Me2dp purchase order downpayment request amount error

Dear All:
I use the me2dp to monitoring the downpayment request of the purchase order.
And  I finded a probelm
I have create a downpayment request use me2dp, the amount is 200.
The total of downpayment requests amoun is 200 if I run the me2dp report.
Then I reverse the downpayment request use fb08.
I thought the total of downpayment requests amoun should be 0.
But the system show the total of downpayment requests amoun 400 in the me2dp report.
Anyone help me?
Thanks.

Hello,
The system adds the Down Payment Request and the Down Payment together in that report. The Down Payment Request does not get cleared until you actually run the Payment Program. That will clear the Request.
Regards,
Marc

Similar Messages

  • Send SRM Purchase order Cancellation request to Vendor using SAP PI

    Hi gurus,
    We have to build an interface to send Purchase order cancellation request to vendor once the PO is deleted in SRM using PI.
    Could some one please send me out a document to set up this interface.
    Thanks in advance for your help.
    Regards,
    Catherine

    Hi Catherine,
    did you get any chance to go through the below links.
    Purchase Order from SRM to SUS ( Supplier Self Service )
    PO from SRM to supplier via PI 7.1 | SCN
    Thanks,
    Naveen

  • Purchase order discount per row error

    Dear all,
    I have a client who gets the following error when trying to post an Purchase order:
    "[Discount % per row] [Line 3], You are not permitted to perform this action"
    The purchase order is a service order and no accounts have been selected. Also the discount field is not visible or active on the purchase order. The user is not authorized to add discounts but he has not done so in the first place. What could the problem be?
    Regards,
    Anthony Njagi

    Hai!
    Even if Discount field is not active in Row Level, for service Type Documents when i change Total value more than once that is calculating the difference to Discount.
    Example:
    First i entered Total as INR1000
    I found that is wrong and changed to INR1200
    The Difference between INR1000 and INR1200 will go to Discount.
    To avoid this, ask user to type the amount in Unit Price Column instead of Total Column.
    Regards,
    Thanga Raj.K

  • Purchase Order Crystal Report Layout Error

    The stock Crystal Report Layout for Purchase Orders is giving me the following error:
    A subscript must be between 1 and the size of the array.
    Details: errorKind
    Error in File POR20002 {b89f97ad-bf1f-447b-8bb4-b3d2e5219269}
    {3C375C81-7D37-475D-9BCB-1703CE533B65}.rpt
    Error in formula N_Decimal_Places:
    '// To get the length of decimals
    A subscript must be between 1 and the size of the array.
    Details: errorKind
    I looked in the Crystal Reports Formula fields and could not find N_Decimal_Places.
    Has any one else had the problem with the PO layout that comes with Business One?  If so, how did you fix it?

    Couldn't find how to copy the PO layout over using copy express.
    I did compare the RDOC fields for POR20002 in both databases and they are Identical. 
    In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing.  Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places.  When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
    Again, SBODemoUS works correctly and AAA_TEST give the error.

  • Purchase Order Print Report Compilation Error

    Hi,
    While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
    identifier GET_PRECISION must be declared.
    Where as this is a seeded function inbuild in the Program Units.
    Also while compiling on server we get the error.
    Cannot convert rdf to rep.
    Thanks,
    Angelica.

    Couldn't find how to copy the PO layout over using copy express.
    I did compare the RDOC fields for POR20002 in both databases and they are Identical. 
    In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing.  Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places.  When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
    Again, SBODemoUS works correctly and AAA_TEST give the error.

  • Novated Purchase orders cannot be changed error

    Hi Experts,
        while trying to edit the PO we are getting an error as " Novated Purchase orders cannot be changed" . I am confused that which field is used to differentiate the normal PO to that of novated PO at portal level.  Please let us know why this error occurs and how can we solve the issue ?
       Thanks in Advance.
    Thanks & Regards,
    Aishwarya.M

    Hello Aishwarya ,
    A Novation is agreement of parties usually done in conjunction with an assignment where upon the assignment there is now a new agreement between the original party whose contract was assigned and the party to whom the contract was assigned that in effect extinguishes (cancels) the old agreement and relieves the assigning party of liability under the contract. 
    For example if A and B have a contract and there is an assignment and novation of that contract by B to C, the contract would now be between A and C and B would no longer be liable to A under the contract as the “novation” extinguishes their liability.
    If you wanted to prevent a novation you might include something like the following:
    “This contract shall be binding on the parties and their respective successors and permitted assigns. Except in the instance of an assignment or transfer by Buyer of all or any portion of this agreement, the assigning party shall remain liable for the performance of any assigned or transferred obligations hereunder.
    The requirements for a novation may vary by jurisdiction. For example in New York for there to be a novation it must specifically say it is a novation. In assignment consent letters Suppliers may try to create a novation by the words they use where the language in affect would say that Buyer may only look to the new entity going forward. Please check with the PO which supplier is being used and also check is there any third party involvement in that PO.
    Thanks
    Gaurav Gautam

  • Purchase order IDoc PORDCH generation error

    Hi all,
    I have made all the settings in the partner profiles to trigger PORDCH IDoc when I create or change purchase order through output message type.
    But the error it gives in WE05 is the following:
    The segment E1EDK01 does not occur at the current level of the basic type PORDCR01 (extension ).
    This error can have several reasons:
    The segment E1EDK01 is assigned to a group whose header segment does not occur.
    The segment E1EDK01 does not exist in the syntax description of the basic type PORDCR01 (extension ).
    The sequence of segments in the group in which the segment appears is incorrect.
    Previous errors ('mandatory' segment or group missing) may be due to this error.
    Since the generated IDoc is of ORDERS05 structure this is giving an error.
    Can anybody help me out with this.

    Jwalith
    It seems, you are using wrong Process Code/Inbound Function Module .... Create new process code or modify your Z-Process Code to link it to function module IDOC_INPUT_PORDCH, which is valid for Message Type PORDCH.
    This should solve the problem.
    Thanks
    Amol Lohade

  • Purchase order creation : internal pricing error

    Hi,
    While creating a purchase order, i am getting an error 'internal pricing error'. Message type : V1806
    This is basically for creating an Invoicing plan !
    Let me know in case of any clue.
    -Sachin D

    Hi
    is it this error
    Internal pricing error
    Message no. V1 806
    Diagnosis
    The program link between tables KOMT1 and XKOMV using the XKOMV-IX_KOMT1 field no longer works in the pricing program SAPLV61A. This could be because the PRICING_REFRESH function module has been called up from another function module, even though you did not require it.
    Procedure
    Inform SAP.

  • Matching invoice to Purchase Order with higher amount without warning

    Oracle Applications : 11.5.10.2
    PO was created via iProcurement with line type, service amount(The Value Basis is Amount). The order quantity is 100, unit price is 5, amount is 500
    I created a invoice in AP and try to match it to this PO from invoice workbench.
    In the Match to Purchase order Window, I changed the quanitity invoiced from 100 to 200, Amount updated to 1000 automatically. Then click the match button. There is a warning: This match will result in an overbill.
    But when I update the Match Amount from 500 to 1000, the unit price updated from 5 to 10. And system did NOT give me a warning notice.
    I know that Payables automatically calculates and enters the remaining field (Quantity Invoiced x Unit Price = Match Amount).
    but can someone tell me why system doesnot give a warning when I update the Match Amount? Is there any setup we can set to let system pop up warning?
    Thanks
    Kyla

    Thank you Gordon,
    However I cannot deny to the user that wants to apply that that there is a business case where the vendor demands the invoice to be paid all in front (maybe one installment with the Purchase Order and one with the Receipt of the Goods). So, I would expect this to be covered.
    I noticed another thing: When I opened the Down Payments screen on Invoice (where Down Payments are listed in order to choose them) there is a column "Open Net Amount" which brings the correct amount. However, in the column "Net Amount to Draw" there is a wrong figure and that makes the mistake.
    Now I can see that I can wright the correct amount to column "Net Amount to Draw" but still I cannot understand why a user should do that.

  • Link purchase order with request for quotation

    Hi:
    I would like to know is there any FM or table where I can get the request for quotation with the purchase order or viceversa?
    Any clue will be great.
    Points for helpfull answers.

    Check the below Links :
    http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/purchase%20ordering/file251/index.htm
    http://www.sap-img.com/materials/what-is-request-for-quotation.htm
    Check with table EKKO -EBELN (BSTYP = 'F',then this is purchase order )
    EKKO-ANGNR-> take this field ,this is quotation number
    Thanks
    Seshu

  • Purchase Order Integration Model Activation Error "Source Invalid"

    Hi Experts,
    When I try to activate Purchase Order CIF integration model for a specific plant, I am getting an error
    "SOURCE_INVALID" r                                    XC           014
    When I checked failed LUW, found one product which is Subcontracted.
    These a Subcon PO exist at this plant and Vendor is Subcon Vendor.
    Before IM activation, I have CIFed Subcon vendor and T-lane between Vendor to plant exists in APO.
    Any idea how can I resolve this issue?
    Thanks,
    Vipul

    Hi Vipul,
    I hope you have created subcontracting purchasing info record and connected with the productuon version.
    Secondly whether it is valid.
    A purchasing info record of the category subcontracting which documents the subcontractor as the source of supply of the end product.
    Regards
    Datta

  • Purchase Order - Release Startegies; Inconsistency error

    Dear all,
    I am changing our release startegy for the purchase orders. Therfore I added two characteristics:
    - Plant (Table EKKO and Field WERKS)
    - Material Number
    The problem is that I get the following error message:
    "Inconsistent characteristic value assignment"
    I only added the plant value so I do not understand why I get an inconsistency?!
    In the next step I also want to integrate the characteristic "materialnumber". Is it possible to define the value somehting like all values without 950*?
    Can anybody help me with this?
    Thank you very much.
    Best regards,
    Markus Sigl

    Dear Sasi,
    I checked the database and all parts of the strategy. There should be no inconsitency (all the codes. I still could not solve this problem, groups and so on should be ok).
    Have you got another idea?
    Thank you very much.
    Best regards,
    Markus
    Hi
    I think this may be because of inconsistency caused with tables. Kindly check all the tables related to release strategy and the entries.tables T16FK, T16FV, T16FS, T16FC and T16FG
    If you change any release strategy with fout following the sequence, the inconsistency in table will be created.
    Follow the sequence below for deletion or changes
    1. Delete the release strategies
    2. Delete the release indicators
    3. Delete the release codes
    4. Delete the release group
    5. Delete the class
    Hope this helps.
    Regards,
    Sasi

  • Purchase Order concurrent request printing with XML Publisher

    Need to use the standard Print Purchase Orders Report (Portrait) to print batches of purchase orders using the seeded XSL template that generates a PDF document. Used the white paper 295409.1 as a guide to create Data Definition and Template using the short name POXPRPOP, with seeded XML schema and XSL template. Changed POXPRPOP report output from text to XML.
    Report completes successfully but gives no data. The PDF is blank. Am I missing a step or is the seeded template not compatible with the POXPRPOP report?

    Did you check whether your Pasta is Setup Correctly?? check the pasta configuration required for XML Publisher there are couple of utils/libraries that need to be setup on the Concurrent Manager Node

  • EDI 860 - Purchase Order Change Request in SRM

    Hello All,
    I'm working on a problem involving the generation of the EDI 860 when a Purchase Order in changed in SRM.  If anyone is familiar with this functionality please contact me and I will have specific questions.
    Thank you,
    JR

    Hi,
    I wonder why would you want to do that. Any change to the PO is internal to your organisation till such a PO is ordered(approved). Once ordered you can anyways send the output to you vendor which would inform him of the changes.
    Regards
    Azad

  • Payment amount is more than Purchase Order Amount

    Dear FI Expert,
    We are getting the error "Payment amount is more than Purchase Order
    Amount" w hen a single payment through one check is being made against 2
    purchase orders.
    System is considering only the 1st purchase order and disallowing
    payment.
    For e.g. 2 Purchase Orders are created w ith 100% DP condition: First
    one
    for USD 200000 and second one for USD 100000.
    2 Dow n Payment requests are created through ME2DP against these 2
    Purchase Orders.
    At the time of making payment through F-48 by selecting both open items
    it takes the reference of only one Purchase Order and generates the
    error
    "Payment amount is more than Purchase Order Amount."
    Please suggest how entry w ill be made in such cases.
    Thanks
    Kamlesh Jangir

    Hi kamlesh,
    You are using EHP 4 or higher package. in this case you can use FPDP_CREATE instead of ME2DP.
    You can go through Business function LOG_MMFI_P2P
    https://websmp109.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_…
    Down Payment and Down Payment Request - Purchasing (MM-PUR) - SAP Library
    I hope this will be help full
    Regards
    Raheem

Maybe you are looking for