Meaningful names for report attachments in BIP.

Hi,
I am emailing/ftp'ing few reports from BI Publisher. The report attachments are going out as attchment.xls, attachment.out, attachment.pdf etc. I wouldl like to name these attachements with a meaningful name. Example if Accounts is my report I would like the attachmnet to be sent as Account.pdf, Account.xls etc. Is there a way we could do this? Please advice. Thanks in advance.

Hi,
I am using bursting just to get dynamic report name. In the Report UI, I have all the data model, layout defined and I ran it before and got the data. Now since I want to get dynamic report name I went into the Bursting option in the UI. Here it asks me for 'Split by' and 'Deliver by'. I am not sure what do give here. Also the 'Sql Query' box..do I enter any sql here or would it automaticcally take the sql behind my 'Answers' report. I tried ot pick one column for 'Split by' and other column for 'Deliver by'..and I checked the 'enable bursting' check box. When I try to save it it gives me an error "Bursting setting is invali. Please make sure all of Split by, Deliver by, bursting query setting are set properly"
I just have no clue what to do...the documenations do not provide any deatail info. Any help is greatly appreciated. Thanks.

Similar Messages

Pls Suggest server names for Reporting Server and Shared Services

Hi,
Can any one Pls Suggest server names for Reporting Server and Shared Services
Thanks in advance.

Report server name: OrclRpt
Shared Services: OrclSS

Customized name for report instances under publication (BOXI 3.1)

Hi All,
Is a there any way to have custom name for the report instances under publication history (default enterprise location). I can see we can customize report instance names using placeholders if destination is email or local drive or enterprise inbox, but doesn't have similar option under publication history.
Basically we have a Agency Report which has to be distributed to individual agencies through email while another copies will be maintained under publication history. But unfortunately there is no way (as it seems to me) to find out which report instance is for which agency (unless one manually opens and checks the report).
So my query to you is that, is there any work around to customize report instances name under publication history.
Thanks in advance.
Regards,
Mukesh

Hi,
My client has exactly the same requirement; for instances/documents to be published to default location with custom instance and document names.
I'm really struggling to find any built in capability to do this however I hope I'm wrong on this!
At the moment I'm writing a publication extension to do this but again I hope this isn't necessary!
Does anyone know if this is possible?

File name field not generating dynamic file name for report printing

Hello Folks,
I have a report region on a page and have enabled report printing. I would like to have the file name generated dynamically. So, I add the substitution string, say "&P1_CUSTOMER_NAME." (no quotes). The output file I get is literally named "&P1_CUSTOMER_NAME..pdf" (no quotes).
I have seen several posts suggesting the file name field should accept this syntax but, I cannot get it to work.
We are running Application Express 3.2.0.00.27 and BI Publisher.
Any suggestions?
Thanks for your help.
-Markus B.

I was finally able to make it work using a page process and the APEX_UTIL.DOWNLOAD_PRINT_DOCUMENT with a submit button.
-Markus B.

Dynamic file name for report export to csv

If "Enable CSV output" = "YES" for a report region titled "Invoices", the default file name is "Invoices.csv". If I have a parameter, Pn_MONTH, for the month (e.g. Jan 2010, Feb 2010, etc.) and the report only shows data for that month, I would like to have the resulting file named "Invoices_Jan_2010.csv".
I've tried setting the Report Export Filename to "Invoices_&Pn_MONTH..csv" and setting the region title to be "Invoices_&Pn_MONTH." but the resulting file name is coming up as "Invoices_.csv"'. I even tried "Invoices_:Pn_MONTH.csv" just to be sure but that makes it "Invoices_:Pn_MONTH.csv"'.
How can I get this to work?

This same method works for generating dynamic column headings from other page items, but I've never tried it for the download file name.That's the problem. The parameter P_MONTH is itself a page item and this is not consistent with other dynamic substitution. Looking at the page source, the export link is
f?p=102:9:8985946323211742:FLOW_EXCEL_OUTPUT_R2805111921107129_en-uswhere presumably "FLOW_EXCEL_OUTPUT_R2805111921107129_en-us" is an application process and "2805111921107129" is the internal id of the region. The filename is not part of the link.

Get Report Name for Report Painter

Hi Gurus,
I need in an ABAP program to find dynamically the name of a report generated via Report Painter and associated to a TCODE.
I got the tcode.
How i can find it? I find the cluster number in GRRT but i don't know how to convert it in my report name (or even if i'm on the right way)

Hello Clemens,
as soon as the report is associated to a transaction code, it should be in TSTC
Not necessary
You create a parameter transaction when attaching a tcode to a report painter report which gets stored in TSTCP.
Cheers,
Suhas

Tables name for Customer Payment Report

hiiiiiiiiii
can anyone tell us the tables name for the report customer payment receive..?
Thanks & Regards
Rekha sharma

Hi Rekha
when you pass following entry
Bank dr
to Customer
All header data like co code currecy ref , period etc goes to BKPF,
line item - Bank Dr ( its a GL entry ) goes to BSIS
line item- Customer Cr ( its a AR entry ) goes to BSID or BSAD depends it is cleared or still open
Also both the line items goes to BSEG
Hope this helps.
Regds
Rajiv

Report for vendor no., vendor name for good receipt documents on KSB1

Hello,
My client needs vendors on KSB1 report. I told them about offseting account, but it doesn't show vendor for good receipt documents.
Is there any place else they can view vendor, vendor name for those good receipt documents .
Any MM report or AP report .
Thanks,
T.G

Hi,
Please go to FBL1N, In Dynamic Selection give document as "WE", this will give and enable Purchase Order Number
This will give you Vendor Name, Purchase Order and FI Document number or u can try MB51, there you will not get Vendor Name, but you will get Vendor Code, Material Document Number and Purchase Order Number
Br,Vivek
Edited by: View_taurian on Oct 22, 2011 12:01 AM

Report name for gr/ir

what is the report name for viewing pending GR/IR.
I mean we want to see vendor wise pending IV for whcich GR is completed.

go to ME2N then select dynamic selection button(red green button)
then in pur doc item
here select the del comp indicator
here select X for this and then execute
Also
Run ME2L report with Selection Parameters RECHNUNG Open invoices.

Define Logical Systems and Template Names for BW Reports

Hi experts
I would like to know if someone used the mentioned functionality 'Define Logical Systems and Template Names for BW Reports, I would like to know too IF I create a Z REPORT for example in webdynpro and insert it in this configuration it will work and where it will appear in sourcing cockpit?
sds.
Javier

Hello Muthu,
BW reports will be shown in SRM Box if the corresponding BW roles for SRM are integrated with SRM roles.
You might to activate the corresponding datasource of this in SRM.
And since you have to connect the source system to BW, I think you have to define SRM system as logical system in BW.
Regards,
Pavan

Urgent please help: what is the table name for cash management reports?

I am wondering what the table name for cash management reports is. I am trying to figure out then if I have any missing.
Please help.

I checked MSEG table. But, I didn't find any field for date.
Can you tell me field name.
Regards
Siva

Editing the Query name for all reports in PRD.

Dear All,
I have created 25 reports using Query Designer.We have moved all the reports to BI Production. And Clients are using these reports using the Tool Bex Analyser.
Every time they are navigating through open Query -> Info Areas -> Data targets and Query.
Instead of going this way, is there any other way to Open a query easily.
And they wants to modify the Report name and the Technical name for all the reports. Can we able to edit the Query name for all reports, or do i need to go for SAVE AS for all querys.
Pls Suggest.
Thanks,
Ram

Hi Ram,
1. For the first question; if it user specific query then ask the users to save them at the FAVORITES so that there is no need to go to the dataprovider specific.
Or they can create the reports as favorites user menu screen of that particular user.
2. In order to change the technical name and description of the queries goto RSZC t-code> give the source and target infoprovider as same> select queries>click on the reports>click on transfer selections-->
Then you get a screen to change the description and technical name.
But this is pertained to Infoprovider level.
You can see all the reports on the infoprovider (cube/ods).
Hope you understood.
Regards,
Ravi Kanth

Report name for services where used in task lists

plz let me know report name for services where used in task lists.

Hello Sairam,
I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
If you want a specific one then please provide more details
Thanks
Amber

Table name or report to download materials for storage location

Hi ,
Please let me know table name or report or tcode to download material for storage location . I know MARD only. Apart from that table any other please let me knw
Thanks in advance
Smitha

Hello,
For Material , Plant and storage location report, in SAP Std reports are available.
1)MC.6
2)MC.9
3)MB5b
4)MB52
or else get directly from table MARD through SE16 tcode.
Regards
Mahesh Naik

Need to identify Table or Report Name or Transaction Name for mapping roles

In PFCG transaction, we can see the simple roles available inside a composite role.
But I want to identify the table name or report name or transaction name which will help me to identify simple roles for all composite roles.
Looking for your soonest reply.
With Regards,
Santanu Samantroy

Thank You for your quick turn around.
This table can help us to find out the simple/derived roles inside all composite roles at once.
Do you have any idea, of any report/transaction can provide the same result.
Similarly please let me know, if there is any report/transaction/table which can provide mapping of all simple and derived roles.
Transaction code SUIM does not provide this facility.
Thank You once again.
Santanu

Meaningful names for report attachments in BIP.

Similar Messages

Maybe you are looking for