ME41 Header
Dear all,
I have already do my recording to ME41. I have problem to the screen with header information. THe fields is not filled with the data i pass. But when i press F1 and exit, i can see the screen field is filled with my passing data. Why is this happen?
Please assist. TQ
Hi Sarimah,
I face some problem in ME41 recording, could you pls tell me how you did recroding??
When try to do recroding, from the first screen after keying in the RFQ type, QUotation deadline, purch org, group it pops up to enter company code and once i enter company code it take me to next screen where i can fill in all other details like collective number, validity start date and validity end date. these 3 fields are mandatory in the second screen, but the problem is when i enter into second screen i get an error "make entry in all required fields". When i process my reocrding, it stops here. Could you pls help me??
Similar Messages
-
RFQ Header consition inclusion
Dear Experts,
I've created a pricing procedure for domestic, defined, respective schema determination.
While creating PO, all the conditions are flowing correctly. Also i can add condition values at header level also.
But while creating RFQ, if i tried to enter some condition value.. the system not allowing to enter conditions screen itself.. it is giving the error as
" Not possible to determine a condition type
Message no. 06658
Diagnosis
The system was not able to find a condition type for the item. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG): Define calculation schema '"
But i can able to enter conditions for item level.. please provide me the solution for the same.. for accessing conditions of RFQ at Header level.
FYI, i've checked RFQ in IDES, i can able to enter conditions.
Thanks in advanceHi,
Since RFQ is a time-dependent purchasing document so it is not allowing you to enter the Header Condition types in ME47.
To cross-check it, go to SPRO > MM > Purchasing > RFQ/Quotation > Define Document Types > here for your RFQ Document Type, check "Time-dependent" indicator will be active. Just remove it once and then try by creating a completely new RFQ in ME41 and then maintain the Quotation in ME47. It will allow to enter the Header conditions.
But, it is not suggested to do so. -
TCode - ME41 - Get Service Level Data
Hi all,
I am working on screen exit for RFQ Creation through T-Code u2013 ME41 and using enhancement - MM06E005. In one scenario I am facing problem, It goes like this:
We are creating RFQ with ref to PR and adopting line items from it. If we are using PR created for materials its working f9 but when we are adopting PR for Services in RFQ, I am not able to get service level data in any of the exiting available exists of Enhancement - MM06E005. I guess this Service level data is stored in table u2013 ESLH (Service Package Header Data), ESLL (Lines of Service Package). As no reference structure or table available in Exits so I am not able to get this data. Is there any way to get this data. Is there any class or object available ?u2026.. Please adviceu2026..
Thanks & Regards,
Rajeshits done
-
Hi experts,
Is it possible to use LSMW thorugh recording For ME41(Purchase Quotation)tcode for multiple items?
if so how to do it? please explain how lsmw work for multiple header and multiple items in one legacy text file.
Thanks & Regrads,
RaoHi,
correct me if i am wrong here, are you telling me you are not able to fill items more than what the screen is able to display in the table control.
if that is the case why dont you use NEW button the application toolbar, so no matter how many items have already present in the RFQ, the table control will position the new item in the second line. So to add a new item click the new button and add the item at the second line, this should solve your problems no matter how many items need to be created.
In recording when u record it for adding one item, you need to loop at your table containing the indicator of item type and call the code repeatedly to add all items.
Hope that throws some light, let me know if you need some more details. -
ME41 Tcode Screen Modification
Hi all,
I have got a problem with Creating RFQs. The thing is that if i press enter after inputing Quotation Date, Purch. Org. and Purch. Group with out entering RFQ then it takes me to the screen "Create RFQ : Header Data".
Instead of going there i need to goto "Reference to PReq" Dialog Box. This is a button present in me41.
Simply i just want to goto Header Data for RFQ, i want to goto Refernce Dialog Box then to Header Data.
What should i do, i saw some enhancements but i dont know how to do it.
plz help.
Thanks,Hi,
Take look on this link and you will understand how to do it!
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/1e/728d281d5e11d289d30000e82158f1/content.htm
Best regards,
Daniel Kiel -
Hi all,
I have got a problem with Creating RFQs. The thing is that if i press enter after inputing Quotation Date, Purch. Org. and Purch. Group with out entering RFQ then it takes me to the screen "Create RFQ : Header Data".
Instead of going there i need to goto "Reference to PReq" Dialog Box. This is a button present in me41.
Simply i just want to goto Header Data for RFQ, i want to goto Refernce Dialog Box then to Header Data.
What should i do, i saw some enhancements but i dont know how to do it.
plz help.
Thanks,No Other Screen Exits are available. In AMPL000, screen exits are available for Item Level. for this screen exit u have to insert the field in teh structure CI_AMPL. and activate the structute also.
in this case u activete screen exit, CI_AMPL structure and EXIT_SAPLMBAM_001, EXIT_SAPLMBAM_002.
- Selva -
hi,experts..
i have implemented screen exit in me41,added five fields and i want to that fields to be in display mode in me43..i have observed that pbo module is not triggered at all to use loop at screen. so, ow can i display fields in me43.
thanks in advance.Hi Anand,
No need to use statement loop at screen as i mentioned in my above posts that above mentioned enhancement point exist inside standard LOOP AT SCREEN...ENDLOOP.
Just Write below code inside your implementation and see whether program is stoping there or not.
if screen-name = 'EKKO_CI-ZZDESCRIPTION'.
BREAK-POINT.
SCREEN-INPUT = 0.
ENDIF.
secondly where you added custom fields i mean header or items
If header then try to create implementation against enhancement point mentioned belowgiven in below mentioned include and write your code.
Include - MM06EO0M_MODIFY_SCREEN
ENHANCEMENT-POINT MM06EO0M_MODIFY_SCREEN_01 SPOTS ES_SAPMM06E.
BR,
Vijay
Edited by: vijay vikram singh on Dec 4, 2011 7:33 PM -
dear all
i have configured free goods,in the order the cost is coming for free goods at item level and it is not adding to the header cost total.
for eg:i have 2 items and 1 free item.costs r 300,400,500 respectively.
in the header it is showing only 700 as cost.
i observed the inventory doc is posting correctly with 1200(which includes free goods cost).
can anybody tell weather it should add up or not and how it can be done??
thanks
reddyDear Yugandhar
Check
SPRO->Sales and Distribution->Basic Functions->Free Goods->Control Free Goods Pricing->
Control Pricing For Free Goods Item Category you will find statistical value
or in VOV7 below pricing you find statistical value
Statistical values
Indicates whether the system takes the value of an item into account
when it determines the total value of a document.
There are three options
System will copy item to header totals
X No cumulation - Values cannot be used statistically
Y No cumulation - Values can be used statistically
Check if it is initial for your item category
Standard for TANN is initial and pricing is B Pricing for free goods (100% discount)
Do give your feedback
Regards
Jitesh -
Resetting Header and Footer in RTF templates
Hi,
I developed an RTF template (template 1). This template contains start:body and end body for printing the header and footer in all pages. After printing this template then i have to call another template(template 2) from this. I called the template (template 2) using call statement. But the probelm is that the header and footer of template1 is printed in the output of template2 .
I dont want to print this header and footer for template 2. Can anyone please suggest me in doing this. I placed start:body and end body in the second template with the assumption that 1st template's header and footer will be overwritten. But if i preview then am getting the error
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\kpoda\Desktop\Invoice Printing Efficiencies\Sample XML Data\Sample Output4.xml
FOProcessor setLocale: en-us
each
Please sugget.
ThanksHi,
Do you have two templates (template1 & template2) that you want to display in the same document where the pages for template1 has one set of header and footers; and template2 has another set of header and footer?
If that is the case you can simply create a new section in your rtf template so you have section1 and section2.
In the body of section1 you call template1 and template2 in the body of section2.
You can then have different header and footers for the two templates in the same document.
BR Kenneth -
Header information not getting displayed in the lines
Hello Everyone
I have a very basic question - its very simple but not working for me with so many attempts
My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES.
IN this lines table I need the SHIP_CUSTOMER_ID of the header to be displayed. I have tried all options like <?../SHIP_CUSTOMER_ID?> or <?../G_ORDERS/SHIP_CUSTOMER_ID?> , however nothing seems to be working and I am not getting the field to be displayed. Can someone please help?
XML structure is as follows:
<XXSTOL_29251_PICK_TKT>
<LIST_G_ORDERS>
<G_ORDERS>
<CUSTOMER_NUMBER>1411</CUSTOMER_NUMBER>
<SHIPPING_INSTRUCTIONS1></SHIPPING_INSTRUCTIONS1>
<SHIP_CUSTOMER_ID>256</SHIP_CUSTOMER_ID>
<G_LINES>
</G_LINES>
<G_LINES>
</G_LINES>
</G_ORDERS
</LIST_G_ORDERS>
</XXSTOL_29251_PICK_TKT>Are you grouping within G_LINES? If so, use ../../SHIP_CUSTOMER_ID
or send me the xml and RTF template to [email protected] so that I can get a better look at the data structure and try to help.
Thanks,
Bipuser -
Header not getting displayed in the next page in the second table
Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin HadaHi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL. -
Heading is not getting displayed in the workbook
Hi,
My requirement is i need the heading of the query to be dispalyed in the workbook,
when i execute the query i do get the title of the query but when i insert the query in the workbook,i do not see the title.
could you please help me.
thanks,
apparaoHi,
Open a query in Excel analyzer and click Save as workbook button(to save as a workbook). The query name should come as a title.
Regards,
Senthil Kumar.P -
Creating a custom report with detailed header and then associated detail
I am very new to CRMOD, so this question may be basic, but I have not found any good material yet to help me out, so here goes.
We are trying to create a Quote report that will be sent to our customers. The report needs to have both a header and detail section basically as follows:
<Header>
Quote Form
Date:
Expiration Date:
Sales Person Name:
Customer Name and address
Terms
... some other text data ...
<Detail>
Standard fields that define the quote, these are easy.
What I cannot determine how to do is create the header section. In the report designer, it only allows for a Title, logo, and another text line. Can anyone suggest another method?I do not have the narrative option.
Options available are:
Title
Table
Chart
Pivot Table
Gauge
Active Filters
legend
Advanced
--> Column Selector
--> View Selector
--> Funnel Chart
--> Ticker
According to the documentation, the narrative view should be available from the advanced menu. Am I on a different package by chance? -
In ALV Report output heading is printing twice.
Hi Experts,
Im working on ALV Reports.
Im printing header text by using listheader and commentary write function module.
the problem is when i sort any column in ALV ouput the heading is printing twice.
Again if i sort the column the heading is printed is 4 times.
so if anybody knows the solution how we can avoid repetition of heading ,
Please reply me as soon as possible.
regards
Imrangs.Hi Noorie,
Thanks a lot.
Your answer is perfect.
Bye.
Regards,
Imran -
How to add header and fooder in text file
Hi,
i have created simple application for generate report from database into text file.
But i need to add header and fooder in text file. I dont know is there any API for adding these.
Can anyone help me to create header and fooder in text file.
the below text are needs to be print in the header
name of the table :
Recorder type :
file creation time:
the below text are needs to be print in the footer
Recorder Number:
Record Type;
the actual code is
pst = con.prepareStatement("select REQUEST, DOMAIN_NAME, TRUNC(DATE_OF_CONFIGURATION) AS dateofConfig FROM employee where id=300");
rs = pst.executeQuery();
while (rs.next()) {
request = rs.getString("REQUEST");
domain_name = rs.getString("DOMAIN_NAME");
dateofconfig = rs.getString("dateofConfig");
System.out.println(request + " " + domain_name + " " + dateofconfig);
data.add(request + " " + domain_name + " " + dateofconfig);
System.out.println("before calling method");
writeToFile(data, "c:/Employee.txt");
System.out.println("file created successfull");
rs.close();
pst.close();
private static void writeToFile(List list, String path) {
BufferedWriter out = null;
try {
File file = new File(path);
out = new BufferedWriter(new FileWriter(file, true));
for (Object obj : list) {
String s= obj.toString();
out.write(s);
out.newLine();
out.close();
} catch (IOException e) {
}Thanks
Jasmin
Edited by: user13836688 on Mar 21, 2011 4:06 AM
Edited by: user13836688 on Mar 21, 2011 4:07 AM
Edited by: user13836688 on Mar 21, 2011 4:08 AMuser13836688 wrote:
i have created simple application for generate report from database into text file.First off, when posting code, use [code]...[/code]. or '' tags, not '<code>'.
But i need to add header and fooder in text file. I dont know is there any API for adding these.
Can anyone help me to create header and fooder in text file.Well you plainly have the code to write the file contents; and furthermore your report seems to be contained in a List called 'data'. Why not just add the header and footer lines to it? I'd also suggest making 'data' a LinkedList. That way you can add the header afterwards with no performance hit, just in case the information it contains isn't available at the start of your report loop.
Winston
Maybe you are looking for
-
SD PRICING: How to identify the last call of a Condition Value Formula
Hello Experts. I'm working on a condition value formula, and because a Group Condition, I need to do a calculation in the last call of the formula. The formula is called 5 times and I couldn't identify any flag to diferentiate the last 3 calls. I co
-
F4 help based on another column value in SM30
Hi All, I have two fields in the view to maintain in SM30. The second field possible values are dependent on the first field value. View has two fields - Feild1, Field2. Field2 value table is varied based on what is filled in Field1. I have created P
-
Upgrading from 10.4.11 to 10.5.7 possible?
I have two computers: -13-inch MacBook Pro (2.25 GHz Intel Core 2 Duo, 2 GB 1066 MHz RAM, OS 10.5.7) -15-inch MacBook Pro (2.16 GHz Intel Core 2 Duo, 1 GB 667 MHz RAM, OS X 10.4.11) I am trying to upgrade my 15-inch MBP to Leopard with the OS X Insta
-
How to revert the changes in SAP BI based on a particular user and date
Hi I am new to SAP BI. I have installed the info objects from business content by choosing the option select necessary objects while installing the DSO 0PM_DS04. But later i came to know that some of the infoobjects are customized. But after the inst
-
Excise calculated at migo is wrong
hi friends. i have maintained tax code for 8%, 2%, 1%, for bed, ecess, and secess respectively and 4% vat the Bed calculated at migo is wrong, it is calculating little more, what is the procedure to rectify this, please give all respective hi