ME84- Release documents for SA not transmitted
Dear Experts,
After creating release documents in ME84 for a Scheduling agreement, release out put is not trasmitted.
Kinldy let me know what could be the reason for this and where can I correct this.
In header---> Messages, I can see an output type LPH1 with yessow indicator on
Thanks in advance
Regards,
Shashidhar
Edited by: Shashidhar Shetty on Jan 5, 2011 11:49 AM
Hi,
What's the SA Type that was created via MRP.
If it's LP (without release document), release will not do anything BUT
If it's LPA (release document), then you will not be able to Post the GR until release is affected.
Thanks.
Scheduling Agreement can be categories as
1) LP (without release document) and
2) LPA (with release document)
If use LP, you can do GR without release but with LPA, you need to release the schedule line via ME38.
Thanks.
NanoSAP
Posts: 58
Registered: 1/5/09
Forum Points: 6
Re: release strategy for Scheduling Agreement(SA)
Posted: Jun 26, 2009 8:32 AM in response to: sathish.kumar Reply
Dear Mr.Satish,
Thanks a lot for your earliest reply...But my point is i want the system should not allow to make delivery schedule if release is not affected...Though schedule lines are generating through MRP run...Is is possible,by any chance...??
Similar Messages
-
Release Strategy for Credit Note un the QM Module
Good SAP Guru's,
I have a very important question for you:
Is it possible within in the QM module (Transaction QM12) to implement a Release Strategy based on the value of the credit note to be created.
This should work on the same lines as the Purchase Order Release strategy.
Any guide lines and/or assistance will be gratefully appreciated.
Kind regards,
LeslieDear Leslie
We had done a similar kind of development in notification, not for credit memo though , but certainly can be incorporated in this case.We had done this for approving Short shipment and devaitions. If there has to be short shipment to be sent to a customer a notification will be trigered to manager and if he approves it will go for higher approval.
Please find my suggestion for this development
1) Make 3 task codes. for eg Task 1 for credit note is for less than u20AC500.00 . Task 2one for more than 501 and Task 3other one for more than 2001.
2) According the need of the credit notes to be created let the user assign the task and release it.
3) For task no 2 and task No3 a workflow triggers to the corresponding roles Sales manager & General Manager. ( please note that notifications are workflow freindly and standard workflows are available for the same)
4) if Manager wants to approve he can make the Task Complete. ( Notification tasks have 4 stages, outstanding, release, complete, Succussful)
5) Based on the status of the task you can make use of the action box in notification for creating the credit memo.
6) The credit memo creation will have to be developed. You will have to get ABAP support for this. They can either do it through user exit, or call transaction , and incorporate the same in the Action box of notification. (QQMA0001: User Subscreen for Notification Header, QQMA0014 Checks before saving notification )
please let me know your apprehensions
Regards
gajesh -
Release Strategy for PO not kicking in
Hello SAP Experts,
I have gone through all the steps of configuring release strategy for PO. I checked at the end with the transaction code OMGSCK and everything is good with no error. But when I test the strategy by creating a PO, the 'Release Strategy' tab does not come on in the PO Header. This means that the Release Strategy did not work. I have troubleshot over and over again right from the Characteristics/Class, all the way to the Release Strategy, but no breakthrough.
I will appreciate and award points for helpful hints.
Thank you in advance.
Joel.Please list all your char you have created and the value of char.
Than please tell the PO details.
once i got this info than only i can see the problems.
you can do one more thing
goto CL30n and enter the class and class type 032
than hit enter and enter the value of char which you have used in the PO and then hit find initial class button from top menu
see if any release strategy is pulled or not?
if it is determine morethan one that means you have same value exist in more than one release strategy -
Release Procedure for PO not getting applied
Dear All,
I have created a Release procedure for PO, for the field - Order Type. I have defined & followed all the steps i.e., Characteristic, Class, Rel. Groups, Rel. Codes, Rel. indicator & Rel. strategy.
Then i go to CL20N and assign object to class.
But when i create a PO & try to release it in ME29N it says 'Purchasing Doc. cannot be released"
The same release procedure was working fine few days back.
Kindly let me know if i have missed out some steps or someother settings need to be made.
Regards,hi kedar
I tried that, still I get the message "No suitable Purchasing Documents found"
any settings to be checked in characteristics ?
Hey, and one more thing... everytime I exceute ME28 or ME29n, and later when i try to open Class...... i get an error message "Class type 032: Class <class name> being processed by <username>"
Then i have to go and delete in the locked entries, only then I can see the Class.
Rgds, -
Oracle 10g Release 2 for Windows not working
Hi,
I am trying to download oracle 10g R2 for Windows and also some JDBC drivers. But none of the links on the following page seem to be working!
http://www.oracle.com/technology/software/products/database/oracle10g/index.htmlThese seem to be fine so you might want to post additional details about your error. We are not aware of any downtime recently.
-
Norwegian password not transmitted corectly.
Hi
Is there a fix for passwords not transmitting correctly from Norwegian keyboard?
My admin password is complex, and I am not able to remotly log in to my client computers!
Best regards
S.HIf you need the MSI, you can download it from http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi
-
Error in document releasing for credit note
Hi
I am trying to raise a credit note for a sales return order. after saving the document when i go to change mode and try to release the document for accounting,
The system gives an error message as the document is being processed. Due to this activity other entry are also getting held up.I am unable to post next invoice also.
Pls helphi
this is earror comes in release document
so plese chek u vf02 , for billing document their is any pending process and the check ur document flow,
when u release the document it is for save but not complete so u can check account determination ,
revenue account determination is complete r not , so go to vf02 clik on environment tab , and select account determination analysis, and select revenue account, plese check ur account determination,
so u can check in tables also , vbrk, vbrp , tables for status ,
it is help full -
Report for viewing credit limit block released documents
Hello All,
Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
But is there any report at month end to see how many documents were released and who released them Is there any standard report for viewing these or ABAP has to develop them? VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
Regards,
RAJDear Raja,
Use VKM4 t code.
You can see both credit released sales orders and deliveries.
Put Overall credit status as D.
You can see how much value was released, when it was released. But with which user id it was released you cant see it.
Regards
Abhilash -
When releasing a billing document for accounting getting error in VF02
hi,
when releasing a document for accounting in the transaction code VF02 we are getting the following error
<b>" Prof.segment for Prim.cost elements not advisable for costing-based CO-PA"</b>
Regards,
MuraliHi Murali,
Please do default setting for co- object- t code OKB9.
hope it will serve ur purpose.
Reward points if it helps.
Regards
Karan -
Purchase Order not subject to release strategy for contract rel. strategy
Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract. -
Workflow WS00400012 Release for Payment not getting triggred
Hi,
As mentioned in the help docs we have done the following settings for Release for payment, yet the Workflow is not getting triggered.
SPRO->Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Release for Payment
Create Workflow Variant for Release for Payment
XX01 WS004MSBT Payment release
Workflow var. XX01
Currency INR
WF var.name WS004MSBT Payment release
Prelimenary posting release
Release from 1.00
Subworkflow WS00400012
Payment release
Release payment X
Creater permitted X
Payt release 1.00
Pmnt rel.var. CC
Assign Company Code Workflow Variant for Release for Payment
Compamy Code Workflow Var WF Var. Name
XXXX XX01 WS004 Payment release
Define Release Approval Groups for Release for Payment
0001 Vendor A
0002 vendor B
0003 Vendor C
0004 G/L accounts
Define Release Approval Paths for Release for Payment
0001 Vendor high
0002 Vendor middle
0003 Vendor low
0004 G/L accounts
0005 Other
Assign Release Approval Paths for Release for Payment
Workflow Variant Doc. Type Release Group Approval Path
XX01 KR 0001 0001
XX01 KR 0002 0002
XX01 KR 0003 0003
XX01 KZ 0001 0001
XX01 KZ 0002 0002
XX01 KZ 0003 0003
XX01 SA 0001 0001
XX01 SA 0002 0002
XX01 SA 0003 0003
Assign Release Approval Procedure for Release for Payment
Wrkf ApPath Amt To Curr Rel levels Swf Amt rel Swf pnmt rel
XX01 0001 5,000.00 INR 1 WS10000052 WS00400011
XX01 0001 10,000.00 INR 2 WS10000053 WS00400021
Define Relevant Document Types for Release for Payment
Workflow Variant Type
XX01 KR
XX01 KZ
XX01 SA
Define Users with Authorization to Payment Release
XX01 1 1 5,000.00 INR
Assigned Authorization Object
Production manager
XX01 1 2 10,000.00 INR
Assigned Authorization Object
Comp Admin
Carry Out Function Enhancements for Release for Payment
Define Payment Block Reason for Payment Release
Free for payment
* Skip account
A Locked for payment
B Blocked for payment
I CML:InvestorContract
N Postprocess inc.pmnt
P Payment request
R Invoice verification
V Payment clearing
We are using Tcode FV60 for Park Vendor invoice
We are trying to post the Document thru Tcode FBV0 , But the Post field is grey and system shows error: func not possible as document is in not released. The Workflow is not getting triggered. And hence its not possible to release the doc.
The workflows have been activcated
We have done Eventlinkage and activated it.In future when you post question please do some formatting. It seems like a novel.
Have you checked in SWEL whether the event CREATED of Business Object BSEG getting triggered. I hope you have activated the linkage between event and workflow from PFTC or SWE2 transaction code.
Thanks
Arghadip -
Payment release workflow for MIRO documents
Hi,
I have activated payment release function and successfully able to get workflow item for payment release for FI invoices posted through F-43 and FB60, but not on RE documents which are posted through MIRO,
Can some body provide inputs on how to trigger a payment release workflow for MIRO documents.
Thanks
AmanullahHi Amanullah, How are you?
Did you get an answer about this situation ? I am trying to do the same thing by FI or by MM and I'm worrying if we can to do by Standard SAP. In FI I'm trying to do via spro:
SAP Customizing Implementation Guide=>Financial Accounting=>Accounts Receivable and Accounts Payable=>Business Transactions=>Release for Payment
Did you remember how can you get the solution?
Thanks and regards,
Jeovana -
Release procedure for Document Park / Post
Dear FI experts,
We want to set release procedure for Customer Credit Notes (FB75)
For this we did following configuration -
FI >> FI Global Setting >> Document >> Document Parking (all setting w.r.t. release approval)
Created and parked a document using FB75.
In MM procedure we give the authorisaiton of Release code to respective users and then he is able to release the PO.
What is to be done in this case ?
What is the process / tcode for releasing this parked document.
Thanks & Regards
RajeshHi Prem
Thanks for ur reply
I tried MRBR but system is giving following message -
There are no blocked invoices that match your selection
Message no. M8654
In MM release procedure , authorisation of Release code is given to respective users and then he is able to release the PO.
What is to be done in this case ?
Can you please explain??
Regards
Rajesh -
BAPI_DOCUMENT_CHANGE2 for released documents
Hi,
I want to change the classification for a released document. It works for new documents but not for released DIRs. I have tried the BAPI - BAPI_DOCUMENT_CHANGE2. I have also performed a commit after the BAPI but the result does not appear on the database.
Thanks for your help.
Regards
ThomasHi Thomas,
please note it would not be possible to change the classification data when a DIR is in released status from the dialog mode or via BAPI. Therefore the status of the document info record needs to be change first.
Best regards,
Christoph -
How to get change log for fields if change document flag is not maintained?
Hi experts,
My requirement is display the change log details for the transaction FAGLGA32.
In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
How to get the change log details for the fields for which the change document flag is not maintained at data element level?
Regards,
Rameshdo a modification for the data element or try Audit Trail (depends on your release)
Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
cheers
carsten
Maybe you are looking for
-
User-defined variable in selection variant - doesn't work?
Hello, Anyone had any experience of using user-defined variables (type B) in a selection variant? I can't get this to work in 4.7 or ECC 6.0. Seems like a bug - there's no way to specify the name of the variable. The theory behind their use is fine,
-
Hello guys, Following situation; Windows 7 Microsoft Office Word 2010 Adobe Acrobat XI Standard When I create a PDF out of a guideline I created in my office, the PDF would look different than the word dokument... It looks like it forgets several par
-
Got the form, just need to add the field.
Hi! Very new to this. So i have a form that my company has already created with their logo etc. ALL I need, is to add a greyed out field to each question. How do i do that? Do i have to create an entire new form? Thanks!
-
Broken windows with 1.4.2
Hi first let me add that the problem i'm having is only on the current machine i'm working with and i have NOT noticed this on other machines with the same or similar setup (and hardware). i installed jdk1.4.2 and when using swing components they app
-
Can't Optimize/restore Nano (even in disk mode).
My 3rd generation nano was initially synced to a PC. Since then i've gone to macbook pro. Now it won't be recognized by my mac. I can't restore it because it won't show up in itunes. It displays on the iPod's screen (almost immediately after being pl