Measures goes suddenly blank in WebI report.

Hi,
I have a Universe based on a BeX Query on top of an ODS. My WebI-query on this Universe selects 8 dimensions, 2 details and 8 measure values. But when I show all of the objects in a report, the measure values are blank. If I remove one of the dimensions, all the measure values are shown.
Any ideas on how to fix this?

Hi,
can you check two things - are the values shown after an additional refresh of the report ?
if so - could you check in the Universe Designer in the properties of the actual keyfigure if it is configured to do a "database delegated" summary ?
ingo

Similar Messages

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

Drill function implemented on Measure object column in the webi report

Post Author: madan kumar
CA Forum: WebIntelligence Reporting
Hi,
I have a small issue in my project.(Maintenance Project)I created a measure object in the fact table of the existing universe and saved and exported to the repository. (Say Measure object is D where D = A-(B+C))I inserted the same object as a column between two measure objects columns of a existing WebI report.
The report has two hierarchies involved - each hierarchy has dimension objects involved.I have checked with the hierarchies to make sure that measure object is not involved.The scope of analysis is None for the query.Version is BO XI R2.
The issue is the Drill function is implemented on that particular new column.The drill function should be applicable only to the two dimension objects involved in the report.But this measure object column is also getting drilled once the Drill option is selected.I had to remove the drill optiion from the Measure object column.
Can anyone help me on this issue...
Thanks in advance...
Madan Kumar

Sushil
Thanks for your reply. I did the date diff on the columns. It does not break into 3 different groups. I am using a function called previous on the date column. So the report is like this
    DATE                           Pervious (DATE)                 Date - Pervious(DATE)
01-01-2008 01:06              Null
01-01-2008 01:12              01-01-2008 01:06               :06
01-01-2008 01:18              01-01-2008 01:12               :06
01-01-2008 01:24              01-01-2008 01:18               :06
01-01-2008 01:30             01-01-2008 01:24              :06
01-01-2008 01:36             01-01-2008 01:30               :06
Basically we are breaking on the Date - Previous ( Date) column which does not work. I am not sure if there is a way to break this. I even tried it in Crystal REports XI and it does not work their either. Any help with this issue with be greatly appriciated.
Edited by: Srinivasa Prabu on Aug 4, 2008 2:55 PM
Edited by: Srinivasa Prabu on Aug 4, 2008 2:56 PM

T61p screen goes almost blank suddenly

While using my T61p (646067U), the screen goes suddenly blank. It's not that the backlight is off, but rather that all the pixels are set to dim. In fact, there are a couple of screen artifacts (some dead/miscolored pixels and white lines across the bottom) that persist even though the screen goes blank.
I can attach an external monitor, which works fine.
The screen goes blank in the middle of a Windows session, Ubuntu, doesn't matter. It will stay blank while I reboot, in the BIOS and everything. Everything else runs fine - I can log in and do whatever as long as I can do it blind or with an external monitor.
Sometimes after the screen goes blank, it returns within seconds, sometimes it takes hours. I've tried turning the computer off and leaving it for awhile, and sometimes the screen is blank when I get back, sometimes not.
I've tried diassembling the thing down to look at the LCD and inverter, and nothing seems amiss. I made sure everything was plugged in securely and closed it back up, booted and the screen was blank.
Any idea what's happening?
It seems like the screen is working, but suddenly stops receiving the image information.

If only I could understand what's going on that would help me A LOT. I understand this is difficult, but there must be some HP expert who knows about this issue. Understanding the problem is the first step.
What could be useful for me to know is where exactly is that sensor, how to locate it, how to test it, what is the module or part to replace it if needed etc.
Here are the notebook and its specs:
http://www.cnet.com/products/hp-pavilion-dv7-1299eb-17-core-2-duo-p8600-vista-home-premium-4-gb-ram-...

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

Hiding the blank cells in Webi report - BO 4.0

Hi,
I have created a webi report in which i have used different types of blocks
1) Form table
2) Verticle table
3) Horizontal table.
so now in real time there chances that some of the blocks will not have any data.(i.e it displays blank cell) in the report.
so now i have to hide only the blank cells and not the table headers.that means though the cells are blank i have to display headers.
what formatting changes i need to achieve this in Webi Report.
If anybody does this please let me know the step by step logic in detail.
Thanks in advance.
Regards,
Naga Nanda Kishore.

Hi,
We cannot hide specifc cells in WebI, however we can choose to whether to display or not empty measure values and empty dimension value.
So you need to select the desired block-> Right Click and Select Format Table-> Uncheck Show rows with empty dimension values or Show rows with empty measure values whichever is required to be hidden.
Hope this helps.
Regards,
Manpreet

Blank page coming in the Webi Report in a particular tab

Hi,
i have a webi report which uses a two Cross tabs.and it is sectioned by 'Business Segment' object. and 'Group name' object has been used to group the data in each cross tab.it has multiple tabs in the report each named same as the group name used in the cross tab.
so now when i export the report into the PDF document one of the tabs is having a blank page (i.e 2nd page is a blank page off the 4 pages it has). i am using XI R 3 version.
so please suggest me what formatting changes to be done for that particular tab(s) to remove the blank page off the 4 pages.
Immediate suggestion is very helpful.
Thanks & Regards,
Kishore.

Hi,
Thanks for your suggestion.however i checked all the cells. everything is well fitted.one more thing is that similar kind of data is visible in other tabs without any issues. so it is happening only in a particular tab.
Any other advanced settings to do to avoid the blank pages in between the PDF document?
Regards,
Kishore.

BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report

Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
Manjunatha

Hi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks.

Blank second page and export error in Crystal 10 Web Report Viewer

We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer. When they view a report that is 12 pages, the first page appears OK. When they click Next to go to the Next page, the page shows as blank. The second issue is that If they try to export the .rpt they get this error:
Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack trace:
[COMException (0x80000220): Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
      CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
[LoadSaveReportException: Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
I can view and export the same .rpt file in my environment without any issues. Has anyone seen these errors before and have any ideas on how to resolve them? They seem to be environment related since I can view the same report OK on my machine.
This is using Crystal 10 on Windows Server 2003.

Hello,
This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
The basic code is:
Private crReportDocument As ReportDocument
    Private Sub ConfigureCrystalReports()
        'Check to see if the report exists
        If (Session("crReportDocument") Is Nothing) Then
            crReportDocument = New ReportDocument()
            crReportDocument.Load("C:\1 - Report\CRParams.rpt")
            'Do anything required for the report
            'Logon to the database
            'Pass parameters
            'Assign the report into Session
            Session("crReportDocument") = crReportDocument
            'Assign the report to the Viewer
            myCrystalReportViewer.ReportSource = crReportDocument
        Else
            'Assign the report that is stored in Session to the report instance.
            crReportDocument = CType(Session("crReportDocument"), ReportDocument)
            'Assign the report to the Viewer for each postback
            myCrystalReportViewer.ReportSource = crReportDocument
        End If
    End Sub
Elaine

Remove blank cell in Webi Report

Hi Guys,
I have one simple ques. how to delete or remove blank cell from Webi Report.
Regards,
Manoj

Mr Manoj,
We assume that one posts questions that are difficult to find and a little patience in waiting for replies.
Please see the [Rules of Engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] page for additional information.
The product guides can be found here, [http://help.sap.com/businessobject/product_guides] please select and download the guide you need.
Thank you!
Simone Caneparo
Forum Moderator

Some blank WebI report sent by publication

Hello
I'm working on BO XI 3.1 SP2.
I have created two webi documents.
The first one contains a report used to list the dynamic recipients of mail.
This report is filled and display : Ids, Full Name, destination mail adress.
It contains undreds of recipients.
The second Webi document contains the datas I want to send to my recipients.
My publication is set with a personalization in order to limit the datas to the scope of each recipient.
For that I use two fields matching in the recipient document query and in the sent document query.
My publixation is scheduled once a week and works fine.
My problem is that some users receive blank reports with the normal publication.
When I try the test mode and I select these users as recipients, filtering the destination list by unchecking the tick box in the dynamic destination screen, I receive the Excel file all filled.
So Can you please help me explaining why my excel files are blank with the normal publication and filled with the test mode.
This problem doesn't appears for all users.
Lot of thanks
Getdaone

Hi Getdaone,
First off you are not supported under XI3.1 SP2 for Product fixes, so I would recommend you upgrade to a supported patch level, i.e. SP3 or SP4.
There a few known bugs with Publications delivering blank reports.
Please check the following SAP Notes to see if any match your workflow:
1540031 - Scheduling a Web Intelligence publication does not return data.
1630285 - Empty report tabs appear in webi report when scheduling through publication.
1539855 - Users get blank Web Intelligence reports from publications with profiles when the report is saved without data in BOE XI 3.1.
1570436 - Publications containing multi-query Web Intelligence reports scheduled to dynamic recipients is missing data or sends blank reports
The bug described under 1570436 is apparently fixed in FP3.7 which should be out in December.
I hope this helps <<Text removed>>
If not then I would suggest raising a support message with SAP.
Kind regards,
John
Edited by: Matt on Oct 10, 2011 10:21 AM

Webi report link to other webi report opening blank page

I have put the hyperlink to link to the other webi report. But once I click on the links. It open the report with blank page. I have tried it in View mode or Edit mode, the browser will open up another blank page. Following is my links:
<a href="http://server_name:28080/OpenDocument/opendoc/openDocument.jsp?sType=wid&sRefresh=Y&sWindow=Same" title="Page1" nav="web">Link to Page2</a>
any advice? Thanks

http://server_name:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AciEzxbPmxdHtQwnB4RHaCo&sType=wid&sIDType=CUID&sWindow=New
Make sure the followings:
1. The webserver runs at port 8080 (if not, use the correct port)
2. the CUID is correctly copied.
3. the target report here is a webi report. (sType=wid)
4. the server name is correctly mentioned.
5. you are using JAVA environment.
If still this does not work, then please let us know :
Are you getting any error? if yes, what error you are getting.?

Webi report without measures

Hi All, I have a Sales order universe created on top of BEx query. When users are running webi report with only Sales Order and sold to party, webi is not returning any data. When I add a measure to this report it is returning data. From BEx I can run a report and getting data for Sales order and sold to party combination. Why is Webi not returing any data? How can I make my webi to work with these kind of master data combinations?
Thanks
Sasi

So are you looking for both master data and transactional data in the report? If it is just the transactional data you could build a dummy key figure EG: number of rows in the bex and pull into the webi report.

Bw web report plugin http session hangs at the server side

Hi,
I am having problems when closing the browser of a BW web report. After I closed the browser by going File->close, I ran SM04 and found out the Plugin HTTP session hangs at the server side.
How can we terminate the Plugin HTTP session at the server side when user closes the internet browser?
I did implement a logoff function at my web template, if user clicks on the logoff, the Plugin HTTP session is terminated at server side correctly. But As you know, 50% of time user will close the report by closing the internet browser instead of clicking the logoff. That leaves lots of hanging Plugin HTTP sessions at our server side.
By the way, we actived our BEX service at the SICF.
Thanks for help!
JA

Hi
If you want to avoid a blank page with logoff button, add opener=0
<a href="<SAP_BW_URL CMD='LOG_OFF' ~command='logoff'
>" onClick="javascript:window.close(opener=0);">Log off</a>
If you want to close the session via X, use this code:
create a sapscript function
function closeSession()
logoff()
window.unload=CloseSession()
However, the Plugin HTTP session isn't killed.
Regards

Open a webi report from a Dashboard components

Hi All,
I have created a dashboard using Dashboards 4.0.It has a bar chart,line chart,combination chart.all these chart on X-Axis have month names as dimensions and y - axis shows different measures.
So now the requirement is the user wants to select any month from any one of the chart at one particular point of time.then the dashboard should open a Detailed Webi report( created in BI Launch pad) for the selected month and display that month data in a new window.
I know that we have to use the URL button in Dashboards for linking a webi document.
However i would like to know how to pass the selected month from the dashboard by selecting a particular month from any of the graph component as a parameter to the respective Webi report in BI Launch pad.
Hence any body how to implement this in Dashboards please let me know the step by step process.
Thanking you,
Regards,
Naga Nanda Kishore.

Hi Kishore,
Month name should be prompt for the Detail Webi Report, so when u clicked on bar its going to carry that Month as Well. And Syntax for adding Month will be like below.
Suppose if it is Sample Open Doc:
/BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC
So u have to use this Syntax for Month
lsSMonth=+ Map the Cell where month is capturing. (Note:In lsSMonth Month is next of Prompt for month in Detailed Report.
And final URL will be
"/BOE/OpenDocument/opendoc/openDocument.jsp?mistype=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC&lsSMonth=+Selected Month"
(Open Doc) (Sending (Selected Month) Month)
And For trigger the URL button you have keep trigger URL when Month Value changes(Based on Selection), means you have map trigger cell to destination of Bar chart Month Destination.
Thanks and Regards
Sateesh

Measures goes suddenly blank in WebI report.

Similar Messages

Maybe you are looking for