Meaning of DP in Plant Maintenance

Hello Gurus;
What is DP in the definition given by SAP(PSB)?
Thanks & Regards
Hemant
"Technical Objects (CS-BD/PM-EQM)
Purpose
If DP-supported maintenance is to be set up properly at a company, it is necessary to structure the existing technical systems on the basis of technical objects."

hai,
DP supported means "data processing-supported"
ex:ARGUS has developed and successfully implemented an effective DP-supported method for quality assessment.
Normally its a german usage
If useful reward points please...
regards
rahul

Similar Messages

  • Intercompany Stock Transfer starting from Plant Maintenance

    Dear SAP Experts,
    We are planning to implement Intercompany Stock Transfer Process starting from Plant Maintenance side.
    We would like to be able to order for maintenance work order material which belongs to different plant.
    After adding such material to work order system should automatically create purchase requisition with Item Category U – Stock Transfer.
    Such purchase requisition will be then converted to P.O. Then standard MM process will follow meaning on supplying plant side Delivery & Goods Issue will take place. And on receiving plant side Goods Receipt against P.O.
    Can you please let me know whether there is standard process which covers what was described above especially part on Plant Maintenance side?
    If there is no standard process can you please advise (propose some best practices) how we can realized such request?
    Many thanks in advance.
    Grzegorz

    Grzegorz
    From memory, with intercompany trading you need to create a PO/PR on Company A and a corresponding Sales Order on Company B.
    This can be automated via MM
    I would suggest you ask the question in the MM Forum..
    PeteA

  • Settings for costing data in order types for plant maintenance

    i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

    Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object.  Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
    Assign points as a way to say thanks.
    Madhav Nanduri

  • Urgent Issue in Plant Maintenance Module

    Dear Experts,
    We have requirement as described below, please give us your solutions / comments on this.
    We have GTC company which is having around 800 trucks for transporting the products. I n this company we have implemented SAP Plant Maintenance Module, as we have the maintenance activities done for vehicles.
    Under the same group of companies, we have PM1,PM2,PM3 companies which provide maintenance to GTC. These companies are not external to the group.
    When I raise a maintenance order for a vehicle then I will mention hours of work and material that need to be used in the activity. This maintenance work / labour is provided by PM1/PM2/PM3 company.
    In plant maintenance we have external service management, but that is for external vendors who provide service to GTC.
    But how to handle the same with internal vendors like PM1/PM2/PM3.
    Please tell me how to handle this kind of scenario.
    Thanks in advance.
    Nagesh

    Hi,
    this is a major topic and cannot be covered in a blog. Even if it can it will take a lot of time to clarify. So, first do your checks within your module. Check if u really need to treat the services from the other company as external services. You might as well create workcenters in the plants of the other companies. And make a single maintenance planning plant for all the plants in these companies. This will make a better solution technically. But think also from the perspective of the cost of this solution. Meaning, is it worth doing all the jobs such as maintaining activity prices, work centers in the other plants etc..
    In general, my suggestion is include the FI and CO consultants at least in the discussion. It will b good if u can have the MM consultant also during the discussion.
    Bala

  • Warranty for materials in Plant Maintenance

    Hi Experts
    I am trying to explore how warranty could be used for spare parts in PM. I did following and seems that it works the same way as it works for equipment . meaning that it shows a dialog box when creating Notif and order.
    Step1: Create Material Master
    Step 2: Create Material Serial Number (Equipment master is created in background)
    Step 3: Add warranty information in equipment
    Step 4: Create Notification or work order, the warranty information is displayed
    My Questions is on Goods movement  and benefit by using serial number. I have created 03 serial numbers (1,2 and 3) by using TX IQ01. I have two cases:
    Case1: what are the benefits of serial numbers created above without activating serial numbers in Inventory management.  How it helps in Plant maintenance
    Case2; Assming we activate serial number mgmt in IM ( by assigning serial no profile in material master). How does the serial numbers created above (1,2 and 3 by using IQ01) tie to Inventory management serial numbers. When I receive material for a purchase order how the serial numbers  are assigned and tie to serial numbers created by IQ01.
    Appreciate your help. Let me know if I am not clear.
    Thanks
    Gaurav

    thx

  • Plant Maintenance Activities

    Dear Colleagues
    We are relooking at the configuration in our SAP PM module. Am particularly interested in going with the best practice in allocating the correct Plant Maintenance Activity types to the correct Work Order Types for both Preventative and Unpreventative/Unscheduled maintenance. What is the conclusive list of activity types and what rule or determination can we make in the assignment of these maintenance types to the order types
    Regards
    Gibson

    Dear,
    The advantage of the PM activity types is that, it helps the maintenance department to execute the reports based on PM activity type.Because for some users it may be difficult to execute reports based on Maintenance Order type if you have several types for different plants in same company code.
    And also it helps to trigger automatic "PERMIT" for the maintenance order activities if you configure the "PERMIT" system with classification controls.I mean to say is that, you may be using similar maintenance order type for different activities at shop floor.But only few of them needed "Permit" from safety or process department to execute Maintenance work.In such cases it helps engineering team to have automatic assignment of PERMIT  to the maintenance order.
    WE can not have bench mark for these PM activity types, as this configuration depends upon the business finally.
    You may choose, as follows(This is just example for you):
    Preventive Maintenance - Preventive Maintenance activity type
    Calibration - Calibration maintenance activity type
    Predictive - Predictive Maintenance Activity type
    General Maintenance - Shut down and Oppurtunity and Insulation/Cladding and Painting etc...
    Regards,
    Pardhu

  • Issue related to maintenance package in Plant maintenance module

    Hi ,
    Has anyone worked related to Task lists and Maintenance packages in Plant Maintenance module? i have a requirement where in i have to list all the Task lists whose maintenance packages have been changed.
    i need to get the current maintenance package assigned as well as last maintenance package used and the changed date.
    I need to know where can (i mean tables) we get all these info. 
    Thanks
    Raj

    Hi,
    Has anyone got any info regarding my query
    Regards
    Raj

  • Forecasting in Plant Maintenance Orders

    We have a business requirement to forecast using plant maintenance order numbers.  Is there a way that this can be done?
    When I look at forecasting I can only see forecasting for cost centers and internal order numbers Transaction codes  are KPO6 and KPF6.  Am I missing something?
    Note: I'm guessing this might be a more appropriate place to post - Marilyn
    Message was edited by: Marilyn Pratt

    Hi Elizabeth,
    Do you mean the Planintegarion?
    Kind regards!
    Zhenbo

  • Using SmartForm for Plant Maintenance service order processing

    Greetings everyone,
    I am working in R/3 4.6C and I have a SmartForm that I would like to configure as a shop paper in plant maintenance and print along with various types of work orders.  However, the config in this area only allows configuration of SAPscript forms with print programs and form routines. 
    Does anyone know if there is a way to configure or convert a SmartForm so that I can print it as a PM shop paper?
    I will definitely reward helpful answers/solutions.
    Thanks,
    Geoff

    Thanks for the quick response, Anji.
    So just to be sure, there is no way I can configure this form to work with the shop paper config, correct?  If I want something to automatically print with different work order types, I guess I have no choice but to use a SAPscript form with a print program?  I am just not clear on what you mean when you talk about the Z t-code, since I never want to execute this form directly, but always automatically in work order printing from IW32 or similar transactions.
    Thanks..
    Geoff

  • Plant Maintenance Business Content - MTTR and MTBR

    Greetings to all,
    Was wondering whether anyone has any idea which standard (international?) SAP is following, when developing formulas to calculate MTBR (Mean Time Between Repair) and MTTR (Mean Time To Repair) in the Plant Maintenance Business Contents.
    It will be great help, if there is an indication on this!
    Thks!

    Hi,
    Yes, I have seen those notes. But was wondering whether there's a specific international standard that was followed.
    Thks!
    Rgds

  • Plant Maintenance Datasource for MTBF, MTTR, Availability, Performance

    Hi Gurus,
    I'd like to ask if you know what's the perfect datasource to you for plant maintenance if I were to measure MTBF (Mean Time Between Failures) and MTTR (Mean Time to Repair)? Also if I wanted to measure Availability, Performance and Quality. Thank you in advance.
    - Kit

    Hi
    This topic help me a lot in developing my project. I will contribute more when I finished it.
    Apart from that, you also can ref more resources at: [maintenance KPIs|http://keyperformanceindicators.info/maintenance-kpis/]
    Best rgs

  • Plant Maintenance Order - BADi/user exit for operation change

    I need to send a mail on plant maintenance order (IW32) save event if there is any change in operation - requirement assignment person. Means if the operation is assigned to a person then notify that person on order save event.
    Can anybody help me on this in finding some BADi or user exit?
    Thanks in advance.

    Hi,
    User Exits:-
    IWO10009  Customer Check for 'Save' Event
    BAdI:-
    ALM_ME_001_ORDER      Order/Operation Data
    ALM_ME_ORDER_OPER   MAM 1.0 Order Operations
    IBAPI_ALM_OPR_GETDET BADI for Reading Fields for BAPI_ALM_OPERATION_GET_DETAIL
    Check with these User Exits & BAdI's.
    regards,
    Venkatesan Anandan

  • Problem printing plant maintenance order (DEFAULT PRINTERS)

    Hi,
    I configured default printer in SPRO --> Plant maintenance and customer service --> Maintenance and Service Processing --> Maintenance and service orders --> Print control --> Define printer
    I created 2 plant maintenance orders to test the printings jobs.
    For 2 different orders, I got the following error message in the printing logs (it's in french): INOPÉRANT (means not working in english). What config should I correct. Could the problem be in the orders? Thanks.
    TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 11100942
    000011100942 0010  5210A   YUL_CONTROL#2    2060 Bon de main-d'oeuv  3  VALLIEMA   31.03.09   07:20:53
    000011100942 0020  5235    YUL_ENTR#6       2060 Bon de main-d'oeuv  2  VALLIEMA   31.03.09   07:20:53
    000011100942 0030  5235A   YUL_ENTR#12      2060 INOPÉRANT
    000011100942 0040  5235B   YUL_ENTR#9       2060 INOPÉRANT
    000011100942 0050  5235C   YUL_ENTR#9       2060 INOPÉRANT
    000011100942 0060  5280B   YUL_ENTR#4       2060 Bon de main-d'oeuv  2  VALLIEMA   31.03.09   07:20:53
    000011100942 0070  7230I   YMX_ENT#2        2060 Bon de main-d'oeuv  2  VALLIEMA   31.03.09   07:20:53
    TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 13208581
    Ordre Nº     Opé.  Poste   Uté sortie       APap Formulaire        Cop. Utilis.    Date       Heure
    000013208581 0010  5235A   YUL_ENTR#12      2060 Bon de main-d'oeuv  1  VALLIEMA   31.03.09   08:03:16
    000013208581 0020  5235B   YUL_ENTR#9       2060 INOPÉRANT
    000013208581 0030  5235C   YUL_ENTR#9       2060 INOPÉRANT

    Hi,
    I am not sure but are you trying to print shop papers at default printer specified in config.First thing is are orders released,I presume they are released hence you are getting message.
    Next thing is check config as below:
    Application area - O for maint orders
    Planning plant -  * or define your plant
    Planner group - * or same as above
    Shop paper - Define shop paper or *
    Output device - LOCL or your device property...It is advised to put LOCL as different users can ahave different printers.
    Storage mode -1 for printing only
    then select print immediately and delete after output.
    After this in your master(SU01) define output device as LOCL and this will pick up your default printer of your desktop or working station as configured in windows.
    Also check if right shopapers you have assigned to order type,you can confirm them if you see in print preview.
    regds,
    atul

  • Creating Z report for material stock (plant maintenance module)

    hello,
    we are implemented Plant maintenance module (SAP PM)  in our organization.
    our requirement is to create a stock report which will incldue
    followings:-
    1)material number
    2)plant number
    3) storage location
    4) material type
    5)valuation type
    6)Opening Stock 
    7) OpValue 
    8)Received Stock  
    9)   ReceiptValue      
    10)   Issue Stock          
    11)  IssueValue        
    12)  Closing Stock      
    13)  Closing Value
    we want above details in ALV grid format.
    to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
    opening stock + received  stock - issue stock = closing stock
    opening value + recipt value - issue value = closing value
    we are unable to find table name for  accessing  opening stock,  received  stock , issue stock  & opening value ,recipt value , issue value from system. please suggest table name information for getting above details  for creating Z report

    Dear friend,
    Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
    MB5T Stock in Transit
    MMBE Stock Overview
    MD04 Stock/Reqs list
    MB53 Plant Stock Availability
    MB52 Warehouse Stock
    MB5M Expiration Date list
    MB5B Stock for Posting Date
    MB5T Stock in Transit
    MBBS Valuated Special Stock
    MBLB Stock with Subcontractor
    The possible tables are:
    MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
    Good luck!

  • Unable to create a order in plant maintenance

    Hi,
    I  have deployed BUSINESSPACKAGEs of ERP5 for  PLANT MAINTENANCE,  after deploying i have assigned the roles and configured sso when i go to role maintenance execution and click on create order i can open the screen. but when click on notification and click on create order i could not able to create the order
    The error throughing is iview "maintenance_order" not available.
    Could you please tell for the above iview which BUSINESS PACKAGE is used.
    Regards,
    jagadish

    You need to have Business Package for Common Parts to create manitanance orders, please check these links:
    http://help.sap.com/saphelp_erp2005/helpdata/en/3e/5dd2416d9c1c7be10000000a1550b0/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/fe/5bd2416d9c1c7be10000000a1550b0/content.htm
    Thank you,
    Shyam

Maybe you are looking for

  • Some songs I put on a playlist in iTunes will not show up on my phone.

    This is taking place after the iOS7 update, if that may help. I created a playlist with about 80 songs on iTunes. When I put the playlist on my phone, there are around 10 songs missing. I take the playlist off my phone, put the songs I'm missing in t

  • How to get the list of instanciated object in the JVM ?

    Hi, Is there a way to build a HashMap containing: key: class name value: array of Objects references containing all instance of this class name Thank's John

  • How to append Target File(reciever side) .

    Hi PI Gurus, I have a scenario where i need to append the target file. It goes like this: files(idoc's) keep coming from the source at any time of the day. target file is sent only once in a day. The target file is appended each time a new source fil

  • SOS!Please help me!

    I do a final project about Georaster. My teacher say, I must use ASP.NET to coding with Georaster (including raw data and metadata-XML). It means that I must display a raster image that saved in Georater object on Web by ASP.NET. Some ideas say that

  • ITunes music wont play

    I just restored my computer from a crash, and luckily, was able to reload my itunes library from a norton 360 encrypted back-up. However none of the MP4 files will play on the new itunes 10 version. Anyone else had this problem? please advise.