Means of transport change update to SNC5.1

If we change the Means of trasport in r/3 sales order, then this update should be send to SNC5.1 Is this mapping is done thru ORDERCH ?
We have done ORDERSP mappings for order confirmation. Now issue is that when we do the change in r/3 sales order in means of transport that should be updated in SNC.
Thx

Hi Vaibhav
Means of transport is the basic master data and in general it is created in SNC system manually even though the data is available in SAP ERP
The behavior can be changed so that the SNC does not create means of transport from SNC master data and the data should be picked from IDOC with the help of coding.
Now question is how many different means of transport does this customer have? I could imagine many resources, but means of transport is mostly just a few
Upon which basis does the planner decide which means of transport should be taken???
Best Regards
Vinod

Similar Messages

TLB Order changes means of transport

Hi Experts.
We are using TLB to create transport loads.
We have a pair of source location and destination location, where a product is maintained for two means of transport MODE1 & MODE2
When TLB order is created in APO it is created for MODE1 and saved in APO. When It is transferred to R/3 the order coming back from R/3, it shifts to other means of transport.
Let me know why this happens and what is the way out.
Thanks in advance.
Nitin Thatte

Hi Nitin,
Before we get the reason of the change in Mode od Transport, please tell me when the order goes into SAP from APO does it have the same mode of transport in SAP as was in APO. Is there any manual intervention in SAP side for changing the mode of transport ?
Thanks,
Harsh

Changing of Means of Transport for deployment order

Hi All,
Is it possible to manually/ programatically change the means of transport of a deployment order ? for example once deployment has run, it has created a deployment order with means of transport, lets say, 0001 ( Truck). Now i want to change the means of Transport to 0003 ( Air). Is it possible using some BADI etc ?
Pls note that i know that by assigning product speciic means of product of 0003, it is possible to directly create deployment order for 003 means of transport. Due to some requirement, we want to change it manually.
Regards,
Pawan.

Hi Senthil,
I tried that option already. Infact there is no need to delete existing deployment order, you can simply run deployment with replan all option. This will create deployment orders on the new means of transport. What i wanted is, without running deployment, is there some option possible wherein i can change the means of transport of an existing order, which is already created on another means of transport ?
regards,
Pawan.

Bapi to Update Mnstransty (Means of transportation) in Inbound Delivery

Hi Guys,
Can you please let me know any BAPI which could update the mnstransty field (Means of Transportation ) in the Inbound Delivery. BAPI_INB_DELIVERY_CHANGE is not fulfilling this need.

Hi ,
u Can try this
V50I Delivery BAPIs
BAPI_INB_DELIVERY_CONFIRM_DEC BAPI for inbound delivery verification from a decentralized system
BAPI_INB_DELIVERY_SAVEREPLICA BAPI Function Module for Replication of Inbound Deliveries
BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Verification from a Decentralized System
BAPI_OUTB_DELIVERY_SAVEREPLICA BAPI Function Module for Replication of Outbound Deliveries
BAPI_OUTB_DELIVERY_SPLIT_DEC BAPI for Subsequent Outbound-Delivery Split from a Decentralized Syste
V50R_CREA Create Delivery from Delivery Due List
BAPI_DELIVERYPROCESSING_EXEC Delivery Processing: Deliver Preceding Document, Expand Delivery
thanks
anurag

Update Means-Of-Transport Type in a sales order

I want to Update Means-Of-Transport Type in a sales order. You can find this field (VBKD-TRATY) in Sales Order->Header->Shipping.
I couldnt find this field in BAPI_SALESORDER_CHANGE.
Is there any function module which wud update it?

Means of transport will be decided at the time of shipping in delivery .
So LIKP-Traty will be the means of transport .
i dont think there is a Fm to handle this .
Let us check if someone has a solution.
regards,
vijay

Safety days supply not followed due to change in Means of Transport in SNP

Hello All,
I am facing a strange issue regarding the SNP heuristics and means of transport. We observed that the system was not respecting the safety days supply. For example if we had a receipt in bucket 'N' and there is a violation of safety days supply in bucket 'N-1'. When we un a heuristic ideally system should delete the receipt in bucket 'N' and create a new one in bucket 'N-1'.
But we observed that the system is retaining the existing receipt in bucket 'N' and also creating a new one in bucket 'N-1'. This is making the available days supply to increase manyfolds and the whole plan looks inconsistent from Safety Days point of view.
After analyzing the issue i observed that if we have existing receipts using a Means of Transport 'X'. Now if we run the heuristic using a Means of Transport 'Y' then the system doesnt touch the existing receipts. If I run teh heuristics using the existing Mean of Transport then it works absolutely fine.
Kindly suggest.
Regards,
Abhi

Hi,
when you check all products flag it means the means of transport is available for all products and not product specific, to select the MOT for SNP you need to check the aggrgtd plng flag.
Also safety stock has nothing to do with MOT, SNP heuristic plans based on checks the quota arrangement if its for multiple MOT it will distribute the PR based on the ratio in quota if both MOT are able to meet demand on time, otherwise it will violate quota till the time both MOT are not capable of meeting the demand on time.
If no quota is defined it will check for which lane is able to meet on time n if their are multiple lanes which can fulfill demand on time then it will choose MOT with less cost.
Have you got multiple MOT for a source destination combination to be considered for SNP heuristic?
Just check your design again and explain the problem again as this is not the standard expected behavior.
Thanks,
Sanjog

Return code : 12 while transporting change request

Hi,
When i tryin to import a change request i am gettin a return code:12....i tried re-configuring STMS on my stand alone PC still no hope.
Can u plz help me wt actions can b performed.
Thanks and Regards,
Malti

Hello Malti,
Return code 12 usually means the transport tool problem. You can start with updating the TP and R3trans with the latest patch on the SAP Service Market.
Regards,
Joe

How to check open deliveries and open sales order using means of transport

Hi,
I want to check open sales order and open delivries which is having "ABXP" means of transport type .Can anybody suggest me to check in which table or any transa

means of transport type
Please reconfirm whether the above statement is correct. Moreover, you yourself can check at your end by opening any sale order, go to that field, press F1 and press the "Technical Information" icon so that you can see the corresponding table name and field name over there.
G. Lakshmipathi

How to make means of transport field as a mandatory field in MV45AFZZ

Hi All,
I am new to User-Exits.
In Sales Order creation I have got a requirement In such a way that based on Sold to and Shipto Party Combination of sales order
I have to make Means of Transport Field as a Mandatory Field.
I have gone through the Program MV45AFZZ.
Please let me know how to do it .
Regards.
Rohit.

Hi ,
Write code in Save_Document_prepare In program MV45AFZZ.
Constant :c_flag type c .
if c_flag eq space.
IF VBAK-VSBED EQ '01' AND VBKD-TRATY IS INITIAL.
MESSAGE E0001(SABAPDOCU) WITH 'Enter means of transport'.
endif.
c_flag = 'X'.
endif.
Regards.
Eshwar.

The necessary shipping materials and the means of transport

The answer of the question below is "d. Shipping point". On the other hand, shipping type (shipment type determines how the goods will be transported - tuck, train, ship etc....) is entered in the "shipment type" at the customization.
Taking into consideration this fact, why is the answer of this question is given as "shipping point"?
What part of the company is responsible for the type of shipping, the necessary shipping materials and the means of transport?
Only one answer is correct.
a. Sales Organization
b. Transportation planning point
c. Shipping condition
d. Shipping point
e. Warehouse

hi
As per my knowledge, normally goods are transported from Plant through shipping point, So ultimately shipping point is the responsible for that.

Function Module to Change / Update BOM Line Items

Hi,
I need a Function Module to Change / Update BOM Line Items.
Please help.
Thanks.

Try this FM - CSAP_MAT_BOM_MAINTAIN

Means of transport in sales order

Hi all,
i want to enter some data in field "means of transport" in sales order Header data in shipping tab, but i dont have any values maintained there, where do i maintain the data of means of transport so that i ll reflect in F4 values of my sales order.
plz advice.
thanks in advance.
kumar.

Hi.,
SPRO-LOGISTIC EXECUTION-Transportation-Basic transportation functions-routes-define routesdefine mode of transportation
REWARD If helpfull
Srini is right
Thanks & Regards
Narayana

Planned Delivery Time and Transportation duration- Tlane and Means of Transportation

Dear Experts ,
I have question regarding lead time calculation my SNP
I have
Start Location : A
Destination location: B
I maintained Planned delivery time in ECC- material master as 10 days and cifed to Tlane Product procurement as 10 days
and leave empty in the transportation duration empty so the total lead time is 10 days from start location A to destination location B
now
I maintain 24 hours in Means of transport as transportation duration by truck
now the lead time is 11 days from start location A to destination location B
Now
i leave empty planned delivery time empty and maintain Means of transport duration as 48 hours
so the lead time is 2 days from A to B
does my understanding is correct or not advise please
Regards
Raj

Hi Raj,
Take a look of these notes. Specially SAP note 379006. This note explains how the system sets the times in ECC and APO. Basically, It recommends a BAdI in order to match the delivery date in ECC and APO (transit time). What I recommend is to set delivery time equal to 0 if this is possible in your company.. This is not an SAP recommendation, because the delivery date is a key master data in the purchasing process and making it equal to 0 could not be allowed.. Now, if its possible in your case, it is the easiest way to ensure consistency...
These are the notes:
379006
- Transport duration and planned delivery time in APO and R/3
441622
- Supplying-plant-dependent planned del. time/trans. time
624982
- Incorrect dates for RBA controlled stock transfer
Kind Regards,
Mariano

Extending Validity of Means of Transport in TL

Dear All,
Couple of questions:
1) Is it possible to extend the validity of a Means of Transport in a Transportation Lane by increasing the
End Date?
2) Is it possible to increase the end date for SKU maintained on this lane?
If yes? how?
Many Thanks and Regards
Amod

Hi Vaibhav,
Thanks for your inputs.
I knew the entries could not be edited. I had tried it earlier before posting this message. Neither the means of transport nor the SKU end date is editable.
As you have mentioned, I had already tried deleting the entire entry in means of transport and SKU list. Before trying to delete the entries I had deleted all transaction data on this particular TL for all SKUs existing on this lane. But the meassge I get every time is "There are orders existing on that particular means of transport or for that particular SKU".
Futher investigation reveals that both the means of Transport and the SKU still have orders existing in test version which I have copied.
I know I can create a new means of transport with validity start date matching with the end date of the earlier means of transport. The same thing can be done for SKU's on this TL as well.
My question to you and other experts on this forum "Is there still some way in which I can increase the validity and avoid creating multiple entry for same means of transport and same SKU on a particular TL?"
Thanks for your help
Regards
Amod

Basis of picking means of transport in APO

Please help me in understanding basis of picking means of transport in APO and what is the link between R/3 means of transport and APO means of transport.
Manish

In R/3 the means of transport is recorded in Shipment document. It contains all the information necessary for carrying out transportation. The means of transport necessary for a shipment is reflected in the system as a handling unit. These handling units contain information about tare weight and -volume of the means of transport as well as the weight of the packed handling unit. Information about the country providing the means of transport, details about the driver and travel time are also included in these handling units. Handling units that have already been created for delivery items are copied into the shipment document where they can be packed further, if necessary. Delivery items that have only been partially packed or not packed at all can be packed in the shipment documents.
In APO the means of transport is planned in TPVS. If the client do not have TPVS implemented, the means of transport are taken based on the locations, products and cost as well.
The difference between the R/3 and APO means of transport I see is that in APO there is product specific means of transport wherein we can assign the means of transport for specific products based on its demand or perishability. For example, if we have a Tlane between US and Ind, the possible means of transport could be by AIR or by Water. For a product which is a primary and active product for a company, the means of transport can be assigned as Air rather by water.

Means of transport change update to SNC5.1

Similar Messages

Maybe you are looking for