ME2L screen change after version upgrade.

Hi All,
We are currently going through a version upgrade.( ECC 5.0 to ECC 6.0; AFS 5.0 to AFS 6.5) In ME2L report I can't see the descriptions of below fields.
AFS_SIZE
AFS_SCAT
In old version I can see the descriptions.
AFS Dimension
AFS Stock Category
What can be the reason? Please advice.
Regards,
Jeewana

It could be that you modified the data type yourself and with the SPAU it is now reset to the standard and again without proper labels.
check in SE11, enter your AFS_SIZE into the data type field, move the radio button as well to that field, then click display and goto the lfield label tab.
Are there all 4 field labels defined in your language?
if not check via Menu Utilities > Versions if you got a new version with the upgrade.

Similar Messages

N96 Home screen changed after firmware upgrade

I just updated my N96 fimware and now my home screen top bar shows different icons, the last two now show icons for downloaded applications. What settings have changed and how do I change back to my original icons.

Hi there.
The firmware upgrade does reset a few settings. It is easy to change things though....
Click on Tools > Settings > General > Personalisation > Standby Mode > Shortcuts
You can then change the shortcuts to whatever you want.
Hope that helps.....
There are 10 types of people in the world. Those who understand binary and those who don't.

SAP Query selection screen issues after ECC upgrade

Hi all
We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
All the fields required are available.
However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
Can anyone help identify the issue so that the issue can be resolved?
Thanks
Vinodh S

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

Screen changes during an upgrade

Hi,
Is there any way we can find out the obsolete screens and the screen changes from lower version to higher version during an upgrade.
Thank You.
Regards,
Soumya

Hi
While doing Upgrade You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
and some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
check this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Hope this will help you
Regards
Kiran

Process Chain behavior changed after SP upgrade

Hi all, we've recently updated SP from SAP_BW 700, SAPKW70016 to SAPKW70021.
We realized about a particular process chain behavior:
We have many process chains configured to execute the next step "Always" (whatever it happens with the previous process).
This is the situation which changed:
BEFORE the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
AFTER the upgrade:
If error raises on a process, this one remains "red" but the subsequent processes continues.
Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
The remaining processes are executed once again (a new branch is generated). <- This is different
I want the "BEFORE the upgrade" behavior to keep working as always.
Do you know if there's some OSS note or tips of configs available to set this as my needs? (we have found the OSS Note 1398868 and implemented it, but the "effect" is not as we should expect for this case in particular).
I hope you can help. Thanks in advance and best regards,
Bernardo

I've found the OSS note: Note 1473491 - Chain not continued with termination and "ALWAYS" link; delivered with "SAPKW70025" corrections. It seems to be solving the issue I've originally mentioned. I'll perform some tests on this and update.
Regards,
Bernardo

What makes my screen change after going to sleep?

I have os10.9.2 and since I installed it 6 weeks ago my screen changes sizes after it wakes up. I have a mac mini.

At the bottom of your thing it says you are using 10.7.1. Is this correct? If so, run Software Update first, and see where that takes ya. From there, if you are still having issues with the black screen, try opening Disk Utility, and hit Verify Disk. If this comes up with errors, re-start your computer holding the Option button down, from there, select Recovery Disk as your start up disk. You will be able to locate Disk Utility in there, and you can Repair Disk from there.
If it does repair disk successfully, that could be part of the problem. If that doesn't work, follow the steps in this article to reset PRAM/NVRAM http://support.apple.com/kb/ht1379
Even still, if that doesn't seem to correct the problem, i would back up everything on your computer to an external harddrive, erase, and re-install 10.6, run Software Update a few times, check the app store for the digital download of Lion....you should not need to "buy" this again, it should see it in the purchased section..
Update again with Software Update when you get the successful re-installation of Lion. I'm not 100% positive with the whole re-installation steps, if it walks you through going through the Migration Assistant or not, but even if it doesn't, that's okay. You can still locate Migration Assistant via the Utilities folder and bring back all your Time Machine stuff again.
Still if you want to dig even deeper to see if there is a problem with your hardware, you can run Apple Hardware Test. Check this article for steps...http://support.apple.com/kb/HT1509

System Number in License screen changed after system copy

I have completed a Homogeneous system copy from GTP (Global Trade Production) to GTQ (Global Trade QAS). After the copy the system number in the SLICENSE screen changed from the original number when I first created GTQ to the system number listed in GTP. Now my permanent license key for GTQ will not work because the system number is different. Is there a way to change that system number so the License key will install?
Thanks
David

No. Thats not possible.
You need to update the info and request a new license at SAP Service Marketplace and install it on your system.
Regards
Juan
Please reward with points if helpful

Excel layout changed after EHP5 upgrade from EHP4.

Hi All,
We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
This is affected us as we have lot of macros enable for the excel files.
Request you all to help. Is there any sapnote, anyway we can resolved this issue.
Thanks

Hi Markus,
Thanks for reply.
I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
New Format Example
Production plan
Description                        Material                               Sales doc.
IRB 2600 M2004                 3HAC020536-018              104861
IRB 2600 M2004                 3HAC020536-018              2BT0615486
OLD Format
Production plan
                                      Description                    Material                               Sales doc.
                                      IRB 2600 M2004            3HAC020536-018               104861
                                      IRB 2600 M2004            3HAC020536-018               2BT0615486
Hope this above will help to make it clear.
After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
Thanks
Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

How do I Change the Name of My MacBook and Why was it Changed after the Upgrade to Yosemite?

Hi everyone,
I upgraded my MacBook Air (2012) to Yosemite a few months back and it changed the name of my Mac from "Alan's MacBook" to "Alan MacBook Air (2)." I simply want to know how to change it back to the original name. Also, why was it changed in the first place after my upgrade to Yosemite?
Thank you so much!!!
Alan

Professor AR wrote:
Also, why was it changed in the first place after my upgrade to Yosemite?
This was a common bug in Yosemite. Follow dwb's instructions but also restart your router. Make sure you're running OS X 10.10.2 since it was supposed to have been addressed with that update.
I have heard allegations regarding simultaneous use of both Wi-Fi and Ethernet (or equivalent adapter, considering it's a MBA) but can find no justification for them, and I never personally observed any correlation to it. It's perfectly acceptable to use both.

Changes after firmware upgrade in nokia 3250

hi i have nokia 3250 and want to are there any changes after upgrading firmware beacuse before i owned nokia 6270 and after upgrading firmware the music volume on my headset became very low and i dont want same wit my 3250

yeah, the N80 has a history of being buggy. Even with the latest firmware. Its a shame, because it was a damn good phone. Anyhow
You can download Yahoo!Go from:
http://uk.mobile.yahoo.com/go
Not sure about the others. (My operator, Three, offers Yahoo Messenger and Yahoo Go to its customers, but they "are incompatible with the N80" if you can believe that.)
Anyhow..
Currently using E71, looking at options

Completely unsolvable: Cannot change screen brightness after I upgraded my ThinkPad's display.

I have a ThinkPad X240 which came with a 1366x768 TN panel, I hated it and so after a while I upgraded it to an IPS 1080p display. It works great and looks fantastic except it's stuck on max brightness inside of Windows 8.1. I cannot change the brightness inside of Intel HD graphics settings or inside of programs like Display Tuner. It doesn't work in Windows 10 either. The weird thing is, I can change the brightness just fine inside of Ubuntu. I've tried uninstalling the Intel HD drivers and reinstalling them, I've tried switching the drivers to the Microsoft Basic Display Adapter, and none has worked. I feel like I've installed every single version of Intel's Graphics Drivers and that I've done everything and it still won't change the bloody brightness. NOTHING has worked except to just use Ubuntu, which is not an adequate solution. I've even gone as far as to update my BIOS and reset it to defaults, I've even pulled the CMOS battery. I've tried the version of the Intel HD driver from Lenovo for the X240 and I've installed the monitor.ini files. I've also just learned that during the Windows Boot Logo, the FN keys WILL change the brightness, but as soon as Windows is done booting, it stops working. This, coupled with the fact that brightness control works in Ubuntu means that this must be something related to Windows right? Brightness control works in BIOS. I've even gone so far as to try and change the brightness through CMD using powercfg according to this post. http://superuser.com/questions/472081/can-i-force-a-greater-screen-brightness-from-windows-command-prompt I'm really starting to lose patience now as it has been like this for 3 weeks and I can't be using Ubuntu all of the time, I honestly do not know what to do, it seems like this problem is completely unsolvable. Edit: I even got so frustrated that I switched off the laptop, installed the old screen, booted up Windows, and the brightness worked. Then (I know this is a bad idea) WHILE IT WAS ON, I pulled the old display and put connected the new one. And lo and behold, the brightness **bleep**ING worked in windows on the new display.

try change drivers
Moderator comment: Post edited to conform with the Community Rules guidelines.
"No posts or signatures with intent to promote or advertise
Any way of personal blogs/ websites/ pages/ affiliated websites/ resources are not allowed."

Screen blinking after system upgrade

Hi!. Last evening I made a system upgrade (-Syu), this morning I've turned the pc on and I've discovered my screen was blinking, the problem starts when grub finishs and starts Arch. I've searching in the forum but I didn't find anything. The problem is solved partialy when the screen resolution is changed to 1280*960 (the original is 1280*1024), at this resolution, the blinking dissapears.
My graphic card is a Sapphire Radeon HD 6570, the driver I have ever used is xf86-video-ati.
[victor@LinuxPC ~]$ dmesg | egrep 'drm|radeon'
[ 5.863001] [drm] Initialized drm 1.1.0 20060810
[ 6.205599] [drm] radeon kernel modesetting enabled.
[ 6.205680] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 6.206398] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759 0x174B:0xE193).
[ 6.206444] [drm] register mmio base: 0xCFFC0000
[ 6.206447] [drm] register mmio size: 131072
[ 6.208061] radeon 0000:04:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 6.208065] radeon 0000:04:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 6.208069] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 6.208071] [drm] RAM width 128bits DDR
[ 6.208312] [drm] radeon: 2048M of VRAM memory ready
[ 6.208315] [drm] radeon: 1024M of GTT memory ready.
[ 6.208334] [drm] Loading TURKS Microcode
[ 6.463365] [drm] Internal thermal controller with fan control
[ 6.464395] [drm] radeon: power management initialized
[ 6.615141] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 6.634782] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 6.634913] radeon 0000:04:00.0: WB enabled
[ 6.634919] radeon 0000:04:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880075688c00
[ 6.634924] radeon 0000:04:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880075688c0c
[ 6.635818] radeon 0000:04:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90007032118
[ 6.635821] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.635823] [drm] Driver supports precise vblank timestamp query.
[ 6.635854] radeon 0000:04:00.0: irq 46 for MSI/MSI-X
[ 6.635875] radeon 0000:04:00.0: radeon: using MSI.
[ 6.635915] [drm] radeon: irq initialized.
[ 6.653036] [drm] ring test on 0 succeeded in 1 usecs
[ 6.653097] [drm] ring test on 3 succeeded in 1 usecs
[ 6.842083] [drm] ring test on 5 succeeded in 1 usecs
[ 6.842092] [drm] UVD initialized successfully.
[ 6.842272] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.842303] [drm] ib test on ring 3 succeeded in 0 usecs
[ 6.993949] [drm] ib test on ring 5 succeeded
[ 6.994555] [drm] Radeon Display Connectors
[ 6.994559] [drm] Connector 0:
[ 6.994562] [drm] HDMI-A-1
[ 6.994564] [drm] HPD4
[ 6.994567] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 6.994569] [drm] Encoders:
[ 6.994572] [drm] DFP1: INTERNAL_UNIPHY2
[ 6.994574] [drm] Connector 1:
[ 6.994576] [drm] DVI-D-1
[ 6.994578] [drm] HPD1
[ 6.994581] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 6.994583] [drm] Encoders:
[ 6.994585] [drm] DFP2: INTERNAL_UNIPHY
[ 6.994586] [drm] Connector 2:
[ 6.994588] [drm] VGA-1
[ 6.994591] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.994593] [drm] Encoders:
[ 6.994595] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.031444] [drm] fb mappable at 0xD0474000
[ 7.031447] [drm] vram apper at 0xD0000000
[ 7.031449] [drm] size 5242880
[ 7.031451] [drm] fb depth is 24
[ 7.031453] [drm] pitch is 5120
[ 7.031545] fbcon: radeondrmfb (fb0) is primary device
[ 7.260059] radeon 0000:04:00.0: fb0: radeondrmfb frame buffer device
[ 7.260063] radeon 0000:04:00.0: registered panic notifier
[ 7.260072] [drm] Initialized radeon 2.37.0 20080528 for 0000:04:00.0 on minor 0
Anyone knows what's happening?
Thanks

Hello everyone!
After upgrading to kernel 3.14.1-1, I suffered from the problem of screen flashing rapidly when I booted into the Arch Linux.
Problem Description
As we know, when the kernel boots from the grub, it firstly enters a text model where the resolution of the screen is low. At this stage, "Welcome to Arch Linux!" is printed on the screen. And then it loads some kernel modules and the video display becomes normal with a correct resolution supported by the monitor. If Xorg is not installed, it will stay at a command promt asking for user name and password. The above is a normal kernel booting process. Here the problem is:
When my Arch Linux kernel tries to change from the model with low resolution of the screen to a normal video model, it fails. After loading the video card driver, the screen flash once and I can see the kernel change the resolution of the screen correctly, but the whole screen begin flashing rapidly. The screen flash makes me feel very dizzy. At the same time the position of the screen display is also wrong. The screen splits into two part: the right part of the screen should be on the left while the left part of the screen should be on the right side. Each long line of text is splited into two non-continuous fragments.
After downgrading to the linux kernel 3.12.9-2, all the problems disappear. It should be the problem from kernel 3.14.1 I think since the problem begins when I upgrade my kernel to that version.
System info
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Platform: x86_64
kernel version: 3.14.1-1 from core.
GPU model: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Caicos PRO [Radeon HD 7450] [1002:677b]
GPU driver:xf86-video-ati(for Xorg). I did not use the Catalyst driver.
Thank you very much!

Evaluation Path Results change after ECC6 Upgrade

Hi All,
We have upgraded to ECC6 up to and including our QA environment. We are running an old java version of the MSS team viewer. We have a custom evaluation path, a modified version of SAP_MANG (Z_MANG) that we have been using for years. After upgrade any view that involves an organization is showing duplicates...
Example of output
Organization 1
Person 1
Person 2
Organization 1
Person 1
Person 2
Our Z_MANG Evaluation Path looks like this...
No     Obj. Typ.     A/B     Relat     Relat Name      Priority     Relat Obj Typ     Skip
10      *                 B         008       Holder              *               S                        X
20      S                A         012       Manages...      *               O
21      S                A         Z01      Salary Budg     *               *
22      S                A         Z02      HR Manages    *               *
30      US             A          208      Is Identical to    *               *                         X
Only when we skip No 21 Salary Budg is the problem resolved. Has anyone run into problems after upgrade to ECC60 that the results for an exting evaluation path have changed like this?
Thanks,
Doug

>
Doug Steckel wrote:
> Hi Ranganath,
>
> Thanks for the quick reply. Yes the Skip flag is set on relationships 10 and 30. I would also think that would prevent this but it is not.
>
> Thanks,
> Doug
not all relationships represent physical data records in the database. some are derived and without looking at the system, I believe the US 208 to P is a derived relationship.
Are you sure all the users you are testing with have a proper sy-uname setup for all respective pernrs in PA0105?

Profile Parameter changes after RAM Upgrade?

Hi,
We are using SAP ECC 6.0 on AIX 5.3 and IBM p595 seriers
Now we have upgrade the Physical memory (RAM) from 8 GB to 16 GB.
After Upgrading/Degrading the Physical memory (RAM) from the Server,What manual Changes has to be done for Profile parameter.Please provide the details.
Cheers
Deepu

Hi ,
After Changing the RAM in SAP System ..
1) Increase the No of Work Processes , If Required
2) Increase the size of Memory Areas ( Size of Extended Memory) , If you face any Memory Dumps
3) Increase the SAP Buffer Sizes ( Program Buffer etc.) to have better performance.
But it is not compulsary that you should change these parameters but changing these Paramters Values will improve performance of SYstem
Thanks
Deepak Gosain

WPC HTML editor rendering changed after SPS21 upgrade

Hello experts,
We've just upgraded our SAP Portal to SPS21. This upgrade included KMC. Since the upgrade the fontsizing of content types has changed. Everything has become so small, content cannot be properly read. I'm trying to narrow down the problem and found out the following:
- It only happens when existing content (pre upgrade content) get saved. Before saving the font size is good, but after saving it changes.
- It only happens to content which is being edited in the HTML edit object of WPC.
I was surprised it only happens to existing content and not to new content. Using the IE Developer toolbar I tried finding out the difference in HTML. This is what I found:
- Existing content is only rendered by the XSL. The XSL defines the content to be viewed in a paragraph tag. This is exactly the output of the HTML
- New content (same content type) is rendered by the XSL, but has "extra" rendering: Text is shown in two SPAN tags <span> with extra class attributes urFontStd and urTxtStd.
I don't know enough about WPC to know why it renders in two different ways if the same xsl file is used for the content. I hope someone can help me solve this problem.
Thanks in advance.
Kenny
Edited by: K. Kok on Sep 30, 2010 1:58 PM

No, I don't have a proper solution yet, but we adjusted our stylesheet., so we have a workaround A normal paragraph has 0.75 em and a paragraph inside the spans have a 1.0em value. Both paragraphs show the results in 12px.
It's not pretty, but it works.

ME2L screen change after version upgrade.

Similar Messages

Maybe you are looking for