ME2N Same variant availble for all users

Hello, its my first post,
Please, somebody knows how can i avail one same variant for all users at Tcode ME2N?
Thanx a lot for your contribute,
Jean Baena

Hello,
Please see information in note 383464
     You can deactivate the 'field-by-field' SPA/GPA attribute by using
     selection variants. Create a new variant for this. When you save this
     variant, you can control the SPA/GPA attribute in the field attributes.
     If a user chooses this variant, then the system also only uses the
     values that are stored in the variant.
     To use a variant already when starting the transaction, create a new
     transaction and start the list display report (for example, RM06EN00)
     using a user-defined variant.
     From Release 4.6B the variant used last is saved as inital variant. If
     you execute the transaction with a selection variant, then the system
     stores this variant for the specific user and for the specific
     transaction. If you execute the respective transaction again, the system
     automatically chooses the selection variant which you used the last time
     again (see Note 326221).
     For the document overview, you have the option to use customer
     enhancement MEQUERY1 to execute own standard variants (see Note 377180).
Regards,

Similar Messages

  • How to set the same General settings for all users

    Hi Experts,
    How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
    Regards,
    Arti.

    Hi Arti!
    You can default user settings in a PFCG role, in the "personalization" tab.
    If you have a PFCG role that is common to all your users, you can set the default values here.
    However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
    Matthias

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • Audio output device same for all users Yosemite

    I use more then one account on my recent Macbook Pro.  For the first account I like to have the audio output set to the speakers but for the other account I want the audio output set to the headphones. 
    With Mavericks the Macbook remembered the last audio settings for each user account.
    With Yosemite any changes to the audio settings (input, output,system sound, etc.) on one account affects the audio setting on other the user account. 
    I tried various audio settings to see if it affected them all.  It seems to.
    I tried seeing if it happened only when the users accounts were logged in or it was different on boot etc.  It seems to always change the settings for all users no matter what. 
    I tried resetting the PRAM but that did not solve it.
    I tried a 3rd party program called AudiSwitcher from the App store to see if this could help but no luck.
    I searched here and more widely to see if anyone else was reporting this and found one other person who seemed to mention the same problem and they concluded "I did some tests and came to the conclusion that the system now does not remember settings for each user, and applies the current setting of audio output for all accounts."
    Curious to know:
         a) Does this affect other people?  If not, I'll look for conflicting apps on my computer.
         b) Is this intended behavior or should I look for a way to report it as a bug?
         c) And most importantly if there is a way around it? 
    Thanks!

    I'm also have the same problem. I tested it on fresh Yosemite installation without any additional software. Your mentioned my conclusion about tests.

  • Portal favourites for all users to be same

    hi all,
    we have implemented ESS over portal and i have added some links to portal favourites.
    they are appearing fine in my portal favourites section.
    Now the requirement is that i want all users to see the same links when they logon by their respective ids.
    but this is not happening. those links are in portal favourites for my id only.
    Kindly let me what to do.
    the way I added those links was to just click over the link in ESS workset and from the page title bar, selected the option, add to portal favourite.
    thanks

    Hi Ankur,
    I guess you want one person to manage favorites for all the users of Portal. In such a case you can achieve this without any development work using KM. Just follow the below steps:
    1. Create a folder in KM inside documents folder (Content Admin > KM content > documents), say Favorites.
    2. Create links (external/Internal) inside the folder.
    3. Create a KM navigation I view by name Favorites and edit the property Path to Initially Displayed Folder = /documents/favorites (your folder path in KM)
    4. Add this I view to your homepage and page to the subsequent role
    5. Assign the role to the user.
    It works like custom favorites for all users using which you can centrally control user favorites just by adding or removing links in the KM favorites folder.
    Regards,
    Santhosh

  • IH01 default screen variant for all users

    Hi,
       I want location hierarchy, equipment installed and BOM explosion checked in the transaction IH01 for all users. I can do this through a screen variant but the user will have to choose it every time he enters this transaction. Is there a way that the above fields default as checked everything a user enters the t-code? I looked for it in SPRO and could not find it. Any help would be greatly appreciated. Thanks
    Ajay

    hi
    if the variant you have created is the only one available then it will display to all the user,but the if some other variant is there with user name then it will be displayed for the user logged on .
    only thing is don't authorize the user to create the variant
    from SAP help:
    Each user can also create their own selection screen. The selection screen defined by you is only then proposed by the system, if no individual selection screen has been defined for the user under their user name.
    If you want to define an individual selection screen for each user, and the user-specific selection screen should be proposed automatically when the report is called up, the name of the report variant must begin with U_USERNAME.
    Maintenance of selection variants
    When you execute the function, you reach the initial screen with all the selection fields. There you can define the standard selection screen. This selection screen is then always proposed if no individual selection screen has been defined for the user under the name U_USERNAME.
    regards
    thyagarajan

  • Saving AVL view settings for all users

    Hi,
    I am working on web dynpro abap application which shows alv results of more reports (you will select report and it will show the alv table result).
    I have to use some standard reports for this, so I copied it to Z report and modify it so this is possible. Problem I have is that is standard report the output have maybe 10 columns, but the table I got from the report has maybe 26. I want to limit shown columns on the ALV with settings of view for alv, but the assignment is only possible for the user.
    Is there any way how to create one view settings and make it initial for all users?
    I know there is a way of modifying the standard view via abap code, but I want to keep the possibility to show all fields if required.
    Thanks for your help very much.
    Martin

    Hi,
    another problem, I was expecting the newly created variant / layout / settings for view  would be tied to the displayed table (which sounds kind of wired as I wrote it down). 
    But since I am displaying different tables in the same UI element and binding the tables and their structures dynamically the created variant applies to all of the tables (or thats how it seems) so the table which have all fields different then the layout shows nothing.
    Do you have any ideas how to get around it?
    My idea would be to store the layout (but i have no idea how it looks at db level) and identification of the report to some customer table and fill attribute of alv table dynamically according to used report. But thats just my idea, I have no idea if it si possible to do it like this.
    Is there some other way how to accomplish this functionality?
    I have also tried to do it on fieldcatalog level of the alv table, but it seems to show first, let's say, 8 fields if there is 8 fields in the fieldcatalog.
    Any help or ideas please??
    Thanks
    Martin
    Edited by: Martin Gabris on May 6, 2011 4:11 PM

  • Unable to change keyboard layout for all users on Windows Server 2012 R2

    Hi,
    I have a requirement where I need to support national keyboard layout for Danish for all users on that machine. When I ran the powershell with script Set-WinUserLanguageList
    -LanguageList da-DK it only sets the Danish keyboard layout to the specific logged in user.However the for other users its same English(US) keyboard which is not expected.
    Please help me how to set the Danish keyboard for all users on the machine. Its Urgent!Thanks

    Hi Mike,
    Thanks for reply.
    But I need to configure everything using powershell script. Is it possible to use powershell script to setting group policy/ adding logon script ?
    These are pretty basic administration tasks and almost always quicker to accomplish with the GUI. Why do you want to use a PowerShell script?
    EDIT: Here's some information on the topic however:
    https://technet.microsoft.com/en-us/library/cc781361%28v=ws.10%29.aspx
    http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/06/use-powershell-and-group-policy-for-your-logon-script.aspx
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

    Hi all
    Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
    Right now, our developers are using the Domain Admin account to promote their website code using MSI files.  I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common.  The
    same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
    Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
    to complete this installation for all users of the machine. Log on as administrator and then retry this installation
    The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain?  We've gone as far as explicitly giving them local admin access on this server and still
    nothing changes.
    Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
    Thanks much for your help!
    Ryan

    Hi,
    You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
    of the application for specific user.
    Description of the Software Restriction Policies
    http://support.microsoft.com/kb/310791
    HOW TO: Restrict Users from Running Specific Windows Programs
    http://support.microsoft.com/kb/323525
    How to Implement Group Policy Security Filtering
    http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Setting Crystalviewer for all users in CMC

    I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference parameter in CMC -> Allications -> InfoView, but could not find away to set the default viewer for all InfoView users to the activeX control? Is this doable? If so I would like to know how.
    Any help is greatly appreciated.

    Enable preferences and go to Infoview, click oh Preferences and change the view format to ActiveX and save it. Do this for Administrator users.
    There is download available, using that you can make the same change for all users, check the below link.
    Re: Setting the same "InfoView Start Page" to all users in one group
    With that you can change the settings for all users as Administrator, once done remove the access to Preferences.
    Thanks,
    Hari

  • Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

    Hi,
    I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
    After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
    Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
    I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines. 
    First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
    Here are my exact steps of what I did to reproduce our problem:
    Complete format of HDD in preperation for a clean install
    Clean install performed
    Set up the machine initially with a local account
    Test metro apps - all working fine
    Open control panel from the desktop, click on System, change the system to join the domain, click reboot
    Log into the system using my domain account
    Test metro apps - all working fine
    Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
    I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
    In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
    I click add and then add my domain account - also giving it administrator access
    Sign off or reboot to ensure the new security is applied
    Sign back in to the domain account
    Test metro - ALL BROKEN
    Sign out
    Sign in as local account
    Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
    So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
    Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
    could fathom was a full re install and not giving the domain user admin access to the local  machine.
    Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
    Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
    I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
    soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
    Thanks

    Hi Juke,
    Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
    I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
    your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
    in event viewer.
    Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
    information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
    Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
    Under "Applications And Services Logs" --> "Microsoft" -->  "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
    Windows.Launch contract failed with error: The app didn't start."
    If you require any further information just let me know and I will provide as much as I can.
    Thanks

  • How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

    Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
    Can it be possible to edit a mozilla.cfg file to get the same result?
    Thank you in advance for help and tips.

    AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

  • Set default password for all users including csv file

    I would like to set the default password for all users
    including the ones imported in the csv file?
    Also now the default passwrd in set to the email address. How
    do i change that setting to the "login" setting in the csv file so
    those users can loin with that password?
    Kinda the same question but do yuo get the idea?
    Thank you,
    Chip

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • How to embed fonts in document for all users

    Hello,
    we are using a custom font for our documents. I know it's possible to embed fonts in document when saving.
    Is there an option to enforce this setting with a policy?
    I cannot find the right policy in the Office Policy templates.
    We are using Office 2013 x86.
    Thanks in advance.

    Hi,
    Based on my knowledge, the option is document-based, we can't control this on the Policy level.
    If your request is to turn on this option for all new created documents. Since all new documents are based on the Normal.dotm template, a workaround is to create a new Normal.dotm template in which this option is checked:
    Browse to C:\Users\Username\AppData\Roaming\Microsoft\Templates, open Normal.dotm, tick the option and save it as Normal_1.dotm, save it in the same location.
    Then rename the old Normal.dotm to Normal.old, rename Normal_1.dotm to Normal.dotm.
    Open Word and create a new blank document, you will see this option is ticked.
    To deploy this file for all users, we can write a startup script. The process is like: 1. Remove the old Normal.dotm, 2. Copy the new Normal.dotm template from a network shared location to C:\Users\Username\AppData\Roaming\Microsoft\Templates.
    I hope the information is helpful to you.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to set mozilla firefox homepage for all users in windows 7?

    I want to set same homepage for all users in windows 7.

    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Maybe you are looking for

  • Row to Column

    Hi I have data in table like this Item_ID                  Vendor                       Price 1                             1                              10 1                             2                              20 1                           

  • Best way of making filter in report!

    I have a report! And I need make some filter tool! What is the best way to do this? Is there any APEX tools to do this? Regards, Kostya

  • RoboHelp 7 - multiple projects

    I am using the new Tech Comm suite - RH7. I was asked to do a little research on meging multiple projects. Since I have not done it before, I was hoping I could get the basics here. We have quite a few applications that will be available from a porta

  • Whats happened to file sharing apps? how do i add save files in office HD, keynote, VLC etc.....seems to have disapered in itune 11...apple why do you do this?

    whats happened to the file sharing apps after the itunes 11 update. Im trying to move files in office HD, keynote and VLC.....this was easily done in previous version. apply why do you do this? you always disapoint on updates and leave users high and

  • Bounding box problem in InDesign CC 2014

    I have a PC, am a Cloud Customer, and just upgraded to CC 2014. Have a 1000 page book finished. Went to editing. It is not broken into sections. Don't know what happened but - Opened doc to find two pages with bounding box in center. Renamed the doc