Meaning of status message

Hi,
Whenever i place the cursor on HD00 line and press the pushbutton for condition records in VA02 i'm getting a message saying below
"Condition type HD00 is not determined using condition records".
What do you mean by this message?
Thanks & Regards
Santhosh

<a href="http://www.google.co.in/search?hl=en&q=ConditiontypeHD00isnotdeterminedusingconditionrecords&btnG=Google+Search&meta=">check out this link</a>
regards,
srinivas
<b>*reward for useful answers*</b>

Similar Messages

How to give out a status message indicating the number of fields selected

Hi experts,
I hope some one might have done what I'm trying to do. Could some one please show me how to give out a status message saying for example how many fields have been give out(or selected) in the t_ouput in an alv grid? Is there a FM that could do this? I mean like giving the FM the t_output and it will show a status message with the number of fields selected?
Thank you for your input.
Nadin
Message was edited by:
nadin ram

Hi Ram,
Write this code,
Message 'Select Only Ten Fields' type 'I'.
It displays The Message in Message Box.
Or if you want the Error Message means,
Message 'Select Only Ten Fields' type 'E'.
Thanks,
reward If Helpful.

IDOC Status message

HI
I have to pick IDOC status message in my report program. For this I am referring the table EDIDS. My doubt is some times the IDOC status message is storing in the field STATXT and some times the idoc status message is storing in the fields STAPA1, STAPA2, STAPA3,STAPA4. How come I know I mean from which field I need to pick status message in my report program. I am giving idoc number as input to the table EDIDS. If possible please send me the sample code to resolve this problem. I will give points.
Thanks a lot in advance.

Hi,
STAPA1, 2, 3 & 4 are the place holder values for the message..
If you have a message in SE91..like
Sales order & created.
The & will be given in the program where it displays the message.
MESSAGE s208(00) WITH vbak-vbeln.
The vbak-vbeln value will be stored in field STAPA1.
Thanks
Naren

Reporting Services Point status message errors.

My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?

Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Continuing the "status message problems" issue...

in response to ralph johns suggestion to delete the buddy list file from my library to solve the outdated status message problem...
RJ- haha.. i'm not sure i'm going to try the "beat it with a stick" approach quite yet.. i think i found out whats causing the problem. when i would use iChat on campus using our school's wireles, i didnt have the problem of outdated status messages. but when i come home, i do.. and i believe the reason is because i'm using a Belkin G Wireless router. although i do hard line, i'm almost positive this is the problem. i did some research online and it isnt one of the approved routers for iChat.
so is my only option to buy a new compatible router to solve the problem? or is there somewhere i can go that can tell me what ports to open for a belkin router?? we're getting close... i can feel it!!! haha thanks..
-brent

Hi Anders,
in order to quickly fix that problem, I would just adapt the provisioning function where the warning shows up and make sure that the function uError is called so that an error is created instead of a warning.
Are you using the SAP Provisioning Framework or a custom provisioning framework. Which repository are you using?
Best regards
Holger

Problem in showing progress image and status message.

Hi, friends,
I have file upload program in which when user uploads the file
i want to show animated progress file
i.e. ( circle.gif )
when upload finishes it should display message :
File < file name > uploaded successfully.
How do i achieve it ?
since when i am uploading file , image is displayed but
due to upload process image is hanged up and did not showing
animation.
Kindly solve the above problem.
i post my some code here.
============================
javascript part is here
function showProgress()
        document.getElementById('imgprogress').style.display = "";
     document.getElementById('imgprogress').style.visibility="";
    function completedupload()
     document.getElementById('progress').style.display = "";
     document.getElementById('progress').style.visibility="";
<div id="imgprogress" style="display:none; visibility:hidden;"><img src="images/circle.gif"></div>
                                                  <div id="progress" style="display:none; visibility:hidden;"><%= status %></div>
                                                  <div id="" style="display:none; visibility:hidden; "><img src="images/circle.gif" width="21" height="21"></div>since it is not working good.
please provide me good solution for this.
i need exactly following :
when user gives big file to upload it shows progress as animated image
and upload process finished up, it should remove image and display status message like " File Upload completed. "

I know this is an old topic, but I found the solution and thought I'd share it! By default, a JList only has 1 visible row. To allow the number of rows to expand dynamically, throw this in.
this.imageList.setVisibleRowCount(-1);My code looks like this. It centers each image and centers the text under the image and wraps images horizontally.
    ListCellRenderer renderer = new ImageListCellRenderer();
    this.imageList.setCellRenderer(renderer);
    DefaultListModel listModel = new DefaultListModel();
    this.imageList.setVisibleRowCount(-1);
    this.imageList.setLayoutOrientation(JList.HORIZONTAL_WRAP);
    this.imageList.setModel(listModel);and the renderer
public class ImageListCellRenderer extends DefaultListCellRenderer {
public Component getListCellRendererComponent(JList list, Object value, int
      index, boolean isSelected, boolean hasFocus) {
    JLabel label = (JLabel)super.getListCellRendererComponent(list, value,
        index, isSelected, hasFocus);
    if (value instanceof File) {
      File imageFile = (File)value;
      String path = imageFile.getAbsolutePath();
      Image image = Toolkit.getDefaultToolkit().getImage(path);
      image = image.getScaledInstance(100, 100, Image.SCALE_DEFAULT);
      ImageIcon imageIcon = new ImageIcon(image);
      label.setIcon(imageIcon);
      label.setText(path.substring(path.lastIndexOf(File.separatorChar) + 1));
      label.setVerticalTextPosition(SwingConstants.BOTTOM);
      label.setHorizontalAlignment(SwingConstants.CENTER);
      label.setHorizontalTextPosition(SwingConstants.CENTER);
    else {
      label.setIcon(null);
    return label;
}I need to work on this to improve performance, but it works!

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Sending An Error Message as Status Message

Hi,
I have a selection screen which was (Object Oriented program ) defined through Function Group and calling via Function Module. when the transaction Starts with selection Screen and we have few buttons on the selection screen, when we enter data and we need to press F9 we are validating the data and we need to give an error message, i am doing same, but the error message was coming as pop-up, once i click on the pop-up it is getting out of the selection screen. but actual requirement was it has to stay
back on the selection screen.
Is there any way to give the error message as status message instead of
pop-up.
Thanks In Advance.
Regards
Nags

Hi,
We have an option to set this, the last button of the menu(button will be in multiple colors) , press that and select the settings, a pop up will open, there in one of the tab, you can select the option to display the mesage in the status bar
Regards
Sudheer

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

How to stop HP Annoying Status Message Windows?

Before posting this message now (July/2014) I've searched for related posts here. I found one from 2009, whose author got a solution through an answer only in 2012 (pasted bellow). I have the same problem: I'd like to stop the invasive alert messages from HP Solution Center without uninstalling the software, which is very good, but for these annoying stupid messages. I say stupid messages, because everytime I seat in front of my desktop it insists telling me, for example, that I have a problem: the language in my HP printer doesn't match the language in my computer. But this is not a problem, it is my personal option! Anyway, HP Solution Center keeps poping up everytime I awake my screen and this is really annoying, even it its messages were accurate. HOW TO STOP THEM? As I said, the solution found here in the forum after 3 years (2009-2012) doesn't work for me, because there is no "status messages" in my "device settings" (Windows 7), so I could turn them off. I'd appreciate any help!
SOLUTION: To stop HP Annoying Status Message Windows.[ Edited ]
‎05-26-2012 01:05 AM - last edited on ‎05-26-2012 10:13 AM
Hi, Friend I have solution how to stop HP Annoying Status Alert .
WIndows 7
First Click START>CONTROL PANEL>PRINTERFAX>
Select Your Printer And Go to Properties
Click Device Setting > Select Status Message OFF Option
Press APPLY And Ok
Reset Your Computer

Hello Fernando_int, and welcome to the HP Forums.
I see you are recieving false errors. I would like to assist.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to send status message in SOAP to IDOC scenerio without BPM

Hi,
I have a SOAP to IDOC scenerio in which we require to send the status message back to user from XI that " IDOC has been sent successfully to SAP system"
We do not want to use BPM bacause of performance issues.
Can you please help me how to achieve this synchronous response without BPM.
Note: We require the status message from XI that the IDOC has been successfully posted to WESAP system

Idoc only support async behaviour. U can't get the Idoc response as per ur requirement without BPM.
Better to go for abap proxy or RFC.
Or u may get the ack till XI.
Regards,
Prateek

How to Read Idoc - Segment fields values and status messages

Hi,
I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
is there any other table which contains the information of IDOC segments and field values and also the status messages.
Regards,
Kumar

You need to use
V_MSGNO = EDIDS-STAMNO.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    MSG_ID   = EDIDS-STAMID
    MSG_NO   = V_MSGNO
    MSG_VAR1 = EDIDS-STAPA1
    MSG_VAR2 = EDIDS-STAPA2
    MSG_VAR3 = EDIDS-STAPA3
    MSG_VAR4 = EDIDS-STAPA4
IMPORTING
    MSG_TEXT = V_TEXT.
WRITE: / V_TEXT.
a®

Problem In F110 with status message " Payment run has been released "

Dear Friends,
We have an Strange issue in payment program...
While executing the payment program they got below Status Messages
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
*Payment run has been released 13.05.08 15:42:58
Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
With same parametrs we have tried to run another payment run but there is no proposals selected...
Question :
1) How can I delete 1st Payment Run Proposal as well as Payment ID's
Could you please Advise Neccessary actions which is required for solving the issue...
Thanks in Advance
Regards
Suresh Polineni

You can delete the payment run proposal in the following sequence
1) first delete the output file
Edit-Payments-Delete output
2) delete the proposal file
Edit-proposal -Delete
3) if u want delete the parameters also in the similar way.
for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
I hope it will provide some clue to clear your problems.
Regards
Madhav

How can I insert the reusult of a failed test of a secuence in the status batch result status message box ?

Hello, I'm totally new to programming. I started with LabView and test stand to make some test as VI's. When test stand secuence ends, the batch result box (batchmodel.seq) pops out for the several uut's tested in every socket. I'd like to add to the status message the information fo the test wich failed instead of searching this info in the xml (or html) report.
Joel Urbaez
Test Engineer ,
Napco Alarm Lock Intl. Group.

Hi Joel:
Every report in TestStand comes with message on top of the report (below the header) that tells you which step in the sequence caused the failure. Hence, you do not need to read through the entire report to get this information. If you still want to use the banner to report this information you can do the following:
1. After the sequence has executed you will have to add a step in the Post-UUT sequence.
2. Here you can either choose to show a message popup where you can display the step that failed
3. You would have to use the following variables:
If ( RunState.Sequence.Locals.ResultList[0].Status = "Failed") ? RunState.Sequence.Locals.ResultList[0].TS.StepName
4. You can also try to modify the modelsupport2.dll file for the functions that bring up the popup banner to add more information.
Thank you
Nandini
NI

IChat will not display status messages.

I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
Any help?
Thanks!
Message was edited by: Paperclippe

Ok,
As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
BUT you went on to mention that the Available Choice also does not display.
This would suggest one of two things.
1) Either you are not fully Logged in to the AIM servers properly
Do your Buddies see you are On-line and Available ?
Do they perceive your Status change ?
Can you Text chat to people ?
Can you send files or Pic in Text chats ?
Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
In this case try deleting com.apple.ichatAgent.plist
This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
I would do these one at a time just so you know which it was that fixed it.
8:27 PM Friday; June 20, 2008

Meaning of status message

Similar Messages

Maybe you are looking for