ME51N - How to fetch the attachments from Documents icon
Hi Experts,
In the ME51N while creating the Purchase Requisition the creator will attach a PDF document in the DOCUMENT icon... How can i fetch the document and attach in the workflow... I have tried to find this DRAD table but i didnt found any entry...
Please kindly help me how can i achieve this...
Thanks,
Srikag.
Hi,
In the ME51N while creating the Purchase Requisition the creator will attach a PDF document in the DOCUMENT icon
Default configuration for document repository is in SAP database. There are possible ways of re-linking it to SAP content server.
How can i fetch the document and attach in the workflow..
You need to look for relevant tables in the database to get appropriate linkage using which your configure the same in your workflow item.
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
How to fetch the data from Ecc to BI ?
Hi everybody.
Can anyone briefly explain with the screen shots > How to fetch the datasource from RSA5 tcode in ECC to BI? How you replicate there? how the INFO PACKAGE , TRANSFORMATIONS, DTP , DSO, INFO CUBE was created? where we see the catalogs for this data.......THANKS IN ADVANCEHi.
You can follow the below steps to fetch the data from ECC to BI System.
1>Connection should be there between ECC and BW System.
2>Go to Tcode-RSA5 in ECC system and find your data source and then activate it.
3> Go to Tcode-RSA6 in ECC system to check whether your DS is available..if it is there then its been activated.
4>Go to Extract Checker tcode RSA3 and test the data and make sure data is correct.
5>login to BW Side..go to tcode RSA1-->Choose your source system. ECC -> double click on it and you will move to Data source>Select your Application component ex, SD,FI ...>Right click and replicate the Datasouce> Now on refresh you can see the datasource in BI System.
6>Install the related the Infoprovider .. cube or dso ..Connect the datasouurce and create Transformation.
7> Now create infopackage and run it in ful & init mode then do the delta for the new records.
Please refer the below link for more details on extraction.
http://www.trinay.com/SAP%20BW%20Extraction.pdf
Hope this helps.
Br.
Alok -
How to fetch the data from databse table and get the required output
Hi,
I have made a project that connects CEP to database table but i m getting some problem in fetching the data from database.
From the following code :
If the where condition is removed then the application runs fine but i am still not able to fetch the data from the table because it is not showing any output.
Can anyone please suggest me that how to write WHERE statement correctly and how i will be able to see the output.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
<processor>
<name>JDBC_Processor</name>
<rules>
<query id="q1"><![CDATA[
SELECT STOCK.SYMBOL as symbol, STOCK.EXCHANGE as exchange
FROM ExchangeStream [Now] as datastream, STOCK
WHERE datastream.SYMBOL = datastream.SYMBOL ]]></query>
</rules>
</processor>
<jms-adapter>
<name>JMS_IN_Adapter</name>
<jndi-provider-url>t3://CHDSEZ135400D:7001</jndi-provider-url>
<destination-jndi-name>jms.TestKanikaQueue</destination-jndi-name>
<user>weblogic</user>
<password>welcome1</password>
</jms-adapter>
</wlevs:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring" xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="StockEvent">
<wlevs:properties>
<wlevs:property name="SYMBOL" type="byte[]" length="16" />
<wlevs:property name="EXCHANGE" type="byte[]" length="16" />
</wlevs:properties>
</wlevs:event-type>
<wlevs:event-type type-name="ExchangeEvent">
<wlevs:class>com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent</wlevs:class>
</wlevs:event-type>
<wlevs:event-type type-name="StockExchangeEvent">
<wlevs:properties>
<wlevs:property name="symbol" type="byte[]" length="16" />
<wlevs:property name="price" type="byte[]" length="16" />
<wlevs:property name="exchange" type="byte[]" length="16" />
</wlevs:properties>
</wlevs:event-type>
</wlevs:event-type-repository>
<bean id="readConverter" class="com.bea.wlevs.adapter.example.JDBC_CEP.Adapter_JDBC" />
<bean id="outputJDBCBean" class="com.bea.wlevs.bean.example.JDBC_CEP.OutputBean_JDBC">
</bean>
<wlevs:adapter id="JMS_IN_Adapter" provider="jms-inbound">
<wlevs:listener ref="ExchangeStream" />
<wlevs:instance-property name="converterBean"
ref="readConverter" />
</wlevs:adapter>
<wlevs:processor id="JDBC_Processor" advertise="true">
<wlevs:listener ref="OutputChannel" />
<wlevs:table-source ref="STOCK" />
</wlevs:processor>
<wlevs:channel id="ExchangeStream" event-type="ExchangeEvent" advertise="true">
<wlevs:listener ref="JDBC_Processor" />
</wlevs:channel>
<wlevs:channel id="OutputChannel" event-type="StockExchangeEvent"
advertise="true">
<wlevs:listener ref="outputJDBCBean" />
</wlevs:channel>
<wlevs:table id="STOCK" event-type="StockEvent"
data-source="StockDs" table-name="STOCK" />
<wlevs:table id="STOCK_EXCHANGE" event-type="StockExchangeEvent"
data-source="StockDs" table-name="STOCK_EXCHANGE" />
</beans>
ExchangeEvent.java:
package com.bea.wlevs.event.example.JDBC_CEP;
public class ExchangeEvent {
public String SYMBOL;
public String symbol;
public String exchange;
public ExchangeEvent() {
public String getSYMBOL() {
return SYMBOL;
public void setSYMBOL(String sYMBOL) {
SYMBOL = sYMBOL;
public String getSymbol() {
return symbol;
public void setSymbol(String symbol) {
this.symbol = symbol;
public String getExchange() {
return exchange;
public void setExchange(String price) {
this.exchange = price;
Adapter Class:
package com.bea.wlevs.adapter.example.JDBC_CEP;
import com.bea.wlevs.adapter.example.JDBC_CEP.MyLogger;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
public class Adapter_JDBC implements InboundMessageConverter{
@SuppressWarnings("unchecked")
public List convert(Message message) throws MessageConverterException, JMSException {
Random rand = new Random();
int unique_id = rand.nextInt();
DateFormat dateFormat;
dateFormat = DateFormat.getTimeInstance();
dateFormat.format(new Date());
MyLogger.info(unique_id + " CEP Start Time is: " + dateFormat.format(new Date()));
System.out.println("Message from the Queue is :"+ message);
TextMessage textMessage = (TextMessage) message;
String stringMessage = textMessage.getText().toString();
System.out.println("Message after getting converted into String is :"+ stringMessage);
String[] results = stringMessage.split(",\\s*"); // split on commas
ExchangeEvent event1 = new ExchangeEvent();
event1.setSYMBOL(results[0]);
List events = new ArrayList(2);
events.add(event1);
return events;
Output Bean Class :
package com.bea.wlevs.bean.example.JDBC_CEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import com.bea.core.datasource.DataSourceService;
public class OutputBean_JDBC implements StreamSink{
public void onInsertEvent(Object event) {
if (event instanceof ExchangeEvent) {
ExchangeEvent cacheEvent = (ExchangeEvent) event;
System.out.println("Symbol is: " + cacheEvent.getSymbol());
System.out.println("Exchange is: " + cacheEvent.getExchange());
System.out.println(DataSourceService.class.getClass());
Kindly let me know if you need further info.Do you have StockDs configured in your server config.xml?
I think the query should look more like this:
SELECT stocks.SYMBOL, stocks.EXCHANGE
FROM STOCK as stocks, ExchangeStream [Now] as datastream WHERE stocks.SYMBOL = datastream.SYMBOL
Thanks
andy -
How to Fetch the Data from a Cube
Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi KrishnaHey I got the Solution. It follows in this way :
A Cube is nothing but a Data Storage. Based on the Mapping we given it considers the data.
To fetch the data from the Cube -> we have to write the SQl Query as below :
SELECT dealer_name,model_name,sales
FROM TABLE(OLAP_TABLE('MDB.FINAL_AW DURATION SESSION',
'DIMENSION dealer_name AS varchar2(30) FROM FINALDEAL
DIMENSION model_name AS varchar2(30) FROM FINALMODEL'));
We can create View for the above statement o
we can apply group by ,rollup, etc etc clauses
and even we can write where clauses for the above select statement.
But now my doubt is :
can we apply any calculations while mapping the Level to an Dimension.
Generally we will map Level toa dimension as DBUSER.TABLENAME.COLUMN NAME
can we apply any calculation like :
MIS.PROPKEY020MB.MATURITY_DATE+2
Please help for the above.
If any wrong is there please let me know
Regards,
S.Vamsi Krishna
can we apply -
How to reterive the attachments from a message with message id.
Hi Friends,
I want to know that How can i retrieve the attachments from an incoming message.
Also how can I separate the body part from message. How can I get a list of files attached with a message.JavaMail API don't give really method to parse multipart message
See http://www.jservlet.com/
Object Pop3.Tools that will help you to parse a multipart message, get file attachment with specific file extension.
regards, -
Hi,
I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
I have used this code:
if ("ViolationCat".equals(lovInputSourceId)) {
OAMessageLovInputBean msglov =
(OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
// String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
String p_violation_category =
(String)msglov.getValue(pageContext);
// System.out.println(" p_violation_category =" +
// p_violation_category);
String v_violation_category = "";
//System.out.println("vcat=" + vCat);
OAViewObject violationVO =
(OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
Number vcatViolationIdnum =
(Number)violationVO.getCurrentRow().getAttribute("ViolationId");
String vcatViolationId = "" + vcatViolationIdnum;
pageContext.putTransactionValue("vcatViolationId",
vcatViolationId);
pageContext.putTransactionValue("p_violation_category",
p_violation_category);
String query =
" SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
" LOOKUP_TYPE \n" +
" FROM apps.fnd_lookup_values \n" +
" WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
PreparedStatement ps = txn.createPreparedStatement(query, 1);
try {
ps.setString(1, p_violation_category);
ResultSet rs = ps.executeQuery();
//System.out.println("before while,");
// rs.next();
// v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category="+v_violation_category);
while (rs.next()) {
//System.out.println("inside while");
v_violation_category = rs.getString("LOOKUP_CODE");
// System.out.println("v_violation_category=" +
// v_violation_category);
ps.close();
} //try ends
catch (Exception e) {
e.getMessage();
//System.out.println("in catch.." + e.getMessage());
OAViewObject subCatVO =
(OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
//System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
v_violation_category + "'");
System.out.println("after set where clause VO: subCat VO::" +
subCatVO.getQuery());
subCatVO.executeQuery();
// System.out.println("query of subCat VO::" +
// subCatVO.getQuery());
//End of sub category Validation
It is working fine only for the 1st row of teh table.
I have tried to fetch the value using :
String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
But it is fetching null value.
Please tell me how can I able to fetch the values.Hi
in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
OAApplicationModule am =
(OAApplicationModule)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
if ("<ItemPPREventName>").equals(event))
// Get the identifier of the PPR event source row
String rowReference =
262
pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
Serializable[] parameters = { rowReference };
// Pass the rowReference to a "handler" method in the application module.
am.invokeMethod("<handleSomeEvent>", parameters);
In your application module's "handler" method, add the following code to access the source row:
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
thanx
Pratap -
How to Fetch the Data from Screen(Structure) Leval
Hi,
In HR I have to retrive some fields from Screen leval ..Ex.Q0002..genaraly we are able to retrive the
data from PA0002.
in this Scenari how can i fetch data from Q0002.
Thanks in Advanceyou can check the below code for this .
DATA: BEGIN OF DYNP_VALUES OCCURS 10.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF DYNP_VALUES.
DATA : HELP_val TYPE Pxxxx-abcde.
REFRESH DYNP_VALUES.
DYNP_VALUES-FIELDNAME = 'PXXXX-ABCDE'.
APPEND DYNP_VALUES.
* read screen values
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = DYNP_VALUES
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
SORT DYNP_VALUES BY FIELDNAME.
READ TABLE DYNP_VALUES WITH KEY 'PXXXX-ABCDE' BINARY SEARCH.
IF SY-SUBRC EQ 0.
HELP_VAL = DYNP_VALUES-FIELDVALUE.
ENDIF.
ENDIF.
just check if this code is working for u .
br,
vijay. -
How to fetch the data from pl/sql table dynamically
Hi All, I have the requirement of comparing two db views data in pl/sql. So, I have bulk collect the view into pl/sql table. But, the issue is, It is expecting to provide the column name for comparison. But, in my case, column name is dynamic. So, i cannot provide the column name directly for comparison.
For eg: In my view t1_VW, i have 4 columns. stid, c1,c2,c3,c4 and similar structure for t2_vw
my code
TYPE v1_type IS TABLE OF t1_vw%ROWTYPE;
l_data v1_type;
TYPE v1_type1 IS TABLE OF t2_vw%ROWTYPE;
l_data1 v1_type1;
test varchar2(1000);
test1 varchar2(1000);
temp1 number;
begin
SELECT * Bulk collect into l_data
FROM T1_VW;
SELECT * Bulk collect into l_data1
FROM T2_VW;
select l_data(1).stid into temp1 from dual; -- It is working fine and gives me the value properly
-- But, in my case, we are reading the column names from array, i am constructing the query dynamically and execute it.
test :='select l_data(1).stid into temp1 from dual';
execute immediate test into temp1;
-- I am getting error as follows:
Error report:
ORA-00904: "L_DATA": invalid identifier
ORA-06512: at "SYSTEM.BULKCOMPARISON", line 93
ORA-06512: at line 2
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action
end;
- Please help me to get rid of this issue. Is it possible to construct the query dynamically and fetch the data?. If not, is there any other better approach to compare the data between two views?.Output should display what are all columns changed and its old value and new value.
For eg., output should be
COLUMNNAME OLD_VALUE NEW_VALUE STID
C1 20 10 1
C2 50 40 2
C3 60 70 2
C2 80 90 3Why no do this only via a simple sql ?
create table a (STID number, C1 number, C2 number, C3 number);
insert into a values (1, 20, 30, 40)
insert into a values (2, 40, 50, 60);
insert into a values (3, 90, 80, 100);
create table b as select *
from a where 1 = 0;
insert into b values (1, 10, 30, 40)
insert into b values (2, 40, 40, 70);
insert into b values (3, 90, 90, 100);
commit;And now you can issue such a kind of select
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid;I would then create a new table a_b_difference having the same structure as a or b and insert into it like this
create table a_b_diff as select * from a where 1 = 0;
insert into a_b_diff
SELECT stid , c1, c2, c3
FROM
( SELECT a.*,
1 src1,
to_number(null) src2
FROM a
UNION ALL
SELECT b.*,
to_number(null) src1,
2 src2
FROM b
GROUP BY stid , c1, c2, c3
HAVING count(src1) <> count(src2)
order by stid
;Then each time there is a difference between a column in a and its equivalente one in b (per unique stid ) a record will be inserted in this table.
You can do more by adding the name of the table in front of each record in this table to see exactly where the data comes from
Best Regards
Mohamed Houri -
Please Help - How to Fetch the Data from a Cube
Dear All,
We created a cube containing dimensions
Customer, Product, Branch, Activity, Time dimensions
using Oracle Analytical WorkSpace Manager.
Once Cube is created,
How can I see the Data existing in the Cube using normal SQL Queries ??? Through Analytical Workspace Manager Toll we r able to see the data. But our requirement is to see the data from the Cube using SQL Queries.
Regards,
S.Vamsi KrishnaYou appear to have the wrong forum. This forum is for the Oracle Workspaces application, which is a component of Oracle Collaboration Suite.
Perhaps one of the forums in the database section will be more relevant:
http://forums.oracle.com/forums/category.jspa?categoryID=18
regards,
-Neil. -
How to fetch the data from a pl/sql table and varray, with some example
I want to fetch the data using a cursor from Pl/sql table and varry and I want to update the data.
Please provide me some example.PL/SQL Table - please note that, right term is Associative Array.
Presumably you are referring to the 'often heated' back-and-forth that sometimes goes on in the forums when people refer to ANY PL/SQL type using a term with the word 'table' in it?
Curious that you then show an example of a nested table!
type emp_tab is table of employees%rowtype;
The 'right term' for that is 'nested table'. The following would be an 'associative array' or 'index-by table'
type emp_tab is table of employees%rowtype INDEX BY PLS_INTEGER;
Those used to be called 'PL/SQL tables' or 'index-by tables' but 'associative array' is the current term used.
Associative Arrays
An associative array (formerly called PL/SQL table or index-by table) is a set of key-value pairs. Each key is a unique index, used to locate the associated value with the syntax variable_name(index).
The data type of index can be either a string type or PLS_INTEGER.
Since the Oracle docs often use 'PL/SQL table' or 'index-by table' it isn't unusual for someone asking a question to use those terms also. Technically the types may not be 'tables' but it's clear what they mean when they use the term.
In PL/SQL the term 'nested table' is still used even though the PL/SQL collection is not really a table. SQL does have nested tables where the data is actually stored in a table. The PL/SQL 'nested table' type can be used as the source/destination of the SQL data from a nested table so that may be why Oracle uses that term for the PL/SQL type.
The doc that SKP referenced refers to this use:
Nested Tables
In the database, a nested table is a column type that stores an unspecified number of rows in no particular order. When you retrieve a nested table value from the database into a PL/SQL nested table variable, PL/SQL gives the rows consecutive indexes, starting at 1. -
Hi,
I would like to retrive the data from the table COEP ,based on KOKRS,BELNR fields.
I need the output for Cost centre, cost element, wbs element,net work ,activity.
These values are storing OBJNR ,OBJNAR_1,OBJNR_2,OBJNR_N3.
But here always these field are not giving the correct values.
for example : for one record COST CENTRE vlaue is storing in OBJNR_1 field,
for one record COST CENTRE vlaue is storing in OBJNR_2 field,
for one record COST CENTRE vlaue is storing in OBJNR_3 field.
Here SAP has used a generic approach for this.
How can I dispaly the values in this case ?
Thanks and Regards
Srinivas.NHi,
I am asking, how can we say OBJNR_1 value alwyas belongs to cost center ?
USPOB is not filling always. -
How to fetch the data from query to internal table ?
Dear all ,
I would like to fetch the query data(sq01) into my internal table ? is it possible to do that ?
Best Regards,
CarlosHi
Try this <b>RRW3_GET_QUERY_VIEW_DATA</b>
Also, you can have a look at this...
<a href="/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii Query results into Internal table</a>
Regards
Raj -
How to fetch the data from a standard report to a user defined report
Hi,
i m using a standard report RFEBKA00 which uses CHAR300 variable(it is not used in selection screen).
can u help me ,
to collect the data from CHAR300 and to use it in my own report.
Message was edited by:
jaya ramanhi jayaramm..
you have to use SUBMMIT and send the parameters of your selection screen to the standard submmit prorgram...
beliow is the program for you .... just pick the selection parameter and pass corresponding parameter in the Submit which i mention as ...... replace with = and parameter in the selection screen.
report zrsers.
INCLUDE rfebka03.
INCLUDE rfebfr03. " Data France
INCLUDE RFEKAP00. "n927883
TABLES: rfsdo,
sscrfields,
hrdeaoifld.
DATA: lt_statements TYPE STANDARD TABLE OF fieb_kukey,
l_statement TYPE fieb_kukey.
*Daten für die Mahnsperre "mo260105
TYPES: BEGIN OF s_kukey_mansp,
sign(1),
option(2),
low TYPE kukey_eb,
high TYPE kukey_eb,
mansp TYPE mansp,
anztg TYPE anztg,
bukrs TYPE bukrs,
END OF s_kukey_mansp.
DATA: lt_kukey TYPE STANDARD TABLE OF s_kukey_mansp,
l_kukey LIKE LINE OF lt_kukey,
l_gjahr TYPE gjahr,
LT_GJAHR TYPE STANDARD TABLE OF GJAHR,
L_MANSP TYPE MANSP,
l_kunnr TYPE kunnr,
l_lifnr TYPE lifnr.
FIELD-SYMBOLS: <mansp> LIKE LINE OF gt_mansp.
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE text-165.
PARAMETERS: einlesen LIKE rfpdo1-febeinles,
format LIKE rfpdo1-febformat DEFAULT 'M' AS
LISTBOX VISIBLE LENGTH 30 USER-COMMAND bai,
AUSZFILE LIKE RFPDO1-FEBAUSZF,
umsfile LIKE rfpdo1-febumsf,
pcupload LIKE rfpdo1-febpcupld DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 1.
*------- Buchungsparameter ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 2 WITH FRAME TITLE text-160.
*SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xcall TYPE febpdo-xcall RADIOBUTTON GROUP 1.
*SELECTION-SCREEN
* COMMENT 03(29) FOR FIELD pa_xcall.
PARAMETERS: pa_xbkbu TYPE febpdo-xbkbu.
*SELECTION-SCREEN
* COMMENT 35(16) text-171 FOR FIELD pa_xbkbu.
PARAMETERS: pa_mode TYPE rfpdo-allgazmd NO-DISPLAY.
*SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_xbdc LIKE febpdo-xbinpt RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-163 FOR FIELD pa_xbdc.
SELECTION-SCREEN
COMMENT 35(20) text-164 FOR FIELD mregel.
PARAMETERS: mregel LIKE rfpdo1-febmregel DEFAULT '1'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_test LIKE rfpdo1-febtestl RADIOBUTTON GROUP 1.
SELECTION-SCREEN
COMMENT 03(29) text-168 FOR FIELD pa_test.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: valut_on LIKE rfpdo2-febvalut DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK 2.
*------- Finanzdisposition ---------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 5 WITH FRAME TITLE text-172.
SELECTION-SCREEN: BEGIN OF LINE.
PARAMETERS: pa_xdisp LIKE febpdo-xdisp.
SELECTION-SCREEN
COMMENT 03(29) text-170 FOR FIELD pa_xdisp.
PARAMETERS: pa_verd LIKE rfffpdo1-ffdisxverd.
SELECTION-SCREEN
COMMENT 34(15) text-174 FOR FIELD pa_verd.
SELECTION-SCREEN
COMMENT 55(15) text-173 FOR FIELD pa_dsart.
PARAMETERS: pa_dsart LIKE fdes-dsart.
SELECTION-SCREEN: END OF LINE.
PARAMETERS: intraday LIKE rfpdo1_en-akintraday AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK 5.
*C5060356
*------- BAI Preprocessor --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 6 WITH FRAME TITLE text-007 .
PARAMETERS: p_baipre TYPE bai_prep AS CHECKBOX MODIF ID mo1,
p_priord LIKE prior_day AS CHECKBOX MODIF ID mo1,
p_stop LIKE stop_flag AS CHECKBOX MODIF ID mo1.
SELECTION-SCREEN END OF BLOCK 6.
*------- Interpretationsparameter --------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE text-166.
DATA: num10(10) TYPE n.
DATA: chr16(16) TYPE c.
SELECT-OPTIONS: s_filter FOR febpdo-febfilter1.
SELECT-OPTIONS: t_filter FOR febpdo-febfilter2.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN
COMMENT 01(31) text-176 FOR FIELD pa_bdart.
PARAMETERS: pa_bdart LIKE febpdo-bdart.
SELECTION-SCREEN
COMMENT 36(21) text-177 FOR FIELD pa_bdanz.
PARAMETERS: pa_bdanz LIKE febpdo-bdanz.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK 3.
*------- Ausgabeparameter ----------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK 4 WITH FRAME TITLE text-167.
PARAMETERS: batch LIKE rfpdo2-febbatch,
p_koausz LIKE rfpdo1-febpausz, " Kontoauszug drucken
p_bupro LIKE rfpdo2-febbupro,
p_statik LIKE rfpdo2-febstat,
pa_lsepa LIKE febpdo-lsepa.
SELECTION-SCREEN END OF BLOCK 4.
SUBMIT RFEBKA00
WITH AUSZFILE = AUSZFILE ***like this replace the .... and pass selection parameters
WITH BATCH = BATCH
WITH EINLESEN ...
WITH FORMAT ...
WITH INTRADAY ...
WITH MREGEL ...
WITH PA_BDANZ ...
WITH PA_BDART ...
WITH PA_DSART ...
WITH PA_LSEPA ...
WITH PA_MODE ...
WITH PA_TEST ...
WITH PA_VERD ...
WITH PA_XBDC ...
WITH PA_XBKBU ...
WITH PA_XCALL ...
WITH PA_XDISP ...
WITH PCUPLOAD ...
WITH P_BAIPRE ...
WITH P_BUPRO ...
WITH P_KOAUSZ ...
WITH P_PRIORD ...
WITH P_STATIK ...
WITH P_STOP ...
WITH S_FILTER ...
WITH T_FILTER ...
WITH UMSFILE ...
WITH VALUT_ON = VALUT_ON and return .
reward points if it is usefull
Girish -
Pls let me know how to fetch the data from tables bdcp or bdcps
Hi guru's!!!!
I want to post the changed master data to the legacy.
I am npt using IDOC. I want to go ahead by using the change doc. I want to know how we can filer the change doc. data for my equirement. & also how to send the data
transaction wise. I am using the FMs "change_pointers_read.
it is very urgent..
Thanks in advance!!!!!Hi,
1. You will have to activate the change pointers for the master data you are looking for.
2. You can do the configuration so that whenever master data is changed, a IDOC is triggered for that master data.
3. You can configure the IDOC's to be transmitted to your legacy system in the form of files or to your middleware system.
<b>You don't have to read the CHANGE POINTERS yourself.</b>
Regards,
Ravi
Note : Please mark all the helpful answers
Message was edited by: Ravikumar Allampallam -
How to download the attachments from GOS toolbar.
Hi,
I am facing a problem. I have to go to transaction ME33k and click the GOS toolbar. Then click on the attachment list. After the attachment list arrives, I need to transfer the files to the local system. The issue is that I need to do all this using a custom program. The custom program will transfer the files into the local system and then mail them to specified recipients.
The custom program has been made but I am unable to download files from the SAP internal location to the local PC. Please advise.Please try the next abap code to download all applicant attachments. SAP system 6.40
in this - OBJECT_ID - applicant SAP number
data: i_connections type BDN_CON occurs 0,
i_connections_rec type BDN_CON .
data fol_id like soodk.
data doc_id like soodk.
data: OBJCONT type SOLI occurs 0 .
DATA: PATH TYPE CHAR255,
COMP_ID TYPe CHAR255 .
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
CLASSNAME = 'APPLICANT'
OBJKEY = OBJECT_ID
CLIENT = SY-MANDT
TABLES
GOS_CONNECTIONS = i_connections
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_connections INTO i_connections_rec .
move i_connections_rec-LOIO_ID to FOL_ID .
move i_connections_rec-LOIO_ID+17(25) to doc_id .
CALL FUNCTION 'SO_OBJECT_READ'
EXPORTING
FOLDER_ID = FOL_ID
OBJECT_ID = doc_id
TABLES
OBJCONT = OBJCONT .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_connections INTO i_connections_rec .
move i_connections_rec-LOIO_ID to FOL_ID .
move i_connections_rec-LOIO_ID+17(25) to doc_id .
CALL FUNCTION 'SO_OBJECT_READ'
EXPORTING
FOLDER_ID = FOL_ID
OBJECT_ID = doc_id
TABLES
OBJCONT = OBJCONT .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE 'D:\GOS\' i_connections_rec-DESCRIPT '.' i_connections_rec-DOCUCLASS into PATH .
CONCATENATE i_connections_rec-DESCRIPT '.' i_connections_rec-DOCUCLASS into COMP_ID .
CALL FUNCTION 'SO_OBJECT_DOWNLOAD'
EXPORTING
DEFAULT_FILENAME = COMP_ID
FILETYPE = 'BIN'
PATH_AND_FILE = PATH
EXTCT = 'K'
NO_DIALOG = 'X'
TABLES
OBJCONT = objcont .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP .
Maybe you are looking for
-
Write a progarm to test two parts at the same time
Hi: I need to write a program in LabView that is capable of testing two parts at the same time. Explanation: I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test informat
-
Hello, I am relatively new to configuring DNS settings in Server Manager. Recently, my Kerberos relm stopped working and I am now getting this error message on the console: configured name and reverse DNS name do not match (fileserver.occu-med.com !=
-
hi folks. had this ipod for a while now. was charging it this mornin and all was good. now it wont turn on, ive tried charing it again and its not workin, iTunes wont even open. any idea on whats wrong/how to fix it? packard bell Windows XP
-
Hi, I am in Colchester, Essex, UK. I have problem with the volume button which did not funtioned properly since I bought it. I thought it is like that. I try to use the ipad at Tesco near my place and feel the button is typically different from mine.
-
Data in InfoSet not Displaying after TR
Hi, I just transported an InfoSet to Production. All the DSO's seem to be displaying data and working fine. But the InfoSet is not displaying any data.The InfoSet was working fine in QAS. How can i fix this? Thanks