Me57 and MENGE VALUE

Hi!
I want to change the value of the field MEREQ3214-MENGE before output in t-code me57.
If it's possible please help me with the USER-exit.
Thanks!

Hi Vinay,
In the declaration Part change the TYPE from MENGE to MENGE_D
MENGE is a Structure and MENGE_D is data element for Quantity, Check this in SE11
"Hello your E1STPOM-MENGE is of type NUMC with 15 length because of this your are getting this Issue.
I think you need to catch the correct Field to pass this Quantiy Value Contact your FC
Or you need to Declare your wa_e1stopm again by change the MENGE type(I am not Sure)
Cheerz
Ram

Similar Messages

Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .

Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.

holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{

MBLNR and MENGE in include ZXAPCU05 (Exit MM - AA)

Dear friends,
In T-CODE MIRO, when I have more of one asset for a single item purchase order, I have to make a specific calculation based on the amount of the item that was received in MIGO. This calculation is performed in ZXAPCU05 Exit.
I found the document in MIGO and the amounts received in the table MSEG (MBLNR and MENGE).
I can not find in this Exit the field "quantity received" and / or "MIGO document" at runtime.
How can I do the Exit ZXAPCU05 check the field of MBLNR and MENGE at runtime?
Thanks
GLippmann

Hi Gabriel,
Surely you have one PO. If you have more than one entry, you have various entries in table EKBE. So, do the select on EKBE to a internal table. Instead to select one record from MSEG you will select more than one record from MSEG. After, do the sum for the values of MENGE and MBLNR. Do the process with tcodes SE16 or SE16N. Do a break-point on the exit, get the values por EBELN and EBELP. Search it in SE16N for table EKBE, and after, search again in SE16N for table MSEG.
I hope this helps you
Regards
Eduardo

Avoiding null and duplicate values using model clause

Hi,
I am trying to use model clause to get comma seperated list of data : following is the scenario:
testuser>select * from test1;
ID VALUE
1 Value1
2 Value2
3 Value3
4 Value4
5 Value4
6
7 value5
8
8 rows selected.
the query I have is:
testuser>with src as (
2 select distinct id,value
3 from test1
4 ),
5 t as (
6 select distinct substr(value,2) value
7 from src
8 model
9 ignore nav
10 dimension by (id)
11 measures (cast(value as varchar2(100)) value)
12 rules
13 (
14 value[any] order by id =
15 value[cv()-1] || ',' || value[cv()]
16 )
17 )
18 select max(value) oneline
19 from t;
ONELINE
Value1,Value2,Value3,Value4,Value4,,value5,
what I find is that this query has duplicate value and null (',,') coming in as data has null and duplicate value. Is there a way i can avoid the null and the duplicate values in the query output?
thanks,
Edited by: orausern on Feb 19, 2010 5:05 AM

Hi,
Try this code.
with
t as ( select substr(value,2)value,ind
        from test1
        model
        ignore nav
        dimension by (id)
        measures (cast(value as varchar2(100)) value, 0 ind)
        rules
        ( ind[any]= instr(value[cv()-1],value[cv()]),
        value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
                                           and ind[cv()]=0     THEN ',' || value[cv()] END
select max(value) oneline
from t;
SQL> select * from test1;
        ID VALUE
         1 Value1
         2 Value2
         3 Value3
         4 Value4
         5 Value4
         6
         7 value5
         8
8 ligne(s) sélectionnée(s).
SQL> with
2   t as ( select substr(value,2)value,ind
3          from test1
4          model
5          ignore nav
6          dimension by (id)
7          measures (cast(value as varchar2(100)) value, 0 ind)
8          rules
9          ( ind[any]= instr(value[cv()-1],value[cv()]),
10          value[any] order by id = value[cv()-1] || CASE WHEN value[cv()] IS NOT NULL
11                                             and ind[cv()]=0     THEN ',' || value[cv()] END
12          )
13        )
14   select max(value) oneline
15   from t;
ONELINE
Value1,Value2,Value3,Value4,value5
SQL>

NULL and Space value in ABAP

Hi All,
I like to know, is it NULL and Space value is same in ABAP, if it is not how to check null value.
Thank you.
Senthil

everything is correct though some answers are not correct.
A Database NULL value represents a field that has never been stored to database - this saving space, potentially.
Usually all SAP tables are stored with all fields, empty fields are stored with their initial value.
But: If a new table append is created and the newly-added fields do not have the 'initial value' marked in table definition, Oracle will just set NULL values for them.
as mentioned: There is no NULL value to be stored in an ABAP field. The IS NULL comparison is valid only for WHERE clause in SELECT statement. WHERE field = space is different from WHERE field IS NULL. That's why you should check for both specially for appended table fields.
If a record is selected (fulfilling another WHERE condition) into an internal table or work area, NULL values are convertted to their initial values anyway.
Hope that sheds some light on the subject!
regards,
Clemens

Opening and Closing values on two separate rows for an indvidual A/c?

Hi / Salam To all SAP Members,
I am creating a COGS report in which i need to show opening and closing values for a stock account in two separate rows. The tool i am using is report painter.
What i need to know is how can the system identify between opening and closing values for that account? Which characteristic/s do i need to include in the rows? The table i am using is FAGLFLEXT.
Please provide help.
Regards,
Mohammed Ali Khan.

Resolved Issue.

How to differentiate the EMPTY Records and Null Values in DSO

Hello....how is everyone here?? Ehehehe!
I try to load some data from the flat file which contains some EMPTY data and Null Values for the records. The data type for the InfoObjects of the fields "Quantity" is "number". The sample data from the flat file (CSV) are as below:
Food              Quantity
Hamburger -       12
Cheese        -       0
Vegetable      -               (Empty)
When I try to load the above sample data to the DSO, I get the results of the data as follow:
Food              Quantity
Hamburger     - 12.000
Cheese           - 0.000
Vegetable         - 0.000
In this case, how can the user differentiate whether the records is contain empty value of null values in DSO? This is kinda of hard to differentiate the both scenarios above. Is there any way to differentiate the scenarios described here?
Thanks alot =)

Hi Fluffy,
It depends on the initial values of the data type
The inital values For quantity/Currency/ Numbers it takes spaces as 0
for char it is SPACE
We cannot differeniate between space and null values.
IF you have to force this then define quantity as char and load the data. we will not have units and aggregation in this case.
Hope this helps.
PV

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Union two tables with diffrent count of fields with null and float value

Hello,
i want to union two tables, first one with 3 fields and second one with 4 fields (diffrent count of fields).
I can add null value at end of first select but it does not work with float values in second table. Value form second table is convert to integer.
For example:
select null v1 from sessions
union
select 0.05 v1 from sessions
result is set of null and 0 value.
As workaround i can type:
select null+0.0 v1 from sessions
union
select 0.05 v1 from sessions
or simple change select's order.
Is any better/proper way to do this? Can I somehow set float field type in first select?
Best regards,
Lukasz.
WIN XP, MAXDB 7.6.03

Hi Lukasz,
in a UNION statement the first statement defines the structure (number, names and types of fields) of the resultset.
Therefore you have to define a FLOAT field in the first SELECT statement in order to avoid conversion to VARCHAR.
Be aware that NULL and 0.0 are not the same thus NULL+0.0 does not equal NULL.
In fact NULL cannot equal to any number or character value at all.
BTW: you may want to use UNION ALL to avoid the search and removal of duplicates - looks like your datasets won't contain duplicates anyhow...
Regards,
Lars

Reading and Inserting Value in Long Raw

Hi guys !!
I have a table with 15 columns out of which RESUME column has data type long Raw. I want to copy this table to another table with selectd columns and validation. I want to check whether RESUME column is NULL. How to achieve it ?
Similarly, using VB how to insert and retrieve values in such column ?
thanx in advance
Abhi

do one thing ,
Create a summary item for detail amount column, say m_tot_amt
Set its fol. properties
Calculation Mode : Summary
Summary : Sum
Summ.Blk : Your detail blk
Summ. Item : Your detail amount item
Also, Set Query all records of your detail block as Yes
Then In PRE-INSERT/ PRE_UPDATE of detail block, write
:COP_ORDER_HEADER.DISCOUNT_AMOUNT := nvl(:m_tot_amt,0) ;

Find and replace value in Delimited String

Hi All,
I have a requirement, where i need to find and replace values in delimited string.
For example, the string is "GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~". The 4th column gives month and year. I need to replace it with previous month name. For example: "GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~". I need to do same for last 12 months.
I thought of first devide the values and store it in variable and then after replacing it with required value, join it back.
I just wanted to know if there is any better way to do it?

for example (Assumption: the abbreviated month is the first occurance of 3 consecutive alphabetic charachters)
with testdata as (
select 'GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~' str from dual
select
str
,regexp_substr(str, '[[:alpha:]]{3}') part
,to_date('01'||regexp_substr(str, '[[:alpha:]]{3}')||'2013', 'DDMONYYYY') part_date
,replace (str
         ,regexp_substr(str, '[[:alpha:]]{3}')
         ,to_char(add_months(to_date('01'||regexp_substr(str, '[[:alpha:]]{3}')||'2013', 'DDMONYYYY'),-1),'MON')
) res
from testdata
STR
PART
PART_DATE
RES
GL~1001~157747~FEB-13~CREDIT~A~N~USD~NULL~
FEB
02/01/2013
GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~
with year included
with testdata as (
select 'GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~' str from dual
select
str
,regexp_substr(str, '[[:alpha:]]{3}-\d{2}') part
,to_date(regexp_substr(str, '[[:alpha:]]{3}-\d{2}'), 'MON-YY') part_date
,replace (str
         ,regexp_substr(str, '[[:alpha:]]{3}-\d{2}')
         ,to_char(add_months(to_date(regexp_substr(str, '[[:alpha:]]{3}-\d{2}'), 'MON-YY'),-1),'MON-YY')
) res
from testdata
STR
PART
PART_DATE
RES
GL~1001~157747~JAN-13~CREDIT~A~N~USD~NULL~
JAN-13
01/01/2013
GL~1001~157747~DEC-12~CREDIT~A~N~USD~NULL~
Message was edited by: chris227 year included

Min and MAx Value in a SELECT Statement

Hi,
I have a scenario where I am Selecting the values BETWEEN MIN and MAX values:
SELECT * FROM ABC WHERE CODE BETWEEN MIN(CODE) AND MAX(CODE)
ITS GETTING Error as:ORA-00934: group function is not allowed here
Any help will be needful for me.

select substr(no,1,3)||to_char(substr(no,4,1)+1) "first missing number"
from
with t as
(select 'ABC1' no from dual
union select 'ABC2' from dual
union select 'ABC3' from dual
union select 'ABC5' from dual
union select 'ABC6' from dual
union select 'ABC8' from dual
select no, lead(no,1,0) over (order by no) next_no from t
where substr(next_no,4,1) - substr(no,4,1) > 1
and rownum = 1;

Display and return value in select list.

hi,
i want to display the value in select list coming from this quary .
select student_id from class_record where class_id =:p1_class_id and SECTION =:p1_section
minus
select student_id from STUDENT_TYPE_DETAILS where class_id =:p1_class_id and SECTION =:p1_section;
but i want f_name and last name with student_id .f_name and l_name store in table s_per_det.student is also in that table.
how can i define display value and return value in this quary using 3rd table s_per_det.
How can i do this.
Thanks
manoj

Ooh, MINUS.... Can you not use a NOT EXISTS in this case, could have a big effect on the execution plan?
Something like this perhaps?
SELECT f_name||' '||l_name,
       stundent_id
FROM class_record a,
     s_per_det b
WHERE a.student_id = b.student_id
AND   a.class_id   = :P1_CLASS_ID
AND   a.section    = :P1_SECTION
AND   NOT EXISTS(SELECT 'X'
                 FROM student_type_details c
                 WHERE a.student_id = c.student_id
                 AND   c.class_id = :P1_CLASS_ID
                 AND   c.section = :P1_SECTION)Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Where do we pass tax condation type and condation value in this bapi: SD_SALESDOCUMENT_CHANGE

Hi Experts,
I am using this to change sales order. SD_SALESDOCUMENT_CHANGE
I am passing condation type and condation values for each line item under table parameter CONDATION_IN. Here in which fields do i need pass tax condation type and condation value.
please give me suggestion it is really help ful.
Thanks
laxmi

Hi ,
Pass condition type and condition value in fields COND_TYPE and COND_VALUE under table parameter CONDATION_IN. Also pass 'X' to above fields in table parameter of CONDITIONS_INX.

Display data to edit based on fields and its value defined in internal tabl

I need to display data in a internal table for editing in a screen.
you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
The internal table's structure not fix. you can have any number of fields in the internal table.
Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
have to display data vertically as below in editable format,
for example,
Airline
Flight Number
Flight date
Flight price
Airline Currency
Plane Type
Maximum capacity
Occupied econ.
Total
No of fields will change.
also F4 help needs to be attached with each field.
I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
it will be great help to me..
Sanjeev

Hi
just check out this program DEMO_DYNPRO_STEP_LOOP.

Me57 and MENGE VALUE

Similar Messages

Maybe you are looking for