellowed was shown
"The combination of document type
and Purchasing organization is invalid.
please check the document and change it.
unable to print the form"
I really want to print the PO with new purchasing document type on the existed purchasing organization, Could you please help me identify the problem and solution for this issue?
Appreciate for your responses.
Thanks,
Tinh Vo Trung
Edited by: Tinh Vo Trung on Sep 23, 2011 7:43 AM

Dear All,
Many thanks for your responses.
Regarding to maintain the condition record in MN04, I already done for that but the problem was not resolved.
Could you please come with the other posible causes and solutions for this issue?
Dear Bijay Kumar Barik,
Please let me know why we check the new document type in Program, Routine and From of NEU output type?
p/s: I compared the version the program, FORM and routine of NEU output type and found that there is no the differences btw DEV server and QAs server. However, An PO created susscessfully in QAs server, but the error was happend in DEV server.
Could you please come with the other posible causes and solutions for this issue?
Thanks,
Tinh Vo Trung

Print Preview in Safari for Windows does not display Flash object

I have a web page with images, text and a flash movie in several divs. I can see all the objects on the page but when I print preview the flash object is not displayed. The same problem occurs in Firefox 3 but not in IE6/7 or Opera9.5
Any clues/help would be greatly appreciated.

Click Help -> Report Bugs to Apple.
I'm hoping they fix it.

ME23N Print Preview problem

Hi,
When I click on button Print Preview in transaction ME23N it get a screen with an ABAP List in place of sapscript form preview.
Until the last week it was normal, someone know what happened? There´s someplace where I configure this?
Thank you all in advance.
Regards,
Charles Oliveira

Hi Ackroyd,
I already check SPRO. It seems normal.
Like I´ve said, until last week it was normal. Now it is previewing the ABAP list and not only to one user and one ambient.
Just like you said, looks that someone changed the settings. But I don´t know what specific setting.
If you know, please let me know.
Thank you.
Regards,
Charles Oliveira

PO print preview displays incorrect setting in decimal places

Dear Experts
Please help me on the following condition.
I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency.
It shows USD 1.404,00 whereby the amount should be USD 1,404.00
This only happens to a certain vendor that is doing PO for the first time from that country
Example:
I'm creating a PO for vendor 123. Vendor 123 is located in country A. No PO has been created for any
vendor in country A before. When I saved my PO, in print preview, the decimal setting is not correct.
But when I'm creating another PO, for vendor 234. Vendor 234 is located in country B. There have been
several POs created for vendors in country B before. When I saved my PO, in print preview, the decimal
setting is correct.
Both vendor 123 and vendor 234 is using currency of USD.
Is there any other setting with the vendor master in regard with the currency decimal setting for each
country for the vendor? Or something that I've missed out?
Diagnosis:
I've checked with the user profiles->default-> decimal notation. It displays 1,234,567.89 correctly
I've also run OY04, but the decimal setting is correct.
Thank you
Regards
Syukri

this has nothing to do with print preview, it is just basic country setting (OY01) how a quantity and value is written on a PO to a vendor is country xyz.
German uses to comma to seperate decimals, while USA uses the point to seperate decimals
this would be the German version 1.404,00, and this the US version:: 1,404.00
so if an American sends a PO to a German vendor, then the document will show 1.404,00 so that the German can understand that he wants 1404. (and not 1000 times less)

Print Preview not working for Adobe forms

Hello experts,
I am new to designing of Adobe forms. I have the following installations already in place:
1. ADS
2. Designer 7.0
3. Adobe Reader 8.0
I am trying to execute the standard report FP_EXAMPLE_01 to test whether Adobe forms work coherently with my system config is fine.
When trying to execute thsi report prg , I get a very perculiar message on clicking on print preview bttn "ADS: Request start time: Tue Feb 05 12:25:05 IST 2008(200.101) "
Now I am not sure whether it is a Basis issue with the ADS config or Printer settings ?
Please advise.
Regards,
Sonika

Hi Sonika,
That is not required functionality. it should display a Adobe Form for Invoice processing.
I doubt there might be some problem with ADS configuration.
Can you please do the following test and let me know the result ?
If the Adobe Interactive Forms have been installed correctly, the
following tests should run without errors:
First test:
1) Call transaction SE38.
2) Enter the report name "FP_PDF_TEST_00" and choose "Execute" (or press F8).
3) Enter "ADS" in the entry field for the connection, and choose
"Execute" (or press F8).
4) The system should issue a dialog box containing the current version
information.
Second test:
1) Call transaction SE38.
2) Enter the report name "FP_TEST_00" and choose "Execute" (or press
F8).
3) Enter "FP_TEST_00" for the form, "2" for the number of output pages,
and "ADS" for the ADS connection. The choose "Execute".
4) Enter a valid output device and choose "Print Preview".
5) The Adobe Reader should be displayed in the GUI, and display two
pages with numbered lines.
Third test:
1) Call transaction SE38.
2) Enter the report name "FP_TEST_IA_01" and choose "Execute" (or press
F8).
3) Enter "FP_TEST_IA_01" for the form, "ADS" for the ADS connection, and
any data in the other entry fields (these are already filled with
default values). Then choose "Execute" (or press F8).
4) Enter a valid output device and choose "Print Preview".
5) The Adobe Reader should be displayed in the GUI, and display a page
with address fields.
6) Scroll down to the frame for the new address, and fill in those
fields.
At the end of the form, an entry field for the date and a value help
exists. Choose the input help button and check if the system displays
the datepicker.
Now you will know yourself if there is any problem with ADS configuration.
Cheers
Satya

Text in samrtforms when print preview display as ####

Dear friends,
I have got the problem about smartforms, I have created my own smartform with original language TH and created the text node with Thai and English including Numeric Character. But when I executed the form to print preview, any texts cannot be read, its display as ###### neither I logon with TH nor EN Language. Please advise.
Ps. any texts in text node when seeing in smartforms can be read normally, it got the problem when print preview.
More information of my smartforms:
1. Language Attributes: Original is TH, Translate to all language, do not tick any checkboxes of Access area.
2. SAP version is ECC 5.0, Basis and ABAP Support Package is 014 Release 640, Application Support Package is 008 Release 500.
3. Kernel Release 640 Patch Level 101, Oracle 8.1.7, DBSL version 640, Patch Level 101.
4. OS Windows 2000 Service Pack 4
Thank you in advances,
SeMs

Hi!
Which printer do you use?
Check in the transaction spad which printer and printerdriver you use. Dobbleclick on the printerdriver and check which codepade is assigned.
I think it has to be one of the following codepages:
8600     Thai Codepage ISO988/2533
8604     Microsoft Windows 874 for Thai
8611     Thai Printer Codepage 1 (EPSON ESC/P2)
8616     Printer HPLJIIID (Thai)
8617     Thai Postscript printing
8634     Thai Printer codepage (THSAPWIN)
Pleas try this.
BR
Silvio Hey

Junk character in ME23N print preview

Hi
the bleow text is maintained in at item level in tab strip 'Texts' in ME23N for Purchase order.
PRIX : 77,00 u20AC
REMISE 18 % : 13,86
Test ajout euro u20AC u20AC
autre test u20AC
when click on print preview.text is displayed as shown below
PRIX : 77,00 #
REMISE 18 % : 13,86
Test ajout euro u20AC#
autre test u20AC
Please suggest me the solution.
Regards
Kiran

Hi,
is a placeholder for non printable signs such as horizontal tabs and many others.
Please check the hex content of the text in debug mode. There should be no spaces there.
Regards,
Klaus

How to find Print Preview in APP for payment advice.

Hi , Freinds ,
Payment Remittance Advice
My requirement is when Iam running APP , the print program is RPFI_RFFOAVIS_FPAYM and the standard form is F110_IN_AVIS . I could not view the Script output after running vendor payment.
Where should we be able to view the printpreview for this . My requirement is to modify the form based on client requirements..But i could not view the preview...
please reply..
thanks..

Hi,
Open the form F110_IN_AVIS in form painter(SE71).
GOTO>Utility>Printing Test
Select Print Preview Button or press F8 key.
This will display the preveiw of form.
Thanks.

Print preview invoice issue for a parcular invoice in vf03

Hi,
I am facing an issue with the print preview invoice. I have 2 billing document nos., for billing document 3117101008 when I go to "Billing Document"->"Issue to output"-> and click on "print preview" I get an output, but for the other billing document 3117101007 when I click on "Print preview" nothing happens, it just keeps on loading and everything gets hanged.
Do I need to do any modifications in my custom include "YV0023INV_PRINT_F01" or is there anything linked with the header details table 'IT_HU_HEAD'.
Please advise, appreciate your efforts.
Thanks

Hello Bawneet,
Are you facing this issue only to this billing document ?
Did you check the same for 1008 billing document ? First try to open 1007 and then next open 1008 document, here please check are you facing the same issue like screen keeps on loading issue.
Please check this and come back with your issues.
Thanks & Regards,
Lakshmi S

Differentiate between print and print preview event trigger for sapscript

Hi guys,
For sapscript, is there a way to know if the user presses the print or the print preview button? I need a way to determine if it is a print or print preview event triggering.
I've checked the OPEN_FORM fm but found nothing useful.
Please help. Thanks in advance.

This is not supported by SAP, but well this is a possibility:
FIELD-SYMBOLS <ls_itcpp> TYPE itcpp.
ASSIGN ('(SAPLSTXC)ITCPP') TO <ls_itcpp>.
IF sy-subrc = 0.
* here you may use <ls_itcpp>-tdpreview
ENDIF.
Another way maybe is to declare the interface work area ITCPP (shared data in the same internal session):
TABLES ITCPP.
* here you may use itcpp-tdpreview

VA01 Item category display only for specific order type

Hi,
I have a requirement to deactivate(display only) item category field in VA01 table item for certain order type . I tried the user exit MV45AFZZ(USEREXIT_FIELD_MODIFICATION). This is working only if the table item has a value. i.e I could able to enter an item category first and then enter the material and quantity.
So please suggest any alternative how to make the item category field(VBAP-PSTYV) column display only for centrain order type.
Regards
Aromal R

Hi,
Create a Custom Authorization Object so that you can control it for certain users. 2. Write implicit enhancement spot in the include TCS MV45AF0T_TCTRL_U_ERF_AUFTRAG_I,
FORM TCTRL_U_ERF_AUFTRAG_INIT
AUTHORITY-CHECK OBJECT 'ZITMCAT'
          ID 'ACTVT' FIELD '02'.
IF SY-SUBRC NE 0.
*    DATA: WA_COLS LIKE LINE OF TCTRL_U_ERF_AUFTRAG-COLS.
LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
   IF WA_COLS-SCREEN-NAME = 'VBAP-PSTYV'.
   WA_COLS-SCREEN-INPUT = 0.
   WA_COLS-SCREEN-OUTPUT = 1.
MODIFY TCTRL_U_ERF_AUFTRAG-COLS FROM WA_COLS.
   ENDIF.
ENDLOOP.
ENDIF.
Regards
Aromal R

Displaying time for specific dept record by adding 10 minutes

Hello,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
create table dept(
dept_id number(14) primary key,
c_id number(14) constraint dept_fk references centers(c_id) NOT NULL,
deptName varchar2(50)
create sequence dept_seq
start with 1 increment by 1;
create or replace trigger dept_trig
before insert on dept
referencing new as new
for each row
begin
select dept_seq.nextval into :new.dept_id from dual;
end;
create table shiftManager(
s_id number(9) primary key,
dept_id number(14) constraint shiftManager_fk references dept(dept_id) NOT NULL,
title varchar2(110), /**e.g. Morning, After noon, Evening **/
startTime date,
endTime date
create sequence shiftManager_seq
start with 1 increment by 1;
create or replace trigger shiftManager_trig
before insert on shiftManager
referencing new as new
for each row
begin
select shiftManager_seq.nextval into :new.s_id from dual;
end;
select to_char(startTime,'HH24:MI'),to_char(endTime,'HH24:MI')
from shiftManager where dept_id=1 order by startTime asc;I want to select startTime by adding 10 minutes till the endTime for specific dept_id e.g.
dept1
=====
startTime=09:00 and endTime=14:00
OUTPUT required:
================
09:10
09:20
09:30
09:40
09:50
10:00
13:40
13:50
14:00
Thanks in anticipation
Best regards

Use:
select to_char(column_value,'HH24:MI') tm
from shiftManager,
        table(
              cast(
                   multiset(
                            select least(startTime + (level - 1) / 24 / 6,endTime)
                              from dual
                              connect by startTime + (level - 1) / 24 / 6 <= endTime + (600 - 1) /3600 / 24
                   as sys.OdciDateList
where dept_id=1
order by column_value
/For example:
SQL> select * from shiftManager
2 /
   DEPT_ID STARTTIME ENDTIME
         1 01-JUL-11 01-JUL-11
         2 01-JUL-11 01-JUL-11
SQL> select to_char(column_value,'HH24:MI') tm
2    from shiftManager,
3          table(
4                cast(
5                     multiset(
6                              select least(startTime + (level - 1) / 24 / 6,endTime)
7                                from dual
8                                connect by startTime + (level - 1) / 24 / 6 <= endTime + (600 - 1) /3600 / 24
9                             )
10                     as sys.OdciDateList
11                    )
12               )
13    where dept_id=1
14    order by column_value
15 /
TM
09:30
09:40
09:50
10:00
10:10
10:20
10:30
10:40
10:50
11:00
11:10
TM
11:20
11:30
11:40
11:50
12:00
12:10
12:20
12:30
12:40
12:45
21 rows selected.
SQL> SY.

Me23n Print preview display problem for specific o/p type

Similar Messages

Maybe you are looking for