Me32K - Need to change the mail subject line, attachment name

Hi,
can u please throw light on the below three points which needs to be achieved.
1. Subject line of the mail needs to be modified from standard to "PO# XXXXXXXXXX".
2. Attachment name should be updated from stanadrd to "PO_XXXXXXXXXX".
3. Also by default mail will be delivered to the default id, but it should be delivered to multiple mail ids maintained in the vendor master.
I should achieve the above by user exits or by Zprogram copying from th standard.
Please advise me.
Thanks a lot.
Regards,
Kiran

check in Tcode: NACE, what is the current driver program and form against your document type.
and then change accordingly

Similar Messages

HT204161 I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

I bought an IMac 27 on craigslist and I need to change the Apple registration to my name. How can I do it?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

Change the message subject line at runtime based on system id in RSWUWFML2

I need to display different subject line based in the system id. I am using 'FM for Preparatory Phase' where in, am changing the message number based on system id. But it doesn't works, and the msgno remains the same...
Can anybody suggest how to acheive this???

I can also use different messages in different systems but I just wanted to know if there is something we can do with this user exit option present in the selection screen of RSWUWFML2 or not ?

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send. How do I do this?

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send so that people reply to my email alias not the address where my emails originate. How do I do this?

So you have added a new 'Identity' to your existing email address.
If someone sends an email using that 'other identity'
you have a choice of where those received emails can go. they can be received into the original mail account, like a collect all in the one Inbox or perhaps sent to Local Folders, so you can see them as separate. Or you can filter on that identity to put those emails in a specific folder.
When you REply to any incoming mail that has used that new identity email address, it will use the new identity in the Email address in FROM assuming the received email in the main mail account of which the new identity email is applied.
This should also now offer the added identity email address as an option in the FROM drop down list. So you can easily swap when sending an email if required.
If you want to send using your default email address to people, but want their reply to use the identity email address:
Tools > Account Settings
select the original email address mail account name
Where it says: 'Reply to addresses: enter the reply to identity email address.
click on OK
This means when they click on 'Reply' it will auto insert the Reply-to option.
This will work providing it is a 'Reply' to an email you sent which contains the Reply-to email address.
If someone is not actually replying by using the Reply-to new identity email address:
In other words they are sending you a new email using the original email address because perhaps that is the one in their address book or the one they located on a webpage etc.
Then, when you select to Reply to that email, it will use the email address to which it was sent to in the FROM field - the original email address. Hence why you would need to select the new identity FROM in the drop down list.
One way to get around this is set out below.
If you do not use an identity - instead you create another existing mail account for the 'identity' email address, so you have two mail accounts for the two email addresses.
You can move selected emails manually or perhaps using a filter to screen them from the original mail account into the newly created mail account.
Then when you click on Reply, it will use the new mail account email address instead of the original email address.

My ISP tells me I need to I need to change the port to send/receive e-mails, but I can't remember my Mail password to add an account. How can I proceed without the password?

My ISP tells me I need to change the port to send/receive mail, as the current port is going to be disabled for security reasons. But I can't remember my Mail password to add an account. How can I add an account when I don't remember my password? It's been several years.

your email password is with your ISP so they can help. but if it is saved in the email app you can just change the ports in the preferneces without a password.

HT5621 I need to change the email address associated with Icloud. My provider has changed. I have looked at the directions to do this,but my old email is still coming up. How do I change the address to the correct e-mail?

I don't want to change my Apple ID, I just need to change the e-mail address that is attached to my icloud account. I changed the Apple ID to my new e-mail, but icloud still has the old address.

Did you get a resolution to this? I have the same problem.

I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER

I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.com

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111384)

Need to change the date of joining of employee

Hi All,
I have gone through some threads similar to this subject an also tried to do changes from PA41 but i am facing some problems during the procedure.
We have transferred some employees to sap system with their original date of joining and payroll was run from some other date for those employees. So i need to change the date of joining of those employees.
For example : Below is the line items of one employee from table infotype 0.
End date Start date Changed on
22.02.2009 19.02.2007 19.02.2009
31.03.2009 23.02.2009 19.02.2009
31.12.2009 01.04.2009 14.10.2009
31.12.9999 01.01.2010 21.01.2010
Payroll was run from Feb-09 onwards and i want put date of joining for this employee as 23.02.2009.
I want to know which date i need to change??...When i am trying to change the first start date i.e. 19.02.2007 to my desired start date, but it is not allowing me to do that as end date is smaller.
Please tell me how would i change the joining date of employee as 23.02.2009 ?.
Thanks.

Try this
22.02.2009 19.02.2007
31.03.2009 23.02.2009
31.12.2009 01.04.2009
31.12.9999 01.01.2010   take this record form PA30 IT0000 Over View (Shif + F8) Copy that record and change the Start date
as 2302.2010 so another record will be created
22.02.2010    01.01.2010
31.12.9999    23.02.2010
Just try and let me know

Problem reading japanese mail subject line

I am using
javax.mail.Message.getSubject() method to read the Japanese subject line of the mail, but when i see the string returned by this method, it has some junk characters.
Can anyone please tell me how to read japanese subject line?

Hi Pothana,
I did try to change the encoding of the Exchange server to UTF-8, but there was no difference in the result.
Note that this problem is only in the subject line. If I send the same text in the content it is received correctly.
(Changing the encoding of PI is not an option... I do not have access to the Visual Administrator).
@Ninad since I am taking the Subject from the ASMA (as suggested by SAP) I don't think that changing the content encoding of the message would make a difference.
@Ashutosh I do have that document but I can't find anything that can help me in there. Do you see anything that could help resolve this specific issu?
In the mean time the problem is still there...
Thanks for any additional help you can give me,
Aldo

Change outgoing mail subject

Hi Guru's,
I need to change the subject of the outgoing standad mail template dynamically by the comlaint id which i get it through the refernce field of the mail.
or is there any way through which the refernce id can be copied in the mail subject.
Thanks,
regards,
akshay ruia.

settings - mail - account - outgoing mail server

BADI to change the email subject

Hi all,
Which BADI can be used to change the subject of the email when a SC is created??
I tried using the BADI "BBP_OFFLINE_APP_BADI" and the implementation "MAIL_DATA_GET" but it is not getting reflected in the mail..
Am I using the right BADI or is there someother BADI that may be helpful??
Please help..

Hi Mary,
I have a similar issue where in i need to change the subject of the outgoing mail with the refernce / or some id in crm cic.
can u please guide me the way to move forward with the issue.
i would be really helpful.
Thanks,
Regards,
akshay ruia.

WRITE_FORM_LINES. Need to change the style when printing in the SAP Script

Hi Experts,
I am using the WRITE_FORM_LINES function module to write a list of numbers.
But I need to change the font of the numbers when printing it.
I have changed it_header-tdstyle = 'S_DOCUS1'...SAP standard one but I need to create my own style.
I have created using SE72 and has given my own defined Character and Paragraph formats.
when I pass through the function module there is no change in it.
I think I need to create a text object is .. Can any one explain me hw to create a text object
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db827494511d182b70000e829fbfe/frameset.htm
   CALL FUNCTION 'WRITE_FORM_LINES'
          EXPORTING
            function                 = 'APPEND'
            header                   = it_header
            window                   = 'MAIN'
          TABLES
            lines                    = it_serial
          EXCEPTIONS
            function                 = 1
            type                     = 2
            unopened                 = 3
            unstarted                = 4
            window                   = 5
            bad_pageformat_for_print = 6
            spool_error              = 7
            codepage                 = 8
            OTHERS                   = 9.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
Waiting for u r replies...
Thanks,
Chaithanya K

In se75. go in change mode and click create button in application tool bar.
Now text object is something to which a text is attached, like, a material or a Purchase order etc.
Text format is like rich text format or plain text depending upon which an editor is invoked
Specify Editor application. SAP provides standard Editor application choose from one of them(TA or TN)
Line width
This attribute determines the line width to be used for this text in the text editor. A SAPscript text line may consist of up to 132 characters.
Save mode specifies how a text is saved in
dialogue task
When calling the corresponding save function, the system immediately writes the text module to the text database.
in update task
All changes to the text modules of a transaction are stored intermediately in a buffer. Only when the application object is updated does the system write the texts to the log file and, in the update task, stores them in the text file.
For not in text file
You can use SAPscript to edit texts that are not stored in the text database. In this case, SAPscript only returns the changed text table to the application program, which is itself responsible for storing the text

E-mail subject line truncated to 50 characters

Hi,
While sending E-mail from workflow the E-mail subject line truncated to 50 characters. Already we are having Note 958426 with our patch SAP_BASIS - SAPKB70011. How to rectify this?
Regards
Sam

Sam,
We are on SAPKB70012 and are having this problem too. Have you been able to resolve this? If so, how?
Thanks!
Paul

IPad Mail Subject Line

Every time I compose an email without a subject line a warning comes up and says "The Subject Line is empty, do you still want to send" is there a way to avoid this warning every time I send an email??
Thanks

I am wondering the same thing Glboater. I have AOL email set up on iphone 4S and ipad 1 and it asks me that same stupid question every time I try to send an email. It is not an AOL settings issue as far as I can tell -- at least, I haven't found any such settings when I go to my AOL account online. Yet, I see nothing in Mail Settings on either device that relates to this.
If this is a built-in default that can't be overridden, it is utterly idiotic -- even Outlook doesn't make you pause to see if the stupid subject line has been filled in. Someone must know what the deal is here. I believe it was happening before IOS5 updates.

I have recently given away my old mac air to a friend. I want to change the mail settings so he can access his emails and not access mine

I recently gave my old mac air (purchased new 2011) to my friend. I want to change the mail settings so that he can access his mail from the application and not mine. So far we have gone to mail then preferences then general and changed the email address to his but upon relaunching the mail application, it didn't seem to have worked. The mailbox was empty of either his or my emails. Ali

Follow these instructions: What to do before selling or giving away your Mac.
Your friend will need to install his own OS X system as weill as purchase his own App Store software. He/She cannot use yours. Since the machine has been wiped your friend can configure his/her own Mail account.

Me32K - Need to change the mail subject line, attachment name

Similar Messages

Maybe you are looking for