ME2J ALV View Disabled when Accessibilty_Mode Parameter is enabled

Hi People,
Has anyone encoutered the problem where when running ME2J - RM06EKPS (with the scope of list set to ALV) and having the accessibility mode user parameter set, the output is not actually in an ALV view but in a sap list. Disabling the accessibility_mode parameter returns this back to the expected behaviour (i.e. ALV view).
SAP_ABA     700     0019     SAPKA70019     Cross-Application Component
SAP_BASIS     700     0019     SAPKB70019     SAP Basis Component
SAP_AP     700     0017     SAPKNA7017     SAP Application Platform
SAP_APPL     603     0005     SAPKH60305     Logistics and Accounting
Kernel release    700
Compilation       NT 5.2 3790 Servic
Sup.Pkg lvl.      221
ABAP Load         1563
CUA load          30
Mode              opt
Rsyn file
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or
DBSL version       700.08
DBSL Patch Level   216
Thanks for any suggestions and/or comments. I have so far been unable to find a sap note that relates to this but I'm guessing there's probably one somewhere.
Dave

This is now resolved, the parameter ACCESSIBILITY_MODE was case sensitive, we had a lower case x, upon changing to upper case X the issue disappeared.

Similar Messages

System sleep settings become disabled when speech recognition is enabled. Is this by design?

System sleep settings become disabled when speech recognition is enabled. Is this by design?

randallto wrote:
There was another setting in bois I found that required scrolling in the bios screen. Tricky to find with no mouse.
I am not sure if some day these terminologies can be standardized so someone can follow very specific instructions rather than vague instructions that are further obfuscated with the use of technical acronyms.
That is the problem, that error message in VM is not explicit enough as to what steps to take to correct the problem. These bois screen authors decide arbitrarily to name settings as it relates to their world personally and there are not standards.
I still don't know how that got changed in the first place but that is not an issue with VM ware as to what else is changing the setting.
Do you have any explicit suggestions as to how the error message can be improved?

[fixed] Gedit plugins disable when I try to enable

I installed the gedit-plugins. However, when I try to enable one of the plugins it automaticly just shades out and I can't click it anymore.
It's like this
I just recently reinstalled my arch installation, and it's been a while since I installed this package. This time however, I decided to take a much more strict approach, so I have not installed a lot of "extra" stuff, like gnome-extra. Personally I think I am just missing some package, not sure though.
Edit:
I started gedit using a terminal and tried to enable it, got this error.
Traceback (most recent call last):
File "/usr/lib/gedit-2/plugins/terminal.py", line 29, in <module>
import gconf
ImportError: No module named gconf
** (gedit:7236): WARNING **: Cannot load Python plugin 'Embedded Terminal' since file 'terminal' cannot be read.
** (gedit:7236): WARNING **: Error activating plugin 'Embedded Terminal'
I actually had not installed gconf, but even after I installed it, same error.
FIXED: All I had to to was install gnome-python
Last edited by Canute (2008-05-10 05:27:43)

Flash Player is embedded in Internet Explorer 11 for Windows 8.x; see if anything in here helps: http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html

Facebook does not show anything and says that my JavaScript is disabled when i have it enabled

Facebook shows a blank page with no posts but just the top bar is there. Happens for all browsers in my computer.
== This happened ==
Just once or twice
== I redownloaded firefox when Facebook crashed on firefox.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

SAP Security audit log and Profile Parameter rsau/enable

Does the Profile Parameter rsau/enable have to ="1" for the audit log to be active or is this parameter set to purely allow the maintainance of static profiles. I have been reading into SAP's documentation and they only refer to this parameter in the "Maintaining Static Profiles" section. Therefore I would like to know if the audit log can record when the parameter rsau/enable = "0"?
Many thanks

Hi
I have it running on my NW2004s sneak peak system, whit a dynamic filter and the rsau/enable = 0. So Yes - it's possible to record in the secure audit log with rsau/enable = "0", if your using the dynamic filters
Regards
Morten Nielsen

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!

Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again..

Page is refreshing when changing parameter in sharepoint 2010 report viewer

Hi All,
I have uploaded a rdl file to sharepoint 2010 docuement library. When I click on this rdl file, it opens the report in a reportviewer.
I have 4 parameters year, month, country, location(its is dependent on country selection).
Now the issue is if I change year, month, and country it is refreshing entire page and displaying the following error message, but if I change location then no refresh is happening.
"Report parameter values must be specified before the report can be displayed. Choose parameter values in the parameters area and click the Apply button""
Any idea why it is refreshing the entire page when changing parameter value.
Thanks !
Soumya Das

Hi Soumya,
According to your description, my understanding is that you got an error when you used Report View.
Whether you used cascading parameter in the report. It seems to be by design if you used cascading parameter in the report.
As I am not an expert for reporting, I suggest you create a new thread on SSRS forum, more experts will assist you with this issue.
SSRS forum:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Or, you can open a ticket for this issue to confirm this issue.
Here are two similar threads, you can use as a reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingserviceshttps://social.msdn.microsoft.com/Forums/sqlserver/en-US/0979b6c1-b110-4ab9-9685-8382c8efbe3b/report-parameter-values-must-be-specified-before-the-report-can-be-displayed-choose-parameter?forum=sqlreportingservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/c161fab2-e573-41e5-bba6-dde4122a798f/report-refreshes-when-it-shouldnt?forum=sqlreportingservices
Best Regards
Lisa Chen

My Yahoo and Norton toolbars were disabled when I updated today and they did not reset. They no longer appear in the drop down view menu. How do I reset them?

I was asked to update my Firefox today. The prompts said the yahoo and norton toolbars would be disabled during the update and ENABLED after. They did not reset and do not appear in view drop down menu. How to I reset the toolbars? I am a novice user please be as simple as possible.

Add-ons are Disabled after Updating Firefox
* https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
Check and tell if its working.

ALV GRID DISPLAY and a Parameter entry in the same screen how ?

Hi,
I am newbie to ABAP and I am trying to figure out ways to display an ALV grid along with the parameter field into which the user enters his/ her values in the same screen.To be clear, when I have a parameter type specified, my screen just lets me display that one field into which the user is asked to enter a value but I want to display the table as well as the user input field in the same screen.
Any help would be appreciated.
Thanks a lot. I appreciate that.
-V

Hi,
I think the easiest way to do that is by means of docking container . I will assume you are using selection-screen, but you can also achieve that with normal screen.
- first you need to place your field in selection screen which I believe you already have
- now during AT SELECTION-SCREEN OUTPUT you check if something is entred to that field
- if so you create instance of docking container (docking it at left hand side) then inside you place you alv with selected data for that field value
So the code which fulfils that would be
PARAMETERS pa_carr TYPE scarr-carrid.
DATA: gr_dock_cont TYPE REF TO cl_gui_docking_container,
      gr_alv       TYPE REF TO cl_gui_alv_grid.
DATA: it_spfli     TYPE TABLE OF spfli.
AT SELECTION-SCREEN OUTPUT.
IF pa_carr IS NOT INITIAL.
    SELECT * FROM spfli INTO TABLE it_spfli UP TO 10 ROWS
                                            WHERE carrid = pa_carr .
    IF gr_dock_cont IS NOT BOUND.
      CREATE OBJECT gr_dock_cont
        EXPORTING
          side                        = cl_gui_docking_container=>dock_at_left
          extension                   = 500.
      CREATE OBJECT gr_alv
        EXPORTING
          i_parent          = gr_dock_cont.
      CALL METHOD gr_alv->set_table_for_first_display
        EXPORTING
          i_structure_name = 'SPFLI'
        CHANGING
          it_outtab        = it_spfli.
    ELSE.
      CALL METHOD gr_alv->refresh_table_display.
    ENDIF.
ENDIF.
Regards
Marcin

Protected View - disable

There seems to be a discrepancy between Adobe Customization Wizard XI and the actual preferences in Reader after it is installed. I used the Wizard to create an .mst for the Reader installation. In one section I checked OFF for Protected view. When I installed it, the Preferences in Reader show Sandbox Protections and a box for Enable Protected Mode at Startup. This box is checked. Under that is Protected view and off is selected but it is grayed since the Enable Protected Mode at startup is checked.
I don't want protected mode running but I don't see how to fix that in my installation package. The wording in the Wizard doesn't match the actual preferences.
Thanks.
Jane

Yes I know I was in protected view. It's pretty obvious when you're in there. I even turned off DEP just to make sure it wasn't intefering. Just for your edification I've included links to three screenshots. One showing protected
view, COMPLETELY turned off, followed by a screenshot of a file being BLOCKED by PROTECTED VIEW, then followed up with what shows on the details page.
http://www.visionsrealm.us/images/proview/ProtectedView.jpg
http://www.visionsrealm.us/images/proview/ProtectedView2.jpg
http://www.visionsrealm.us/images/proview/ProtectedView3.jpg
Before you ask I have saved the file from my email to a folder within my documents. So not only was it removed from email, to prevent the issue of opening in protected view because it was from Outlook. But I also made sure that it was in a trusted
location.
Now tell me, if it is COMPLETELY turned off, why is my file being BLOCKED?
Like my question said before, where else do I need to go to COMPLETELY disable protected view.

Checkbox in ALV is disabled ?

Hi All,
I am displaying a checkbox in an ALV. While creating the fieldcat I have marked the following :-
- checkbox = 'X'
- edit = 'X'
But, the checkbox is somehow displayed as non-editable(disabled).
How do I enable the checkbox ?
Regards,
Ashish

Hi...
If you have not manually disabled the input... then i think its because of the SAP GUI version........
If you are having an older one.. you might have this problem.. we too faced a similar problem...when we were using SAP GUI version 640... which got resolved after we upgraded to version 710
Cheers.....

I keep getting the message your apple Id is disabled when I try to download something I have already changed my password

I keep getting message your apple I'd is disabled when I try to download anything, I have changed the password and it still does this what do I do? By the way how do I know which os I am using? Thanks

I take it that this is on an Ipad. I had just about the same problem, you could reset your password, but then again, you must apply the new password in the ITune's Store. Tap settings, "about" to check your firmware. Also to set the new password for the Store, tap Settings, Store, then tap Apple ID: a small pop up will show, here tap View Apple ID and input your new password.

Sometimes I can't get out of Day view in iCal. There is no where on the screen to select month view, even when I close it out and go back into iCal.

Sometimes I am locked in "day" view in iCal. There is no where on the screen to choose "month" view, even when I close it out and open again. Tapping anywhere on the screen or scrolling doesn't help.

Give this a try:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try full screen again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Problem with Css styles not showing in live view or when i browse

I am using Mac osx 10.6 and building website with Dreamweaver CS5. Sometimes div tags i create not showing styles or rendering in live view or when I browse but showing in design view. I looked in dreamwever faq and they talk about not showing in design view to toggle the display styles. That is not the problem becuase it is check marked and I tried turning off and turning on and made no difference.I am using firefox browser.
It happened before the other day too. But all of my other pages in this site that i have created the same way building with div tags and css styles. So not sure what the problem is. Maybe someone has a suggestion here.
Johanna

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Portfolio</title>
<style type="text/css"></style>
<link href="css/jbstyles.css" rel="stylesheet" type="text/css" />
<style type="text/css"></style>
</head>
<body>
<div id="wrapper">
<div id="mainnav">
    <div id="navbar">
      <ul>
        <li><a href="index.html"><br />
        </a></li>
<li>
          <ul>
            <li><a href="index.html">          Home</a><a href="about.html">About</a></li>
            <li><a href="portfolio.html">Portfolio</a><a href="contact.html">Contact</a></li>
          </ul>
        </li>
      </ul>
</div>
    <div id="contentinside">
      <div id="navbar2">
        <ul>
          <li><a href="design.html">Design</a></li>
          <li><a href="multimedia.html">Multimedia</a></li>
          <li><a href="webdesign.html">Web Design</a></li>
        </ul>
      </div>
      <div id="mm1thumb">Content for id "mm1thumb" Goes Here</div>
      <div id="mm2thumb">Content for id "mm2thumb" Goes Here</div>
    </div>
    <img src="images/multimsidebar.gif" width="212" height="615" alt="mmsdbr" longdesc="http://multimsidebar" />
<div id="footer">
    <p> </p>
    <p>Johanna Bresnahan</p>
    <p>Web & Graphic Design - http://www.johannabresnahan.com</p>
    <p> email: [email protected] ....phone....857•991•5717<br />
</p>
</div>
</div>
</div>
</body>
</html>
Here is the html code above. not sure how to attach my file so get a visual. This is the first time I have used this forum.
Johanna

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

ME2J ALV View Disabled when Accessibilty_Mode Parameter is enabled

Similar Messages

Maybe you are looking for