Measurement points list not downloaded in MAM 2.5

Hi,
We have recently upgraded our MI server from SP13 to SP14, in which we use MAM 2.5 SR2. After that, we re-generated all SyncBOs and started replication for the timed-2 way ones. We also re-installed the PDA applications
All seemed to work fine, but now the measurement list points are not being downloaded to the PDAs anymore.
If we run the function MAM25_041_GETLIST on the backend, the measurement points are returned correctly. Also, when we run transaction MEREP_EX_REPLIC for the SyncBO MAM25_041, it runs with no error and returns many records (more than 50000) with action ADD and around 150 with action MODIFY.
Does anybody know what the problem might be?
Thanks,
Daniel

Hi Joy,
you can refer the Table 2 .
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix.pdf
Yes, Device pack needs to be installed in all servers which also requires reboot of servers.
Further, u need to take snapshot of existing firmwares from Device---Device Settings --device defaults to avoid changing of firmwares for other models.
regds,
aman

Similar Messages

Measuring point does not exist

Hi,
I am facing problem in pi sheet where in co54 while sending the process msg i am getting the error
"Measuring point does not exist"
"Destination YI16 COCI_MEASUREMENT_DOC_CREATE cannot process the message"
"Message is not sent to any destination"
Can any body help....
Rajsekhar

Hello
Check the link below for the info you can gather using the Container Variables.
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards
Mark

Measuring Points are Not displaying in mobile devices(SAP WM 6.1)

Hi Experts,
In mobile devices the measuring pints for work order not displaying. When we select the "record point" option for particular work order it should display the measuring points for that WO. But it displaying '0 measuring points'. As shown in screen shot below.
But in SAP Bach end Measuring Documents are defined for Work Order.
can any one explain :To display measuring points in mobile devices, need any extra configuration in back end? or
What functionality need to activate? How to enable this?
Thanks
Chigari

Hi Chigari
Measuring Points assigned as PRT's in backend application (SAP ECC) should be displayed in Agentry Work Manager 6.1 by standard, if their corresponding technical objects are assigned to either the Work Order header or one of the operations.
Please check if this requirement is fulfilled in your case.
There is no need to modify anything in the Configuration Portal (as far as I know).
The modification we have made is only regarding Measuring Points belonging to other Technical Objects (and still assigned as PRTs).
Søren Hansen

Functional Location measuring point UOM not displayed on mobile device

Dear Experts,
I am running SAP Work Manager 6.0 with Agentry Server v6.1.4.179 and SAP ECC 6.0 with SMFND 610_700 SP01 and SMERP 610_700 SP01 and Agentry Client v6.1.3.10200 on an iPhone.
When I display from the iPhone the "Valve Water Flow in m3/h" counter, the UOM is represented as "***"
The "Pump Bearing Oil Level in mm" counter UOM is displayed properly.
The Measuring Points are associated to a FLOC. A work Order with this FLOC has been transmitted to mobile device.
Thanks for your help.
Didier.
Reading Points definition in SAP:
Reading Points on iPhone:
Tags edited by: Michael Appleby

Hi Bill,
Thanks for your reply. In fact , I have the same problem with the WPF client and if I enter a reading value, I will get the following error message during the transmit. "Unit *** is not created in language EN"
WPF client display:
Transmit error:
Agentry log:
readDataObjectMeasuringPoint::begin
BAPI::begin
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
readDataObjectMeasuringPoint::SkipReading=False
User::getString::begin
User::getString::Property: transaction.point = 26
User::getString::begin
User::getString::Property: transaction.shortText =
User::getString::begin
User::getString::Property: transaction.reading = 0
User::getString::begin
User::getString::Property: transaction.UOM = ***
User::getString::begin
User::getString::Property: transaction.referenceObjectNumber = OR000004000293
User::getString::begin
User::getString::Property: transaction.prevCodeGroup =
User::getString::begin
User::getString::Property: transaction.prevCatalogType =
User::getString::begin
User::getString::Property: transaction.ValuationCode =
User::getString::begin
User::getString::Property: transaction.isCounter = False
User::getString::begin
User::getString::Property: transaction.codeTextOnly not found, returning empty s
tring
User::getString::Property: transaction.codeTextOnly =
User::getString::begin
User::getString::Property: transaction.description = Pump Bearing Temperature
User::getString::begin
User::getString::Property: transaction.skipReading = False
User::getString::begin
User::getString::Property: transaction.status not found, returning empty string
User::getString::Property: transaction.status =
User::getString::begin
User::getString::Property: transaction.IsNotRead = False
User::getString::begin
User::getString::Property: transaction.tmpReading not found, returning empty str
ing
User::getString::Property: transaction.tmpReading =
User::getString::begin
User::getString::Property: transaction.CodeGroup not found, returning empty stri
ng
User::getString::Property: transaction.CodeGroup =
User::getString::begin
User::getString::Property: transaction.code not found, returning empty string
User::getString::Property: transaction.code =
create::/SMERP/PM_DOMEASUREMENTDOC_CRT Connection ID: com.sap.mw.jco.JCO$Client@
42499d6d
create::Function /SMERP/PM_DOMEASUREMENTDOC_CRT created
setImportParameters::TIMESTAMP_FROM_MOBILE=20140701214858
setImportParameters::COMMIT_WAIT=X
setImportParameters::MOBILE_USER=MJONES
setImportParameters::USER_GUID=005056913EE61EE3B5A27E3E2BC46F0D
setImportParameters::MIDDLEWARE_CALL=X
setParameters::begin
setParameters::POINT=26
setParameters::IDATE=20140701
setParameters::ITIME=172024
setParameters::MDTXT=
setParameters::READR=MJONES
setParameters::RECDV=0
setParameters::RECDU=***
setParameters::RECDVI=X
setParameters::CODGR=
setParameters::VLCOD=
setParameters::CODCT=
setParameters::IV_WORK_ORDER_OBJECTNR=OR000004000293
execute::::MJONES::before BAPI execute: /SMERP/PM_DOMEASUREMENTDOC_CRT
User::rethrowException::begin
User::rethrowException::Exception caught: Unit *** is not created in language EN

Music appearing on my list not downloaded by me

I am a new user and have only downloaded two free songs so far. Ihave been in the process of importing my cd collection for now. All of a sudden there are songs showing up that I've never heard of. why is this happening and how do I get it to stop. And why ia there no easier way to contact itunes direct?

the music that might appear in your iTunes could be music it found on the computer. If it came from iTunes, you can find the date purchased under the store>check for purchases menu. and you can write the iTunes music store, by going to www.apple.com/support/itunes/store and clicking on one of the links in the customer service field

Measuring point Not on device

Hi ALL
We are on MI 7.1.
We are facing an issue with Measuring points. During the first sync the Measuring points were downloded to the device.
We created new Measuring points in R/3 and these new ones are available on the Middleware but on the device.
The Funct Locations linked to these Measuring points are available on the device. There are other Measuring points available for these Funct. Locations ( downloded during the first sync) but the new Measuring points are not available on device.
Did someone came across this issue, what can be the reasons behind this?
Regards
Manish bansal

Hi
The query is resolved.
I have to run the program MEREP_REPLICATOR_START for Funct. Location also.
After running the program it worked.
Regards
Manish

Unable to Inport Measurement points and Measure documents from R/3 to clien

Hi,
I am not able to import measuring points and measuring documents into the client device even after assigning the measurement point varaint in the back-end config.
Please help!
Thanks & Regards,
Kanwar

Hello Kanwar,
I am thinking of two reasons at the moment.
1. The equipments/Functional location which you had downloaded to your device were not having measurement points. If this is the case, you need to make sure that corresponding Equip/FL's are there on client (provided case 2 is not valid)
2. The measurement points were not replicated. Hope you had checked MEREP_207 table for the required measurement points.
Hope this helps.
Best Regards,
Subhakanth

Measuring Point for Tools and Die Maintenance

Dear All,
I am trying to map the following process:-
My client has 10 press machines and around 250 Dies for punching. Dies are assembled to press machines and they produce jobs by punching.
Client has an Preventive Maintenance plan for each Die in terms of number of strokes punched by an Die. for e.g PM is done after every 300000, 600000, 900000, 1200000 strokes. Estimated life is 1200000.
What they want is when production person confirms the production order say for 10000 jobs the counter of the die should increase by 10000.......and so on. When the counter reaches 300000 preventive maintenance call should be scheduled.
What i have done is created an Die as an Equipment with PRT as equipment category. Created an measuring point for that Die, assined Usage formula etc.
I have created an Maintenance plan for that die in which i have assigned the strategy (IP11) which contains the stroke cycles 300000, 600000.........etc.
Assigned the Die as a PRT to the material which is to be produced in the Routing.
When i confirm the production order the counter of the PRT increases which i can check IK13.
What i am expecting is that in IP10 system should update the counter automatically so that when the counter reaches to 300000 maintenance call wil be scheduled and order will be generated.
I would request you to please give me some input on this.
Thanks and Regards,
Rashmi

Hello Rashmi;
I have seen the screen shots & there are problems with the following:
1) Counter overflow reading
You have entered 130; keep it as- 999999 (it is the reading after which system starts counting from 0 value)
2) Formula that you have used;
You have used the formula- SAPF02; do not use this. Create you own formula with following details: SAPF99 (new formula) = SAP_20 * SAP_09
3) You have manually entered the reading for the measuring point; do not use it. System will calculate the measurement reading from PRT usage value.
CREATE a single measuring document with reading as '0'.
4) Also in CA01; you need to assign this PRT in routing with "EQUIPMENT" & not material. Also make sure that in the same screen (assignment of PRT- basic data) maintain usage value as 1 (if this is not maintained, measuring doc. will NOT be updated).
5) Now when you confirm the production order, based on number of units created; system will automatically create the measuring doc.
If there is any problem with CA01, CO01 or CO11n; ask your PP consultant to assist.
Do let me know if there is any problem in this.
Regards
Hemant

Deletion of Measuring points from the Notification

Hi
I have created a notication and attched manully some measuring point. (Extras-->Measuing document, New Entries and added the measuing points). I want to delete the measuring points from the notification. It displayes the msg "1 MeasDocs cannot be deleted as they already exist in the database"
Note:The measuring points are not attached to the tech object.
Please let me know how can we delete this MP's or what alternative i need to follow.
The system msg display below:
HELP msg "
1 MeasDocs cannot be deleted as they already exist in the database
     Message no. IR 018
Diagnosis
     You are trying to delete measurement documents that the system has
     already written to the database.
System Response
     The system cannot perform the function.
     You can only delete measurement documents online at the creation stage.
     Once you have saved a measurement document, you can only delete it using
     a special reorganization program."
Thanks & regards,
Mujeeb

hi
For using archiving programme take help of basis help see firstly create programme on archiving object
PM_IMRG whcih is the object for measuring document then by ebtering this prepare the archving file run in test mode
then deletion of data with date wise reading in test mode follwed afterwards.
you have to confirm the data before the deletion
Regards
chandrashekhar

Gap in measuring points

Hi forum:
I created measuring point 45 (internal), when I display measuring points list I realize the earlier number created is 39, meaning there is a gap of 6.
What can I do to avoid this gap in measuring points?
Regards.

This happens in Measuring Points, because any attempt to create a MP and cancel it without saving, consumes one number. At the same time there is no significant disadvantage due to missing numbers in MPs. You may sort or search them by the Equipment numbers.
Regards
Jogeswara Rao

Measuring points-Time Confirmation

HI Gurus,
Once work order gets created thru preventive maintenance plan....we need to do a time confirmation for the completed work.When i do IW41 and clicked the measuring points button at the top.....I am not getting all the measuring points which was created for the same piece of equipment...When I cliked the measuremnt all object..I can able to see only the first measuring point...how to see all the measuring points linked to the same piece of equipment ?
Please help.
Regards,
Vijay

I agree we can able to see the measuring points...but my problem is...I`ve included the measurement routes and created the one plan .....once the wo created...I need to do time confirmation for tht order which has all the different equipments associated in maintenace routes.When I do IW41...I can see only header level equipment measuring point and not the rest of all measuring points associated in routes.As one person is goin to do all the similiar work for different equipments...we maintained one work order and one time confiramtion...but due to unavailable of measuring points...I cannot able to do the time confirmation for rest of the equipments which is in the routes.
Regards,
Vijay

External number range for measuring point

Hi experts,
How to assign external number range for measuring point ?
Regards
Shashi

I have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
SAP documentation as follows:
Create Number Ranges for Measuring Points
In this step you define number ranges for measuring points.
Notes
As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
Jim
Edited by: JamesPetrie on Feb 28, 2012 2:45 PM

Add measurement point / counter

Hello,
I am facing the problem that I need to add a counter value to a measure point. For this I have the equi no, the pos of the counter and the value I have to add. If the measurement point does not exist, I have to add one by creating it with the information about the pos and measurement point.
Could someone tell me if there a some BAPIs that help finding the measurement point by equi no and pos? How to add the measurement point if it is not existing? I just saw some code that reads the information in the tables but is there something more standardized?
Thanks a lot, Vanessa

In a previous assignment, I used BDC/transaction call for IK01, when I found that the measure point did not exist. If I remember correctly, it was a very short, simple process. I believe I followed that (upon sy-subrc eq 0) with a BDC/transaction call for IK11.
But, please take a look at Function Modules named like BAPI_MP. The BAPI_MPIP modules may give you what you need.

Specify measuring points in tha task list

1. Can i specify measuring points in tha task list. ie. i want to measure some specific reading in preventive mtc. like temperture etc.
2. can i fill measurement reading through orders like we do in case of notifications.
pl reply

Hiii Ravi
Measurement reading is maintained against measuring poisition for the equipment. So measuring point is assigned to equipment.
You can create the tasklist for measurement of different reading & you can maintain the reading while making the confirmation of the each activity/operation.
Against the order you cannot update the measurement document & measuring point cannot be assigned to particular tasklist/task /operation as it is poperty of equipment & not of that task or operation or tasklist.
I hope this will satisfy your query if not let me know.
Regards

Attaching measurement point in task lists

Hi experts
Here we decided to go to measurment points (by valuation codes) rather than tassk lists for prev. maint. As like task list each speific measurment point has to trigger in order based on frequency required. Just user capture the valuation codes at measurment docs. then we cud see the results at IK17.
But iam not finding the way to do , linking the task lists by prev. orders. can you suggest us

Hi,
If you are on ECC 6.0 with EHP4, Measurement points can actually be associated to operations as a PRT on task list or directly on the order. This functionality(Inspection rounds) has been provided as part of Enterprise asset management continuous improvement under Enterprise Business function set. The measurement points are automatically proposed during the completion confirmation of the relevant operation.
http://wbhelp.sap.com/ERP2005_EHP_04/helpdata/EN/48/689d3dd2613c87e10000000a42189c/frameset.htm
if you are not at this level or not plan on getting there in the near future a custom or manual solution is your only option.
Hope this helps.
Narasimhan

Measurement points list not downloaded in MAM 2.5

Similar Messages

Maybe you are looking for