ME28 Account Assignment Display

Hi Everyone....
Is it possible to display the account assignment in ME28? I have the ALV display turned on and was hoping there would be a button similar to that in ME2N that would toggle between the overview and the account assignment.
Any insight is appreciated.

i am assuming you meant field like G/L account number (in case acnt assignment is K) or SO number (in case of F) or asset number in case of A etc. ...if yes, then it is not possible in standard ME28 but you need to look for user exit relevant for ME28 to add new column to show account aissgnment data.
list of relevant ME28 user exit is given in below thread, check with ABAper and use relevant user exit
http://forums.sdn.sap.com/thread.jspa?threadID=1861865
yogesh

Similar Messages

  • Ship to party account assignment display

    Hi Gurus,
    My Client have a requirement like, one customer has different ship to party, now the user while viewing the accounting document after billing, he needs to which corresponding ship-to, the billing document is raised.
    To be precise, in customer ledger sold-to he needs the corresponding ship-to to be displayed, in accounting document.
    If we post a/c doc manually we can fill it in f-02, we can give reference, or header text. but FI document is posted automatically after billing.
    Please advice... thanks in advance

    Hi, Hrishikesh
    I agree with your point that ship-to- has no relevance to billing, but the concern is,
    For example C001 - Sold-to-party, have C002,C003,004 ship-to's.
    1. Now the delivery is done to C002- who plays only ship-to party role.
    2. Bill & payer to is C001 [Ship-to-party] as he plays all roll.
    3. Now the user has delivered to C002. and billed to C001. So now the user has no reference to which
        ship to that particular consighment has done, while checking the accounting document.
    4. So now the requirement is that, After doing VF01, the A/c doc gets posted which we can view in F-03
        right. When viewing ac doc in VF02, the FI user wants the reference to Which corresponding ship-to,
        this account is posted to C001's account. He wants to view it in same C001's Customer ledger.
    I hope my question is clear.....

  • Display mode for Account assignment category for NB document type

    Dear MM gurus,
    Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
    Thanks in advance.

    Hi,
    Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

  • ML81N Make FM fields display only in account assignment

    Requirement is to make FM fields already derived from PO (derivation working correctly) display only or add an error message. Easy I thought just go to config for SES and click on Additional Fields display only (Cost Center?, WBS element? there was no funds management fields available)...then after some time investigating
    Have debugged the transaction and found some possibilities.
    (1) BADI TR_GET_ACCNT_ASSIGN called in function FM_ACCOUNT_GET_COBL from MS_ACCOUNT_ASSIGNMENT.
    (2) User Exit EXIT_SAPLFMCH_001 called in function FM_CHANGE_AA_SUBST
    (3) Use FMDERIVE to somehow check the PO derivation
    Just wondered if anyone had taken this further before I spend a lot more time understanding the whole process in order to achieve a small bit. Please I am a technical resource not FM specialist.
    If I could understand the process flow, at least it might help me make quickest simplest solution.
    thanks,

    Hi,
    You can customize the field status in tx OME9 for the relevant account assignment category.
    But be aware that this customizing will be valid for all purchasing documents and transactions - not only for ML81N and the services area.         
    During SES postings, inheriting the FM account assignment from the reference PO is the standard and expected behaviour, so you may see that FMDERIVE is not called when the PO reduction is to be posted during ML81N. Instead, the FMAA is read from table FMIOI and fmderive is skipped in those lines (fi transaction keys KBS/WRX, for instance).
    I hope this will help you
    Kind regards
    Mar

  • Display GL/cost center description in account assignment tab in PR and PO.

    My user wants to display GL and cost center description in account assignment tab of PO and PR? How can we do this?

    Hi
    Someone added same kind of stuff in the net
    We have done the following to display GL account text in ME51N & ME21N
    We registered the SAP Object: R3TR FUGR MEACCTVI for our SAP Release: 701.
    - In SE51, we added the field text_sakto to screen 1100 (Single Account Assignment) in program SAPLMEACCTVI.
    - Via SE80, we added the following code to the flow logic of screen 1100 under PROCESS BEFORE OUTPUT: MODULE fill_text_sakto in the function group MEACCTVI.
    - Within the MODULE fill_text_sakto we added the following code:
    FORM FILL_TEXT_SAKTO .
    SELECT SINGLE txt20 INTO text_sakto
    FROM skat
    WHERE spras eq sy-langu
    AND saknr eq MEACCT1100-SAKTO.
    ENDFORM.
    Thanks
    Vishnu

  • Display standard Field Profit Center in Account Assignment Tab

    Hello all,
    i have a problem regarding display a standard field.
    The Business Case is that when i create a new shopping cart, on item level, on tab account assignment i want to display the field profit_ctr.
    i thought that i can maintain this in SPRO.
    Configure Field Control -> Configure for Fields of Substructures -> Metadata for Fields of Substructures and Table-Like Enhancements
    with new entry
    31         PROFIT_CTR     BUS2121
    but i can see this field when i create a new shopping cart.
    You have an Idea how to configure this ?
    greetz Chris

    Hi,
    Check SPRO configuration for account assignment settings @
    SRM server->cross application basic settings->account assignment->Define account assignment
    1. Check for your acc assignment category for ex. WBS , what are account assignment fields are maintained.
        if not there maintain profit_ctr from search help.
    2. If you are not able to track profit_ctr in search help then you may need to make respective profit center entry in table BBP_C_ACC_F and then perfom step 1.
    after above steps even you are not able to get profit center on screen then you may need to check
    1. Meta data configuration
    2. WDP component for profit_ctr field
    Regards
    -Vipin

  • Display Assignment Field for Mulitple Account Assignment Screen in MIRO

    Hi Members,
    I'm hoping someone may have the answer to a question concerning the transaction MIRO-posting an invoice.
    The issue occurs in MIRO on the Purchase Order tab. I have a validation rule which requires a value in the assignment field before the document can be posted. When multiple account assignment functionality is used to allocate the charges, there is no assignment field available. How can I configure the assignment field (ZUONR) to be present in this area?
    Your responses are appreciated.
    KF

    Thank you for your response.
    What is call point 2? Would this specify that the substitution rule would only apply to the multiple account assignment screen?
    If that is the case, this might provide one option.
    However, if it applies to the entire MIRO transaction, that will not be possible because we use the text field and the assignment field for other purposes in the transaction.
    Do we have any other options?
    KF

  • FI-FM: Partial clearing on account assignment (tcode fmfg_aapay)-No open items found

    Hello!
    We have activated business function PSM_USFED_PPAP3, then :
    -  Federal Government Functionality - activated ;
    - settings in Financial Accounting (new)---> Basic Settings --> Ledgers --> Partial clearing on account assignment:
                   - Activate partial clearing by acc.assignment:   Check
                   - Maintain relevant ledger for Split view : no entries maintained (there is only one ledger "FM", which is the leading ledger, no special purpose ledgers)
                   - Set supported document types: KR
                   - Set payment block: B
    Other settings:
         - FM activated, update profile 000101, document splitting (method 00...012), splitting characteristics: vobelnr, knbelnr, fipos, geber, gsber, fkber;
    document type KR : business transaction 0300 (vendor invoice).
    When we use tcode FMFG_AAPAY no open items are found (message FMFG_AAPAY009), even though there is a vendor invoice posted (tcode FB60, document type KR). The invoice is displayed in FBL1N as an open item and it is split according to the splitting characteristics (e.g. table fagl_splinfo is showing the split vendor items).
    Can you, please, explain why there are no open items found in FMFG_AAPAY?
    Thank you!

    Dear all,
    I am closing this issue since I got the solution apart from the mentioned above.
    There is no need to change the Document Type since that will only change the Document type for e.g. from KZ to ZR, nothing will happen in the accounting entry.
    Solution was there in the "Posting rule" which i defined for making Cheque Payment.
    There are options of "Posting Type" - 1 which is for "Post to G/L Account" - In this case, system will Post the following entry Dr. Outgoing Bank Account & Cr. Main Bank Account without looking for any "Open Item".
    Posting Type" - 4 is for "Clear Debit G/L Account", menans that if you are having "Open Items" and you want to clear those then only use this posting key.
    While testing I had not posted any payment to vendor in Bank Outgoing Account hence no question of having "Open Items" in Bank Outgoing Account. And I had made the selection of "Posting Type" - 4, which require "Open Items" for direct clearing, hence was getting the subject error.
    This is for everybodies information.
    Thanks & Regards,
    Shridhar Sawant
    FICO

  • No account assignment exist for service line.

    Good Morning
    When I try to create a Purchase Order by Shopping Cart created directly in SRM it works normally but when I try to create a Purchase Order by Shopping Cart created based on Purchase Requisition from R/3 it gives me the follow message: "No account assignment exist for service line 10".
    I´m in SRM Server 5.5 SP 11 and the R/3 version 4.7.
    Someone could help me?
    Thanks
    Edited by: Victor Hugo Santos Sousa on Jul 4, 2008 3:00 PM

    try to use existing  package number + 1.
    select MAX( packno ) from eban into w_packno where packno NE ' ' .
    v_packno = w_packno + '0000000001'.
    W_REQUISITION_ITEMS-PCKG_NO = v_packno.
    and also ref. link.,
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/MM-SRV-ACC+Account+Assignment

  • Ability to modify Account Assignment Category for Service Item Categories

    Dear experts,
    Our customer has a requirement to modify the account assignment category when the item category is set to "D" services on a PR and PO line item. This scenario is specific to indirect procurement scenarios in SAP ECC 6.0 MM.
    End users may potentially create a PR against a service item category with an incorrect account assignment category. These PRs are created using free form text. No service master exists in these scenarios. During the approval process or during PO creation, an approver or the buyer may need to correct the account assignment category. The account assignment category is "display" only and cannot be modified when the item category is set to "D". The user must delete the line item and create a new line item with the correct account assignment category. The copy function cannot be used because the account assignment copies from the existing line and cannot be modified.
    Any recommendations to this issue using standard SAP configuration solutions?
    Thanks,
    Jennifer

    Item Category to Account Assignment Category combination is already configured. For Service Item Category, we have three account assignment categories configured. All three categories are valid in different scenarios. Sometimes the user selects the incorrect account assignment category (out of the three available) depending on the business scenario. PT9F configuration is already set to Account Assignment category "optional". However, the account assignment category still cannot be modified on the PR when the item category is "D" service.
    Any other recommendations?

  • Multiple Account Assignment details for Service PRs

    Hi,
           I have developed a RFC for creating PRs. For multiple service PRs, multiple services are getting created but account assignment details getting created only for the first service line item. Iu2019m using BAPI_REQUISISTION_CREATE. Please provide me a solution.
    Regards,
    N.Senthil

    hi all,
          the issue has been resolved by passing the below mentioned values.
          wa_item_data-distrib = '1'.      "FOR MULTIPLE ACCOUNT ASSIGNMENT based on the quanlity
          wa_item_data-part_inv = '1'.     "FOR MULTIPLE ACCOUNT ASSIGNMENT
    solution got from
    http://wiki.sdn.sap.com/wiki/display/ABAP/BAPI_REQUISITION_CREATE
    http://www.sapnet.ru/viewtopic.php?p=9306
    Regards,
    N.Senthil

  • PO Account Assignment Tab in ECC - with Split Accounting

    Hello,
    We currently are using Funds and WBS Elements within our SAP system.  When both a fund and a WBS Element are used on one line item within the shopping cart, I am able to see all of the information (fund, wbs element, fund center, cost center, commitment item, etc).  However, after the purchase order is created and transmitted to ECC the "Account Assignment Category" is marked as "X - All aux.acct.assgts." and the account assignment tab only has the following column headers:
    - Sequential Number of Account Assignment
    - Quantity
    - Distribution Percentage in Case of Multiple Account Assgt
    - Cost Center
    - G/L Account Number
    - Order Number
    - Asset Subnumber
    - WBS Element
    - Sales and Distribution Document Number
    - Sales Document Number
    - Delivery Schedule Line Number
    - Unloading Point
    - Goods Recipient/Ship-to Party
    - Deletion Indicator: Purchasing Document Account Assignment
    I can see that the fund is within the EKKN table (Field: BP_GEBER) but for some reason ME23N does not have this field in the Account Assignment tab when the category is "X".  How do I add "Fund" into the Account Assignment tab so that it will be visible within ME23N?
    Thanks,
    Katie

    IMG \ MM \ Purchasing \ Account Assignment \ Maintain Account Assignment Categories
    Select details for AAC 'X' and view field settings below.  Set Funds \ Funds Center to required setting e.g. Display.

  • Sales order no and line item no in account assignment tab of line item no.

    Hi All,
    When we display a sales order and go to line item --> Account assignment tab --> we can see sales order no and line item no in that screen. We want to know from where this existing no. in that field is populating from.
    We want to know this as we want to check feasibility of changing sales order and item no to maintenance contract no and line item no. ( Maintenance contract we have to pick from notification)
    If anybody has any idea about this do let me know as this is urgent requirment.
    Effort will be rewarded.
    Thanks in advance.
    Edited by: Satish Bharambe on Jul 4, 2008 10:38 AM

    Hi Satish,
    You mean Accounting assignment tab-->In Settlement rule details
    If yes the order number which is coming in that field Sales order and for which sale order you are looking that details both are the same numbers(i.e Nothing but sales order number).
    When you create sales order system will give number of the sales order the number will come in this place.
    I hope it will help you,
    Regards,
    Murali.

  • How to Grey out cost center column in me22n screen(Account assignment tab)

    Hi All,
    I have tried many ways to do grey  out cost center column in account assignment tab of ME22N.
    i have created implementation for this class and method. 
    Class:CL_TABLE_VIEW_MM_2
    Method:PBO_TC_LINE
    Below is the my code snippet.Kindly let me know any suggestions.
    data:  l_tc type char100.
    data:  l_tabix type i.
         l_tc = '(SAPLMEACCTVI)DYN_1000TC-COLS'.
    FIELD-SYMBOLS:<fs_tcdata> type any TABLE,
                    <fs_wa> type any ,
                    <fs_lwa> type any,
                    <fs_screen> type any,
                    <fs_input> type any,
                    <fs_active> type any,
                    <fs_output> type any.
    *data:fs_wa type SCXTAB_COLUMN_IT.
       ASSIGN (l_tc) TO <fs_tcdata>.
       LOOP AT <fs_tcdata> ASSIGNING <fs_wa>.
          l_tabix = sy-tabix.
        ASSIGN COMPONENT 'INVISIBLE' OF STRUCTURE <fs_wa> TO <fs_lwa>.
           ASSIGN COMPONENT 'SCREEN-NAME' OF STRUCTURE <fs_wa> TO <fs_screen>.
           ASSIGN COMPONENT 'SCREEN-INPUT' OF STRUCTURE <fs_wa> TO <fs_input>.
           ASSIGN COMPONENT 'SCREEN-ACTIVE' OF STRUCTURE <fs_wa> TO <fs_active>.
           ASSIGN COMPONENT 'SCREEN-OUTPUT' OF STRUCTURE <fs_wa> TO <fs_output>.
           IF <fs_lwa> = space.
             CASE <fs_screen>.
                WHEN 'MEACCT1000-KOSTL'.
                 <fs_input>     = 0.
                 ENDCASE.
                 endif.
                 ENDLOOP.
    Regards,
    Hiriyappa

    As I can't see any complicated scenario in your requirement. So I suggest you can achieve this by simple standard configuration.
    Go to OME9, double click on the Account assignment category and make the field as Display.
    Then check in your PO.
    But I doubt, your requirement can not be simple like that.
    So either you didn't know the settings or your requirement is different or you are just trying to learn that can it be possible via coding.
    Let us know the appropriate reason for set it as display.

  • Budgeting thru Internal Order with Account assignment category 'A'

    Dear All
    I want Budgeting thru Internal Order with Account assignment category 'A'
    i.e
    Created Assets with Tcode As01
    Created Internal Order and assigned budget amount to IO with Tcode KO01 and KO22
    Created Purhcase Requisition with Account assignment catg as 'A' i.e asstes. Also given Internal Order No and Asset code in PR.
    Releases PR with ME54N
    Created Purchase Order with Account assignemnt catg as 'A' i.e asstes.  In Purchase Order it displays Internal Order No. and Asset code which i have given in PR in Account assignemnt tab on Item level
    Released Purchase Order.
    Now i am checking budget detail in Tcode : S_ALR_87013019  -> List: Budget/Actual/Commitments ,  Here it gives message , "No line item were selected " in Commitment line items.
    Actually  my requirement is , i want budgeting thru internal order and want to use Account assignment category as 'A' (Assets) in PR and PO.
    Why it's not showing detail in report S_ALR_87013019  .
    What is solution for my requirement. Is it possible with some configuration or by other options.
    Thanx & Regards
    Swati Shah

    Hi Swati,
    You can do this in Asset Accounting. By standard MIGO Posting Date is taken as capitalization date for asset. You can configure to make it 'Document Date'.
    So, whenever user is posting thru MIGO, he will have better control on deciding capitalization date by inputting appropriate date in Document Date Field in MIGO.
    Check this thread..
    Re: Depreciation start date for asset thru MIGO
    Regards,
    Sayujya

Maybe you are looking for