Measurement instruments interface with QM SAP

Hello,
We have a plan to procure measuring instruments to measure length,Width,Diameter etc for doing the quality check.
We want it to be interfaced with SAP.
Does anyone have list of manufcaturer's whose measuring instruments fulfills the above requirement and can be interfaced with SAP.
Thanks and regards

Hello Shahnawaz Mohd,
You can try the standard QM-IDI functions that are prepared to be used to link SAP with external equipments or LIMS.
See the link bellow, if you have any problem using this functions tell me so I can send you some examples. See the link bellow for more information.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/26/b43a0b506511d182c20000e829fbfe/frameset.htm
Best regards,
Tiago Magalhães

Similar Messages

How to create a interface with NTR from SAP XI?

How to create a interface with NTR from SAP XI?

Hi,
What do you mean by NTR ?...
What are the details you needed...Please be clear and more elaborative as far as possible..so that you will get straight forward answers...
HTH
Rajesh

No mapping property with name sap.bc.bmt.wfm.xi.interface.synch

Hi All,
I configured Sync/Async BPM scenario, but message is failing at "Call Adapteru201D while calling BPM.
Below is the PI trace :
<Trace level="1" type="B" name="SA_COMM">
<Trace level="1" type="T">Start Sync/Async Communication</Trace>
<Trace level="1" type="Timestamp">2009-11-10T17:57:36Z CET Starting Processing</Trace>
<Trace level="1" type="T">Pipeline Timeout: 10.11.2009 18:58:37 CET</Trace>
<Trace level="3" type="T">Calling BPE Adapter</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">Processing mode is</Trace>
<Trace level="1" type="T">No mapping property with name sap.bc.bmt.wfm.xi.interface.synch.http://***/OrdereateRequestConfirmation_Out</Trace>
<Trace level="1" type="T">OrdereateRequestConfirmation_Out really used in process?</Trace>
</Trace>
And the error message that I am getting is :
<SAP:AdditionalText />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
BPM start receive step has below properties:
Mode :Sync/async Bridge
Synchronous Interface: Synchronous interface of abstract type.
Message: Asynchronous abstract message, which had the same request message as out bound synchronous interface.
Additionally I checked BPM cache , which is fine with out error.
Please suggest.
Regards,
Venkat Tirumalasetti

Goutam,
MI_RecipeDownload_Abstract is my first recv step in BPM
It is also the recv interface for RFC sneder
>> for rec interface for RFC sender it should be with out abstract. only steps inside BPM must be abstract.
Regards
Sreeram.G.Reddy

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

CAPA System (CATSWEB) Interface with SAP

Hi Experts
Anybody worked on SAP interface with CATSWEB software (for CAPA system)?
Please guide me to do the same.
Thanks in advance.
Regards
Bala

Hi JJ,
I may be just re-iterating what has already been said, but for clarity I will put down the points again, since I was also faced with the same confusion regarding how barcode and sap will work.
1. Barcode Scanner has nothing to do with SAP or any software.
   In simple terms, it is just like a keyboard. To demo;
    a) Plug in the barcode scanner in the USB port
    b) Open Notepad in windows
    c) The cursor will be inside the notepad
    d) Now scan the bar code against any barcode image.
          (Suppose the barcode image contains the information XYZABC)
   e) As soon as you scan, the characters   X Y Z A B C (without spaces)
      will AUTOMATICALLY GET TYPED on the screen, inside the notepad, at the place of cursor.
    Hence, the SCANNER just acts as a KEYBOARD.
   and autommatically types in the characters WHEREVER the CURSOR is.
   We can test this using notepad, Excel, word or any where the cursor can appear.
   We can test in any standard sap screen on any text field also, etc.
2. Saving the data in SAP.
    a) First we have to figure out how to save data in SAP,
        considering we are entering data MANUALLY.
   b) This can be a STANDARD Transaction or a Z transaction.
   c) Suppose the field / information is material number,
     then instead of TYPING the material number on the screen, in the field,
    we simply place the cursor on that field.
d) then we simply scan the image (containing information on material n umber) and hooooooray,
    it gets automatically TYPED IN on that field.
    Thats it. Other fields we may have to enter manually and press the SAVE button to save the data.
Scanner just saves TYPING the information manually, and hence reduces time and error both.
Hope this helps.
Regards,
Amit Mittal.

How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Dcs interface with sap pm

Dear experts,
can anyone explain me the basic steps and information regarding dcs interface with sap .
i want to do this sap implementation for the thermal power station. i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
how the important parameters from the dcs is linked with sap server. how i can get the data from dcs and pass it to the sap system.
can anyone give the helping hand.

Hi,
You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
Thanks
Swarup

Peoplesoft HCM Interface with SAP?

We planned to implement the SAP HR module, together with the SAP EAM, SAP SCM and SAP FI in a project that was supposed to Go-Live last year.
The HR Dept was using Peoplesoft HCM previously.
The project never went live and the project has now decided to implement SAP EAM, SCM and FI but retain Peoplesoft HCM in HR.
On which modules in SAP would Peoplesoft HCM normally interface?
Thanks in advance.

Hi lina.
chk these links
http://www.oracle.com/applications/peoplesoft/hcm/ent/PeopleSoft%20or%20SAP_%20Choosing%20The%20Best%20HCM%20Suite.pdf
http://www.oracle.com/applications/peoplesoft/hcm/ent/Weighing%20Your%20Options%20For%20HCM%20Executive%20Summary.pdf
for hcm implementation u should interface with
BNA (business needs analysis);
BPR (business process review);
GAP analysis (identify essential customizations and work arounds);
Gathering and reworking client data for input into the system;
Training of Super Users (sometimes end users also);
JAD workshops with super users;
Functional specs for customizations and reports;
Setup of system;
Testing system, any changes, customizations and reports;
Creation of CRP (conference room pilot) to demonstrate system to client;
HR project documentation;
Responsible for sign off of HR documentation by client;
Writing training manuals;
Responsible for delivery of a working system to client requirements;
Initial support after go live.
thanks
karthik
reward me ifusefull

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

SAP Certification for *ABAP System Interfaces with SAP NetWeaver    7.0*

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver    7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator>
Points Assured.
Regards
Praneeth
Edited by: Jan Stallkamp on Oct 13, 2008 3:30 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

SAP Certification for   ABAP System Interfaces with SAP NetWeaver

Hi Experts,
I am appearing for SAP Certification in the stream of *ABAP
System Interfaces with SAP NetWeaver    7.0*
so as per the syllabus i required the following material,
BC420,BC425, BC427,BC415,BC417,BIT300,BIT350
BC401,BC402,BC400, BC430,BC490,ADM325,BC425,NET900,
NW001,TESA20,TZCAFG,SM001
so if any body is having the softcopy or any related links of the
above mentioned material
please send to my following mail ID's.
<removed by moderator> at yahoo dot co in
Points Assured.
Regards
Praneeth
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Oct 14, 2008 1:25 PM

Don't ask for copyrighted material!
Don't publish your e-mail address!
Don't assure points!
=> this thread will be locked.
Please read the rules of engagement otherwise you will set your account on risk of being deleted.
Best regards,
Jan Stallkamp

SAP Certfied Dev Professional - ABAP System Interfaces with SAP Netweaver 7

Hi all,
Has any one here done this certification ?
SAP Certfied Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0
Code - P_ABAP_SI_70
If yes, how has been the value add for you post this certification ?
Regards,
Nikhil.

Hi Nikhil,
I have not appeared for it but am sure that SAP's professional certification has very much value in the market. The professional level exam not only captures your knowledge but it shows the practical experience as well.
Regards,
Subhash

SAP certified professional - ABAP system interfaces with SAP netweaver 7.0

Hi,
I have one and half years experience in ABAP. I want to do "SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP NETWEAVER 7.0".
I am currently in U.S and would like to do the certification here. Whom do I need to contact and what are the documents I need to furnish. Please throw some light on the process.
Thanks,
Poonam.

Dear Poonam,
the "Professional"-Certification is very very hard - during my last Certifcation Exam, all candidates with the Pro-Exam failed (I was so glad I chose the normal certification...)
Here's how to book your exam:
Go to [http://www.sap.com/services/education/certification/index.epx|http://www.sap.com/services/education/certification/index.epx] and follow the instructions ("visit the local SAP Education Web site for the country").
Figure out the exam code for your certification. Example: For the US, there is a downloadable list (PDF) of exams available, called "list of the available certification exams".
Schedule the exam according to the rules of your region - here is the link for the US:
[http://www.sap.com/usa/services/education/certification/exam.epx|http://www.sap.com/usa/services/education/certification/exam.epx]
Regards,
Klaus

SAP CERTIFIED DEVELOPMENT PROFESSIONAL - ABAP SYSTEM INTERFACES WITH SAP

Hello Experts
I am Atush Rohan, I have done my "SAP Certified Development Associate - ABAP with SAP NetWeaver 7.0" on 3rd April 2009.
I want to appear for "SAP Certified Development Professional - ABAP System Interfaces with SAP NetWeaver 7.0". I have about 3 and half years or experience in SAP ABAP. And I plan to give this certificate exam in the coming 6 months.
Could you please tell me how i apply for this exam, and whether SAP provides the certificate material for the exam "P_ABAP_SI_70". Waiting for a positive reply.
Regards
Atush Rohan
Edited by: Atush Rohan on Jul 30, 2009 1:21 PM

hi,
actually you can find your sid on your certificate itself ... your sid will start with SXX .. ok now along with this you will receive an envelope in which there would be an letter where detalis regarding your sid and password for login access in sap market place will be stated... so you can login with that in server market place.... usually you get this along with the certificate and is being provided by the centres authority... now if you have not received it so you need to contact your centre and tell them to give it to you... if they dont barged then you can ask them for the concern guy's email .... this guy is the one who receives all the documents relating with your certificate .. now this guy is someone from sap labs banglore ... also if you have not received your id card so you can mail him or tell your centre authority in that case now usually the centre guys take the matters lightly ...
ok and as far as your certification exams goes i did search the pearson website they really dont have that professional certification for the abap guys but they do have one for functionals and some other....
ok now you need to approach yout nearest certification centre in that case and simply ask them that you need to appear for level 2 certification also you can contact the sap labs banglore in that case but i know that they are not responding .....
so in that matter you tell your centre that you need to schedule the certification they will charge you the certification amount and then will schedule the date..... yes they can do that.
hope this will surely help you!!!
thanks & regards,
Punit Raval.

Solution Manager Interface with Tools Outside SAP

Does anyone have information on Solution Manager's abilities to interface with tools outside of SAP? I am interested in interfacing Solution Manager with legacy systems and main frame systems (e.g. Informatica). I am especially concerned with Root Cause Analysis, Exception Analysis, and Error Reporting in Solution Manager regarding non-SAP systems. Also, if Solution Manager is able to interface with these systems, can it access details from outside SAP (e.g. data from legacy systems)?

Hi,
The solution manager can be interface with the ARIS.We did in our project this interface.
The Business process flow was defined in ARIS & synchronize with the solman & once configuration is done then we reverse synchronize the same to update the ARIS,so you can interface with legacy also.
Regards,
Raj.

Measurement instruments interface with QM SAP

Similar Messages

Maybe you are looking for