ME2N Selection parameters WE101 and WE103

Hi ,
In tcode ME2N , selection parameter field i see there two options : WE101 and WE103 .Is there any difference between these two ? In case they are same why two diffrent options r there for the same thing ??
Please help.
Regards,
Saurav

Hi,
WE101 & WE103 selection parameters available, which would decide the output of the report based several critirea like " Specifies that deleted or blocked items are to be included in list displays generated with this selection parameter"
which can be customized as per our requirement. This may be set in the following path
SPRO - Materials Management - Purchasing - Reporting - Maintain Purchasing Lists - Define Selection Parameters.
Hope this clarifies your query
Thanks,
Murthy

Similar Messages

Only 'EQ' and 'I' allowed for selection parameters

Hi!
We are generating the list of POs with open GR thru ME2M with selection parameters of WE101 and WE107, however, we encountered an error which states "Only 'EQ' and 'I' allowed for selection parameters."
What shall we do?

Hi,
This error will have nothing to do with the selection parameter setting but the variant you are defining for your ME2M transaction. Can you therefore provide detailed info on how you set it up in your system?
Cheers,
HT

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

BI: Virtual Provider for ECC Report with same selection parameters

Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.

please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand

How to identify the selection parameters of already executed transactions

Hi,
I like to identify the selection parameter of already executed transaction.
SM20 shows me which transaction was executed on which day and by whom.
But it does not give me it is executed with which kind of selection parameters.
For example, MD02/03 was executed many times, I like to know who execute it with parameter "2" for "create purchase req.".
How can I know it?
Regards,
Kenichi Kaneda

Hi,
I don't think so that SAP stores this information anywhere.

How to give Selection Parameters text in Standard SAP reports?

Hi,
I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen.
But I am not able to give text to the selection parameters.
I checked with Modification overview, its not allowing me to put text to custom Selection screen parameters.
Regards
Mohinder Singh Chauhan

Hi Friends,
I had created a dynamic selection text for a select-option created using Implicit Enhancements.
The select-option field is for MARA-MTART and the dynamic text i had given in the code is "Material Type".
But my client wants it to refer to the data dictionary reference so that it will print the labels given there and especially in the logon language.
Generally it can be done by selecting the checkbox next to the select-option, available in the Text Elements/Selection Texts Screen of the ABAP Editor.
So how to check that box(i.e., how to refer the data dictionary reference) dynamically?

Why i have to specify the parameters (property and name) in both tags?

Recently i learned how to populate a html:select with data from a DB table with a int value and a String value (value and label of an option). For that i create a business object that represent one pair value&label (i called categoryBO) and another business object that contains a list of the business objects categoryBO. So in my JSP i have the next code:
<html:select name="lista" property="listaPropiedades">
<html:optionsCollection name="lista" property="listaPropiedades" value="varValor" label="varLabel" />
</html:select> Well i understand the next: name is the name of the business object that contains the list with the objects that represents the options in the select tag; property is the name of the list object, in the business object i need to have the getters and setters for that list; then value is the name of the variable that contains the data that will be the value of each option and label is the name of the variable that contains the data that will be the value of each label.
But i have the next questions:
1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?
2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.
3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:
request.setAttribute("lista", objectThatContainsList);instead
((ActionForm)form).setListaPropiedades(objectThatContainsList);why's that? I have the same question when i'm populatina a normal html table using a logic:iterate tag or using a display:table tag from displaytag library.

Ok, you have one big misconception here - you're using the same name/property for both the select component and its contents.
The html:select should refer you to ONE selected value (in this case an int). It should tie to a field on your action form.
The html:optionsCollection should refer to a list of beans used to populate this select component.
<html:select property="selectedItem">
<html:optionsCollection name="myList" property="listOfProperties" value="varValor" label="varLabel" />
</html:select>
1. Why i have to establish the parameters property and name for bot html:select and html:optionsCollection? Why not only in html:select or only html:optionsCollection?Because they actually refer to two different things, and should be two different values.
html:options gets the list of possible values
html:select stores the "selected" option. (consider what you would have if you just used a standard html:input here, and typed the id directly in - THATS the property to bind to)
2. In the ActionForm for my JSP i don�t know what data type have to use to declare the variable that's linked with the option or with the select. I'm using Object for now.You do now - because it is declared/mapped seperately
3. Why the only way to populate the html:optionsCollection in the Action is passing the object in the request object as an atribute in the next way:Its not.
The way you mentioned is also valid. If both the "selectedItem" and "listOfItems" are properties on your action form, you can leave out the "name" attribute, and they will be found there.
However if you are dealing with request scoped beans, you will have to populate the list on each access of the page - you will need a "load" action to poupulate the bean with the items for the dropdown, and make sure that it is always populated when you return to it (eg on an error condition).
That is why setting it as an attribute is sometimes preferable.
Cheers,
evnafets

Changing generic selection parameters for Payment advice notes

Hi,
I want to add few more generic selection parameters for Automatic Payment advice notes generation on the seletion screen(f110 - rffoavis_fpaym). Please let me know the config settings for doing this.

Hi Pradeep,
you can change the sender, when you change the system-field SY-UNAME before calling FM SO_NEW_DOCUMENT_ATT_SEND_API1.
REPORT Z_TEST_SEND_MAIL.
h_uname must be a SAP-UserId.
sy-uname = h_uname.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOC_CHNG
     PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = OBJPACK
      OBJECT_HEADER              = OBJHEAD
      CONTENTS_BIN               = OBJBIN
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      OPERATION_NO_AUTHORIZATION = 4
      OTHERS                     = 99.
I tried it and it was successfull.

BOXI 3.0 Selecting "parameters" when rescheduling returns error in InfoView

All,
Fresh installation of BOXI 3.0 and application of FP2. SQL Server Express 2005 BOXI database. Default TomCat web.
Installation had no problems. Used the import wizard to import a couple of reports from previous BOXIR1 system.
I go into InfoView and "schedule" a report. I set the parameters (static, from a combobox) etc... the report runs fine. I can open the report. Everything seems normal and functional to this point.
Then I select the report again, and opt to "reschedule" from the list of actions. This opens the "Instance Title" screen as it should. However, when I then select "parameters" I get the following error :
"An error has occurred: $Proxy4"
This is our second installation of BOXI 3.0 - the first acted the same but resulted in a $Proxy5 error.
What does this mean?
Thanks!
Rob

ADAPT01113079
In Infoview schedule the report to pdf format, and once it goes to success.
Click on the reschedule option and then click on the parameter option.
The error "An error has occurred:$Proxy4" will be thrown.
Target Fix: XI 3.0 FP1
Workaround: No
There was a bug in 3.0 that was fixed in FP1 that seems to match your symptoms. You can try installing FP1. If that doesn't resolve then I'd suggest openinjg a message with support so they can verify your workflow.
Regards,
Tim

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
       screen_tab TYPE STANDARD TABLE OF screen,
       wa_screen TYPE screen,
       scrn_nm TYPE string,
       scrn_leftover TYPE string,
       l_type TYPE REF TO cl_abap_typedescr,
       typ_nm TYPE string,
       typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group3 = 'PAR'
      OR screen-group3 = 'LOW'.
        APPEND screen TO screen_tab.
    ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
    ASSIGN (wa_screen-name) TO <fs_data>.
    l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
    IF wa_screen-group3 = 'LOW'.
      SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
      TRANSLATE scrn_nm TO UPPER CASE.
    ELSE.
      scrn_nm = wa_screen-name.
    ENDIF.
    SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
    WRITE:
             / 'Screen Name: ', scrn_nm,
             / 'DDIC Type:    ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
      components_table TYPE abap_compdescr_tab,
      components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

Executing Report Painter Report in Loop With Different Selection Parameters

Hello all,
I have to execute a report painter report about 300 times, allways with a different set of selection parameters and allwasy send the result to a different person via mail.
Has someone an idea how to to this work in an automatic loop.
Thanks.

HI,
My suggestion is to discuss this with your technical team (ABAP). A Good idea would be to create a wrapper program (small program based on your report painted report code) that contains email functionality. You can then save your 300 variants and then schedule a background job for the same using transaction code SM36.
Regards

Adding selection Parameters to the POP-UP Screen

Hi my requirement is i need to add all the line items netweight and gross weight and need to show the total line items in a pop up window when i press enter after entering the line items in ME21N.
Here iam using the user exit : EXIT_sapmm06e_016 .
It is working fine But now i need to add selection parameters in this pop up window.
The two selection parametes are Shipping Point and Shipping Condition.
So how to add selection parameters in POP UP Screen and how it will be updated in ME21N Line items,.

in ur custom defined screen, you can add the selection parameter which wouldbe called within ZXM06U41.
Validate ur entries.. and you can make use of BAPI/ BDC to update those details in ME21N

Selection parameters MIR11

Dear experts,
For fiscal constraints, we need to change the "document date" when runing and posting documents in MR11, but in the selection parameter, we can define manually only the "posting date".I see that for some MM reports we can add and change some selection parameters.
Is it possible to add "document date" to the selection parameters in MR11, so that we can define it manually as we do for the posting date?
Thanks for your help.
Houda

Dear Preeti,
My problem is not related to a number ranges, but i need to define the document date manually instead of automatically by the system, like when we are booking FB01, we can define manually the document and the posting date.
To solve my issue , i think about a standard setting that may add the document date field in the selection criteria so that we can change define it manually (same as the posting date field)...
I already search in the forum but unforunately i didn't find an answer to my question.
Do you have any idea?
thanks
Houda

Dyanamic Selection of Fields and prepare internal table dyanamically

Hi,
How can we select fields dyanamically and create a dyanamic internal table for the fields created dyanamically.
like from table KNC1 if user wants data from period 1 to 3 then for the following fields (UM01S,UM01H,UM01U,UM02S,UM02H,UM02U,UM03S,UM03H,UM03U) daynamic internal table should be created accordingly.
regards,
BG

report z_dynamic.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>,
               <dyn_field>.
data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
Get_Structure Form
form get_structure.
data : idetails type abap_compdescr_tab,
       xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
      cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    append xfc to ifc.
endloop.
endform.
Create_Dynamic_Itab Form
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = ifc
               importing
                  ep_table        = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Get_Data Form
form get_data.
Select Data from table.
select * into table <dyn_table>
             from (p_table).
endform.
Write_Out Form
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
    do.
      assign component sy-index
         of structure <dyn_wa> to <dyn_field>.
      if sy-subrc <> 0.
        exit.
      endif.
      if sy-index = 1.
        write:/ <dyn_field>.
      else.
        write: <dyn_field>.
      endif.
    enddo.
endloop.
Dynamic Select Statement
check this code...
For dynamic table name....
REPORT demo_select_dynamic_database .
DATA wa TYPE scarr.
DATA name(10) TYPE c VALUE 'SCARR'.
SELECT *
INTO wa
FROM (name) CLIENT SPECIFIED
WHERE mandt = '000'.
WRITE: / wa-carrid, wa-carrname.
ENDSELECT.
For dynamic field list
REPORT demo_select_dynamic_columns .
DATA: itab TYPE STANDARD TABLE OF spfli,
            wa LIKE LINE OF itab.
DATA: line(72) TYPE c,
list LIKE TABLE OF line(72).
line = ' CITYFROM CITYTO '.
APPEND line TO list.
SELECT DISTINCT (list)
INTO CORRESPONDING FIELDS OF TABLE itab
FROM spfli.
IF sy-subrc EQ 0.
LOOP AT itab INTO wa.
WRITE: / wa-cityfrom, wa-cityto.
ENDLOOP.
ENDIF.
regards
vinod

ME2N Selection parameters WE101 and WE103

Similar Messages

Maybe you are looking for