ME51N Error in Document No.

Dear All
When i am working with ME51N (RFQ) entring document no it is giving a message "Document Number not within Defined Interval.
Kindly Help me.
Regards
Alok

Hi
If you are creating a PR with external number range Please check the Number range before assigning the number.
goto
SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Requisition-> Define Document Types. Here check the External  Number range group assigned to the Document Type used for creating the PR.
SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Requisition-> Define Number Ranges. Here check the number range .
Now enter the correct number in the PR.
Thanks & Regards
Kishore

Similar Messages

  • Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

    Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

    same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

  • Error: "The document information panel was unable to load"

    Hello,
    I have created a custom document content type that uses a specified word template for a sharepoint document library for contracts and offers, and added a few custom columns in the document library as well. The word template launches succesfully when creating a new item in the document library, but the problem arises when I add custom columns to the word template content type. When the document loads in Word, I get the following error: "The Document Information Panel was unable to load. The document will continue to open. For more information, contact your system administrator." And in details:
    "Document Information Panel cannot create a new, blank form.
    Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
    Form template: http://servername/sitename/proppanel.xsn
    The following DataObject either cannot be created or cannot be initialized: list_033AA217-8906-447E-A604-A300F51D4030
    Document Information Panel cannot add the following object to the DataObjects collection: list_033AA217-8906-447E-A604-A300F51D4030
    list_033AA217-8906-447E-A604-A300F51D4030 could not be added to the DataObjects collection.
    The following item already exists in the collection: list_033AA217-8906-447E-A604-A300F51D4030"
    Interestingly enough, I have two web applications running on the same server that I have tried to implement this on, and on the other it works flawlessly, meaning that the Document Information Panel launches successfully and I can edit the columns associated with that content type and store the values in a document library. I have also tried to save the DIP template from the working web application and use it as the default DIP template on the other application, but that doesn't work either.
    I have also tried to browse through all options and configurations in the application settings in CA and SSP, but to no avail. Any suggestions about what might be causing this problem or how to fix it would be greatly appreciated.
    - Sebastian Eriksson

    Hi All,
    I have the same problem with my DIP in already two of my document libraries. Please see below:
    Document Information Panel cannot create a new, blank form.
    Document Information Panel cannot open the form. To fix this problem, contact your system administrator.
    Form template: http://servername/sitename/proppanel.xsn
    The following DataObject either cannot be created or cannot be initialized: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
    Document Information Panel cannot add the following object to the DataObjects collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
    list_295E77CD-1C08-4DDC-A188-F86107F9BF60 could not be added to the DataObjects collection.
    The following item already exists in the collection: list_295E77CD-1C08-4DDC-A188-F86107F9BF60
    I have made the same thing that Kirikou has suggested and I was able to recreate the broken library. The problem is that Kirikou's way has failed on my Share Point staging installation:
    [COMException (0x80020009): Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
       Microsoft.SharePoint.Library.SPRequestInternalClass.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +0
       Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +125
    [SPException: Exception occurred. (Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION))]
       Microsoft.SharePoint.Library.SPRequest.RenderViewAsHtml(String bstrUrl, String bstrListName, String bstrViewID, String bstrViewXml, String bstrQualifier, ISPDataCallback pDataCallback, Boolean& pbSharedList) +166
       Microsoft.SharePoint.WebPartPages.ListViewWebPart.RenderView() +4239
       Microsoft.SharePoint.WebPartPages.ListViewWebPart.EnsureData(Int32 token) +658
       Microsoft.SharePoint.WebPartPages.SharePointDataProvider.Execute() +254
       Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateV2ConnectionsAndSharePointDataFetch() +139
       Microsoft.SharePoint.WebPartPages.SPWebPartManager.ActivateConnections() +85
       System.Web.UI.WebControls.WebParts.WebPartManager.OnPageLoadComplete(Object sender, EventArgs e) +52
       System.EventHandler.Invoke(Object sender, EventArgs e) +0
       System.Web.UI.Page.OnLoadComplete(EventArgs e) +2063076
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1875
    I will be very appreciated if somebody knows what is the reason for this problem.
    Best regards,
    Yordan Nikolov

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • I am trying to print a fillable form.  It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print."  Th latter is not true.  Won't print all, the page I am on, nor any series of pages inserted

    I am trying to print a fillable form - - an application for a Chinese visa.  It will not print and I get two error messages:  "document could not be printed" and   "there were no pages selected to print."  The latter is not true.  Won't print at all, the page I am on, nor any series of pages inserted.
    Am using a MAC desktop and a Cannon PIXMA MX922 printer.
    I need to print this form now that it is filled out?  What can I do? 

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

    Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

    Hi,
    Are you facing the issue with any pdf file?
    Please try updating Acrobat to 11.0.7 and check.
    You might also want to repair Acrobat and see.
    Regards,
    Rave

  • Error: The document could not be saved

    Hi
    I opened one of pdf file from mapped network drive and then make comment in it and  I am unable to save it. I receive the following error
    " The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder."
    Please advise.
    Thanks.

    Hi,
    You may refer the following thread for the solution and detailed discussion:- Cannot Save as to network after update to 11.0.10.
    Regards,
    Nakul

  • MRKO Error : Express document "update was terminated" received from author

    Hi Gurus,
    When settling Consignment through MRKO we are getting error 'Express document "update was terminated" received from author xxxx' in ECD system.
    At workplace inbox, the error shows "Error Info...   XS 007: Address invalid".
    Please note that I am not getting any short dump at ST22 for the same error.
    My queries are:
    1. How can I create a short dump for this error....this will help in analyzing the issue.
    2. What are the probable reasons for this error can be.
    Thanks in advance for helping.
    Regards,
    MC

    Hi,
    I have tried SM13 and getting ERROR XS007(Address Invalid).
    Diagnosis says:
    The address specified is invalid or initial (address value, address type INT).
    Procedure:
    Enter a correct address that is suitable for address type INT.
    The formats are:
      1. INT (Internet Mail Address): <name>@<domain> or comment<name>@<domain> or  <name>@<domain>(comment)
      2. FAX(fax addresses): <country><number>
    ETC
    Now as already told, I have properly maintained mail-id in "Email" field & "StandardComm.Mtd" field as E-Mail  of the Vendor Master.
    The mail ID is my official ID and working.
    Please advice further.
    Regards,
    MC.

  • Error : Express Document "update was terminated" by XYZ.

    Hi,
    When I am trying to process one output type that I have created, I am getting an error
    Express Document "update was terminated" by XYZ.
    Here XYZ represents my userid .
    I have linked the output type to one printprogram. If I execute the print program standalone,
    it is working fine. But if I try to process the output , I am getting the above error.
    Please suggest the needful.
    Regards
    Rudra

    Hi..
    thnx for ur reply....I got the reason for error

  • Error:Adobe document services error: SOAP Runtime Exception: CSoapException

    Dear All,
    While executing an adobe form I am facing the following error:
    Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport :
    Can you please suggest how the error can be rectified?
    Thanks and regards,
    Atanu
    Edited by: Atanu Dey on Feb 18, 2008 5:31 PM

    Hi, For solving this do one thing:
    The problem is In ECC the service AdobeDocumentServicesSec was set up in SM59 but nothing was configured for SSL. So you have to change this to:
    AdobeDocumentServicesSec.
    Thanks
    please reward points

  • I  am getting the error code, "error opening document, please try agailater" when clicking on the application link from a website. The form was working properly but stopped. What happened?.

    My form was working properly but today, 20 June, an applicant clicked on the website link and got an error that says, "error opening document, please try again later". How can this be fixed?

    Is this a FormsCentral form?

  • Can't open my IBA project: error parasing document index: invalid character in attribute value

    Hi guys,
    I am new of iBooks Author and I am not HTML code savvy (expect the very basics). I have to send an iBooks for an University exam and I can't open my file anymore.
    I was working on it since Saturday, I saved many times and I have quit the iBooks Author and rebooted my iMac few moments ago. There were no crashes.
    The project is a iBook with pictures, videos and some Tumult Hype animations. It is 248Mb.
    Now I can't open the file (but I can see it in quick view). The error message is in the subject, but here it is again:
    "Progetto iBooks" couldn't be opened. Error parsing document index: invalid character in attribute value.
    Now, I have to send the project today (here in Italy it is now 7:10 am) and so I am kind of desperate.
    Any suggestion?
    I am already working on making a new ibook, but if someone could give me a workaround to fix it and open it on iBooks I would be extremely grateful.
    Best regards,
    Sebastiano

    Hi Sebastiano,
    Did you ever get any answer? I have the same problem and now have to work from an old version again (good thing I had backup one manually!)
    Thx
    JP.

  • F-47 Error "Purchase document is allocated to asset"

    Hi,
    I've created a PO for buy asset, Account assignment "A". Now I want to raised a 10% down payment request for this PO.
    I hit this error:
    Purchase document is allocated to asset
    Message no. F5378
    Diagnosis
    The asset number   assigned in the purchase document
    - is different from the asset number entered manually
    - cannot be transferred, because the 'Asset number' field was hidden for the account in question
    System Response
    In the first instance a warning appears, drawing your attention to the different account assignments. In the second instance an error message appears, because the asset number must be transferred from the purchase order but the necessary field is hidden.
    Procedure
    If you receive the warning, check which asset number is the correct number for this down payment.
    If you receive an error message, you must either choose another special G/L indicator for down payments so that it is possible to assign an asset number to the relevant general ledger account, or you must change or delete the the specified purchase document number. Only those purchase documents are allowed which are not assigned to assets.
    Please advice me, what should I do? Thanks

    Hi,
    on top of my setting, I also perform this changes:
    1. enter OBC4 and select field status variant
        -   Then double-click on Field Status Group
        -   Select field status group: Reconciliation Accounts
        -   Then, click on the magnifying glass " Edit field status"
        -   Double-click on Asset Accounting
        -   Change Asset number/subnumber to optional entry and save.
    Now it hit another error:-
    "You cannot use this transaction type to post to this asset"
    Message no. AA834
    Diagnosis
    The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
    The asset to which you are posting belongs to class D01 (chart of depreciation L001). You cannot post to this class using the transaction type you have entered.
    Procedure
    Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
    Can I just change this error message to warning? Any impact if I do this? Thanks

  • There was an error opening document.  Access denied. Cant open pdf attached to emails

    I just upgraded to Acrobat Reader x and can't open files attached to emails in Outlook 2010.   If I save the file, I can open it.   I assume it has something to do with protected view or such but can't find where to change settings.   I can open .doc and .xlsx files attached to emails so it seems to be only an issue with .pdf files attached to emails in Outlook.   Suggestions?

    To make things simple for you, here are two ways for you fix the problem:
    A. Fix One PC
    Launch Adobe Acrobat Reader X
    Go to: Edit > Preferences...
    Click on "General" in the left pane.
    Uncheck "Enable Protected Mode at startup"
    You will prompted with a dialog box to remind you to close the application for the change to go into effect. Click Yes.
    Click OK to save your change.
    Exit Adobe Reader
    B. Fix Several PCs in Your Organization
    Following the above steps aren't practical if you have Adobe Acrobat installed on 1,000+ computers in 30 regional offices! Push this registry setting using your standard software deployment software.
    [HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\10.0\Privileged]
    "bProtectedMode"=dword:00000000
    Microsoft Outlook and other email clients
    I hear this will also fix the "There was an error opening this document. Access denied." error that is occurring with any email client, including Microsoft Outlook Express; Microsoft Outlook 2010, 2007, 2003; Eudora; Mozilla Thunderbird.
    Credit for this answer must go to http://www.brianstevenson.com/blog/adobe-acrobat-reader-x-there-was-error-opening-document -access-denied

  • PO Print Preview  Error 06019 "Document  does not exist"

    Hi people , i`ve the following issue. I`ve noticed that when creating a PO if the user clicks con the "Print Preview" BEFORE Holding or Saving the document , the system will give the following error msg :
    Document  does not exist
    Message no. 06019
    And then the system will hang , you won`t be able to go back and the whole PO is lost . Does anyone knows how to solve this ? thanks a lot for any help .

    Issue already discussed in this link Re: Unable to Save RFQ and PO.

Maybe you are looking for