ME41 Tcode Screen Modification

Hi all,
I have got a problem with Creating RFQs. The thing is that if i press enter after inputing Quotation Date, Purch. Org. and Purch. Group with out entering RFQ then it takes me to the screen "Create RFQ : Header Data".
Instead of going there i need to goto "Reference to PReq" Dialog Box. This is a button present in me41.
Simply i just want to goto Header Data for RFQ, i want to goto Refernce Dialog Box then to Header Data.
What should i do, i saw some enhancements but i dont know how to do it.
plz help.
Thanks,

Hi,
Take look on this link and you will understand how to do it!
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/1e/728d281d5e11d289d30000e82158f1/content.htm
Best regards,
Daniel Kiel

Similar Messages

Data hidden by Screen Modifications

Hi All
I am modifying TCode PA30. Some fields & 2 table controls are added in new screen.
When displaying the data, only the data of the fields are getting displayed but data of table control in not displayed.
Instead a message in Status Bar is showing "Data hidden by Screen Modifications".
Any suggestions.?
Regards.

Check
the Screen Modifications ONCE
in V_T588M

Creation of alternative screen in screen modifications

Hi,
I have a problem in screen modifications.
I want to make PERSG(employee subgroup) field as editable in IT0001 (currently it is grey field).
For that I want to go through screen modifications for IT0001 using table T588M.
There how do I create new alterantive screen.

I think you are using Tcode PA30 to change the ESG.
You need to use Tcode PA41 to do changes, No need of doing any screen modifications
Warm Regards

Selection screen modification based on various buttons in selection screen

Hi,
I have 1 query related with Selection screen modification.
In my Report Program,I have created GUI Status for my selection screen
Now 2 buttons in application toolbar are coming on selection sceen.
For this i used,'At selection screen output' event.
And there are 2 blocks on selection screen.
If user press button1 then block2 should not display.
and if user press button2 then block1 should not display.
but the problem is i m not getting reqd result and also while doing debugging its not showing me sy-ucomm value.
Any pointers on this.
Thanks,
Mamta

Hi Mamta,
   have it in a group then you can write code accordingly see sample example,
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS       : p_r1 RADIOBUTTON GROUP rad
                        USER-COMMAND clk DEFAULT 'X'.            " upload Radio Button
SELECTION-SCREEN COMMENT 5(35) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 001 WITH FRAME TITLE text-001.
PARAMETERS: p_upl       LIKE rlgrap-filename MODIF ID a           "Upload File
                         DEFAULT 'c:\temp\parbmat.xls',
            p_werks     like t001w-werks MODIF ID a,              "Plant
PARAMETERS: p_rest      LIKE rlgrap-filename MODIF ID a           "Dwonload File Path
                         DEFAULT 'c:\temp\Success.xls'.
SELECTION-SCREEN : END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r2 RADIOBUTTON GROUP rad.
SELECTION-SCREEN COMMENT 5(35) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 002 WITH FRAME TITLE text-002.
PARAMETERS     : p_plant LIKE marc-werks MODIF ID b.                "Plant
PARAMETERS     : p_lgort LIKE mard-lgort MODIF ID b.                "Storage Location
PARAMETERS     : p_vkorg LIKE mvke-vkorg MODIF ID b.                "Sales Organization
PARAMETERS     : p_vtweg LIKE mvke-vtweg MODIF ID b.                "Distribution Channel
SELECT-OPTIONS : s_mat FOR mara-matnr MODIF ID b.                  "Material No No
SELECT-OPTIONS : s_dat FOR mara-ersda MODIF ID b.                  "Date on Record Created
PARAMETERS     : p_down LIKE rlgrap-filename MODIF ID b
                  DEFAULT 'c:\temp\Material Master.xls'.           "Download File Path
SELECTION-SCREEN : END OF BLOCK 002.
AT SELECTION-SCREEN OUTPUT.
*Inactive Fields depending on the radio button
LOOP AT SCREEN.
    IF p_r1 = 'X'.
      IF screen-group1 = 'B'.
        screen-active = 0.
      ENDIF.
    ELSEIF p_r2 = 'X'.
      IF screen-group1 = 'A'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Edited by: suresh suresh on Jul 28, 2009 12:42 PM

How to add new field to Screen Modifications

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Hide "Administratior" in IT 0001 through screen modification

Hi Gurus,
I have requirement where client wast us to hide Administrator section which have three administrators field from IT 0001. Please help me to understand that is it possible through screen modification.
If not then what is the other solution?
Regards,
Amit Jain

Hi Subhash,
FIrst go to the IT001 screen... go to SYSTEMS -
STATUS and get the program name and screen number
then on
Go to SPRO..
Personnel Management > Personnel Administration > Customizing User Interface > Change Screen Modification >
Select the program name and screen number which you got from IT0001
then click on magnification screen and select the Hide radio button for ADMINISTRATOR field.
Hope this helps...
Ajay

At-selection-screen modification

Hi Experts,
I am doing the selection screen modification. The selection screen is designed such as i have two radio buttons 1. header & 2. Item anb beside header radio button i have field sales document number and beside item radio button sales item number field.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-005.
SELECTION-SCREEN: position 32.
parameter:p_sh type c radiobutton group rg.                "Sales header
selection-screen: comment 35(15) for field p_sh.
selection-screen: comment 60(20) for field p_vbeln.
parameter:p_vbeln like vbak-vbeln MODIF ID gp5.            "Sales Document
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: position 32.
parameter:p_si type c radiobutton group rg.                "Sales Item
selection-screen: comment 35(15) for field p_si.
selection-screen: comment 60(20) for field p_posnr.
parameter:p_posnr like vbap-posnr MODIF ID gp6.            "Sales Document Item
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: skip.
This is the selection screen code where for sales document i have assiged Modif id GP5 for Item Modif id GP6. so when i check radio button p_sh ( header ) then sales document ( p_vbeln) shoudl be active for input .
if i check p_si (item) then both saleds document (p_vbeln) and p_posnr both have different group names i.e GP5 & GP6 should be active. i.e screen-inpu = 1.
I have written the following code for header but for item i am unable to make screen-input = 1 for two different groups. how to do that?
LOOP AT SCREEN.
    IF ( P_SH NE 'X' AND SCREEN-GROUP1 EQ 'GP5' ) OR
       ( P_SI NE 'X' AND SCREEN-GROUP1 EQ 'GP6' ).
      screen-input = 0.
      MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
This code is working when i click header radio button but for when i click item radio button (p_si) only item field is active i am unable to make sales docuemnt active at same time. please help me in this regard.
Regards,
sunil kairam.

Hi,
Check this piece of code changed a bit.
PARAMETERS : p_ct RADIOBUTTON GROUP grp .
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr,
PARAMETERS : p_sh RADIOBUTTON GROUP grp.
SELECT-OPTIONS : s_vbeln FOR vbak-vbeln,
PARAMETERS : p_si RADIOBUTTON GROUP grp.
SELECT-OPTIONS : s_vbeln1 FOR vbak-vbeln,
                               s_posnr   for vbak-posnr.
IF p_ct IS NOT INITIAL .
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'S_KUNNR-LOW'.
          screen-input = 1.
          MODIFY SCREEN.
         WHEN 'S_KUNNR-HIGH'.
          screen-input = 1.
          MODIFY SCREEN.
           WHEN 'S_VBELN-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_VBELN-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_VBELN1-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_VBELN1-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_POSNR-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_POSNR-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ELSEIF p_sh IS NOT INITIAL.
    LOOP AT SCREEN.
      CASE screen-name.
        WHEN 'S_KUNNR-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
         WHEN 'S_KUNNR-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
           WHEN 'S_VBELN-LOW'.
          screen-input = 1.
          MODIFY SCREEN.
        WHEN 'S_VBELN-HIGH'.
          screen-input = 1.
          MODIFY SCREEN.
        WHEN 'S_VBELN1-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_VBELN1-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_POSNR-LOW'.
          screen-input = 0.
          MODIFY SCREEN.
        WHEN 'S_POSNR-HIGH'.
          screen-input = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
now one more ELSEIF p_si IS NOT INITIAL
now make s_vbeln1 and s_posnr as input 1 and rest others as input 0.
endif.
Regards,
Nagaraj

Add field in Z* tcode screen

Dear All
How to add new field in Z* tcode screen
Regards
Suresh

Dear all
ys01 tcode our development tcode how will add new field in this tcode
Regards
Suresh

How to see OB40 tcode screen through spro

Hi All,
how to see OB40 tcode screen through spro (need path in SPRO)
Thanks,
Amit

Hi,
You use Tcode SPRO->Img (F5)->SAP Customizing Implementation Guide->Financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Posting->Define Tax Accounts
For details you can refer this link:
http://www.upload2world.com/pic110/upload2world_08290.jpg
Hope this will help you.
TQ
Regards,
Nazrul

Screen Modification Problem ...

While i am Working on Screen Modification i set Field ABKRS as Out Put Field in IT001 .But Now Client asking just we need that field Out Put Field as one Emp Group remaing as required Field,
How Should i do.Is it possiable through IVWID Feature?

Hi, you can make the field ABKRS required field for one EE sub group by modifying feature (PE03) P0001 some thing like below and then make corresponding entries in V_t588m.
On feature, MOLGA> EE subgroup> give your EE sub group with a return value like 10A and then OTHERWISE as return value like 10. Then you make entries in V_t588m table with corresponding return value in feature as variable values in T588M and field selection as RF or out put field only.
To create entriy in T588M, do as below:
Goto SM30> V_T588M
Click on Maintain.
Module pool name as MP000100
Feature P0001 and give appropriate alternative screen .....say 2000
Create two entries in this view with variable you created above in feature P0001 (return value) and set proper selection RF or out put.
Regards,
Alen

Screen Modifications for Travel Privileges (0017) screen

Hi all,
I am trying to change the screen modifications for Travel Privileges with module pool MP001700. The problem is I can't find the module pool through the IMG>Personnel Management>Personnel Administration>Customization User Interfaces>Change Screen Modifications. If not here, where/how can I do this?
Your help is much appreciated.
Thanks.
Regards,
Eric

Hi guys,
Thanks for the replies but I was looking to do screen modifications preferably by non ABAP methods. I have found the solution where you need to create the module pool manually and the fields selections will appear.
Regards,
Eric

Screen Modifications

hi,
for any global implementtion prj, if i wanted to have different fields in the infotypes, how to do this using screen modifications? and also what is the purpose of variable key in Change view " Infotype Screen Control"
for ex for US in IT0001, i wanted to hide Contract Field, for other country i wanted to dispay that field in IT0001.
Thanks

Hi Novice,
When you press F1 in any field you will get technical information.by pressing F9 or clicking the technical information icon.
Gather the information on program name and screen number. Table name and field name.
In IMG under personnel management -> personnel administrationt-> ustoming User interfaces->Change Modifications ->
Select your module pool Screen and Feature that is Table like IN case of infotype 0002 it is P0002 and select details
You will find radio button to hide the fields.
Warm REgards,
Kapil

Screen Modifications Recruitment Module

Dear All,
I wanted to make screen modifications for Intial entry of basic data's initial screen and even organisational assignment and other recruitment infotypes. But unable to find any pertaining to them. Can any one suggest me on this...
Regards,
Rajasekar

Hi,
Check feature MASSN via PE03: Determining the Fast Entry Dialog Module.
And check the return value in table TDCT, you will find the screen and program call by PB40 Initial Entry of Applicant Data.
And you can create your own dialog module to adjust the initial screen or change the exist one.
Hope helps,
Chen Jian

Data hidden by screen modification

Hi Experts,
I am facing a problem, I have created a record in IT0016 (Contract elements) and saved it. Now when I am chossing Period as "All" in the overview, it is not showing any data, however when I go to "display" I can see the input data with a message below "Data is hidden by Screen Modifications".
I tried searching table T588M but didn't understand anything. I need to change it asap.
Please suggest steps and help.
Thanks,
Megha

Hi Jignya,
It is as bmentioned below:
Screen Feature Variable Key Alternative screen Next Screen
3000 P0016 40 3000 0
I have maintained feature also, still its not showing.
Please suggest.
Above are the screen shot for the same.
Thanks,
Megha.

Screen Modifications in VA31 - Scheduling Agreement

Dear Experts,
This is regarding screen modification.where our requirement is to add two fields in VA31.
In VA31 , as soon as we creates Scheduling Agreement,we add material in item level in overview screen .after double clicking on line item ,system moves to the next screen where in schedule tab we enters scheduling details .after double clicking on that line item, system displays one more screen which contains schedule line data where now three tabs are there :Sales/Shipping/Procurement .
Our requirement is to add two more fields in any of this tab or add one more tab .
as i tried for screen exits ,but i am not able to find any screen exit.
Can anybody suggest me the way in order acheive above target.
with Regards,
Rajesh Chaskar

Hi Rajesh,
In SD module enhancements are generally done using User Exits.
In Program SAPMV45A the screen number 0312 can be used to add custom fields.
Then you can use the following Inlcudes in Program SAPMV45A to write your requisite code.
INCLUDE MV45AOZZ.             " User-modules PBO
INCLUDE MV45AIZZ.              " User-modules PAI
INCLUDE MV45AFZB.             " User-forms
INCLUDE MV45AFZZ.             " User-forms
You would need to get access key from SAP before going ahead with User Exits.
Hope the above information will help you in meeting your requirement..
Regards,
Abhisek.

ME41 Tcode Screen Modification

Similar Messages

Maybe you are looking for