ME41 - Output message not created

Dear all,
I must send RFQ by mail. I have used the same configuration of message as purchase order (that works fine).
In RFQ I have this problem: it doesn't create the message. If I see messages screen, I don't see the line with my message.
If I go in 'determination analisys' I see that the output is found!
Help me, please.
Marianna

Have you maintained condition entry in MN01 ?for Rfq.
If not maintain the condition record to trigger automatically.Check the condition is green in determination analysis.If it is not green then you have to maintain condition record in MN01 as per access sequence

Similar Messages

  • Partner function copied from PO to Outb.del. but output message not created

    Hello Gurus,
    As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
    My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
    Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
    after the manual save?
    Kind regards
    Chris

    I have just explained this in Copy partner from PO to inbound delivery

  • Output message not generated for Purchase order

    We maintain MN04 message condition record for  2 key combination for output type NEU:
    1. Purchasing Output determination : Document type  -> NB, medium 1 print out
    2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
    When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
    Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
    Please help me with this situation. we need setup the email PO functionality.

    I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout  and ZNEU for medium 5 email. done all steps mentioned in the links.
    When create a PO still only 1 message record NEU is defualted for printout only.
    The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

  • Output message not coming automatically for PO

    hi
    i cerated new output message sending PO to vendor by e-mail. I maintained condition records in MN04. Condition table, access sequence all are maintained. I included new output type into the control data of the existing schema RMBEF1 and the schema is assigned to PO also. Also maintain entry in following string   SPRO- Material Management-Purchasing-Messages-Output control-Message Types-Define Message type for PO---Fine-Tuned Control: Purchase Order
    Still the output message is not coming automatically while creating PO  every time i add output type namually.  please guide
    regards

    Hope you have maintained condition for combination. preferrably -
    1) Purch Doc type > PORG > Vendor
    2) Please make sure that, you have maintained the fileds which are relavant for output.(if you are making any changes in existing PO and you need output)
    Hope this will help you

  • Prevent the Output Message when creating PO from inbound IDOC

    Hi SAP Gurus,
    In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
    Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
    I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
    In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
    Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
    I'm new in MM and really need help!
    Thanks,
    Elaine.

    Hi Vinod,
    I really appreciate your anwer. I'm going to explore this with my functional consultant.
    Just like to have more questions:
    1. Is it easier if we change the existing condition table instead of creating a new routine?
    2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
    3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
    Thanks again.
    Regards,
    Elaine.

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • Service Message not created in 4.6c

    Hi all
    We are using SLM 3.2. I am facing problem in creating support message from satellite system (4.6c) it returns the following error:
    Error in local message system: Function module   
    "/SAPSMOSS/06_CREATE_R3_NOTIFIC" n Message was not created
    Kindly give me the solution
    Thanks.

    Our satellite system configuration is:
    Basis support package level is 27 (release 46C)
    ST-PI Release 1.00_46C level 0000
    Entries of BCOS_CUST are:
    column1         column2     column3     column4          column5
    OSS_MSG     S          SLM     CUST31H          1.0
    Any suggestion

  • Scenario Message not created

    Hi,
      I am doing File to IDOC scenario. The source file
    adaptor  is showing "Functioning" in "CC Monitoring"..
    But in Message Monitoring the Message is not created.?
    thx
    Mukharji.

    Hi Mukharji,
    Use this link and check the log of your FILE adapter.
    http://<host>:5<nn>00/AdapterFramework/monitor/adaptermonitor.jsp
    Mickael

  • EDI message not created because ALE_SERIAL_CHANNEL_GET fails / table TBD56

    Dear experts,
    I am trying to create an Idoc in SAP ECC 6.0. To my knowledge, all EDI/Idoc settings have been done correctly but for some reason the Idoc is not being created.
    Functionmodule ALE_SERIAL_CHANNEL_GET returns an error; it can not find an entry in TBD56.
    Where (which transaction) do I have to fill settings so this table is being filled?
    Thanks in advance,
    William

    Hi Isaac,
    Please create Bapi using your repective Progamme and try to give the Resepective conditions related to pricing from XML file.as you are saying you are doing this for testing.hope aware that while creation of BAPI if the certain condition are not matching or if the data is incomlepte you will get this kind of errors.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Output message can not be created in a PO

    Hi to you all,
    Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
    I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
    Do you know how and why this can happen? Is it a program error or something else?
    Thanks.
    Esra

    Hi Esra,
    if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
    In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
    Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
    Just my 2 cents
    Alicia

  • Sales Order - Output message

    Hi All,
    I would like to know is there anyway the output message be created once i create a sales order? At the moment i have to manually enter the Output message type & only then print.
    Hope my question is clear.
    Vivek

    Hi
    Please do following checks.
    1. Output requirement in output determination (Tcode NACE) should not anyway restrict output to propose if all things are fine.
    2. Some times standard requirement routines have check that if change transaction is there ie. VA02/VL02N/VF02 the o/p is supressed. Pls. check this if this is needed.
    3. If the o/p is a print o/p, check the communication is maintained in VV11.
    4. If the o/p is email, then do maintain the customer master email text fields correctly.
    5. If there is a EDI message, then do maintain partner profile in WE20 correctly.
    6. Also maintain VV11 correct condition records.
    All above will surely ensure that when order is created o/p will be proposed.
    Furthermore the processing of o/p can be defined at 4 levels which can be decided according to process you want to follow.
    Hope this is helpful. Reward points accordingly.
    Kind Regards
    Sandeep

  • Where used report for output message routines

    Hi folks,
    we are running a multiclient ERP system and actually we are having many many output message routines created like RV61B961. Is there an easy way to figure out, if this routines are still in use? I need to reduce the amount.
    Thanks for any help, Stefan

    Hi,
       You can get the routines which are in use, from table T683S.
       T683S - KOBED will give you the routines in use against the procedure and application. You can download the list from each client and get the consolidated list.
    Regards,
    AKPT

  • Output type not proposed in Message Control when PO is created

    Hi,
    DETAILS
    I have set up the system to send a IDOC when a PO is created. I have done the following settings in the system to send the IDOC using the message control functionality in the PO creation screen.
    1). Created a new output type ZNEU which is an exact copy of NEU output type provided by the SAP system.
    2). Assigned the new output type to the output determination procedure.
    3). Enabled the new output type ZNEU for ALE distribution.
    4). Maintained the condition records in the system for the output type ZNEU such that for the P org, endor and Docmuent type combination the output shall be proposed.
    5). Maintained a partner profile( Logical System ) and assigned the output type ZNEU to this partner profile.
    6). Created a Distribution model for Sender ~ Receiver for ORDERS message type.
    PROBLEM
    When i create a PO the new output type is not getting proposed by the system. I am not sure why it is not getting porposed in the message control.
    I tried to manually enter the ZNEU output type in the system to see if the system is accepting. I am getting an error
    Partner % does not exist for partner function LS
    Any idea what i am missing? Am i missing any configuration or am i doing something wrong?
    cheers

    The output is not being proposed automatically is becuase you are missing "Condition Records" for the output type ZNEU.
    Go to NACE.
    Select EF - Purchase Order
    Select "Condition Records"
    Select ZNEU and select condition records
    Now, system will bring the combinations of access sequence. Maintain appopriate record.
    This will enable you to get the output type automatically in the purchase order.
    Regards,
    Naimesh Patel

  • Output Message for Purchase order not being created Automatically

    Hi all,
    I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
    Message no. 06261 - No message generated for output of purchasing document.
    Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
    - Regards
    Sahar Khalid

    Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

  • Getting sucess message as output could not be issued after the printout

    hi,
    in the Transacation VF02 i want to print my Z smartform.
    so in the NACE transaction i have copied the RD00 and created Z entry and the Zsmartform.but the After printing the smartform i am getting the success message in the bottom of the screen as output could not be issued.but i should get the message as output is issued succesfully since i got the print.
    pls suggest me

    Hi shantha,
    i suppose it will solve if u will debug that object.
    Reply for queries. shal post the updates....
    Regards,
    Kumar.

Maybe you are looking for