Measuring point does not exist

Hi,
I am facing problem in pi sheet where in co54 while sending the process msg i am getting the error
"Measuring point does not exist"
"Destination YI16 COCI_MEASUREMENT_DOC_CREATE cannot process the message"
"Message is not sent to any destination"
Can any body help....
Rajsekhar

Hello
Check the link below for the info you can gather using the Container Variables.
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards
Mark

Similar Messages

Cost/revenue rate E_MOE_DEC, 00000000: unit of measure PDA does not exist

Dear community,
I am still working on SAP PPM FICO & CATS integration.
I can't replicate my cost/revenue rate in the ECC system.
There is the error message : Cost/revenue rate (name of the cost/revenue rate) : unit of measure PDA does not exist
Does someone know what PDA is ?
I customized the units with FTE.
Thank you in advance for your help.
Best,
Cassoké

Hi Cassoke,
Through analysis found that you need to define 'Units of Measurement' PDA which is linked to the capacity unit 'FTE'.
Just check whether you have the PDA unit of measurement in tcode-CUNI or under SPRO-->PPM-->Portfolio Management-->Global Customizing-->Global Settings-->Define Units of Measurement.
Select dimensions 'Time' and click on 'Units of Measurement' and if no PDA entry is there, create an entry(Attached screenshot for your reference).
Hope this helps.
Regards,
Ravi

O4G1 - Unit of measure group does not exist

Dear all,
This is error exists in O4H1 : Unit of measure group does not exist.
I have created the group following by this path: Industry Solution Oil & Gas (Downstream) -> HPM (Hydrocarbon Product Management) -> Oil- and Gas-Specific Units of Measure and Additional Stockkeeping Units -> Define additional stockkeeping units of measure (Transaction O586).
But i don't know how to use this UOM group. Pls help!
Thanks,
Edited by: Le Vinh Quang on Dec 29, 2010 8:05 AM
O4H1 --> O4G1

Hi,
Maintain in the Material Master data for your material.
The UoM Group field is on the Oil-specific data tab in MM02.
BR,
Barna

How to correct CIF error Base unit of measure does not exist?

Dear experts,
I'm trying to cif a location product with base unit of measure KG in R/3 and alternative unit of measure well maintained.
it gives me a CIF queue saying that
"Base unit of measure ZXX does not exist (Product 0000000000000XXXXXX has not been created)"
I do not understand why, the unit ZXX does not exist in the alternative unit of measure for any of the materials managed
I also checked CUNI table and ZXX is not there neither in R/3 or APO,
Thanks for your help
E

Looks like the Alternate UOM --Zxx is not maintained in APO.
2 ways to do this:
(1) program- RSIMPCUST
Re transfer all your UOM settings from R3 to APO
(2) Manual Maintenance in APO:
SPRO>SAP NETWEAVER>GENERAL SETTIGNS>Check UNits of Measurement
Thanks
Kumar

SCCM 2012 R2 - Reporting Services Point installation - "The Datasource does not exist"

Hi all,
Quick bit of background, we have SCCM 2012 R2 installed on a Windows 2012 R2 server. We have the SQL back end off box, configured on a SQL 2012 R2 server running on a Windows Server 2012 R2 cluster. Then there is yet another server which runs the reporting
services. I've just tried installing the Reporting Services Point on the srs server but it doesn't appear to have worked that well. Here's the info i've got back:
A] Site Status > Reporting services point:
SMS_SITE_SYSTEM_STATUS_SUMMERIZER
Site System Status Summarizer detected that the availability of the "Reporting services point" role on server "\\NA-SQLR01.in.tna.local" has changed to Failed.
B] The last message from the SMS_SRS_REPORTING_POINT Component Status is "Site Component Manager successfully installed this component on this site system"
C] Here's the first chunk of info which appears in the srsrp.log file:
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 4204 (0x106C).
This is a SRS Reporting Point Role as SRSRP registry key exists.
Waiting for changes for 0 minutes
Timed Out...
Set configuration
Check state
Check server health.
Successfully created srsserver SMS_
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlserver.local\SQL1] [SCCM_XXX] [ConfigMgr_XXX] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [xxx\SCCM2012Server]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
STATMSG: ID=7405 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_SRS_REPORTING_POINT" SYS=sqlreportserver.LOCAL SITE=P01 PID=2120 TID=4204 GMTDATE=Wed Apr 08 08:56:05.349 2015 ISTR0="ConfigMgr_XXX" ISTR1="sqlreportserver.LOCAL"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
WARNING: Could not read registry key HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\MPFDM\Inboxes\ on the server, The operating system reported error 2: The system cannot find the file specified.
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
After this point i simply get the following info messages looping endlessly:
Set configuration
Check state
Check server health.
Successfully created srsserver
Reporting Services URL from Registry [http://sqlreportserver/ReportServer_SQL2012/ReportService2005.asmx]
Reporting Services is running
The DataSource does not exist.
[sqlreportserverlocal\SQL1] [SCCM_XXX] [ConfigMgr_P01] [sqlreportserver.LOCAL]
[SQL2012] [1] [] [XX\SCCM2012Server]
[1] [0]
Confirmed version [11.0.5058.0] for the Sql Srs Instance.
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_XXX' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetProperties(String
Item, Property[] Properties, ItemNamespaceEnum itemNamespace, Property[]& Values)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.GetProperties(String Item, Property[] Properties, Property[]& Values)
Extract resource language packs if exists
Loading localization resources from directory [D:\SMS_SRSRP\SrsResources.dll]
Looking for 'English (United Kingdom)' resources
Looking for 'English' resources
Found resources for 'English'
System.Web.Services.Protocols.SoapException: The item '/ConfigMgr_XXX' cannot be found. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ItemNotFoundException: The item '/ConfigMgr_P01' cannot be found.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.SetProperties(String
Item, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.SetProperties(String Item, Property[] Properties)
System.Web.Services.Protocols.SoapException: The permissions granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user
'NT AUTHORITY\SYSTEM' are insufficient for performing this operation.~ at Microsoft.ReportingServices.Library.ReportingService2005Impl.CreateFolder(String Folder, String Parent, Property[] Properties, Guid batchId)~ at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateFolder(String
Folder, String Parent, Property[] Properties)
(!) SRS root folder was reported missing
Failures reported during periodic health check by the SRS Server sqlreportserver.LOCAL.
Registry change
Waiting for changes for 1 minutes
Has anyone come across this issue before? Must admit, I'm not too hot on the sql side of things so any advice or suggestions would be greatly appreciated. Thanks in advance!

Hi guys, cheers for the swift response.
Garth, i can access SSRS in IE from the SCCM box and it looks a-ok.
Paul, nope can't say I've done any configuration of reporting services - the whole thing has been set up by the database team. Having had a trundle through Reporting Services Configuration Manager, it seems the Database team have set up SSRS in line with
the walkthrough you posted.
Since i'm not seeing the ConfigMgr_XXX folder appear in SSRS I'm wondering if there's something preventing SCCM from being able to create it. The message
"Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions
granted to user 'NT AUTHORITY\SYSTEM' are insufficient for performing this operation" sounds like the account SCCM is leveraging to perform the install might not have the right permissions in SSRS. Do i need to delegate specific rights to the NT
AUTHORITY\SYSTEM account in SRS perhaps?

Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"

Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
    id integer primary key,
    pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
    rid number,
    val_d1 number,
    val_d2 number,
    val_d3 number);
insert /*+ append */ into xyz (
    select
        rownum,
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(1,10000),2),
        round(dbms_random.value(20,50),2)
    from dual
    connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
    l_id pls_integer;
begin
    for i in 1..50 loop
        l_pc := sdo_pc_pkg.init(
            'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
            sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
            0.005, 3, null);
        l_id := pc_test_id.nextval;
        dbms_output.put_line('PC_TEST id=' || l_id);
        insert into pc_test (id, pc) values (l_id, l_pc);
        sdo_pc_pkg.create_pc(l_pc, 'XYZ');
    end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.

I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17

HT4623 I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?to look for the

I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?

This featue is only available on iphone running ios 5 or later.
Update as you always have, via itunes.
Read the article you linked. the entire article, not just the first part.
iOS: How to update your iPhone, iPad, or iPod touch

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Entry point 'Test Batch' does not exist

Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.

Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer

"mount point /proc/bus/usb does not exist" -deux

Hi everyone!
I've installed arch 6.0 on a laptop running on the 2.4 SCSI kernel.
Indeed, /proc/bus/usb does not exist. I'm not sure why...
I'm not sure how to get the full directory either.
I've viewed this thread and this thread and followed the advice to change the usb line in my fstab to usbfs /proc/bus/usb usbfs defaults 0 0. I'm not sure what I was expecting, but the problem didn't go away and my /proc/bus/usb did not magically appear afterwards.

ok, I did the update. The usb directory is still not there.
Since I don't have permission to make the directory myself (even as root), I guess I'll call it quits here.
I'm using the arch 7.0 cd now. The problem has gone away.

YTD, QTD and Year grain metrics = ORA-00942: table or view does not exist

Hi everyone,
I'm having a weird issue. I've got some GL data that I want to report on in three different grains: Quarter To Date, Year To Date and Entire Year. For the first two measures, I've setup a time dimension and I'm using the ToDate function. Works perfectly. For the third measure, I select the SUM aggregation and then in the Levels Tab, I go to my time dimension and set the logical level to "Year".
Each measure reports correctly by itself, however, when I join in the three in one report, the who thing blows up on me and gives me an ORA message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
When I only do two of the measures (any two), the report works fine. But it's when I add that third measure in, I get myself in trouble. Additionally, I checked the log file and the report never gets to the point where it generates a physical query. It's only creating a logical query and then it doesn't save the physical query anywhere.
Can anyone explain what the problem is? Why don't these three measures behave well together? What can I do to force them to co-operate?
It seems that the real culprit is the entire year measure. It only behaves well with 1 other measure, but once you get two additional measures, it causes the report to get the ORA error.
Thanks for any help you can give!
-Joe

It turns out I was incorrect that there were no physical queries being generated. They were there in the log files, they had so many SAWITH<number> clauses that I thought they were the logical query (i.e. saw_0, saw_1, etc).
Once I found the physical query, I ran it by hand and also got the table did not exist error. I added in WITH clause by with clause until I got the error to occur. After about an hour of digging, it turned out that a query using a full outer join (about 16 queries in) caused the table does not exist error. I'm not sure what it is about the full outer join that makes Oracle not see the table. When I get some free time I'll dig deeper into that issue.
But once I realized what was going on, I went into the DB connections and disabled FULL OUTER JOINs. No problem now.
Like I said, if I find what caused the original problem (i.e. what syntactically was incorrect about the FULL OUTER JOIN), I'll update this post.
-Joe

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Runtime error in enhancement spot-' mereq_topline does not exists.'

Hi all,
I have implemented an implicit enhancement spot in ME53n.
When i applied break point in enhancement spot and control goes to ebhancement spot in debugging mode, i got purchse requisition number in mereq_topline.
When i tried to use this structure value in code i get runtime error-
' mereq_topline does not exists.'
Can you please guide how to resolve this runtime error.
thanks.
Edited by: Sanjay_lnt on Sep 20, 2010 8:52 AM

Sanjay,
try to delete the enhancement and recreate it
Thanks
Bala Duvvuri

Transfer Structure 2LIS_03_BX_QB does not exist

Hi all,
I got the following error message when transporting infosource 2LIS_03_BX.
"Transfer Structure 2LIS_03_BX_QB does not exist"
Maybe somebody can help me.
Thanks and appreciate that,
-Martin-

hi Martin,
try in dev rsa1->transport connection with infosource 2lis_03_bx as starting point, collection mode 'manual', grouping 'in dataflow before', and click 'source system assignment' (yellow box with x) and make sure r/3 source system is marked. then click execute. it will collect objects, after finish, make sure transfer rules, transf structure and datasource are marked following the infosource. create request and transport.

Destination does not exist (help please)

Background:
- Using Flex Builder 3 plugin for Eclipse
- Downloaded latest BlazeDS release build
- Running Tomcat 6.0.16
=======
First I want to note the samples that come with BlazeDS run
absolutely fine.
So I created a new project in Flex Builder 3. I'm just trying
to get something simple working at first so my one mxml file is as
follows (I stripped out everything except the code in question):
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:RemoteObject id="ro"
destination="enrollmentService"/>
<mx:DataGrid
dataProvider="{ro.getEnrollmentList.lastResult}" width="100%"
height="100%"/>
<mx:Button label="Get Data"
click="ro.getEnrollmentList()"/>
</mx:Application>
=====
I created and EnrollmentService class and I'm sure it's
getting compiled to WEB-INF/class...I see .class file there.
I added the flex folder to the WEB-INF folder. My
remoting-config.xml is as follows (because of problems I specified
a default and repeated it to be sure):
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="enrollmentService">
<properties>
<source>test.service.EnrollmentService</source>
</properties>
<channels>
<channel ref="my-amf"/>
</channels>
</destination>
</service>
My services-config has the following channel defined:
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
My web.xml is a follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD
Web Application 2.3//EN" "
http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>RemoteTest</display-name>
<context-param>
<param-name>flex.class.path</param-name>
<param-value>/WEB-INF/flex/hotfixes</param-value>
</context-param>

<listener>
<listener-class>flex.messaging.HttpFlexSession</listener-class>
</listener>

<servlet>
<servlet-name>MessageBrokerServlet</servlet-name>
<display-name>MessageBrokerServlet</display-name>
<servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
<init-param>
<param-name>services.configuration.file</param-name>
<param-value>/WEB-INF/flex/services-config.xml</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>MessageBrokerServlet</servlet-name>
<url-pattern>/messagebroker/*</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
</welcome-file-list>
</web-app>
====
So I start Tomcat from Eclipse and run the app by clicking
the Run button in Eclipse. The app comes up fine, but when I press
the "Get Data" button. I get the error message below. For the life
of me I don't understand why. I clearly have a default channel AND
I have specified a channel. This is so frustrating...any help would
be greatly appreciate.
====
[RPC Fault faultString="[MessagingError message='Destination
'enrollmentService' either does not exist or the destination has no
channels defined (and the application does not define any default
channels.)']" faultCode="InvokeFailed" faultDetail="Couldn't
establish a connection to 'enrollmentService'"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\AbstractInvoker.as:257
at mx.rpc.remoting.mxml::Operation/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\remoting\mxml\Operation.as:197
at
mx.rpc.remoting::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\remotin g\Operation.as:113]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at
mx.rpc.remoting.mxml::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\re moting\mxml\Operation.as:170]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.rpc::AbstractService/
http://www.adobe.com/2006/actionscript/flash/proxy::callProperty()[E:\dev\3.0.x\frameworks \projects\rpc\src\mx\rpc\AbstractService.as:285
at
FlexJ2EE_test/___FlexJ2EE_test_Button1_click()[C:\Prj\workspace\RemoteTest\flex_src\Remot eTest.mxml:36]

While creating a Flex project using Flex builder, did you
select the server type for your project? If you did not select a
server type for your flex project, did you configure your compiler
to include your services-config.xml using the -services argument?
In your project's compiler settings, add -services
"configurationfiles/services-config.xml" argument to the compiler
arguments. The path should point to your services-config.xml.
If the above mentioned steps were completed and still your
facing problem, can you please try running "clean" on your project.
Hope this helps.

Measuring point does not exist

Similar Messages

Maybe you are looking for