ME2K - Multiple Asset selection

Hi All,
I need a report of Purchase order value (Total Value of P.O) based on Asset number.
When I run ME2k I get a breakdown of line item values.
But I need the total value of the P.O. currently system is displaying the net price of line item. I know I can download to excel and manipulate the report to give me the total.
I have 100 assets and each assets contains more than 200 line items. So it will be a time consuming process.
But in ME2K initial screen, Multiple selection of Asset is not possible.
I also tried with structures/tables to get report.But it went in vain.
Is there any possibilites to get the purchase order values(total value) for multiple assets???
Thanks in advance for your help.
Regards
Senthil Kumar

Hi All,
Thank you very much for prompt and quick reply.
your reply is very userful for me.
I still have problem in calculating the P.O total. If I have selected total and sub total value.
but system is calculating only the net price. For ex. in a P.O there are 3 line items and net price for each line time is 100 and quantity in each line item is 3. Now the total value of the P.O is 3 ( quantity) X 3 ( line item) X 100 ( net price) = 900. But currently system is showing 300. Its not calculating as per the quantity of the P.O.
Any other way is there?
Regards
Senthil

Similar Messages

Multiple asset numbers in Single PR/ PO line item

Hello,
If we enter multiple Asset Numbers in single PR/ PO line item then we get following error message while doing GR -
' Entry 7100000256 00001 not in table XACCOUNTING (system error) '
Message no. M7000
For this PO, in account assignment we have selected 'Distribution' as 'Distribution on quantity basis' and 'Partial Inv' as 'Distribute to following row'
In case of procurement of materials like chair, we are procuring few hundred materials and for each chair we are creating one asset number.
Please help to resolve.
Regards,
Milind Dumbre
Edited by: Milind Dumbre on Feb 2, 2011 3:24 PM

Hello,
Check these SAP notes 1386249, 1550451 is relevant for you. These notes are applicable for your system. these notes are non industry specific.
You can try these note , i think your problem may get resolve.
Regards
Mahesh Naik

Multiple Assets in a Purchase Order

Hi All
If a line item has been created in a purchase order with a multiple asset number, when i want to goods receipt the same order how do i make sure that the system allow me to receipt the specific asset number.
Regards

Hi,
System will not distrubute any qty or amount during GR as well as system will not generate any accounting document also after GR in the case of multiple account assignment.
System will distrubute the quantity and value during IR based on the option you selected during the creation of PO. As well as system will generate accounting document during IR.
Regards
Karthick

RE: Multiple asset posting with different dates

Hello can we post and transfer multiple asset codes with different posting dates to different asset in one single transaction i have use ABUMN with multiple selection but it is not provide to use different posting date for different asset codes.
Regards
Abhisekh Mandal

ABUMN is supporting multiple assets but not multiple dates. Post twice with two different dates.
Srinivas

Checkout Multiple Assets

Does anyone know if it is possible to checkout multiple assets at once? The second I select more than one asset, the checkout button goes gray.
Thanks.

This is current limitation of FCSvr 1.1.1

Changing status for multiple assets

Hi,
After a quick search I cant find anything that relates to my question.
I want to be able to quickly assign a status to multiple assets while in list view.
Is this possible ?
The only way I can see to do it at the moment is to individually open each asset and then navigate to the 'review and approve' tab and then change the stauts ---much too slow and tedious.
Thanks,
Dan

It's not possible with any single built-in command.
But one way to do it is set up a Response that is triggered by a Subscription:
+ Create a Response to Set Asset Metadata to the status you want.
+ Then create a Subscription to an Asset, triggered on Analyzed and Modified, calling your Response--but don't create any Asset Filter.
Now you can select a group of assets, Analyze them, and they will get their metadata reset to what you have configured in the Response.
Some considerations:
+ Make sure other people aren't analyzing assets at the same time, since you didn't put in any restrictions. For the same reason, you will probably want to disable the Subscription after you are done, or else in the future some people might get confused why their status is changing unexpectedly when they analyze an asset.
+ If you have multiple pages of assets you want to change, you may have to do it several times or enter a search term to make it easier to find them. If you're talking about changing hundreds or thousands of assets, you might want to consider doing it with an external script instead.
+ You could add an extra measure of safety by adding an Asset Filter if you know in advance what some of the metadata will have to be. (But don't set Trigger if changed.)
+ Don't analyze assets in the List view--it will lock up your FCSvr session.

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

ABUMN using multiple assets

Hi experts,
I am trying to process transaction ABUMN for about 100 assets. When I click on the multiple assets button, only six lines appear. The clipboard functionality does not appear to work. The clipboard icon is greyed out.
Does anyone know how to make the clipboard function work for this transaction so that I can cut and past all 100 assets in the transaction? Or is there a better way to do this?
Thanks.

Hi Karen,
I did the testing and what i understand that we need to paste 6 assets enter and scroll down paste another six assets and like that you need to post all assets.
Then simulate it, you can see all asset values at a time.
Still if you get any issues, pl let me know.
Regards,
Venkata Raju

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

JTree multiple nodes selection problem !

I can not make my JTree to be in multiple node selection mode.
I have custom tree model and tree node class, the tree model class
implements javax.swing.tree.TreeModel, and the tree node is an ordinary
Java object.
In this setting, my JTree is always in single selection mode.
I have tried set the selection model after the JTree has initialized, and
it didn't work.
What I missed in TreeModel implementation ? Or should my tree node class
also implements javax.swing.tree.TreeNode ?
Don't tell me just call
xxtree.getSelectionModel().setSelectionMode(javax.swing.tree.TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
It didn't work.

Just in case anyone wants to know, I did find the magic number of files, and what the problem is. I talked with tech suppot at Adobe, and they know the problem exists, but won't fix it. I did put in a request in the "Request a Feature" form. Read on:
The magic number is 40 Canon 1Ds Mark III Raw files, and clicking on three or more keywords. The key to not having the numbers of keywords counted incorrectly in the filter pane is to click on the keywords as fast as you can before it starts to write to the metadata. If you click on each keyword one at a time, and wait about a second or more between selecting the keywords, then the counts in the filter panel for the number of keywords is not correct in relation to the number of files that you have chosen to apply keywords to. The cure for this is to click as many keywords as possible as fast as you can before the software starts incorporating the keywords into the metadata.
I would suggest to Adobe, that a nice feature would be that one could click on as many keywords as one would want, to as many files one would want, and then have a button or icon that would enable one to then apply all the keywords at once, instead of applying them as you click them as it is now. I also would love it if Adobe fixed it now instead of waiting to fix it in the version of CS5. Someone on Adobe's support line told me that Adobe would rather wait to put this into the CS5 version than fix it now. I don't think that is right, but heck, I am only one guy who depends on this software to provide images keyworded to my clients in a timely manner. I would never run my business like this Adobe. If there is a problem, and there is, please fix it now, or give me some of my money back since your product has a design flaw that is having a negative impact in my ability to to my job and run my business.
Thanks!
Daniel Root
Portland, OR

Cannot have multiple items selected in a DropDownList when edit the forum in sharepoint

hi ,
i have custom forum for new and edit, in new forum we have controls drop down values, when select drop down1 values that related values are displayed in dropdown2 , when edit item that time we getting error
Cannot have multiple items selected in a DropDownList.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Cannot have multiple items selected in a DropDownList.
Source Error:
HttpException (0x80004005): Cannot have multiple items selected in a DropDownList.]
System.Web.UI.WebControls.DropDownList.VerifyMultiSelect() +124
System.Web.UI.WebControls.ListControl.RenderContents(HtmlTextWriter writer) +10956501
System.Web.UI.WebControls.WebControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.WebControls.WebControl.RenderContents(HtmlTextWriter writer) +13
System.Web.UI.WebControls.WebControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
ASP._controltemplates_amat_appayrequest_webparts_appayrequest_appayrequestusercontrol_ascx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\CONTROLTEMPLATES\AMAT.APPayRequest.Webparts\APPayRequest\APPayRequestUserControl.ascx:350
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253
System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87
System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240

Hello,
Could you please share your code with us? Also explain how you are binding DDL.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

ALV Grid multiple row selection, disabling some

Does anyone know if it is possible to have an ALV grid with multiple row selection allowed but for some rows the row selection is disabled?
Kind regards,
John.

Hi John,
You can add a check box and select multiple rows. I am using the same technique. I have used OO.
a) Use Even handler "Double Click"
b)Using "SELECT_ALL_ENTRIES CHANGING PT_OUTTAB TYPE STANDARD TABLE" and I am sorting based Check box selection.
Need more help please let me know. I will send you the code.
Lanka
Message was edited by: Lanka Murthy

F-44 ZBAPI MULTIPLE LINE SELECTIONS FOR WEB SERVICES

HI TO ALL,
I HAVE WRITTEN ZBAPI FOR POSTING MULTIPLE LINE SELECTIONS FOR TCODE F-44, THE ZBAPI CONSIST OF BDC PROGRAM, WHICH IS WORKING IN SAP SYSTEM PERFECTLY BUT WHEN I AM USING IT IN WEB SERVICES IT IS THROWING A ERROR MESSAGE.
PLEASE CAN ANY ONE TELL ME DOES THIS PROCESS WILL WORK OR NOT, IF YES HOW IS IT POSSIBLE

Hi Gabriel,
Let me try to answer some of your questions:
1) The "Requires Secure Access" attribute of a resource handler controls whether this handler must be accessed/consumed only over SSL (HTTPS). Oracle Database Cloud Schema Service is only offered over SSL, so this attribute does not have any effect on RESTful services deployed in this environment (because secure access is always required and there is no other way). That said, if you want to access such web service from your own APEX instance, your instance must have Oracle Wallet configured with appropriate SSL certificate.
2) The URI parameters are not required. If your web service returns data for many entities (for example, list of employees in employees/), you may not need a parameter. If your web service returns data for one specific entity (for example, details of one employee in employees/{id}), you may want to identify that entity with a URI parameter.
3) You can have many URI parameters, for example: customers/{id}/orders/{order_id}.
4) Yes, these are the same HTTP methods/verbs you would use from PHP.
5) If you are trying this POST example from your own APEX instance (not Oracle Database Cloud Schema Service) and you are trying to access a web service over SSL, then it is likely that the Oracle Wallet used by your instance does not include the required SSL certificate(s), or the Oracle Wallet is not configured at all.
6) I recommend to check RESTful Web Services for the Oracle Database Cloud white paper and Oracle REST Data Services Developers Guide. Oracle REST Data Services is the technology that enables RESTful services in the Oracle Database Cloud Schema Service.
You can certainly create your own web services in the Oracle Database Cloud Schema Service and consume them from the same environment.
Vlad

Multiple Assets transfer in ABUMN

Hi All,
I need to transfer 1 asset to multiple assets (eg 20 assets equally) within same comapany code. I tried thru T code ABUMN by choosing option "multiple assets".
There, under "From asset" i gave the same asset number 2 times, one below the other and in "To assets" I gave 2 different assets. When i hit enter, the second line item gets deleted, making 1 asset transfer to 1 asset.
Could anyone let me know whether its possible to transfer 1 asset to multiple assets in ABUMN or any other way.
Thanks,
Ameet

Hi,
This can be done through ABUMN only, but not ata time. for example:
You have to post 3 transactions individually to that old asset.
For the first ABUMN transaction choode partial transfer and choose amount specification.
For the second ABUMN transaction choode partial transfer and choose amount specification.
For the last ABUMN transaction choose Complete retiremnet. (So the balancewill be transfered to the third new asset)
Please check.
JK

ME2K - Multiple Asset selection

Similar Messages

Maybe you are looking for