ME2N report cannot show the PO number properly

Hi Sir/Madam,
Why some of the header cannot show the PO number properly in ME2N report (refer to the attachment)?
Please advise the root cause and how to prevent it, thanks load.
Best Regards,
Gary

Dear Patra,
Thanks for your reply. Attached the expend selection for your reference.
Actually the issue is happening occasionally.
Best Regards,
Gary

Similar Messages

Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
Prashanth

Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

A report which shows the purchase order MM and the linked vendor invoice

Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.Rossi

Hi,
ME80FN with PO History View
ME2N with Scope of List "ALLES"

A report which shows the vendor invoice and its purchase order MM

Hi All,
I wonder if ther's a SAP standard report which shows the vendor invoice (the FI document) and its purchase order MM.
Could anyone help me?
Thanks
G.Rossi
Edited by: Lakshmipathi on Aug 2, 2011 2:24 PM
Thread Locked - Reason Cross Posted

Dear,
you can use FBL1N,
From there you can view following things:
1. Vendor Invoice = Reference
2. Document type = KR and RE for Invoices
3. Po Number
4. Amount
you can enable there many fields as per your requirement.
Hope this helps!!!
Br,Vivek

My skype caller id shows the correct number but al...

When I call using my skype online number, caller id shows the correct number but also displays someone elses name. How can I remove the name?

I have the same problem. Although I have my Caller ID set to show my Skype Number businesses tell me they're seeing area code 559 with a random/different last 4 digits each time. I just went through an account verification with a vendor and it was impossible to get them to verify - kept telling me I need to be calling from the number they have on file.
Come on Microsoft. There's no way to actually get support (for a paid product no less), let alone see anyone participating in support (hic) forums to resolve countless issues that others are reporting.

HT4061 i lost my Pad Please how can i track it ,I cannot remmeber the serial number.

i lost my Pad Please how can i track it ,I cannot remmeber the serial number. Please help me find it

Unless you enabled Find My iPad on it before it was lost then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
There are some methods described on this page for how you might be able to find the serial number :
http://support.apple.com/kb/HT4061
Or you could try your support profile : https://supportprofile.apple.com/MySupportProfile.do

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

I am trying to reinstall Logic Studio 7 and I cannot find the serial number. It's suppose to be in one of the installation booklets. I'm not sure which one. Could you help me?

I am trying to reinstall Logic Studio that i bought back in 2008, and I cannot find the serial number. I think I barely remember running into this problem before with this application. When i use the installation disc it tells me that the serial number is located in one of the installation booklets, and it doesn't explain to me which one. Can you help me?
Thank You!
Steven harris!
<Email Edited by Host>

Hello Steven,
Check out this article:
Logic Studio: Locating the Support ID and Serial Number
http://support.apple.com/kb/HT3416
You can find the Logic Studio Support ID on the front of the Installing Your Software booklet included in the software box.
The front of the Logic Studio Installing Your Software booklet:
All the very best,
Sterling

CUCM doesn't show the translated number

Hey guys,
I had this working on my Call Manager and not sure what has happened, was hoping someone could help.
I have a number of translation patterns configured so that if a user dials another user by their external DID number, the CM routes the call internally.
This still works - however after dialling the full external number, once the dialling is finished we used to see the translated (shortened internal) number of the phone but now we are only seeing exactly what was dialled.
Example:
Internal user has extension 2000, this extension has a DID of number 073072000
If I am on extension 2200 and I dial 073072000 then on my phones display it would change to 2000 as soon as I finished dialling digits.
Now for some reason it is no longer changing the number to 2000 after I finish dialling - it just displays the actual dialled digits of 073072000.
I know that the translation pattern is working, due to call access restrictions the call would normally be blocked. It just is not showing the translated pattern on the phone display.
The pattern is configured as:
007307.2XXXX
The Called Party Transformation is set to discard PreDot.
Thoughts?

Thanks this was the setting I had changed!
I had turned it to True as this meant incoming calls from UCCX to agents then shows the callers number and not the CTI port that sends the call over to CUCM - which is annoying.
Sucks you can only have it one way or the other system wide.

I have purchased Adobe Acrobat XI Pro. I have a serial number (removed by host) I purchased this product after the free test period had expired. Now I cannot enter the serial number into the website because it says that the product is not

I have purchased Adobe Acrobat XI Pro. I purchased it after the free test period had expired. In the drop down menue on the website XI Pro is not listed so I cannot enter the serial number [removed by host]. So I cannot use the program. John Steele. [personal information removed by host] Thank you

@Bill, I removed your post, since its subject now contained the serial number which I could not remove.
Bill’s original reply: I cannot edit your post. Please remove the S/N ASAP. You should never post S/Ns.
I will add to Bill’s reply and add that you should not post your phone numbers or other personal information on the internet.

My messages won't say the contact name only shows the phone number, how do you change this when the contact is in my phone under that number already?

My messages won't say the contact name only shows the phone number, how do you change this when the contact is in my phone under that number already?

I thought that at first, but I have text this person before and had received responses in a timely manner. Its just weird that it all of a sudden removed their name.
Would this affect the delivery of the text message?

Report doesnt show the text for employee ids.....

Hi guys,
I am facing the following issue.
We have a report which is fetching data from the infocube.Whenever we check the report we are facing the issue : report doesnt show the text for ~10 employee ids,its showing the key in both key and text columns, its showing both text and key for the remaining employee ids.We checked the master data for employee id and it contains master for the employee ids which are not displayed text in the report.
Can any body help on this.
Regards
Prasad

Hi Prasad,
for your infoobject do you have all three texts available (short, medium and long)? Are all three loaded? You might have the wrong text displayed in your report. Check if you have the short, medium or long texts displayed. Dont forget to check the languages too ....
Kind Regards,
Alex
Edited by: Alexandre Soares on Dec 2, 2008 3:33 PM

Report to show the list of Equipment with Attachment.

Hi Experts,
i have attached a file in Equipment Master IE02. Any report can show the list of equipment with attachments?
Please advise.
Thank You
Best Regards

If you are using IE02, then i think you are using object services - I have never seen a way to view these in an equipment list. You can only view these while looking at the equipment. If you use DMS (tcode CV01N) these will show on IE07 as well as in the notification or work order when you use this equipment.

I cannot find the serial number in my macbook.

I cannot find the serial number in my macbook. I had check it already . But it had written System Serial in the Serial number bar . I also put out the battery . I can see the label , but the i can not see clearly. Many of numbers are missing. Please Help. How can i find the serial number?
My bOx and my recipet are missed already.Please help. I cannot log in the facetime and message .....
I am using macbook pro 2008 C2D 2.5GHz

Open About This Mac and click on the OS X version number, it will change to (first) the build number and (second) the machine serial number.

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request.

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request in order to buy the product it's so irritating I'm about to just do a different product altogether... anyone know how to get or bypass the serial number request?

You must first make the purchase, then you will receive the serial number you are asking about. YOu do not acquire the serial number thru the software. You acquire it thru the purchase, possibly via a follow-up confirmation email.

ME2N report cannot show the PO number properly

Similar Messages

Maybe you are looking for