Measure Add-in won't install in Excel 2010

I've used Measure 2.0 on other computers successfully, including one running Excel 2007 with the VBA converter pack. However, I cannot seem to add it to Excel 2010. It is listed and selected in the Active Add in list, however it does not show up in the Add-ins menu with my other add-ins. Any suggestions?
thanks

Hi Jessica,
I am sorry to tell you that unfortunately, the Measure product reached it's End of Life date back in 2009, prior to Excel 2010. Please see the product page here:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/1450
Regards,
Nathan S.
Applications Engineer
National Instruments

Similar Messages

Excel Add-in won't install

Hello,
I'm a real newbie, so please forgive the silly question.
I have Excel 2003 and I can connect to an Oracle 9.2 database. I tried installing the Excel add-in but I do not see it listed on the menu bar. However, I do see it listed in the Add-in list.
As I understand the install instructions, I didn't see any other requirements to get this running.
Any help would be appreciated.
Thank you.

Do you get an error when installing the Add-In?
Even if Excel does not appear in the taskbar, it may still be running as a process. Be sure to launch your task manager and kill any excel.exe processes.
Try doing a complete uninstall of the Add-In and re-install.
Else open a ticket with Metalink.
Thanks
Abhinav

The Mountain Lion Won't Install On My 2010 MacBook Pro

After I downloaded the Mountain Lion; it won't install because it says my hard drive is on a back up drive for the time machine. I've never used Time Machine and I only have one hard drive. I wasn't able to locate a backup file for time machine. Any suggestions on how to resolve this?

OS X- Cannot install on a volume used by Time Machine for backups

BAM add-in error in 32-bit Excel 2010

Hello All
I'm trying to work with BAM excel add-in with 32-bit Excel 2010, when I try to open the excel I get the dialog box with "Automation error, Unspecified error", and hit on the OK button, it took me to the following VBA screen, and I try to debug
it to see where it fails, but it throws the same error again. Any idea what is missing or what is causing this?
I'm on Windows 7 Enterprise with BizTalk 2010.
Thanks
Bhava

Hi Bhava,
Fix for this problem is available now.
Office 2010 w SP1 - http://support.microsoft.com/kb/2597986
Steps to fix the problem manually
The manual fix for this problem is to re-register MSCOMCTL.OCX. To do this, follow these steps:
1. Open an administrative-level command prompt. The command prompt MUST be on the administrative level for this to work. Click START, and type RUN in the run command line. On Windows Vista and Windows 7 you will see CMD.EXE appear in the quick search list.
Right click CMD.EXE and left click Run As Administrator. A black command prompt opens. On Windows XP, there is no built-in run-as-admin, but you can use the run as menu option (or runas command line) to execute an admin command from a Limited User Account.
2. If on a 64-bit machine, type the following:
regsvr32.exe /u C:\Windows\SysWOW64\MSCOMCTL.OCX
Hit ENTER
then type
regsvr32.exe C:\Windows\SysWOW64\MSCOMCTL.OCX
If on a 32-bit machine, type the following:
regsvr32.exe /u C:\Windows\System32\MSCOMCTL.OCX
Hit ENTER
then type
regsvr32.exe C:\Windows\System32\MSCOMCTL.OCX
Your Excel BAM Addin should work again after doing this.
Reference:
http://biztalkconnect.blogspot.co.uk/2012/10/bam-add-in-excel-issue-unspecified.html
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/08/15/quot-unspecified-automation-error-quot-after-applying-ms12-060.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Add-ons won't install

When I click to download the Add-on Compatibility Reporter if I look in about:addons it says it is installing but this never completes. If I click to cancel it the cross doesn't respond. After restarting Firefox the addon doesn't show up in the list any more. I have tried deleting the extensions and compatibility files from the profile folder but the issue still occurs.

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

I've installed firefox 4 but some add ons won't install as they say I'm still running 3.5.6 What's going on?

I'm getting messages saying "This addon requires 4.0.* you are running 3.5.6" Help>About says I'm running 4.0.1

Either an add-on (or you) set an override for your Firefox version. To clear that:
(1) Type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type '''usera''' and pause for Firefox to filter the list.
(3) Right-click and reset any bolded lines that contain "override"
Any luck?

Mountain Lion won't install on mid-2010 iMac with Snow Leopard

Using the same Apple ID I used to purchase Mountain Lion on my Mac Pro, I signed into the Mac App Store on my iMac and downloaded Mountain Lion with no issues. The iMac is running 10.6.8.
When I launch the ML installer and accept the terms, the install screen appears but the Install button is greyed out as is the icon for my hard disk, Macintosh HD. Below the OS X Mountain Lion banner it says "OS X cannot be installed on "Macintosh HD".
Snow Leopard was installed on this machine as part of a family pack and I still have the DVD. Nothing shady going on license-wise, is I guess what I'm saying here.
Anyway, no reason is given and no options are offered other than the Back button at that point. And I can't seem to come up with anyone having a similar issue in all my "research". So any help or insight would be appreciated.
Thanks,
Doug

I recommend backing up your system, and before going into the install, checking disk utility > verify disk > macintosh hd partition > to make sure the partition is okay.
If there is anything wrong with it, you will know here. Sounds like the disk may be locked or there is an issue w/the partition "macintosh hd"
also, maybe the partition was created incorrectly... check to see if the partion is MAC OS EXTENDED JOURNALED and not case-sensetive

Excel 2010 - Multiple Digital Signatures?

How would you add multiple digital signatures to an Excel 2010 workbook?

Hi,
To add multiple digital signatures, we need to create the signatures first.
Then please refer to the following steps:
Click the File tab.
Click Info.
Under Permissions, click Protect Document,
Protect Workbook or Protect Presentation.
Click Add a Digital Signature.
Read the Word, Excel, or PowerPoint message, and then click OK.
In the Sign dialog box, in the Purpose for signing this document box, type the purpose.
Click Sign.
Check the following MS link for additional information.
http://office.microsoft.com/en-us/excel-help/add-or-remove-a-digital-signature-in-office-files-HA010354308.aspx
Regards,
George Zhao
TechNet Community Support

Mountain lion will not install on late 2010 Mac pro

Mountain lion won't install on late 2010 Mac pro 8 core. After downloading mountain lion I ran the installation software but it gives me the error mountain lion failed to load and doesn't restart the computer.

Welcome to Apple Communities
Open Finder, select Applications, delete the installer, open App Store > Purchases and download OS X

Power Map Available for Excel 2010?

Hi,
I would like to download Power Map for Excel 2010. Does Microsoft have an add-in for Power Map for Excel 2010? I've been searching but have only come across an add-in for Excel 2013.
Thank you.
Stuart

Nope. It is for Excel 2013 only (Office 365).

"Add-On Software" CD for LV6.1 won't install.

Following NI Forums Knight Dan Knutson's advice to install a LV version earlier than 8.5 in order to convert 40 VIs written in LV5.1 to LV8.5.1, I attempted to install LabVIEW 6.1. There is a CD that won't install. It is the "Add-On Software" LV6.1 CD. The CD does not autoinstall when it's put in the CD drive. When I right-click the Autorun > Install icon, the installer returns, "Error. Installation failed." The CD has LabVIEW, and Measurement Studio folders, an autorun setup information file and and Eagle icon. There is no setup.exe on the installation CD main directory. Could anyone please suggest how to install the LabVIEW and Measurement Studio folders?
I tried to go into the individual sub-folders of the "Add-On Software" CD, but when I reached LabVIEW\Enterprise\SPC\Install\disk1\ and click Setup.exe, I get "Setup Installation Error. Setup has detected that UnInstallShield is in use. Please close UnInstallShield and restart Setup. Error 432." Running MSCONFIG to remove isUninst.exe from the Startup folder fails because no IsUninst.exe application runs on startup, rebooting does not help, it's not an Administrator issue because my account already has Administrator privileges, and searching the Internet does not give useful clues.
Could an expert please solve either of these two problems?
Thanks,
BenCh01

Hello All,
I may be confused on the topic of a Compact RIO integrated with LabVIEW version 5.1? Version 5.1 pre-dates the release of Compact RIO hardware. The Compact RIO platform uses neither NI-DAQmx, nor the Traditional NI-DAQ driver, it is built on a separate driver platform in NI-RIO. May I inquire as to why version 8.5.1 was selected for the upgrade process, and not the latest version in 2009 SP1?
As you may have experienced already, the process of upgrading across 10 releases of the LabVIEW development environment may present issues, as the environment has been significantly changed through the years. For additional information on the upgrade process please see the following information:
How to Upgrade or Revert a VI to a Different Version of LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/8387
Upgrading to the Latest Version of LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/7417
More realistically, does this application contain highly customized code, or functions, that are not integrated into the newer platform? With regard to hardware integration, if you intend on working with the Compact RIO platform, you will be working to develop brand new code using the LabVIEW Real-Time (and possibly LabVIEW FPGA) Module, as any code written in LabVIEW 5.1 will not support the Compact RIO platform. With respect to any additional hardware that may have been used, you will need to verify the device support in either the NI-DAQmx or Traditional DAQ releases, this information can be found at http://www.ni.com/support. I believe time spent developing on a supported platform, for the new hardware set, may be more effective than looking to directly upgrade the 5.1 code.
Please post any additional questions you may have.
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Not able to install Essabse Excel Add in

Hi
I've installed and configured the Hyperion 11.1.2.1 on my Server Window 208 Rs 64 bit server. The Essbase Excel add in was not installed. So am trying to install ti manually. But am not able to do that. Am getting an error saying that the path that is given is not correct. Please help me out of this
Thanks in advance

You say that you are not able to install the add-in and you get an issue in installing the Excel Add-in. Do you get the error mentioned when you try to install it?
Once the Excel add-in is installed you need to register it. Hence Register the Spreadsheet Add-in.
If you are getting error while opening Excel try the following --
1. Close Excel
2. Unregister Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Unregister Spreadsheet Add-in.
3. Register Spreadsheet Add-in, select Start, then Programs, then Oracle EPM System, then Essbase, then Essbase Client, and then Register Spreadsheet Add-in.
4. Launch Excel and then check.
Regards,
HyperEPM

Installing Essbase Excel Add-in on 11.1.2 and Excel 2007

Hi All,
Just wondering if anyone has had any success installing the excel add-in (essexcln.xll) on Office 2007 and 11.1.2? I've been trying over the weekend, so that I can start using the vba api with essbase and I'm having no luck. I've tried the essexcln.xll at (installed drive)\oracle\Middleware\EPMSystem11R1\products\essbase\bin and I'm getting a "file is in a different format than specified by the file extension" message box, and a whole spreadsheet of random characters.
I've also tried installing the add-in through the patch created for 11.1.1.3. The add-in works, but if I try to use the API to open an outline, I get an "outline too new" error.
Anyone have any hints?
Thanks in advance,
Nathan

Hi John,
Thanks for the help. So I've tried installing the add-in both on Windows Server 2003 and Windows Server 2008, and I'm still getting the "The file you are trying to open, 'essexcln.xll', is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?" message box. I've tried running excel as an administrator, then adding the add-in through excel's add-in menu.
When I open the file, the first line of the sheet says: This program cannot be run in dos mode.
Also, both servers are 64-bit. I'm unsure if this could affect the add-in working.
Thanks in advance,
Nathan

Unable to find/install Essbase Excel Add-in

Hello,
When I installed Essbase on this computer, for some reason we did not have MS Office installed and so the Add-in was not installed automatically.
Now, I cannot find the essexeln.xll file in the bin director and Excel does not show it as an Add-in. The Excel version I am using is 9.0.3821 SR-1.
How do I install this add-in on my computer? Thanks.
-- Adi

Installing the Essbase Excel add-in is pretty harmless, and I assume this is on a PC not a server correct?
If this is 9.3.1 and if it's on a PC just run the setup.exe for the "Hyperion Essbase Release 931 Client Windows Installer" - do you still have that downloaded??
It should fit on a flash drive if you just want to take it over to the PC in question and run the setup.exe. There's the .exe, a .jar and a .inf file that comes with the install.
Be sure you're logged on as an Admin on the PC before you install, that's easiest.
Once you install do a reboot just for fun (probably not required but given the history of your install) then go back to your Start | Programs menu and run that register add-in item from above.
Good luck, hope this helps,
Karen

I installed Lion, now in quickbooks when I try to Export to Excel, it says I need to install Microsoft Excel version 10.1.0 -- Why won't it go to Numbers spreadsheet?

I installed Lion, now in quickbooks when I try to Export to Excel, it says I need to install Microsoft Excel version 10.1.0 -- Why won't it go to Numbers spreadsheet?

Oops ... make that 15.0.1 sry

Measure Add-in won't install in Excel 2010

Similar Messages

Maybe you are looking for