Measuring data mess! Meas.doc gets created,but doesn't update plan!

Hi colleagues,
During testing I have encountered weird problem..
The measuring data, which I fill while TECO for work order stopped being consistent with measurement document list and maintenance plan counter reading in particular..
So, when i enter measuring data when TECO, the measurement document gets greated (with number!), however it is NOT visible in IK17 and if i go to IK11, it shows the old counter reading (before I entered new data when TECO)..
What is more, the counter reading field in IP10 DOES NOT get updated as well!!
Do you have any idea, why that can happen?!
Thanks in advance

yes, when i create via IK11 it gets updated and it's visible in IK17 etc.
while when create meas doc when doing TECO, even though the actual doc is created (with number, e.g. 617), when I go after that to ik11, it would show me prior value (last doc 616) and it wouldn't let me enter new value, issuing first warning message "1subsequent doc was created" and then error message "Counter reading in doc. 618 larger than in subsequent doc. 617".. the only way to see meas doc 617 is in IW32 via extras/doc for order/meas doc or via IK12. It is not visible with IK17..
it's so weird...

Similar Messages

I purchased snow leopard and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update. It restarts but doesn't update after disk installs

I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8. It restarts but doesn't update after disk installs. Do I need 10.6.0 to install first?

Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.

PO is getting created but showing error is address with status of IDoc - 51

Hi Experts,
I am using IDoc type - PORDCR103
Process code - copy of IDOC_INPUT_PORDCR1 (Function Module)
After processing through WE19 it is generating an IDoc number with status - 51 showing error in Address , But it is creating a PO.
My requirement is In status -51 It should not create PO.
Inside IDOC_INPUT_PORDCR1 a Bapi 'BAPI_PO_CREATE1' is used for creating PO. Here In RETURN parameter of BAPI a Row is comming with Message type - E. Some other messages are also there of type 'S' and 'W'.
After processing , PO is getting created with staus - 51.
Please help me .
Thanks
Susanta
Edited by: Susanta22 on Oct 11, 2011 12:29 PM

Hi,
in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
if u have any conerns let me know
Regards,
Nagaraj

Infotype 1000, Position data IDOC is not getting created via RBDMIDOC

Hi All,
We are using PFAL styandard HRMD_A message type, while executing RBDMIDOC with message type HRMD_A, all the infotypes data IDOC is created except Infotype 1000 Position(S).
The same is (Infotype 1000, position IDOC is created in dev server) but the same is not getting created in Quality and Prod.
Can any one suggest the same, what could be the error.
Thanks.

Hi,
You need to check in your filter settings in BD64 for your corresponding distribution model, if you have included IT1000 for PD objects such as O, C, S. After adding this filter group, you have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, you have to generate partner profiles (environment> generate partner profiles).
Hope it helps,
Christine

CJ88 - AUC getting created - but without values

Hi all,
I have run CJ88 for settling WBS to CC to create an AUC. But the AUC asset is created without values. Please let me know the reason behind the same. Many thanks.
Regards,
S.Sumana

Hi,
U r question is little unclear...
If u settle WBS to Cost Center, all the values will be posted to cost center but not to AUC. check the settlement rule of u r wbs and make sure u have AUC asset as the receiver.
Regards
Sudhakar Reddy

Some numbers docs not opening but requesting app update

As the picture shows, and the title suggests, when trying to open some docs in numbers I recieve a request to update the app. No update is available.
This is on both my iPhone 4s and iPad 3. Both are running up to date software. It also happens in pages too.
I have iCloud work installed on my Win 7 laptop, and only noticed this since iCloud work was released just after ios8 was.
I have reinstalled pages as well. Any ideas what I can do here?
Thanks!

Really surprised there was no response from the community on that one, but not a big deal. I just had to reset passwords all over the place.
But now I've got some other weirdness, possibly iCloud related. I did a repair permissions and Pages was able to open docs from iCloud. But now it's happening again. I can't open from iCloud and I tried downloading from iCloud through a browser but Pages still won't open the docs. I decided to try signing out of iCloud and that just sucked up all processes, system ground to a halt while signing out was supposedly going on. I had to force quit everythig else and still it didnt complete signing out. I was able to restart
But now i have to reauthenticate with iCloud and its another 15 minutes gettig everything back in sync. This is miserable. I was able to open a Pages doc finally. :(

Had CC for a year. Want to get again, but doesn't say I qualify for the $29 pricing because I haven't owned any previous software?

As the title states. I had the student version of CC for a year. The $29/month would help me a ton, but it says I haven't owned any Adobe software before. Did having CC for a year technically not count as owning the software?

Thanks for the info. Seems kind of messed up though. Why would Apple let any random user of a machine control all future upgrades of critical apps. I guess perhaps my admin password was needed at some point, which my son has. Still, seems this is something you should be able to undo.
I'm starting to get a clearer pictures of what's going on. These 3 apps are part of iLife 11 and normally cost $14.95 each. They come pre-installed on new machines, but it looks like at some point you need to associate this "purchase" with an Apple ID, and can only associate it with one Apple ID. Thus they are now irrevocably associated with my son's Apple ID.
However, if I wanted to shell out the money, it seems I should be able to tell this particular mac to forget everthing it knows about the purchase of these apps, and re-purchase them from another Apple ID. Although I doubt I'd do that at this point, if I by a 2nd Mac and properly associated these apps with my Apple ID on this 2nd mac, I should then be able to use this "purchase" to download the apps to the first mac I'm having a problem with. However, currently I can't even see a way to do this. Is there some App Store cache I can trash so App Store no longer knows which apps were installed by which Apple ID?

4.2 bug/issue: imported app is created but doesn't show up in builder

Hi all,
We are running into an issue in APEX 4.2 when importing an application.
The issue is already explained in every detail several years ago on this forum but it wasn't answered:
https://community.oracle.com/thread/2464689
Any suggestions these days?
Regards,
Bart

That would be because the PXI 5124 is a digitizer not a analog input device. You need to use the NI SCOPE driver not NI DAQmx
Jeff

How do I edit a document that I've created but doesn't respond to normal edit effects

I cannot edit a document I created. It doesn't respond to usual method. Has it become pdf? the icon in documents has ring binder.
Thanks

try67:
Thanks, that did the trick.
Ernie

Import Works but doesn't Update Members

Hi
I think we have a problem with a transformation/conversion file setup or possibly a problem with the data file which is being uploaded.
Here is the transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER =
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=NO
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
NULLAMOUNTVALUE=0
*MAPPING
TIME=*MVAL(10:13)
OHCOSTCENTRE=*COL(1)
ACCOH=*COL(2)
RPTCURRENCY=*COL(8)
DATASRC=*COL(5)
CATEGORY=*COL(4)
BRAND=*COL(3)
PROJECT=*COL(7)
OPTIONAL3=*COL(6)
MEASURES=*COL(9)
*CONVERSION
TIME=TIMEPIUK.XLS
Here is the conversion file:
EXTERNAL     INTERNAL     FORMULA
P1-11     2011.P01
P2-11     2011.P02
P3-11     2011.P03
P4-11     2011.P04
P5-11     2011.P05
P6-11     2011.P06
P7-11     2011.P07
P8-11     2011.P08
P9-11     2011.P09
P10-11     2011.P10
P11-11     2011.P11
P12-11     2011.P12
P1-12     2012.P01
P2-12     2012.P02
P3-12     2012.P03
P4-12     2012.P04
P5-12     2012.P05
P6-12     2012.P06
P7-12     2012.P07
P8-12     2012.P08
P9-12     2012.P09
P10-12     2012.P10
P11-12     2012.P11
P12-12     2012.P12
...and here is the data file:
Ohcostcentre,Accoh,Brand,Category,Datasrc,Optional3,Project,Rptcurrency,Measures,P9-11,P10-11,P11-11,P12-11
202175090,5000002150,0000,SD4,INPUT,00000000,000000,LC,Periodic,1,2,3,4
202121132,5005002130,0000,SD4,INPUT,00000000,000000,LC,Periodic,1,2,3,4
On running import the data appears to have been uploaded i.e. 8 records imported and no rejections but when I then check the EVDRE report none of the members have been updated with these values. I've checked and all the members that I'm writing to are valid in the cube as well.
Has anyone else experienced this? If so how can I go about resolving this issue?
Thanks,
Jamie

Hi all
I've now changed the transformation file to not look for the "Measures" dimension and amended the data file so it does not include that either.
Here is what the transformation file currently looks like:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER =
SKIP = 1
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=NO
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
NULLAMOUNTVALUE=0
*MAPPING
TIME=*MVAL(9:20)
OHCOSTCENTRE=*COL(1)
ACCOH=*COL(2)
RPTCURRENCY=*COL(8)
DATASRC=*COL(5)
CATEGORY=*COL(4)
BRAND=*COL(3)
PROJECT=*COL(7)
OPTIONAL3=*COL(6)
*CONVERSION
TIME=TIMEPIUK.XLS
...and the data file
Ohcostcentre,Accoh,Brand,Category,Datasrc,Optional3,Project,Rptcurrency,P1-11,P2-11,P3-11,P4-11,P5-11,P6-11,P7-11,P8-11,P9-11,P10-11,P11-11,P12-11
202175090,5000002150,0000,SD4,INPUT,00000000,000000,LC,,,,,,,,,289331.12,2234.87,3293.03,42536.11
202121132,5005002130,0000,SD4,INPUT,00000000,000000,LC,,,,,,,,,289331.12,2234.87,3293.03,42536.11
The file is still being rejected but for some reason it cannot pickup the time header i.e. P1-11, P2-11, P3-11 etc.
Here is what has been rejected from the file, you can get an idea of how the system is interpreting my file:
Task Name : Convert Data
OHCOSTCENTRE,ACCOH,RPTCURRENCY,DATASRC,CATEGORY,BRAND,PROJECT,OPTIONAL3,TIME,AMOUNT
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,,-0
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,289331.12,-289331.12
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,2234.87,-2234.87
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,3293.03,-3293.03
202121132,5005002130,LC,INPUT,SD4,0000,000000,00000000,42536.11,-42536.11
Thanks,
Jamie

Changing scaleX/scaleY on parent scales the children but doesn't update height/width property ?

have created a custom component - MyImage - that has two children including a Bitmap as well as a Sprite.
My display object hierarchy is as follows -
mx:Canvas
view:MyImage
     mx:Bitmap
     my:Sprite
If I change the MyImage.scaleX, scaleY property, the children scale as I would expect them to.
However when I try to place the children in the center using placeAgain() on getting a resize event:
    public function placeAgain():void
        if (image==null) return;
        var pCanvas:Canvas = this.parent as Canvas;
        if (image.width <= pCanvas.width)
            pCanvas.horizontalScrollPolicy="off";
            image.x = (pCanvas.width -image.width)/2;
        else
            pCanvas.horizontalScrollPolicy="on";
            image.x=0;
        if (image.height <= pCanvas.height)
            pCanvas.verticalScrollPolicy="off";
            image.y = (pCanvas.height -image.height)/2;
        else
            pCanvas.verticalScrollPolicy="on";
            image.y=0;
        alignKids();
I find the image.height & width have not changed despite the image getting scaled!
Isn't the child supposed to have its bounds changed after scaling its
parent ? Especially after the child has actually been scaled correctly ?
Why are bounds of the child stuck at the same value as before scaling? I
am not caching the Bitmap, have not turned on caching of bitmaps.

If I'm not mistaken, the bounds are updated with the scale. You rare not referencing the bounds, your referencing the width and height properties, which is a bit different. What happens if you use the getBounds function to get your dimensions?

Podcast feed validates but doesn't update in store

Hi, I'm hoping someone can help me with this.
I have a podcast http://itunes.apple.com/us/podcast/the-hollywood-5/id413752904
that is pulling from http://www.thehollywood5.com/feed/podcast
subscribers are able to get all the podcasts fine (there are 3 currently), however itunes store is not showing any of the new podcasts. Episode 2 was added 6 days ago, and it still doesn't show up in itunes store. I've tried pinging...and still nothing. Can anyone see any reason why this would be happening to me? Your insight is really appreciated!
Thanks,
Joey

fyi...i figured it out. Im sure this will help other people as well. I read somewhere that itunes wont stick around if the feed doesnt open up in 2 seconds.
For whatever reason my feed was taking about 2 seconds to open because its being fed via powerpress and as we know sometimes wordpress can take some time to load. I think in particular my server is currently having issues making the database connections as fast as they should be. Obviously im going to try to address this issue, but thats a completely different issue.
Anyways, the solution was to redirect my feed via htaccess (obviously htaccess is called before wordpress is so its super fast) to feedburner (which is also fast) and voila, literally within minutes, the store has now updated all of my episodes. So i would say the problem was that itunes definitely moves on if the feed isnt pulled in under a certain number of seconds. That or this is all a complete coincidence, however I think not.

Button configure as Update but doesn't update the document

Hi,
I have a form for a document library. I also created an Approval workflow for it. Once the requester completed and created a form, the WF then starts by emailing the approver to approve/reject the request. I have 2 optional button for Deny
or Approve. Each have rules that sets the Request-Status field to show approved or deny. There is a button that I configure as "Action: Update Form".
Well, I select the Approve/Reject button, then select the Update button, close the form and no data was updated. I added back the Form's Save button in the top ribbon, using that Save button then saves the data. The Update button on the ribbon
also doesn't save the data.
What is wrong with my Update button and how to fix this?
Thank you.

Could you just map the buttons functionality to the Save action instead? Same result if it works.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Photos App Uploads Photos But Doesn't Update

Running the latest version of iOS, though I've had this problem for 3 or 4 months now. I'm using iCloud Photo Library (I'm aware it's still a "beta" feature, but this seems like a fairly prevalent issue and it's a relatively new issue). The Photos app will upload new photos I take with the camera, but it continuously says it's uploading, for instance... if it says that it has 75 photos to upload, I take an HDR picture (because I keep the originals), and it says 77 photos to upload. It will upload them, I know this because my computer downloads them. However, my phone will still say it has 77 photos to upload. My iPhone also, will not download new photos, my guess is because it still thinks it needs to upload 77 photos, and probably just iterates over all the stored photos looking for ones that aren't in iCloud, anyways... it doesn't download new ones (or old ones it doesn't have yet) and it's annoying not knowing how many are left to upload.
I had a theory, that turning iCloud Photo Library off and on again, allowing it to remove all locally stored "optimized" photos in between, would fix the problem. But I didn't want to try that without knowing that it wouldn't delete any photos that might not be uploaded already.
So, summing up...
Will turning off icloud photo library delete any photos that aren't uploaded? Should I perhaps plug it into my computer to import any that aren't already there the old fashioned way?
Any other potential solutions for fixing the problem? I imagine I can't be the only person using the iCloud Photo Library beta who takes several pictures a day (on average).

chuckfletcher,
Did you see something like this?
If tapping the UPDATE button takes you to the Reader's Help screen, Reader must have been automatically updated already.
To check the version number
Go to the iOS home screen.
Tap Settings.
Scroll down to find Adobe Reader in the left pane.
Select Adobe Reader.
Check the version number.
As of October 11, the latest version is 11.6.3 (100920).

Infotype 0573 not getting created

Hi All,
We have an R/3 transaction created for leave application and this is showcased in EP6.0 portal as an Internet Service. Now, when we apply for leave using this application through portal, for certain employees, infotype 0573(Absence infotype for Australia PS) is not getting created but 2001 gets created. When we try doing the same through PA30 or through the R/3 transaction itself, everything is going on fine. Only while applying through portal, this issue occurs. This was working fine in EP5.0 portal.
Can anyone suggest a way to sort this issue? Any help will be rewarded.
Thanks and Regards,
Leena

Hi Leena
Please note that the function module HR_ABSENCE573_REQUEST_PBS was internally used by SAP only for corresponding ESS services of Leave administration Australia Public sector functionality. The behavior for the function module is as expected, when
called from corresponding ESS services. Further the same function module is currently not enabled to be used outside the same. Also there are no further issues with creation of Infotype records in 0573 and 2001 (which are consistent) from PA30 (Maintain Master data).
Hence would you please check if you are using the standard function module
HR_ABSENCE573_REQUEST_PBS and perform an operation. As I mentioned Function module HR_ABSENCE573_REQUEST_PBS which is currently being used by ESS services for Leave administration.
Regards,
Jun Wu
SAP HCM Support team (AU/AU-PS)

Measuring data mess! Meas.doc gets created,but doesn't update plan!

Similar Messages

Maybe you are looking for