ME52N-Create PR with Multiple plants..

Hi,
Version of our SAP System is 4.6C..
In ME52N transaction there is a tab called 'Release Strategy'...
In this we have to enter materials belonging to same plant..
for ex : if item1 is of plant 1011 then plant of item2 should also be 1011
but according to our requirement it can be 1014 also..that is multiple plants..
Is it possible to fulfill this requirement..if so any suggestion on how to proceed..
Any help will be appreciated..
Thanks & Regards
Swathi

Hi
THis can be contolled via authorisation to the users. Please check with Basis consultant.
[http://help.sap.com/saphelp_45b/helpdata/en/91/1a39516e36d1118b3f0060b03ca329/content.htm]
Karthik
Edited by: Karthik on Jun 29, 2011 5:59 PM

Similar Messages

Standard Rush Order with multiple plants

Hello gurus,
We just upgraded to 6.0 from 31I and when creating a
rush order with multiple plants the first item's delivery
does not contain a ship-to party were the second item's
delivery does. Table VBPA does not have a record for the
first delivery but the second delivery is there. This did not happen in 31I.
Please advice.
Best Regards.

hello, Ruben.
hhmmm. your table XVBPA looks like a created table that is not SAP standard. i am not an ABAP person so i could not pretend to give you good advice, but i (my speculation only) suspect that there was a user exit or an ABAP program that made the system do the postings to this table instead of the standard VBPA.
i further speculate that during the upgrades, some of the enhancements may have been lost or diverted. (to prevent this, you usually use the 'Z' naming convention, which is to have this letter as the start of any name for an enhancement or definition outside of SAP standard)
your best bet is to try getting an ABAP consultant (or are you one already?) to help you look at this.
regards!

Restricting single PO with multiple plant

Experts,
Pl help me in restricting user from creating single PO with multiple plant. Is there any config available???
I dnt want to go for any ABAP development.
Thanks in Advance,
Parag Mahajan

Dear Parag,
Querry : Restricting a single P.O. with multiple plants:
If you want to restrict a single Purchase order with multiple plants the reason may be that;
Suppose your ordering material A for which you have three vendors in you SAP. But you are requiring this material in all your plants say example three plants.
You can create Purchase order for same with vendor but due the huge requirement your vendor get overloaded.And your other capable vendors are not used at all.
You can try out with quota arrangement for all vendors with which the quantity will be allocated to all the vendors depending on the quota rating.
Also you can define lot sizing procedure for a your vendor in customizing and can avoid creating Purcahse order with multiple plants.
Thanks ,
Tushar Patankar

Unable to create PO with multiple line items through LSMW-BAPI method

Hi All,
I have a requirement of creating PO through LSMW. I can't use LSMW standard batch input program since there are some fileds not available and also it has many limitations. I'm using LSMW-BAPI method ( Business object BUS2012) which create IDOC and uses BAPI_PO_CREATE1 to ultimately post the PO in the system. I am trying to create PO from a single file which contains both Header and Item data.
Now my problem is that everytime PO is being created with Single line item only. Everytime I am giving multiple item data in the source file LSMW is preparing multiple IDOCs for multiple line items. As per my understanding this is happenng since header and item is in the same hierarchy level of IDOC type PORDCR102 and the control record is inserted for every line item in the source file.
It seems that through LSMW-BAPI it is not possible to create PO with multiple line items. Can anybody provide some input regarding this? Thanks in advance.
BR,
Atanu Mukherjee

Solved by myself.
Earlier the problem was that LSMW was not being able to recognize items under same header. It was creating new IDOCs every time it gets a new item. To enable this we need to create two structure HEADERDATA and ITEMDATA. Two additional identifier fields with identifier value 'H' and 'I' should be added in these two structures respectively. Then we need one sequential file with the identifiers field followed by the header and Item data. Example:
H~header data
I~item data
I~item data
This would help the standard program to understand what are the items under same header and ultimately create PO with multiple line items.
BR,
Atanu Mukherjee

How to create parameter with multiple selection in a query (SQ02) ?

Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.

Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter?

Creating Authorization for multiple plants

Hi,
I have one requirement that, Creating Authorization for multiple plants
SELECT-OPTIONS:    s_werks FOR mseg-werks.
    AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
           ID 'ACTVT' FIELD '03'
           ID 'WERKS' FIELD s_werks.
1. If have no of plants in s_werks then how to authorize the plants?
2.if i dont enter any plant in my selection screen how to authorize that?
3. if i have 5 plant only then how i can authorize those perticular plants only?
Thanks in advance,
Thanks,
DP.

S_WERKS is not a field; it's a set of fields. Use simple ABAP to select your plants and loop at the selection(s) to check...

Creating infotypes with multiple subtype

Please tell me
How to create infotype with multiple subtype

Hi
Please check this like it has got step by step details
http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
Regards,
Venkat

Materials with multiple plants and wm views

Hello,
we are migrating materials to an environment where we have multiple plants, sales org., warehouse numbers. When we create the WM view we set a plant and warehouse number. As WM view is not really connected to a plant (table MLGN) we have the problem that when the users wish to mantain a material WM view, they see different combinations of plants and warehouse numbers, what is not really correct, as they are in different countries.
Country 1: plant 0001, warehouse number 001
Country 2: plant 0002, warehouse number 002
Country 3: plant 0003, warehouse number 003
In country 1, with MM02, the user can open the material in plant 0001 and in any warehouse, ie. 001, 002, 003. This user should only be able to open plant 0001, warehouse nr. 001.
Is there a way in customizing, authorizations, etc. to avoid this?
Thanks for your comments.

Hi
THis can be contolled via authorisation to the users. Please check with Basis consultant.
[http://help.sap.com/saphelp_45b/helpdata/en/91/1a39516e36d1118b3f0060b03ca329/content.htm]
Karthik
Edited by: Karthik on Jun 29, 2011 5:59 PM

Problem Creating PDF with Multiple Files in Pro. 7

I'm using Adobe Acrobat Professional 7 on a computer with Windows XP.
The problem is that when I try to create a PDF with multiple files everything just suddenly stops. There are 75 files involved and when it gets to around 41 or so (don't know the exact number because I turned away from my computer for just a moment), it just stops. There are no error messages; nothing. Just a blank Acrobat screen.
Last week I had a different problem which was resolved by an uninstall/reinstall and I was able to create the PDF with those exact same 75 files, but after the PDF was created I realised that some changes needed to be made. I dumped the PDF, made the appropriate changes and left it for the weekend. Today I the new problem has arisen.
Any ideas what the problem might be?

I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive

Create folder with multiple files (was: folders)

Can you create a folder with multiple files and direct the page to go to the folder and then the reader can select the file they wish to choose? Example Council Mintes Folder with a file for each set of minutes. The hyperlink would open the folder and then the reader would select whch set of minutes they'd like to see.

You may not have access to it depending on your hosting company and plan, but if you did have the ability to change it you'd normally do it in the admin area of your hosting account which would update the proper files on your server.
You may also be able to do it manually, but the "how to" depends on the server type you are running.
EDIT: I'd still suggest using a server script (like the PHP I linked to) because the look of a directory with browsing turned on is pretty ugly and can't be changes since it's not a page on your site. With the PHP I linked to, you could have an actual page for your links, complete with your site's design, that simply lists the files from the specified directory. It's very simple to set up if you have PHP on your server.

Looking to create delivery with multiple batch line items

Hi,
Can you please suggest me BAPI / FM to create a delivery with multiple batches. like ... i have 1 mail line item in the delivery and n sub line items. If possible can you please post req parameters too. Thanks in advance.

solved my own

Creating POs with multiple line items

Hi,
Is it possible to create a PO with multiple line items from the Sharepoint. The developer guide shows sales order creation with a single line item. If yes, please let me know how it can be done.
Thanks,
Pranil

Hi Pranil,
You can achieve the user case to create a PO with multiple line items in 1 step by creating a custom solution UI in SharePoint. This is not possible if you simply use the out of box UI (as depicted in the guide).
It depends on how to define the ESR data type. You can create a data type with header details of PO and collection of items with cardinality as 0..n and create a complex BDC model using SPD --> then create a custom UI.
Other option would be keep it as 2 lists (2 step action). First create a PO header and then add item by item in 2 steps as foreign key relationship. You can see the example of Account and Activity in pre-shipped contents to get an idea.
Thanks,
Girimurugan

Create Characteristic with multiple units of measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

Hi,
With Multiple Unit Of measures, I don't think its possible.
You can Use CHAR for characteristics, to Use.
Instead for Fixed Units. Let Marketing/sales Enter the req.
But you shall make it Multiple Selection, Since you can use them in Selection Condition.
Hope this is Useful.
Regards
Raghu

Create characteristc with multiple units of measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

Hi,
With Multiple Unit Of measures, I don't think its possible.
You can Use CHAR for characteristics, to Use.
Instead for Fixed Units. Let Marketing/sales Enter the req.
But you shall make it Multiple Selection, Since you can use them in Selection Condition.
Hope this is Useful.
Regards
Raghu

$CL - Create Characteristic with multiple Unit of Measure

Hello Friends,
I want to create characteristic (CT04) which has multiple units of measure. At present a Characteristic is created with a single unit of Measure. I have to create characeristic and assign it in MIC. MIC specifications are customer dependent. Customer may give specifications in different unit of measure. While creating sales order, I am entering the specifications for characteristics, as material is created with varient.
I am creating Single Characteristic multiple times for different Unit of Measure and assigning it to the class.
Therefore according to the Customer requirment and his specifed Unit of Measure, that Characteristic is choosen having same UoM as of Customer.
Insead of doing this, Is it possible to assign multiple units of measure to single characteristic?
Waitng for reply!
Regards,
Kiran

What UOM's are we talking about?
Are you talking about ppm vs. %? Or ppm vs. ppb?
SAP can make some of these conversion automatically. I encourage clients to standardize what their lab people report on in inspection lots. I.e. they should always record ppm or always record % in the inspection lots.
In the certificates you can use the certificate profile to change the UOM actually reported on the COA to the customer. So you can record by ppm in the lab, but in the cert for the characteristic, you indicate that it should be reported in %. The system will automatically make this conversion for you.
If you are talking somethign like screens, I recommend doing all in the lab as either thru or on and doing calculated characterisitcs to calculate the opposite for those customers that want thru instead of on, or vice versa.
FF

ME52N-Create PR with Multiple plants..

Similar Messages

Maybe you are looking for