Meas&Auto Explorer Fails to see any Devices

I cannot find any of my PXI-instruments in M&A Explorer. I'm running LV 8.0.1.
Checked the Windows System, and all the devices show up as installed and operating properly.
Re-installed (repaired) M&A Explorer, per technica;l support suggestion.
Tried refreshing.
Nothing shows up, hardware, software, etc. in M&A Explorer. I have 9 PXI instruments installed, plus the controller.
Suggestions?
73/gus

KR4K,
One thing that has worked for me in the past:
Make sure MAX is closed. Go to C:\Program Files\National Instruments\MAX (or wherever MAX is installed on your machine). Then, either delete the Data directory or move it out of the MAX folder (depending on how brave you are ). Then restart the machine just for good measure. Then open MAX and try searching for instruments. This forces MAX to rebuild the config files that were in the data directory and has fixed this problem in the past for me.
RossC

Similar Messages

Solaris 10connectivity to EMC: failed to configure ANY device on FCA port

I'm connecting a E2900 server with a EMC symmetrix storage with fiber channel.
But I'm getting the following errors, and I'm not able to see the external disks. Any help is really appreciated.
bash-3.00# cfgadm -al
c3 fc-fabric connected unconfigured unknown
c3::5006048c52a5b746 unavailable connected unconfigured failed
c4 fc-fabric connected unconfigured unknown
c4::5006048c52a5b749 unavailable connected unconfigured failed
bash-3.00# cfgadm -c configure c3
cfgadm: Library error: report LUNs failed: 5006048c52a5b746
failed to configure ANY device on FCA port
bash-3.00# tail -f /var/adm/messages
Nov 27 16:42:12 cosemm1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Nov 27 16:42:12 cosemm1 Unsupported LUN Addressing method 40 in response to REPORT_LUN
bash-3.00#
SO is Solaris 10 and I have installed recommended pathes:
118833-36 SunOS 5.10: Kernel patch
125100-10 SunOS 5.10: Kernel patch
120011-14 SunOS 5.10: Kernel patch
127111-01 SunOS 5.10: Kernel patch
119130-33 SunOS 5.10: Sun Fibre Channel Device Drivers (only necessary for Leadville Stack driver)
125184-04 SunOS 5.10: Sun Fibre Channel Device Drivers.
120222-21 SunOS 5.10: Emulex-Sun LightPulse fibre channel adapter driver v2.20k (only required for Emulex HBAs running Leadville)
125166-06 SunOS 5.10: Qlogic ISP fibre channel device driver v2.22 (only required for Qlogic HBAs running Leadville)
122640-05 SunOS 5.10: zfs genesis patch (require for zfs)
120473-12 SunOS 5.10: lib nss ldap PAM zfs patch (require for zfs)
119090-24 SunOS 5.10: iSCSI device driver and utilities
Also I have modified /etc/system adding those lines:
set ssd:ssd_max_throttle=20
forceload: drv/ssd
bash-3.00# modinfo |grep qlc
66 7ba7e000 ce1f8 282 1 qlc (SunFC Qlogic FCA v20070717-2.22)
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm qlgc
Found Path to 2 FC100/P, ISP2200, ISP23xx Devices
Opening Device: /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Opening Device: /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Complete
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 610f13 0 5006048c52a5b746 5006048c52a5b746 0x0 (Disk device)
1 617613 0 2100001b320122b7 2000001b320122b7 0x1f (Unknown Type,Host Bus Adapter)
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 620f13 0 5006048c52a5b749 5006048c52a5b749 0x0 (Disk device)
1 627613 0 2100001b32014eb8 2000001b32014eb8 0x1f (Unknown Type,Host Bus Adapter)

Check the configuration on the EMC side. This error message is the heart of the problem:
"Unsupported LUN Addressing method 40 in response to REPORT_LUN"
A quick Googling leads me to believe this means you're trying to assign a LUN ID higher than 255 to the host.
Best of luck!

I am trying to sync my ipod touch. Previously I had an ipod nano, when I hook up the touch I can't see any devices so I can sync it.

I am trying to sync my new ipod touch with the music already in my itunes library that I had for my ipod nano. I am unable to see any devices in order to sync my music. What do I do?

Hey suzq123,
Thanks for the question. I understand you are having issues with your iPod touch appearing in iTunes for Windows. The following article may help to resolve this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Can't see any devices hooked up to Sata ports #5&6 on K9A2 Plat board

Hi there, I'm new to this forum.
My virgin system consists of
MSI K9A2 Platinum, Bios 1.4
4 GB Corsair
CoolerMaster Silent Pro M600
AMD Phenom II X4 940
Zalman CNPS9700NT
Visiontek ATI Radeon 4850
SuperTalent 64GB Sata II SSD
Samsung SH-223 DVD-RW, Sata II
LiteOn CD-RW IDE
I can get into BIOS and see devices hooked up to Sata ports #1 to #4, but I can't see Sata ports #5 & #6 with any device connected to those ports. I know these Sata ports are connected to a Promise T3 controller.
1. Do I need to install the Promise driver first?
2. Can I install the O/S on a disk drive hooked up to Sata port #5=
Thank you for any help.

1 Yes, or load with F6 during install
2 Yes.
The promise T3 has it own BIOS, you should see it when the controller is turned on as a separate boot page.

Imac failing to see any wifi network

I have an Imac which is just over 6 months old (purchased December 2011) running LION, it has been connected to our wifi network since we set it up and there have been no problems, the mac has also been able to see other wifi nextworks available in our area.
A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all.
I have rebooted the machine and the router etc to no avail and all other Macs, phones and ipdas etc are able to see and use the wifi network successfully?
Has anyone had this problem? is there anything more I can do before I box it up and take it into the Mac Store to see an expert?
I assume its a hardware failure?
PS I have connected the mac with an ethernet cable and that works fine, its just not able to see any wifi networks.
Regards
Dave

Hi!
I bought my imac 21,5 before 2 months after all lies from people dont understanding computers.
Yes, I have exact same problem. I am using safari then suddenly the wifi is off. And it scans for wifi networks but it cant find any networks. I am using my old pc now and writing this post. If I restart the imac the wifi gets normal and i can see my network and other networks.
I have applecare too, 3 years. But i dont know what to do. If you ask apple they will told you "the problem is unusual, or they will told you its not usual that people get problem with mac. If you ask mac users, they will told you "you never get problem with mac" BUT THEY ALL LYING!
(i have other problems too with my imac. sometimes when the screen enter sleep mode I cant turn it on with the magic mouse or keyboard. I can only turn it on with screen-powerbutton then after maybe 10 sec the login-screen turns black. then I start the screen again with screen-powerbutton the screen turns black again.etc.)
Of course it is hardware issue (I am expert user of pc) but the problem is Apple dont want to belive that a mac can get problem. And people using mac are afraid of the word virus or computer problem therefore they buy from Apple.

Can't see any device after i attempt an upgrade and device useless til i reset on another pc.... Help!

Everytime I try to do an upgrade via my PC it freezes the phone (screen set on pic of usb requesting to plug into itunes) and itunes fails to recognise device. This has happened with my iphone 3s, my ipad, my ipod shuffle, and now with my brand new - never used iphone 4s.
It will only rework if I completely restore on a different PC. Have uninstalled / reinstalled itunes and tried all the suggestions. Figure it has ato do with the PC as this has happened to multiple devices now. Very very frustrating as I don't have a second PC and is a massive inconvenience. Does anygone have any suggestions? I want to use my new phone!!!!

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)
Check that you have correctly followed the instructions for your model of Apple TV.
If not already, try using a powered USB port.
Repeat the process but this time try connecting the cable while iTunes is closed.
Repeat the process with another cable.

ITunes incredibly slow to load, cannot see any devices...

Hello,
iTunes is incredibly slow - takes 2 minutes+ to load. When it does load, it cannot see iPod touch, iPad 3 or iPhone 5. It could yesterday.
Updated iTunes.
Totally removed all iTunes and associated programs, and reinstalled.
Checked Apple USB drivers, all functioning.
Deleted preferences file.
Ran on Windows safe mode.
Ran 3 different malware scans in Safe Mode.
Unistalled Quicktime.
Ran on basic boot under MSIconfig.
Please help!
Windows 7, i5, 6gb ram.

Yes, that's a good point. On my MBP, everything works just fine, so it's not an internet connectivity issue. Both machines are running the same anti-virus/firewall software with the same settings. The MBP is wireless via Time Capsule, whereas the iMac is hardwired to TC. The only difference is the entire library is on the iMac and AppleTV pulls from it for both audio & photos.
But these are all "library" issues, which are unaffected. It's only the "store" and the rendering of the pages within it. I tried the parental settings trick to disable iTunes Store & iTunes U - sped right up on display. But as soon as I changed settings so I could actually access content? Slowed right down...
Any other thoughts??
Thanks

I moved my itunes now it does not see any devices

I just transfer my I tunes from my I mac to an Apple mini. Everything transferred fine EXCEPT now Itunes does not recognize my two Ipads or my I phone
If this question has been asked or answer I am sorry
Help

Dan321144 wrote:
I just transfer my I tunes from my I mac to an Apple mini.
how exactly did you do that ? what did you transfer ?
JGG

ITunes doesn't see any of my devices.

I have just got the iPhone 5S, but my itunes wont see any devices. I can see it on my device list in windows. I have stoped and restarted the apple device service thing but this didnt help. I have also reinstalled iTunes.
Im running window 8.1 RT

Hi, Damski2310.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

HT4759 I have problem in Bluetooth ,he didn't connected by any device and didn't see it

I have problem in my Bluetooth mobile it didn't see any device and didn't connected with us

Hi there Ahmedzoz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Griff W.

11.3 upgrade locks up with any device I try.

This upgrade will not display any device other then my Iphone 4s. I have gone through all the trouble shooting procedures. If i connect my phone the whole thing locks up. This upgrade *****. I have installed and re-installed several time. I have completely removed the program several times. I can see any device in windows that is connected.

Hey Diablo6vct,
Thanks for using Apple Support Communities.
So iTunes does not display all devices connected and it freezes sometimes. This first article has a lot of things you can do for iTunes freezing and the second article should help with the devices being not recognized.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Have a nice day,
Mario

Desktop Manager Doesn't See Any Address Book Contacts or Groups

Hi,
The title says it all.
Version 1.02 or 1.03 fo DM fails to see any contacts on my computer.
No errors.

I hate to respond to my own thread.
Has anyone else seen this??
I have two machines, a Mac Mini and a MB Pro, both running 10.6.3 and DM fails to see any contacts in my address book to sync.
I get no errors.

How can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

how can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

Follow the instructions in this article. You can turn off the auto-renewal on either your i-device or via iTunes on your computer:
Manage your auto-renewing subscriptions - Apple Support
Cheers,
GB

HT1296 I cannot see any of my devices in Itunes (Windows 8.1 and Itunes 11.1.4)

I am unable to see any of my devices (Iphone 3GS, Iphone 4, Iphone 4S and Iphone 5) in Itunes. All appear fine in windows and can be browsed via windows explorer. I have restarted AMDS and checked all the drivers? Have windows updates or Itunes updates cause a compatibility issue at all?

Hello wasp2014,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Best of luck,
Mario

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

Meas&Auto Explorer Fails to see any Devices

Similar Messages

Maybe you are looking for