ME2M_Timed out for ALV

Hi Guys,
I am unable to extract data's for the report ME2M in the foreground for ALV scope of list.But i am able to extract for the scope of list BEST for the same inputs.
Kindly advice on this.Can anybody help on this.
Thanks
With Regards
Ram
Edited by: sri ram on Nov 5, 2009 6:21 PM

May be slow. Try to increase run time. talk to your basis people about this.

Similar Messages

ALV Output splitting out for every 60 lines if i run in background...

Hello,
I am running ALV report in background.Output is splitting out for every 60 lines.If i run report inforeground it is not happening.
For exmaple...let us take there are 200 rows in output.for every 60 lines cloumn heading is printing.IF i download output into excel same for every 60 lines col headings are printing.issue is header should not print for every 60 lines...could you please let me know is there settings to avoid this ...?Thanks in advance.
Regards.
Abshek

Hi
Its May be LINE SIZE OVERFLOW.
Please Check SAP NOTE 1059001....
This URL helps you
http://help.sap.com/abapdocu_70/en/ABENPRINT.htm
Regards
Ajit

Help needed for ALV report

Hi,
i need to add coloums for the existing report which picks from G/L account.
in this report I need to add some more columns from COSP-KSTAR, which shows the cost element details from G/L account.
I need to restrict that cost element number according to the company code.
Plz see this and let me know the things.
1. I need to add FISCAL YEAR(COEP-GJAHR) in selection screen.
2. I need to add column: Employee Cost (CSKS-KOSTL)
3. add a column Staff Welfare (COSP-KSTAR) this is to restrict for the cost element 3000200 from G/L account
4. add a column Recruitment restrict for the cost element(COSP-KSTAR) 3100040 from G/L account
5. add a column Travels (suppressing some cost elements(COSP-KSTAR) and putting into Travels)
6. add a column Subcontracts restrict for the cost element (COSP-KSTAR)3100360 from G/L account
7. add a column Communication suppressing some cost elements and putting into Communication)
8. add a column Rent restrict for the cost element (COSP-KSTAR)3100055 from G/L account
9. add a column Back end Cost restrict for the cost element (COSP-KSTAR)3100065 from G/L account
i can hardcode these cost elements.
i did according to some of our sdn friends guidence but it is going to dump.
hear i am sending the code what i changed.
it is giving the error with the select.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
plz try to help me out in this issue.
hear i am sending the complete code what i worte.
*& Report ZPROJECT_PROFIT2
REPORT ZPROJECT_PROFIT2.
*********************MAIN DOCUMENTATION BLOCK*************************
Project Code :
Program Name :Zproject_profit1.
Purpose of program :This report will give the gross margin for a project as
*a whole based on some selected input criteria.
Author of program :JAYA KRISHNA .B.
INPUT/OUTPUT FILE :nil
TYPE-POOLS : SLIS."For ALV display.
TABLES : COEP, "CO Object: Line Items (by period).
 AUFK, "Order master data.
 csks, "Cost center master data
 cosp. "CO Objects
*& Include ZSTRUCTURE
types: BEGIN OF TY_COEP , "structure of table COEP.
 BUKRS LIKE COEP-BUKRS,
 KOKRS LIKE COEP-KOKRS,
 OBJNR LIKE COEP-OBJNR,
 gjahr like coep-gjahr,
 kstar like coep-kstar,
 OBJNR_N1 LIKE COEP-OBJNR_N1,
 PERIO LIKE COEP-PERIO,
 BEKNZ LIKE COEP-BEKNZ,
 WKGBTR LIKE COEP-WKGBTR,
 WOGBTR LIKE COEP-WOGBTR,
 BELNR LIKE COEP-BELNR,
 END OF TY_COEP,
 BEGIN OF TY_AUFK , "structure of table AUFK.
 BUKRS LIKE AUFK-BUKRS,
 KOKRS LIKE AUFK-KOKRS,
 OBJNR LIKE AUFK-OBJNR,
 KTEXT LIKE AUFK-KTEXT,
 ANFAUFNR LIKE AUFK-ANFAUFNR,
 AUFEX LIKE AUFK-AUFEX,
 USER2 LIKE AUFK-USER2,
 USER0 LIKE AUFK-USER0,
 USER1 LIKE AUFK-USER1,
 USER3 LIKE AUFK-USER3,
 USER6 LIKE AUFK-USER6,
 USER7 LIKE AUFK-USER7,
 USER8 LIKE AUFK-USER8,
 ABKRS(10) TYPE C,
 USER9 LIKE AUFK-USER9,
 AUFNR LIKE AUFK-AUFNR,
 END OF TY_AUFK,
 begin of ty_csks,
 kokrs like csks-kokrs,
 kostl like csks-kostl,
 bukrs like csks-bukrs,
 objnr like csks-objnr,
 end of ty_csks.
DATA : BEGIN OF IT_COSP occurs 100,
 OBJNR LIKE COSP-OBJNR,
 GJAHR LIKE COSP-GJAHR,
 KSTAR LIKE COSP-KSTAR,
 END OF IT_COSP.
DATA : IT_COEP TYPE TABLE OF TY_COEP, " Declaraton of tables COEP and AUFK.
 IT_AUFK TYPE TABLE OF TY_AUFK,
 IT_CSKS TYPE TABLE OF TY_CSKS.
 IT_COSP TYPE TABLE OF TY_COSP.
DATA : WA_COEP LIKE LINE OF IT_COEP, " Declaration of work areas for tables COEP and AUFK.
 WA_AUFK LIKE LINE OF IT_AUFK,
 WA_CSKS LIKE LINE OF IT_CSKS.
 WA_COSP LIKE LINE OF IT_COSP.
DATA : BEGIN OF IT_DISPLAY OCCURS 0, " Declaration of display table.
 OBJNR_N1 LIKE COEP-OBJNR_N1,
 OBJNR_N12 LIKE COEP-OBJNR_N1,
 KTEXT1 LIKE AUFK-KTEXT,
 WKGBTR LIKE COEP-WKGBTR,
 WOGBTR LIKE COEP-WOGBTR,
 WKGBTR1 LIKE COEP-WTGBTR,
 WOGBTR1 LIKE COEP-WOGBTR,
 ADDK LIKE COEP-WOGBTR,
 ADDO LIKE COEP-WOGBTR,
 ADDK1 LIKE COEP-WOGBTR,
 ADDO1 LIKE COEP-WOGBTR,
 PROFIT1 LIKE COEP-WOGBTR,
 PROFIT2 LIKE COEP-WOGBTR,
 BEKNZ LIKE COEP-BEKNZ,
 BUKRS LIKE AUFK-BUKRS,
 anfaufnr LIKE AUFK-anfaufnr,
 aufex like aufk-aufex,
 OBJNR LIKE AUFK-OBJNR,
 USER2 LIKE AUFK-USER2,
 USER0 LIKE AUFK-USER0,
 USER1 LIKE AUFK-USER1,
 USER3 LIKE AUFK-USER3,
 USER6 LIKE AUFK-USER6,
 USER7 LIKE AUFK-USER7,
 USER8 LIKE AUFK-USER8,
 ABKRS LIKE AUFK-ABKRS,
 USER9 LIKE AUFK-USER9,
 PERIO LIKE COEP-PERIO,
 AUFNR LIKE AUFK-AUFNR,
 STR(5) TYPE C,
 WORK(10) TYPE C,
 END OF IT_DISPLAY,
: BEGIN OF IT_DISPLAY1 OCCURS 0, " Declaration of second display table.
 OBJNR_N1 LIKE COEP-OBJNR_N1,
 OBJNR_N12 LIKE COEP-OBJNR_N1,
 KTEXT1 LIKE AUFK-KTEXT,
 WKGBTR LIKE COEP-WKGBTR,
 WOGBTR LIKE COEP-WOGBTR,
 WKGBTR1 LIKE COEP-WTGBTR,
 WOGBTR1 LIKE COEP-WOGBTR,
 ADDK LIKE COEP-WOGBTR,
 ADDO LIKE COEP-WOGBTR,
 ADDK1 LIKE COEP-WOGBTR,
 ADDO1 LIKE COEP-WOGBTR,
 PROFIT1 LIKE COEP-WOGBTR,
 PROFIT2 LIKE COEP-WOGBTR,
 BEKNZ LIKE COEP-BEKNZ,
 BUKRS LIKE AUFK-BUKRS,
 anfaufnr like aufk-anfaufnr,
 aufex like aufk-aufex,
 OBJNR LIKE AUFK-OBJNR,
 USER2 LIKE AUFK-USER2,
 USER0 LIKE AUFK-USER0,
 USER1 LIKE AUFK-USER1,
 USER3 LIKE AUFK-USER3,
 USER6 LIKE AUFK-USER6,
 USER7 LIKE AUFK-USER7,
 USER8 LIKE AUFK-USER8,
 ABKRS LIKE AUFK-ABKRS,
 USER9 LIKE AUFK-USER9,
 PERIO LIKE COEP-PERIO,
 AUFNR LIKE AUFK-AUFNR,
 STR(5) TYPE C,
 WORK(10) TYPE C,
 END OF IT_DISPLAY1.
data : it_field type slis_fieldcat_alv, " Declaration of ALV variables
 it_field_t type slis_t_fieldcat_alv,
 xlayout TYPE slis_layout_alv.
data : it_event type slis_t_event,
 wa_event like line of it_event.
DATA : WA_TOP TYPE SLIS_LISTHEADER,
 IT_TOP TYPE SLIS_T_LISTHEADER.
data:w_lines type i,
 w_occurs type i,
 STR(5) TYPE C,
 WORK(10) TYPE C.
 constants : c_selection type char20 value 'Selection based on'. " Declaration of a constant.
selection-screen BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS S_BUKRS FOR AUFK-BUKRS OBLIGATORY.
SELECT-OPTIONS S_OBJNR FOR AUFK-AUFNR.
SELECT-OPTIONS S_ANF FOR AUFK-ANFAUFNR.
SELECT-OPTIONS S_AUFEX FOR AUFK-AUFEX.
SELECT-OPTIONS S_USER2 FOR AUFK-USER2.
SELECT-OPTIONS S_USER0 FOR AUFK-USER0.
SELECT-OPTIONS S_USER1 FOR AUFK-USER1.
SELECT-OPTIONS S_USER3 FOR AUFK-USER3.
SELECT-OPTIONS S_USER6 FOR AUFK-USER6.
SELECT-OPTIONS S_ABKRS FOR AUFK-ABKRS.
SELECT-options s_gjahr for coep-gjahr obligatory.
SELECT-OPTIONS S_PERIO FOR COEP-PERIO OBLIGATORY.
SELECTION-SCREEN END OF BLOCK BLK .
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS : ONSITE RADIOBUTTON GROUP RADI.
PARAMETERS : OFFSHORE RADIOBUTTON GROUP RADI.
PARAMETERS : BOTH RADIOBUTTON GROUP RADI.
SELECTION-SCREEN END OF BLOCK BLK1 .
start-of-selection.
*ZAUFK
 " Selection of records from aufk to internal table.
IF ONSITE EQ 'X' .
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN s_anf AND
aufex in s_aufex and
aufnr IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 EQ 'X' .
ENDIF.
IF OFFSHORE EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufnR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS AND
USER9 <> 'X'.
ENDIF.
IF BOTH EQ 'X'.
SELECT
BUKRS
KOKRS
OBJNR
KTEXT
anfaufnr
aufex
USER2
USER0
USER1
USER3
USER6
USER7
USER8
ABKRS
USER9
AUFNR
FROM AUFK INTO TABLE IT_AUFK WHERE BUKRS IN S_BUKRS AND
anfaufnr IN S_anf AND
aufex in s_aufex and
aufNR IN S_OBJNR AND
USER2 IN S_USER2 AND
USER0 IN S_USER0 AND
USER1 IN S_USER1 AND
USER3 IN S_USER3 AND
USER6 IN S_USER6 AND
ABKRS IN S_ABKRS.
ENDIF.
*& Include ZCOEP
 " Selection of records from coep to internal table.
SELECT BUKRS KOKRS gjahr kstar OBJNR OBJNR_N1 PERIO BEKNZ WKGBTR WOGBTR FROM
COEP INTO TABLE
IT_COEP FOR ALL ENTRIES IN IT_AUFK WHERE OBJNR = IT_AUFK-OBJNR and
perio in S_PERIO.
*& Include ZPROFIT_CALC
 " Calculations for income and Profit of the employee.
if not it_coep[] is initial.
 select objnr gjahr wrttp versn kstar from cosp into TABLE It_cosp for
all entries in it_coep where objnr = IT_COEP-objnr .
endif.
LOOP AT IT_coep INTO WA_coep.
 read table IT_aufk into WA_aufk with key OBJNR = wa_coep-OBJNR.
case it_cosp-kstar.
when '3000200'.
it_cosp-kstar = cosp-kstar.
when '3100040'.
it_cosp-kstar = cosp-kstar.
when '3100360'.
it_cosp-kstar = cosp-kstar.
when '3100055'.
it_cosp-kstar = cosp-kstar.
when '3100065'.
it_cosp-kstar = cosp-kstar.
when '3100115'.
it_cosp-kstar = cosp-kstar.
when '3100120'.
it_cosp-kstar = cosp-kstar.
when '3100130'.
it_cosp-kstar = cosp-kstar.
when '3100135'.
it_cosp-kstar = cosp-kstar.
when '3100140'.
it_cosp-kstar = cosp-kstar.
when '3100145'.
it_cosp-kstar = cosp-kstar.
when '3100150'.
it_cosp-kstar = cosp-kstar.
when '3100155'.
it_cosp-kstar = cosp-kstar.
when '3100160'.
it_cosp-kstar = cosp-kstar.
when '3100165'.
it_cosp-kstar = cosp-kstar.
when '3100170'.
it_cosp-kstar = cosp-kstar.
endcase.
 IT_DISPLAY-BUKRS = WA_AUFK-BUKRS.
 IT_DISPLAY-anfaufnr = WA_AUFK-anfaufnr.
 it_display-aufex = wa_aufk-aufex.
 IT_DISPLAY-OBJNR = WA_AUFK-OBJNR.
 IT_DISPLAY-USER2 = WA_AUFK-USER2.
 IT_DISPLAY-USER0 = WA_AUFK-USER0.
 IT_DISPLAY-USER1 = WA_AUFK-USER1.
 IT_DISPLAY-USER3 = WA_AUFK-USER3.
 IT_DISPLAY-USER6 = WA_AUFK-USER6.
 IT_DISPLAY-USER7 = WA_AUFK-USER7.
 IT_DISPLAY-USER8 = WA_AUFK-USER8.
 IT_DISPLAY-ABKRS = WA_AUFK-ABKRS.
 IT_DISPLAY-USER9 = WA_AUFK-USER9.
 IT_DISPLAY-KTEXT1 = WA_AUFK-KTEXT.
 if WA_AUFK-abkrs = 01.
 IT_DISPLAY-STR = 'TM'.
 ENDIF.
 IF WA_AUFK-ABKRS = 02.
 IT_DISPLAY-STR = 'FP'.
 ENDIF.
 IF WA_AUFK-USER9 = 'X'.
 IT_DISPLAY-WORK = 'ONSITE'.
 ENDIF.
 IF WA_AUFK-USER9 <> 'X'.
 IT_DISPLAY-WORK = 'OFFSHORE'.
 ENDIF.
 it_display-ABKRS = it_display-user7.
 IF wa_coep-BEKNZ = 'S'.
 IT_DISPLAY-WKGBTR = WA_COEP-WKGBTR.
 IT_DISPLAY-WOGBTR = WA_COEP-WOGBTR.
 IT_DISPLAY-ADDK = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR.
 IT_DISPLAY-ADDO = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR.
 IT_DISPLAY-ADDK1 = 0.
 IT_DISPLAY-ADDO1 = 0.
 IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
 IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
 APPEND IT_DISPLAY.
 ENDIF.
 IF WA_COEP-BEKNZ = 'H'.
 IT_DISPLAY-WKGBTR1 = WA_COEP-WKGBTR.
 IT_DISPLAY-WOGBTR1 = WA_COEP-WOGBTR.
 IT_DISPLAY-ADDK1 = IT_DISPLAY-ADDK + IT_DISPLAY-WKGBTR1.
 IT_DISPLAY-ADDO1 = IT_DISPLAY-ADDO + IT_DISPLAY-WOGBTR1.
 IT_DISPLAY-ADDK = 0.
 IT_DISPLAY-ADDO = 0.
 IT_DISPLAY-PROFIT1 = IT_DISPLAY-ADDK1 + IT_DISPLAY-ADDK.
 IT_DISPLAY-PROFIT2 = IT_DISPLAY-ADDO1 + IT_DISPLAY-ADDO.
 APPEND IT_DISPLAY.
 ENDIF.
 collect it_display into it_display1.
 clear it_display.
ENDLOOP.
 "calc
*& Include ZPROFIT_DISPLAY
LOOP AT IT_DISPLAY1. "it_display.
 read table IT_COEP into WA_COEP with key OBJNR =
 IT_DISPLAY-OBJNR.
 read table IT_AUFK into WA_AUFK with key aufnr = IT_DISPLAY-aufnr.
 if WA_AUFK-abkrs = 01.
 STR = 'TM'.
 ENDIF.
 IF WA_AUFK-ABKRS = 02.
 STR = 'FP'.
 ENDIF.
 IF WA_AUFK-USER9 = 'X'.
 WORK = 'ONSITE'.
 ENDIF.
 IF WA_AUFK-USER9 <> 'X'.
 WORK = 'OFFSHORE'.
 ENDIF.
endloop.
clear it_field.
it_field-col_pos = 1.
it_field-fieldname = 'AUFNR'.
it_field-seltext_l = 'project id.'.
it_field-outputlen = 15.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 2.
it_field-fieldname = 'KTEXT1'.
it_field-seltext_l = 'Project Name'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 3.
it_field-fieldname = 'USER7'.
it_field-seltext_l = 'Start Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 4.
it_field-fieldname = 'USER8'.
it_field-seltext_l = 'End Date'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 5.
it_field-fieldname = 'USER2'.
it_field-seltext_l = 'Location'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
clear it_field.
it_field-col_pos = 6.
it_field-fieldname = 'USER0'.
it_field-seltext_l = 'Vertical'.
it_field-do_sum = 'X'.
it_field-outputlen = 20.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 7.
it_field-fieldname = 'USER1'.
it_field-seltext_l = 'Sub_vertical'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 8.
it_field-fieldname = 'USER3'.
it_field-seltext_l = 'Technology'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 9.
it_field-fieldname = 'USER6'.
it_field-seltext_l = 'Department'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 10.
it_field-fieldname = 'WORK'.
it_field-seltext_l = 'Onsite/Offshore'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 11.
it_field-fieldname = 'STR'.
it_field-seltext_l = 'T&M/FP'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 12.
it_field-fieldname = 'KOSTL'.
it_field-seltext_l = 'EMP COST'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 13.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'STAFF WELFARE'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 14.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RECRUITMENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 15.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'TRAVELS'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 16.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'SUBCONTRACT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 17.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'COMMUNICATION'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 18.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'RENT'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 19.
it_field-fieldname = 'KSTAR'.
it_field-seltext_l = 'BACKEND COST (PROJECT EXP)'.
it_field-outputlen = 10.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 20.
it_field-fieldname = 'ADDO'.
it_field-seltext_l = 'Direct costs'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 21.
it_field-fieldname = 'ADDO1'.
it_field-seltext_l = 'Income'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 22.
it_field-fieldname = 'PROFIT2'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 23.
it_field-fieldname = 'ADDK'.
it_field-seltext_l = 'Direct costs(Grp cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 24.
it_field-fieldname = 'ADDK1'.
it_field-seltext_l = 'Income(Grp Cur)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
it_field-col_pos = 25.
it_field-fieldname = 'PROFIT1'.
it_field-seltext_l = 'Profit(income-costs)'.
it_field-outputlen = 20.
it_field-do_sum = 'X'.
append it_field to it_field_t.
CLEAR it_field.
xlayout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = 'ZPROJECT_PROFIT1'
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE_PROFIT'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = xlayout
 IT_FIELDCAT = it_field_t
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = IT_DISPLAY1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear it_field_t.
"it_display.
FORM USER_COMMAND using r_ucomm like sy-ucomm rs type slis_selfield.
include zinteractive_profit."Secondary list for calling KO03.
ENDFORM. "USER_COMMAND.
Thanks & Regards,
Lakshmi..

Hi,
i did according to ur suggession.
now it is going dump.
and it is telling like this.
2629 i_event_name = 'SUBTOTAL_TEXT'
2630 is_subtottxt_info = ls_subtot_info
2631 ip_subtot_line = lr_data
2632 changing
2633 c_subtottxt = l_subtottxt.
2634 ls_lvc_data-value = l_subtottxt.
2635
2636 append ls_lvc_data to ct_lvc_data.
2637 endif.
2638
2639 ************************************
2640 * Column per Fieldcat Entry
2641 ************************************
2642 clear ls_lvc_data-style.
2643 loop at it_fcat_local assigning <ls_fcat>
2644 where tech ne 'X' and no_out ne 'X'.
2645 if l_invisible eq 'X'.
2646 clear l_invisible.
2647 if <ls_fcat>-do_sum is initial.
2648 continue.
2649 else.
2650 clear ls_lvc_data-col_pos.
2651 endif.
2652 endif.
2653
2654 add 1 to ls_lvc_data-col_pos.
2655
2656 assign component <ls_fcat>-fieldname
2657 of structure <ls_data> to <l_field_val
2658 if sy-subrc ne 0.
>>>>> message x000(0k).
2660 endif.
2661
2662 *... work on average
2663 if <ls_fcat>-do_sum eq 'C'.
2664 clear l_entries.
2665
2666 assign space to <l_unit>.
2667 if not <ls_fcat>-cfieldname is initial.
2668 assign component <ls_fcat>-cfieldname
2669 of structure <ls_data> to <l_unit>.
2670 endif.
2671 if not <ls_fcat>-qfieldname is initial.
2672 assign component <ls_fcat>-qfieldname
2673 of structure <ls_data> to <l_unit>.
2674 endif.
2675
2676 l_from = ls_grpl-index_from.
2677 l_to = ls_grpl-index_to.
2678 if ls_grpl-index_from is initial and
plz any of u help me to come out with solution.
Thanks & Regards,
Lakshmi..

Column headings are missing in the output for ALV?

Hi all,
i have coded a small report in ALV mode. i am getting the data but the column headings are missing.
iam not getting the column headings in the output. it is coming as blank. Could you all please help me out in this?
below is the code of my program:
 Includes *
*---Standard header and footer routines
INCLUDE zsrepthd.
*--- ALV Routines
INCLUDE zvsdi_alv_routines_ver3.
*--- Authorization Check
INCLUDE z_selection_auth_check.
 Types Declarations *
tables : ekpo.
 Types Declarations *
TYPES: BEGIN OF ty_ekpo,
 EBELN(18) TYPE C,
 EBELP(20) TYPE C,
 MATNR(18) TYPE C,
 WERKS(11) TYPE C,
 END OF ty_ekpo.
*-Output field name
TYPES: BEGIN OF ty_output,
 EBELN(18) TYPE C,
 EBELP(20) TYPE C,
 MATNR(18) TYPE C,
 WERKS(11) TYPE C,
 END OF ty_output.
*-Output field name
TYPES: BEGIN OF ty_fields,
 fname(60) TYPE c,
 END OF ty_fields.
 Internal Table Declarations *
DATA:it_ekpo TYPE STANDARD TABLE OF ty_ekpo,
*--- Alv parameters
 it_out_alvp TYPE typ_alv_form_params, "for alv parameters
*-Field catalog for ALV display
 it_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
*-Field names for Excel column headings
it_ekpo_fields TYPE STANDARD TABLE OF ty_fields WITH HEADER LINE.
**--To store output for Principial Pegging data
DATA: BEGIN OF it_output occurs 0,
 EBELN(18) TYPE C,
 EBELP(20) TYPE C,
 MATNR(18) TYPE C,
 WERKS(11) TYPE C,
 END OF it_output.
**--To store output for 2nd
DATA: BEGIN OF it_output1 occurs 0,
 text(2000),
 END OF it_output1.
 Data Declarations *
data: v_ebeln TYPE ekpo-ebeln,
 v_ebelp TYPE ekpo-ebelp,
 v_matnr TYPE ekpo-matnr,
 v_werks TYPE ekpo-werks.
 Constants Declarations *
CONSTANTS:
 c_0 TYPE i VALUE 0,
 c_x TYPE char1 VALUE 'X',
 c_i TYPE char1 VALUE 'I',
 c_eq TYPE char2 VALUE 'EQ',
 c_ekpo TYPE char4 VALUE 'EKPO',
 c_hyfn TYPE char1 VALUE '-'.
 Work Area Declarations *
DATA: x_output_ekpo type ty_output,
 x_ekpo type ty_ekpo.
 Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-f01.
SELECT-OPTIONS:
 s_ebeln FOR v_ebeln OBLIGATORY,
 s_ebelp FOR v_ebelp,
 s_matnr FOR v_matnr,
 s_werks FOR v_werks.
SELECTION-SCREEN END OF BLOCK b1.
 At Selection Screen *
AT SELECTION-SCREEN.
 Start-of-Selection *
START-OF-SELECTION.
*--- Check Authorizations for Selection-screen
PERFORM z_selection_auth_check.
*--- Fetch Purchasing Document Item data
PERFORM fetch_status_pp.
 End-of-Selection *
END-OF-SELECTION.
**-- Download data to final internal table.
PERFORM data_output.
IF NOT it_output[] IS INITIAL.
*--- Fill the structure for calling the ALV form
 PERFORM initialize_alv_params.
**-- Display ALV Report
 PERFORM setup_and_display_alv_ver2
 USING
 it_out_alvp "Parameter structure
 it_output[] "Internal Data table(header table)
 it_output[]. "Dummy table for Hierarchical ALV!!(item table)
 ENDIF.
IF it_output[] IS INITIAL.
 MESSAGE i999(zi) WITH 'No data found for selection'(i02).
ENDIF.
*& Form FETCH_STATUS_PP
Get data from ekpo table
FORM FETCH_STATUS_PP .
*-Fetch PP Data from ekpo table
REFRESH it_ekpo.
SELECT EBELN
 EBELP
 MATNR
 WERKS
 FROM ekpo
 INTO TABLE it_ekpo
 WHERE ebeln IN s_ebeln
 AND ebelp IN s_ebelp.
IF sy-subrc = c_0.
 SORT it_ekpo BY ebeln ebelp.
ENDIF.
ENDFORM. " FETCH_STATUS_PP
*& Form f_top_of_page
*This is to write the top of page
FORM top_of_page.
DATA: lt_list TYPE slis_t_listheader,
 lx_list TYPE slis_listheader.
*--- Title name
CLEAR lx_list.
lx_list-typ = 'S'.
lx_list-key = 'Title name'(t13).
lx_list-info = sy-title.
APPEND lx_list TO lt_list.
IF NOT lt_list IS INITIAL.
 CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = lt_list.
ENDIF.
ENDFORM. "top_of_page
*& Form init_page_head
Description : This subroutine initializes the fields in table BHDGD *
 for printing the report heading. *
FORM init_page_head.
bhdgd-line1 = 'SLA Status Report'(h04).
bhdgd-line2 = sy-title.
bhdgd-lines = sy-linsz.
bhdgd-fcpyrt = sy-uline.
bhdgd-inifl = '0'.
ENDFORM. "init_page_head
*& Form initialize_alv_params
Description : Form to initialize ALV Params
FORM initialize_alv_params.
CONSTANTS: lc_alv_grid TYPE char1 VALUE 'G', "Grid
 lc_u TYPE char1 VALUE 'U'.
MOVE 'IT_OUTPUT' TO it_out_alvp-tablname. "final table
MOVE sy-repid TO it_out_alvp-repid.
MOVE lc_alv_grid TO it_out_alvp-alvtype.
MOVE c_x TO it_out_alvp-bringdefaultvar.
MOVE lc_u TO it_out_alvp-variantsavetype.
ENDFORM. " initialize_alv_params
 FORM it_out_init_events *
-->this is form is to modify the events
FORM it_out_init_events
 CHANGING
 alevnts TYPE slis_t_event.
FIELD-SYMBOLS <alevnt> TYPE slis_alv_event.
LOOP AT alevnts ASSIGNING <alevnt>.
 CASE <alevnt>-name.
 WHEN slis_ev_top_of_page.
 MOVE 'TOP_OF_PAGE' TO <alevnt>-form.
 ENDCASE.
ENDLOOP.
ENDFORM. "it_out_init_events
*& Form DATA_OUTPUT
Download data to final internal table
FORM DATA_OUTPUT .
loop at it_ekpo into x_ekpo.
 x_output_ekpo-ebeln = x_ekpo-ebeln.
 x_output_ekpo-ebelp = x_ekpo-ebelp.
 x_output_ekpo-matnr = x_ekpo-matnr.
 x_output_ekpo-werks = x_ekpo-werks.
 append x_output_ekpo to it_output.
endloop.
ENDFORM. " DATA_OUTPUT
 FORM it_out_alv_fieldcat_before *
--> PT_FCAT *
--> ALVP *
FORM it_out_alv_fieldcat_before CHANGING
 pt_fcat TYPE slis_t_fieldcat_alv
 alvp TYPE typ_alv_form_params.
DATA: lx_fcat TYPE slis_fieldcat_alv.
CLEAR lx_fcat.
lx_fcat-tabname = 'IT_OUTPUT'.
lx_fcat-fieldname = 'EBELN'.
lx_fcat-col_pos = '1'.
lx_fcat-ddictxt = 'M'.
lx_fcat-seltext_l = 'Purchasing Doc No'(018).
lx_fcat-seltext_m = 'Purchasing Doc No'(018).
lx_fcat-seltext_s = 'Purchasing Doc No'(018).
lx_fcat-reptext_ddic = 'Purchasing Doc No'(018).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname = 'IT_OUTPUT'.
lx_fcat-fieldname = 'EBELP'.
lx_fcat-col_pos = '1'.
lx_fcat-ddictxt = 'M'.
lx_fcat-seltext_l = 'Item No Purchasing Doc'(020).
lx_fcat-seltext_m = 'Item No Purchasing Doc'(020).
lx_fcat-seltext_s = 'Item No Purchasing Doc'(020).
lx_fcat-reptext_ddic = 'Item No Purchasing Doc'(020).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname = 'IT_OUTPUT'.
lx_fcat-fieldname = 'MATNR'.
lx_fcat-col_pos = '1'.
lx_fcat-ddictxt = 'M'.
lx_fcat-seltext_l = 'Material'(010).
lx_fcat-seltext_m = 'Material'(010).
lx_fcat-seltext_s = 'Material'(010).
lx_fcat-reptext_ddic = 'Material'(010).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname = 'IT_OUTPUT'.
lx_fcat-fieldname = 'WERKS'.
lx_fcat-col_pos = '1'.
lx_fcat-ddictxt = 'M'.
lx_fcat-seltext_l = 'Supply plant'(013).
lx_fcat-seltext_m = 'Supply plant'(013).
lx_fcat-seltext_s = 'Supply plant'(013).
lx_fcat-reptext_ddic = 'Supply plant'(013).
APPEND lx_fcat TO pt_fcat.
ENDFORM. " it_out_alv_fieldcat_before.
Regards,
Shalini
Edited by: shalini reddy on Oct 7, 2008 5:08 PM

Hi,
The heading are in the table pt_fcat - you don't seem to be passing that in form....
PERFORM setup_and_display_alv_ver2
USING
it_out_alvp "Parameter structure
it_output[] "Internal Data table(header table)
it_output[]. "Dummy table for Hierarchical ALV!!(item table)
which I guessing in in one of the includes?
Saying that the extract pof code does not show where you are calling form it_out_alv_fieldcat_before ...which populates the headings...
Regards
Stu

Getting data out of ALV Grid

Hi,
i have an editable instance of cl_gui_alv_grid. Is there an easy way of getting out the data or do i really need to implement an event handler catching handle_data_changed? I'm not interested in the event itself, and cause the column is a kind of free text i dont need to check the data, so it is sufficient to get the data out when the user is clicking the ok button.

hi
refer this sample code... for non oops concept
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat, "slis_t_fieldcat_alv WITH HEADER LINE,
 wa_fieldcat TYPE lvc_s_fcat,
 gd_tab_group TYPE slis_t_sp_group_alv,
 gd_layout TYPE lvc_s_layo, "slis_layout_alv,
 gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
 Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-scrtext_m = 'Purchase Order'.
wa_fieldcat-col_pos = 0.
wa_fieldcat-outputlen = 10.
wa_fieldcat-emphasize = 'X'.
wa_fieldcat-key = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-scrtext_m = 'PO Item'.
wa_fieldcat-col_pos = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'STATU'.
wa_fieldcat-scrtext_m = 'Status'.
wa_fieldcat-col_pos = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-scrtext_m = 'Item change date'.
wa_fieldcat-col_pos = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-scrtext_m = 'Material Number'.
wa_fieldcat-col_pos = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-scrtext_m = 'PO quantity'.
wa_fieldcat-col_pos = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-scrtext_m = 'Order Unit'.
wa_fieldcat-col_pos = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-scrtext_m = 'Net Price'.
wa_fieldcat-edit = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos = 7.
wa_fieldcat-outputlen = 15.
wa_fieldcat-datatype = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PEINH'.
wa_fieldcat-scrtext_m = 'Price Unit'.
wa_fieldcat-col_pos = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
 Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
 Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
 EXPORTING
 i_callback_program = gd_repid
 i_callback_user_command = 'USER_COMMAND'
 is_layout_lvc = gd_layout
 it_fieldcat_lvc = it_fieldcat
 i_save = 'X'
 TABLES
 t_outtab = it_ekko
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
 Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
 UP TO 10 ROWS
 FROM ekpo
 INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
*& Form set_specific_field_attributes
 populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
 IF wa_ekko-netpr GT 10.
 ls_stylerow-fieldname = 'NETPR' .
 ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
 "set field to disabled
 APPEND ls_stylerow TO wa_ekko-field_style.
 MODIFY it_ekko FROM wa_ekko.
 ENDIF.
ENDLOOP.
endform. " set_specific_field_attributes

F.01 Summary Report for ALV grid

Hi all,
We have defined our financial statement version (FSV). We have been running tests in transaction F.01, when we choose ALV Tree output the transaction works perfectly.
However, if we choose ALV grid output and then choose "1" in the Summary Report field (highest summary level, only main points of Balance sheet P&L statement should be displayed) the output is not summarized at all.
In short, no matter what number we put in the Summary Report field we always get the same output.
What needs to be done in order to be able to use this summarization control?
Any help will be appreciated.
Juan
Edited by: Juan Carlos Mier Giraud on Jul 8, 2008 4:50 PM

Renata,
Thanks for your help. I am going to need a bit of help to develop the solutions described in the notes you pointed out.
Have you successfully created a summarization for ALV grid output?
I just want to know if it is worthy to devote time to it or just use classic list or ALV tree when appropiate.
Regards

Develope a report with out using alv

REPORT OBJECT:
 The report to list the material quantities returned because of breakage or expiry date or for any other reason.for material the quantities are summed up
under expiry quantity ,breakage and other quantity for a particular month.
 above mentioned is the object of my report .
 please help me any one to develop the report with out using ALV'S.

Hello Pravardhan
Your requirements are definitely demanding for an ALV list because all the calculations can be done by the user himself without any programming. The only thing you need to do is to collect all necessary data. In addition, all criteria for calculating subtotals/totals (e.g. month) must be available as separate column on the ALV list.
This is reasonable programming, anything else not. If the users have an ALV list they can easily adjust the layout to their specific needs without calling for a developer.
We should always develop our programs with a strong focus on the user's perspective.
Regards
Uwe

Standard def STB repeatedly blacks out for a second or 2

A site search on "black out" does not turn up a similar issue, of course it may be my search skills are lacking.
New subsciber since Sep 2010. I have 3 boxes, 2 standard QIP2500 phase 3 (basement/MBR) and 1 hi-def (LR). Hi def TV in MBR, standard in other 2. Both standards would on occassion 'black out' for just a second or 2 ever since original install. No problem with the hi-def. One standard is wired with coax, one with s-video, the hi-def with HDMI. When the black out occurs, the screen will freeze for an instant, then the screen goes black, then it comes back. The information on the box does not black out, the TVs don't power-off and restart. It's just the screen goes blank and then comes back. It happens without any seeming warning, and will happen at any time of day. Sometimes it will happen repeatedly, sometimes it won't happen for a long time. Both boxes have been repeatedly reset and rebooted with no improvement. During one tech call the tech had me relocate one of the standard boxes to the hi-def location to isolate that it wasn't a location (in-house cable) problem. I thought it curious since it was happening at 2 different locations but went through the drill anyway. The relocated standard worked for a few minutes, then went black for a second as the problem does. Plugging the high-def back in resolved the issue at that location. The tech said he would send 2 new standard boxes. The replacement boxes have not resolved the issue. Any suggestions?

if it's doing that on two different boxes using both coax and s-video then I think that leaves a possibility of the coax. that would be a unusual symptom of a bad coax/splitter but try this.
Wait for it to start acting up - when it starts acting up, stay tuned to that station, and hit your menu > customer support > in home agent > network diagnostics and click ok to start.
check the video signal using that menu selection. after it's done running it will give you a general message like "you're video signals are not in the optimal range" after you see that, hit info and then look at the SNR DB it should give you a number.
32-36 is optimal, below that is questionable.
If it is below that then it's probably going to be a problem with the splitter at your house, and you would either replace it yourself, or call verizon to replace it. be sure to tell them the DB

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for over an hour. Seems very complicated and cumbersome, Can you help?

Trying to scan photos from my photo album to a folder on my desktop. Have been trying to figure out for hours. Seems very complicated and cumbersome. Can anyone help? It's got to be much quicker (fewer key strokes) and simpler than what I've been able to discover.

Open the file, parse it, populate an ArrayCollection or XMLListCollection, and make the collection the DataGrid dataProvider:
http://livedocs.adobe.com/flex/3/html/help.html?content=Filesystem_08.html
http://livedocs.adobe.com/flex/3/html/help.html?content=12_Using_Regular_Expressions_01.ht ml
http://livedocs.adobe.com/flex/3/html/help.html?content=dpcontrols_6.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/ArrayCollection.html
http://livedocs.adobe.com/flex/3/langref/mx/collections/XMLListCollection.html
If this post answered your question or helped, please mark it as such.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

Why this code is not working for alv

Dear
Regards,
i have implemented the same program for ALV which i have used earlier in the reports. but now it is showing no output:
*& Report ZTCT1_ALV2 *
REPORT ztct1_alv2 .
CLASS lcl_event_receiver DEFINITION DEFERRED.
* INCLUDING TABLES.
TABLES: vbrk,
 vbrp,
 kna1,
 t001w,
 makt.
* DECLARATION OF INTERNAL TABLES.
DATA: BEGIN OF itab OCCURS 0, "Including the fields of VBRK and VBRP
 kunag LIKE vbrk-kunag, "Customer Code
 name1 LIKE kna1-name1, "Customer Name
 vbeln LIKE vbrk-vbeln, "Invoice #
 fkdat LIKE vbrk-fkdat, "Invoice Date
 werks LIKE vbrp-werks, "Plant
 name2 LIKE t001w-name1,"Plant Description
 matnr LIKE vbrp-matnr, "Material #
 maktx LIKE makt-maktx, "Material Description
 meins LIKE vbrp-meins, "Unit of Measure
 fklmg LIKE vbrp-fklmg, "Quantity
 netwr LIKE vbrp-netwr, "Amount
 END OF itab,
 BEGIN OF itnm OCCURS 0, "Including the fields of VBRK and KNA1
 kunag LIKE vbrk-kunag, "Customer Code
 name1 LIKE kna1-name1, "Customer Name
 END OF itnm,
 BEGIN OF itpt OCCURS 0, "Including the fields of VBRP and T001W
 werks LIKE vbrp-werks, "Plant
 name1 LIKE t001w-name1,"Plant Description
 END OF itpt,
 BEGIN OF itmt OCCURS 0, "Including the fields of VBRP and MAKT
 matnr LIKE vbrp-matnr, "Material #
 maktx LIKE makt-maktx, "Material description
 END OF itmt,
 BEGIN OF itsm OCCURS 0,
 kunag LIKE kna1-kunnr,
 name1 LIKE kna1-name1,
 fklmg LIKE vbrp-fklmg,
 netwr LIKE vbrp-netwr,
 END OF itsm,
 ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm,
 g_max TYPE i VALUE 100,
 g_repid LIKE sy-repid,
 gs_layout TYPE lvc_s_layo,
 g_container TYPE scrfname VALUE 'CUST_CONT',
 grid1 TYPE REF TO cl_gui_alv_grid,
 g_custom_container TYPE REF TO cl_gui_custom_container,
 grid2 TYPE REF TO cl_gui_alv_grid,
 gt_sort TYPE lvc_t_sort,
 gt_fieldcatalog TYPE lvc_t_fcat,
 w_tot_qty LIKE vbrp-fklmg,
 w_tot_amt LIKE vbrp-netwr,
* Reference to Dialogbox Container.
 dialogbox_container TYPE REF TO cl_gui_dialogbox_container,
* Reference to local class that handles events of GRID1 and
* DIALOGBOX_CONTAINER
 event_receiver TYPE REF TO lcl_event_receiver.
* SELECT-OPTIONS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbrp-werks, "Plant
 s_kunag FOR vbrk-kunag, "Customer
 s_matnr FOR vbrp-matnr, "Material Number
 s_fkdat FOR vbrk-fkdat. "Invoice Date
SELECTION-SCREEN END OF BLOCK input .
SELECTION-SCREEN SKIP 1.
* START-OF-SELECTION
START-OF-SELECTION.
SET SCREEN 100.
* CLEARING INTERNAL TABLES.
CLEAR: itab,
 itnm,
 itmt,
 itpt.
* QUERY FOR JOINING TABLES VBRK AND VBRP
SELECT vbrk~kunag
 vbrk~vbeln
 vbrk~fkdat
 vbrp~werks
 vbrp~matnr
 vbrp~meins
 vbrp~fklmg
 vbrp~netwr
 INTO CORRESPONDING FIELDS OF TABLE itab
 FROM vbrk
 INNER JOIN vbrp
 ON vbrk~vbeln = vbrp~vbeln
 WHERE vbrk~kunag IN s_kunag
 AND vbrk~fkdat IN s_fkdat
 AND vbrp~matnr IN s_matnr
 AND vbrp~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRK AND KNA1
SELECT kna1~kunnr AS kunag
 kna1~name1
 INTO TABLE itnm
 FROM kna1
 WHERE kna1~kunnr IN s_kunag.
* QUERY FOR JOINING TABLES VBRP AND T001W
SELECT t001w~werks
 t001w~name1
 INTO TABLE itpt
 FROM t001w
 WHERE t001w~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRP AND MAKT
SELECT makt~matnr
 makt~maktx
 INTO TABLE itmt
 FROM makt
 WHERE makt~matnr IN s_matnr.
* SORTING INTERNAL TABLES.
SORT itab BY kunag.
* LOOP AT itab.
* CLEAR: itmt, itnm, itpt.
* READ TABLE itnm WITH KEY kunag = itab-kunag.
* READ TABLE itmt WITH KEY matnr = itab-matnr.
* READ TABLE itpt WITH KEY werks = itab-werks.
* itab-name1 = itnm-name1.
* itab-maktx = itmt-maktx.
* itab-name2 = itpt-name1.
* MODIFY itab.
* ENDLOOP.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C' 'Customer Code'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C' 'Customer Name'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'VBELN' 'C' 'Invoice #'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKDAT' 'DATS' 'Invoice Date'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'WERKS' 'C' 'Plant'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME2' 'C' 'Plant Description'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MATNR' 'C' 'Material #'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MAKTX' 'C' 'Material Description'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MEINS' 'C' 'UoM'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN' 'Quantity'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR' 'Amount'.
 LOOP AT itab.
 CLEAR itsm.
 READ TABLE itnm WITH KEY kunag = itab-kunag.
 itsm-kunag = itab-kunag.
 itsm-name1 = itnm-name1.
 itsm-fklmg = itab-fklmg.
 itsm-netwr = itab-netwr.
 COLLECT itsm.
 ENDLOOP.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C' 'Customer Code'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C' 'Customer Name'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN' 'Quantity'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR' 'Amount'.
PERFORM sort_build USING gt_sort[].
PERFORM layout_init USING gs_layout.
* LOCAL CLASSES: Definition
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
 handle_double_click
 FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING e_row e_column,
 handle_close
 FOR EVENT close OF cl_gui_dialogbox_container
 IMPORTING sender.
PRIVATE SECTION.
 DATA: dialogbox_status TYPE c. "'X': does exist, SPACE: does not ex.
ENDCLASS. "lcl_event_receiver DEFINITION
* LOCAL CLASSES: Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
* §3.At doubleclick(1): The event DOUBLE_CLICK provides
* parameters of the clicked row and column.
* Use row parameter to select a line of the
* corresponding internal table.
METHOD handle_double_click.
 DATA: ls_sm LIKE LINE OF itsm,
 wa_itab LIKE ITAB.
* read selected row from internal table gt_sflight
 READ TABLE itsm INDEX e_row-index INTO ls_sm.
* §4.At Doubleclick(2): Select booking data
* READ TABLE ITAB WITH KEY KUNAG = LS_SM-KUNAG. .
 READ TABLE ITAB INTO WA_ITAB WITH KEY KUNAG = LS_SM-KUNAG.
* §5.At doubleclick(3): Create dialogbox to show detail list
* (if not already existent)
 IF dialogbox_status IS INITIAL.
 dialogbox_status = 'X'.
 PERFORM create_detail_list.
 ELSE.
 CALL METHOD dialogbox_container->set_visible
 EXPORTING
 visible = 'X'.
 CALL METHOD grid2->refresh_table_display.
 ENDIF.
ENDMETHOD. "handle_double_click
METHOD handle_close.
* §6.Handle the CLOSE-button of the dialogbox
* set dialogbox invisible
* (the dialogbox is destroyed outomatically when the user
* switches to another dynpro).
 CALL METHOD sender->set_visible
 EXPORTING
 visible = space.
* In this example closing the dialogbox leads
* to make it invisible. It is also conceivable to destroy it
* and recreate it if the user doubleclicks a line again.
* Displaying a great amount of data has a greater impact on performance.
ENDMETHOD. "handle_close
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* lcl_event_receiver (Implementation)
*=====================================================================
* FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD g_custom_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = g_repid
 txt2 = sy-subrc
 txt1 = 'Error in FLush'(500).
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
* MODULE PBO_ALV OUTPUT
MODULE pbo_alv OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'MAIN100'.
g_repid = sy-repid.
IF g_custom_container IS INITIAL.
 READ TABLE itsm.
 CREATE OBJECT g_custom_container
 EXPORTING
 container_name = g_container
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
 IF sy-subrc NE 0.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = g_repid
 txt2 = sy-subrc
 txt1 = 'The control could not be created'(510).
 ENDIF.
 CREATE OBJECT grid1
 EXPORTING
 i_parent = g_custom_container.
 gs_layout-grid_title = 'Invoice Summary'.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout
 CHANGING
 it_outtab = itsm[]
 it_fieldcatalog = gt_fieldcatalog
 it_sort = gt_sort.
 CREATE OBJECT event_receiver.
 SET HANDLER event_receiver->handle_double_click FOR grid1.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
 EXPORTING
 control = grid1.
ENDMODULE. "PBO_ALV OUTPUT
* MODULE PAI_ALV INPUT
MODULE pai_alv INPUT.
CALL METHOD cl_gui_cfw=>dispatch.
CASE sy-ucomm.
 WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. "PAI_ALV INPUT
*& Form fieldcatalog_init
* text
* -->LT_FIELDCATtext
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextT)
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat
 value(field_name) value(field_type) value(field_text).
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = field_name.
ls_fieldcatalog-datatype = field_type.
ls_fieldcatalog-reptext = field_text.
ls_fieldcatalog-coltext = field_text.
ls_fieldcatalog-seltext = field_text.
ls_fieldcatalog-tooltip = field_text.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form sort_build
* text
* -->LT_SORT text
FORM sort_build USING lt_sort TYPE lvc_t_sort.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-fieldname = 'KUNAG'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ls_sort-fieldname = 'NAME1'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ENDFORM. "sort_build
*& Form layout_init
* text
* -->LS_LAYOUT text
FORM layout_init USING ls_layout TYPE lvc_s_layo.
ls_layout-zebra = 'X'.
ls_layout-grid_title = 'Customer Details'.
ls_layout-sel_mode = 'A'.
ls_layout-cwidth_opt = 'X'.
ENDFORM. "layout_init
*& Form create_detail_list
* text
* --> p1 text
* <-- p2 text
FORM create_detail_list.
* create dialogbox container as dynpro-instance
* When the user switches to another screen, it is
* destroyed by lifetime mangagement of CFW
CREATE OBJECT dialogbox_container
 EXPORTING
 top = 150
 left = 150
 lifetime = cntl_lifetime_dynpro
 caption = 'INVOICE DETAILS'(200)
 width = 800
 height = 200.
CREATE OBJECT grid2
 EXPORTING i_parent = dialogbox_container.
* Register ABAP OO event 'CLOSE'. It is not necessary to register this
* event at the frontend (this is done during creation).
SET HANDLER event_receiver->handle_close FOR dialogbox_container.
* display data
gs_layout-grid_title = 'Invoice Details'(100).
CALL METHOD grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = 'itab'
 is_layout = gs_layout
 CHANGING
 it_outtab = itab[]
 it_fieldcatalog = gt_fieldcatalog
 it_sort = gt_sort.
CALL METHOD cl_gui_control=>set_focus
 EXPORTING
 control = grid2.
ENDFORM. " create_detail_list[code][/
code]

Hi,
I also copied and pasted the same code check once again by copying this code and create screens by double clicking on 100.
CLASS lcl_event_receiver DEFINITION DEFERRED.
* INCLUDING TABLES.
TABLES: vbrk,
 vbrp,
 kna1,
 t001w,
 makt.
* DECLARATION OF INTERNAL TABLES.
DATA: BEGIN OF itab OCCURS 0, "Including the fields of VBRK and VBRP
 kunag LIKE vbrk-kunag, "Customer Code
 name1 LIKE kna1-name1, "Customer Name
 vbeln LIKE vbrk-vbeln, "Invoice #
 fkdat LIKE vbrk-fkdat, "Invoice Date
 werks LIKE vbrp-werks, "Plant
 name2 LIKE t001w-name1,"Plant Description
 matnr LIKE vbrp-matnr, "Material #
 maktx LIKE makt-maktx, "Material Description
 meins LIKE vbrp-meins, "Unit of Measure
 fklmg LIKE vbrp-fklmg, "Quantity
 netwr LIKE vbrp-netwr, "Amount
 END OF itab,
 BEGIN OF itnm OCCURS 0, "Including the fields of VBRK and KNA1
 kunag LIKE vbrk-kunag, "Customer Code
 name1 LIKE kna1-name1, "Customer Name
 END OF itnm,
 BEGIN OF itpt OCCURS 0, "Including the fields of VBRP and T001W
 werks LIKE vbrp-werks, "Plant
 name1 LIKE t001w-name1,"Plant Description
 END OF itpt,
 BEGIN OF itmt OCCURS 0, "Including the fields of VBRP and MAKT
 matnr LIKE vbrp-matnr, "Material #
 maktx LIKE makt-maktx, "Material description
 END OF itmt,
 BEGIN OF itsm OCCURS 0,
 kunag LIKE kna1-kunnr,
 name1 LIKE kna1-name1,
 fklmg LIKE vbrp-fklmg,
 netwr LIKE vbrp-netwr,
 END OF itsm,
 ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm,
 g_max TYPE i VALUE 100,
 g_repid LIKE sy-repid,
 gs_layout TYPE lvc_s_layo,
 g_container TYPE scrfname VALUE 'CUST_CONT',
 grid1 TYPE REF TO cl_gui_alv_grid,
 g_custom_container TYPE REF TO cl_gui_custom_container,
 grid2 TYPE REF TO cl_gui_alv_grid,
 gt_sort TYPE lvc_t_sort,
 gt_fieldcatalog TYPE lvc_t_fcat,
 w_tot_qty LIKE vbrp-fklmg,
 w_tot_amt LIKE vbrp-netwr,
* Reference to Dialogbox Container.
 dialogbox_container TYPE REF TO cl_gui_dialogbox_container,
* Reference to local class that handles events of GRID1 and
* DIALOGBOX_CONTAINER
 event_receiver TYPE REF TO lcl_event_receiver.
* SELECT-OPTIONS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbrp-werks, "Plant
 s_kunag FOR vbrk-kunag, "Customer
 s_matnr FOR vbrp-matnr, "Material Number
 s_fkdat FOR vbrk-fkdat. "Invoice Date
SELECTION-SCREEN END OF BLOCK input .
SELECTION-SCREEN SKIP 1.
* START-OF-SELECTION
START-OF-SELECTION.
SET SCREEN 100.
* CLEARING INTERNAL TABLES.
CLEAR: itab,
 itnm,
 itmt,
 itpt.
* QUERY FOR JOINING TABLES VBRK AND VBRP
SELECT vbrk~kunag
 vbrk~vbeln
 vbrk~fkdat
 vbrp~werks
 vbrp~matnr
 vbrp~meins
 vbrp~fklmg
 vbrp~netwr
 INTO CORRESPONDING FIELDS OF TABLE itab
 FROM vbrk
 INNER JOIN vbrp
 ON vbrk~vbeln = vbrp~vbeln
 WHERE vbrk~kunag IN s_kunag
 AND vbrk~fkdat IN s_fkdat
 AND vbrp~matnr IN s_matnr
 AND vbrp~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRK AND KNA1
SELECT kna1~kunnr AS kunag
 kna1~name1
 INTO TABLE itnm
 FROM kna1
 WHERE kna1~kunnr IN s_kunag.
* QUERY FOR JOINING TABLES VBRP AND T001W
SELECT t001w~werks
 t001w~name1
 INTO TABLE itpt
 FROM t001w
 WHERE t001w~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRP AND MAKT
SELECT makt~matnr
 makt~maktx
 INTO TABLE itmt
 FROM makt
 WHERE makt~matnr IN s_matnr.
* SORTING INTERNAL TABLES.
SORT itab BY kunag.
 LOOP AT itab.
 CLEAR itsm.
 READ TABLE itnm WITH KEY kunag = itab-kunag.
 itsm-kunag = itab-kunag.
 itsm-name1 = itnm-name1.
 itsm-fklmg = itab-fklmg.
 itsm-netwr = itab-netwr.
 COLLECT itsm.
 ENDLOOP.
* END-OF-SELECTION.
* If not itsm[] is initial.
* CALL SCREEN 100.
* endif.
* LOCAL CLASSES: Definition
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
 handle_double_click
 FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING e_row e_column,
 handle_close
 FOR EVENT close OF cl_gui_dialogbox_container
 IMPORTING sender.
PRIVATE SECTION.
 DATA: dialogbox_status TYPE c. "'X': does exist, SPACE: does not ex
ENDCLASS. "lcl_event_receiver DEFINITION
* LOCAL CLASSES: Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
* §3.At doubleclick(1): The event DOUBLE_CLICK provides
* parameters of the clicked row and column.
* Use row parameter to select a line of the
* corresponding internal table.
METHOD handle_double_click.
 DATA: ls_sm LIKE LINE OF itsm,
 wa_itab LIKE ITAB.
* read selected row from internal table gt_sflight
 READ TABLE itsm INDEX e_row-index INTO ls_sm.
* §4.At Doubleclick(2): Select booking data
* READ TABLE ITAB WITH KEY KUNAG = LS_SM-KUNAG. .
 READ TABLE ITAB INTO WA_ITAB WITH KEY KUNAG = LS_SM-KUNAG.
* §5.At doubleclick(3): Create dialogbox to show detail list
* (if not already existent)
 IF dialogbox_status IS INITIAL.
 dialogbox_status = 'X'.
 PERFORM create_detail_list.
 ELSE.
 CALL METHOD dialogbox_container->set_visible
 EXPORTING
 visible = 'X'.
 CALL METHOD grid2->refresh_table_display.
 ENDIF.
ENDMETHOD. "handle_double_click
METHOD handle_close.
* §6.Handle the CLOSE-button of the dialogbox
* set dialogbox invisible
* (the dialogbox is destroyed outomatically when the user
* switches to another dynpro).
 CALL METHOD sender->set_visible
 EXPORTING
 visible = space.
* In this example closing the dialogbox leads
* to make it invisible. It is also conceivable to destroy it
* and recreate it if the user doubleclicks a line again.
* Displaying a great amount of data has a greater impact on
*performance.
ENDMETHOD. "handle_close
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* lcl_event_receiver (Implementation)
*=====================================================================
* FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD g_custom_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = g_repid
 txt2 = sy-subrc
 txt1 = 'Error in FLush'(500).
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
* text
module STATUS_0100 output.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'MAIN100'.
g_repid = sy-repid.
IF g_custom_container IS INITIAL.
 READ TABLE itsm.
 CREATE OBJECT g_custom_container
 EXPORTING
 container_name = g_container
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
 IF sy-subrc NE 0.
 CALL FUNCTION 'POPUP_TO_INFORM'
 EXPORTING
 titel = g_repid
 txt2 = sy-subrc
 txt1 = 'The control could not be created'(510).
 ENDIF.
 CREATE OBJECT grid1
 EXPORTING
 i_parent = g_custom_container.
 gs_layout-grid_title = 'Invoice Summary'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C'
'Customer Code'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C'
'Customer Name'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN'
'Quantity'.
 PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR'
'Amount'.
PERFORM sort_build USING gt_sort[].
PERFORM layout_init USING gs_layout.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout
 CHANGING
 it_outtab = itsm[]
 it_fieldcatalog = gt_fieldcatalog
 it_sort = gt_sort.
 CREATE OBJECT event_receiver.
 SET HANDLER event_receiver->handle_double_click FOR grid1.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
 EXPORTING
 control = grid1.
endmodule. " STATUS_0100 OUTPUT
* MODULE PAI_ALV INPUT
MODULE USER_COMMAND_0100.
CALL METHOD cl_gui_cfw=>dispatch.
CASE sy-ucomm.
 WHEN 'BACK' OR 'EXIT' OR 'CANC'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. "PAI_ALV INPUT
*& Form fieldcatalog_init
* text
* -->LT_FIELDCATtext
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextT)
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat
 value(field_name) value(field_type)
value(field_text).
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = field_name.
ls_fieldcatalog-datatype = field_type.
ls_fieldcatalog-reptext = field_text.
ls_fieldcatalog-coltext = field_text.
ls_fieldcatalog-seltext = field_text.
ls_fieldcatalog-tooltip = field_text.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form sort_build
* text
* -->LT_SORT text
FORM sort_build USING lt_sort TYPE lvc_t_sort.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-fieldname = 'KUNAG'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ls_sort-fieldname = 'NAME1'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ENDFORM. "sort_build
*& Form layout_init
* text
* -->LS_LAYOUT text
FORM layout_init USING ls_layout TYPE lvc_s_layo.
ls_layout-zebra = 'X'.
ls_layout-grid_title = 'Customer Details'.
ls_layout-sel_mode = 'A'.
ls_layout-cwidth_opt = 'X'.
ENDFORM. "layout_init
*& Form create_detail_list
* text
* --> p1 text
* <-- p2 text
FORM create_detail_list.
* create dialogbox container as dynpro-instance
* When the user switches to another screen, it is
* destroyed by lifetime mangagement of CFW
CREATE OBJECT dialogbox_container
 EXPORTING
 top = 150
 left = 150
 lifetime = cntl_lifetime_dynpro
 caption = 'INVOICE DETAILS'(200)
 width = 800
 height = 200.
CREATE OBJECT grid2
 EXPORTING i_parent = dialogbox_container.
* Register ABAP OO event 'CLOSE'. It is not necessary to register this
* event at the frontend (this is done during creation).
SET HANDLER event_receiver->handle_close FOR dialogbox_container.
* display data
gs_layout-grid_title = 'Invoice Details'(100).
CALL METHOD grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = 'itab'
 is_layout = gs_layout
 CHANGING
 it_outtab = itab[]
 it_fieldcatalog = gt_fieldcatalog
 it_sort = gt_sort.
CALL METHOD cl_gui_control=>set_focus
 EXPORTING
 control = grid2.
ENDFORM. " create_detail_list
Nothing wrong in the code i am able to see the output with five records and the pop-up screen on double clicking a value.
Kindly close the thread or revert back

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
Using ALV, we can have three types of reports:
 1. Simple Report
 2. Block Report
 3. Hierarchical Sequential Report
Reward useful points
Siva

When playing music on my iPhone 4 using earphones when out for a run, I select shuffle and only 3 or 4 songs play then the music stops as if I have set only 3 songs to play. How do I correct this??

When I am out for a run using earphone and a running APP I set my iphone 4 to shuffle songs but suddenly only 3-4 or 5-6 songs play and then they stop as if I set something to only play a certain number of songs from my playlist, its really irritating as I have to stop and press shuffle again, it happens with all my playlists and never mid song. This is a sudden issue as before I would just select shuffle and run and the music kept playing until I stopped it. Have I set something in error?? have looked at settings in General and in music and I am not sure what to do? any ideas??

Just realised this happens without earphones and without using the running app. My iphone will only play 2 songs when I select shuffle in any playlist, driving me mad!

My power just went out for a few seconds- is there any way to restore the document I was working on?

My power just went out for a few seconds. Is there any way to restore my document? I had already had 2 hrs worth of work for an interview tomorrow and do not have time to start from scratch?

UPS
http://www.amazon.com/CyberPower-CP1500PFCLCD-Compatible-1500VA-Tower/dp/B00429N 19W/
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
Recovery Mode
http://support.apple.com/kb/HT4718
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
General purpose Mac troubleshooting guide:
Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems:
Isolating an issue by using another user account
Identifying resource hogs and other tips:
Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode":
Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems:
Apple Hardware Test
General Mac maintenance:
Tips to keep your Mac in top form
You should have TimeMachine saving your work, YOU need to be doing Save As somewhere else as you work, you don't say what application and whether you have Lion 10.7 or later (10.8.4)
Can't say enough for the importance of using a UPS. Get one and plug your modem, router, computer into one and don't worry about data loss and lost modem or corruption or the effects to electronic devices.
This forum deals with a desktop/tower 65lb Mac Pro
http://www.apple.com/support/macpro

My speakers crackle out for a few seconds

Hi i have a macbook pro retina 15 inch mid-2012, my speakers occasionally fizzle out for a few seconds and then return to normal. Do you know what this could be?

Try a SMC reset
http://support.apple.com/kb/HT3964
And a NVRAM/PRAM reset
http://support.apple.com/kb/HT1379

ME2M_Timed out for ALV

Similar Messages

Maybe you are looking for