Measurement of SAP usage / adoption

Hi,
Would anybody out there have any material (documents, whitepapers etc. ) pertinent to the measurement of SAP usage / measurement of SAP adoption by users? For eg. if a company has been using SAP for a couple of years now, is there any literature on how a consultant might go about looking at the usage of SAP by end users, measuring the same and reporting on it?
I don't know if this is the right section in the forum to be posting this query but I would be most grateful for any kind of inputs.
Regards,
Sri

You can check the Early Watch reports for information about it.
Regards
Juan

Similar Messages

  • Measurement methods and usages

    Hi ,
        What is Measurement methods and degrees of completion and what is the relation ship between these measurement methods and usages.
    Regards,
    Athidi.

    Hi,
       Measurement methods to be used for determining a percentage of completion.
    A measurement method is made up of a measurement technique that is predefined in the SAP System, and additional parameters, such as a starting percentage of completion.For the measurement method start-finish rule, the following measurement methods are specified:
    u2022     Method 0-100 with a start percentage of completion of 0.
    u2022     Method 20-80 with a start percentage of completion of 20.
    gothrough the lnks hope it will help u out.
    /message/5782064#5782064 [original link is broken]
    /message/8706970#8706970 [original link is broken].
    Regards

  • HOW TO CREATE UNIT OF MEASURMENT IN SAP

    HI ALL,
    PLEASE HELP HOW TO CREATE UNIT OF MEASURMENT  IN SAP NM/S
    GIVE ME THE SCREEN SHOT OR STEPS IMM.
    THANKS
    HAPPY

    HI,
    please check the below link for creation of UOM.
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/create-unit-of-measure-1339786
    transaction code to create uom is CUNI and you should have an ISO code for that.
    Regards,

  • Measure Java CPU usage

    Hi,
    I'm not sure whether this is the right forum to post this message.
    I have a java application and basically it takes lots of CPU time and memory. What my concern right now is the CPU usage. Basically I reduced the number of CPUs from 8 to 4 (Solaris v1280 box) and the CPU usage got increased from 30% to 90% :(
    My requirement: Is there anyway that I can measure the CPU usage using Java code itself, so that I can insert those "set of APIs" (for measuring CPU usage), between APIs to collect the CPU usage data?
    Thanks,
    Siva

    The comparison would be unfair (by your definition of unfair) in Java, too, since the JVMs for both platforms are different.
    If you are dealing with time, though, 500 milliseconds is 500 milliseconds, no matter what language you write it on or what platform you run it on. If you use VC++ for the Windows stuff, make sure you disable Microsoft extensions so you have some ANSI standard code that will compile with gcc.
    Since you are trying to compare operating systems, make sure both machines are using the same processors (and motherboards with the same PCI bus architecture), too. And have the same amount of memory, which is the same speed and architecture on both. Their hard drives should be roughly the same speed, too. The PCI bus usage could vary with network cards, so having the same network cards will be a plus. What it seems to come down to is that you are going to end up measuring the performance of the socket library implementations on both machines.
    As far as JNI goes, all it is is a way to write native code and use it in your Java application. I don't know much about it, search around for some examples. There's a tutorial, somewhere, too. Some dude on here, tpritchet, seems to know a lot about it.
    Jason

  • Multiple Unit of Measure in SAP BO

    We have a requirement to use multiple unit of measures from one of our client whose business concern is manufacturing and tenneries.
    We want to measure inventory in units and in meters at same time. For example, if one new unit measuring 50 metres is received in warehouse then it should be measured in units as well as in metres. If the last quantity in warehouse was 50 pcs with 600 metres then after the one unit addition it should update the inventory to 51 pcs with 650 metres.
    Is there a solution or way we can use SAP BO with multiple UOM.

    Hi,
    In B1 8.8, you can use multiple unit of measure but it will be displayed in the sales marketing document and purchase document.
    The stock UOM can't be managed by multiple UOM.
    When you see field UOM in the item master data --> inventory tab, you can only enter one UOM there.
    In the document level, you can maintain multiple UOM for the item or inventory. If you have defined the conversion of the UOM, it will be automatically calculated.
    Rgds,
    JImM

  • MEASUREMENTS IN ACTIVITY USAGE PROFILE

    Please see enclosed link 'printscreen', how is it possible to see, in the Activity Usage Profile, the measurements (hours or manpower,etc.) in the chart blocks,
    specific per month?
    And P6 does not show the actual hours + curve (actual progress till January 2011)
    Thanks in advance for your response, regards,
    WP
    Edited by: WP Hertel on 18-jan-2011 12:09
    Edited by: WP Hertel on 31-jan-2011 15:27

    Modify your timescale to Month.
    1. Right-click on the graph and select the Activity Usage Profile Options.
    2. Click on the Graph Tab
    3. Select the checkbox 'Calculate Average'
    4. Select the 'hours' per month by typing them in (this won't work in P6 7.0 with no service pack). 173 hours is the default and this will convert the Axis to 'bodies'.
    If you want to see exact numbers, double-click in the graph and a popup window will appear.
    Regards,
    Steve Clements

  • How to measure true CPU usage?

    Hello,
    I have a program that runs on a Windows XP 32 bits machine with JRE 6u16 (8 [email protected], 16gig ram). This program gets 100,000 messages per minute, does something with it and republishes the data.
    We recently moved the same program to a Linux box, same spec, 64 bits however.
    When running Visual VM via JMX on both in //, we can notice huge CPU utilization on the Linux box, vs. the Windows one.
    I expected the Linux version to kick arse.
    My question is, how to effectively measure raw performance on a multiple-CPU machine, Windows and Linux?
    Also, how does the CPU graph works in jConsole or VisualVM? Average of all CPUs?
    Thx v much

    Take a look at this.
    http://articles.techrepublic.com.com/5100-10878_11-6067049.html

  • How can I measure my daily usage of my macbook

    Hey,
    I would like to know how many hours I use my macbook on a daily basis. Is there any application which just starts a timer as soon as the mac boots and then provides an overview of the total time, average usage time per day etc.?
    Thanks for your help,
    Voxius

    It is a small "but" to the suggestion from Adnan Z. If the code you want to test execute fast. You must put it in a for loop a execute it say 1000 or 10000 times. This because the timer tick resolution is 1 msec at the best. Windows is not a real time system, so you may also have some jitter in the Tick Count output
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Send system measurement to SAP

    I can't send system measurement from system XY in transaction USMM, because the RFC connection SDCC_OSS doesn't work.
    I want to know if I only via SOLUTION MANAGER can send this measurement or I have to change the RFC connection on the system XY?
    Thank you for helping me,
    Mirko

    >
    Mirko Ljubi wrote:
    > I can't send system measurement from system XY in transaction USMM, because the RFC connection SDCC_OSS doesn't work.
    > I want to know if I only via SOLUTION MANAGER can send this measurement or I have to change the RFC connection on the system XY?
    Fix the RFC connection SDCC_OSS in your system XY.
    - Ensure, that SAPOSS is functional.
    - Recreate SDCC_OSS via SDCCN (Goto -> Settings -> Task-specific, RFC destinations, Settings, Switch to change mode and choose icon "Create destination to SAPNet R/3 Frontend")
    You can still send system measurement data without Solution Manager
    Best regards,
    Ruediger

  • How to measure the sap system performance

    hi experts ,
    i want to understand how the system performance is calculated in sap. for example " How system , database performances are calculated by sap in SE30, SCI - sap code inspector " ...
    With regards ,
    James..
    Valuable answers will be rewarded...

    Hi James,
    Check these links, they will help you
    http://help.sap.com/saphelp_nw04s/helpdata/en/8a/3b834014d26f1de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801f7c454211d189710000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d1/801f7c454211d189710000e8322d00/frameset.htm
    Thanks
    Janani
    award points if helpful

  • How can I measure GPU load/usage?

    I have a GPU bound application I want to write a watchdog for.  To do this, I need to monitor the GPU usage.   Is there a way to do this in PowerShell (WMI, Win32, etc.)?   I am running Windows 8.1 with an AMD graphics card.
    MSDN premium subscriber

    Hi,
    Just checking in to see if the suggestion was helpful. Please let us know if you would like further assistance.
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    Regards, Yan Li

  • Measuring total bandwidth usage

    Does anyone know if there is a way to measure the total amount of data uploaded and downloaded through the Airport Extreme? With the upcoming Comcast limit of 250GBs, I want to try and get an accurate measurement of the bandwidth used by my "local" network which includes my PM G5, a Mac Mini and a MacBook Pro. I found individual apps (like SurplusMeter) that will measure the bandwidth used by each computer. I was just hoping to find a tool that would measure what goes "through" the wireless access point.
    Thanks

    That looks like a possibility, but when I looked at the cacti site, everything was over my head. I am neither a programmer nor do I know anything about SNMP MIB data.
    Something else that occurred to me, however, was that I am only using my Airport as a wireless hub. I have a Vonage [Motorola VT2442] router hooked up and configured as the router for my local network. On the router web page is a 'Network Statistics' page that may have what I want. Is anyone familiar with that router model? I noticed that when I restarted it through the built-in web page, the 'Network Statistics' went back to zero. Can I assume that if I simply add up the "Total Bytes" both transmitted and received for BOTH the interfaces (Ethernet & WAN), divide by 1,000,000, I will end up with the total amount of data in megabytes processed over my Comcast connection? (That is, since the router was rebooted).
    Thoughts?

  • Is there aproblem with the settings app measuring cell data usage incorrectly?

    My Settings app in my iPad (3rd gen) under General>Usage>Cellular Usage is telling me I have used 10.2 TB received and 713 GB sent. The Cellular Network Data>Usage had been only 240MB in received data just two days before. I had not used the iPad in two days. It was sleeping and not shut off. My battery level also had only changed a few percent. My Verizon account is still showing the correct 240 MB received. Is it possible for the iPad to continuously access cellular data while asleep? Could this be a problem with the Settings app? Could this be from location services? I had the Map open, but it had been closed. It was still showing in the background apps witht a double touch of the start button.

    Thanks SergZak. My iPad has only been active for about two weeks. I don't see how it could have accumulated such an astronomically high number. I found one other thread from April that showed the same problem with  a number of other users (New iPad shows incorrect cellular data usage statistics?). I am hoping that Apple is aware of this and working on a correction. Although upon checking my Verizon account the numbers were accurate to true usage, I am concerned that incorrect accumulation of statistics could lead to overcharges. If I had actually used 10 TB (10,000 GB) of data at $10 per GB over my allotmet of 2 GB, I would have owed Verizon $98,000.

  • Restrict user access to sales order

    Hi all...
    We have the following situation:
    A user xxxxx creates a sales order with va01 ... how can be limited the access to this sales order??..another user  yyyyyy is not allowed to modify this sales order but user yyyyyy can create orders/modiffy ordes with va01/va02.(something like limit access to o sales order created by another user).
    Regards,

    Hello Viadi,
    Your basis person can help you out in providing this restrictions.
    I would like to tell you that you can restrict a particular user from accessing a t-code entirely for eg: you can restrict a user to only VA01 & VA03 i.e., creation and display  and another user should be given access to VA02 i.e, change SO.
    This way you can maintain security measures for SAP usage.
    If you give authorization for creation and change there might not be sanctity of usage. But this again depends upon the client requirement.
    Hope this helps.
    SAP gurus any additions or corrections to this are welcome.
    Thanks
    Swami

  • SAP Report to find usage/transactions access per module

    Hi,
    Is there any report/tool avialable in SAP to see how many transactions are being executed in a given period of time per MODULE.
    Actually management wants to see the details and asked me to provide the summarized report...(i believe they want to see the SAP usage in the company)
    Any help is highly appreciated in this regard.

    Hello,
    I never see something like that in SAP, the only way is to use the STAT transaction but there is a too low history.
    If you find something, please, let me know.
    Fred
    PS: I have create my own function to trace all the specific program.

Maybe you are looking for