Measuring Point Entry List

Hi,
I need the transaction code to entry measuring point entry list.
I created in IK31 and created Entry list name:as XXXX.
But In which Transaction i enter the readings of different equipments Measuring points?
Plz help me.
Regards,
Chitra.

Hi,
There are three options to craete measuring entry sheet.
1.Equipment Measuring Entry sheet.
2.Function location Measuring Entry sheet.
3.General Measuring Entry sheet.
For entring measrement documents u can use IK34.
Ramesh

Similar Messages

  • Measurement reading entry list

    Hi PM Experts,
    Could some one please tell me how to associate a Measurement Reading Entry List to a PM Order or a Task List. I want the users to fill in few measurement points at the completion of a work order. I can club them in to one Meas. Reading Entry List.
    But dont know how to link it to Order
    Cheers
    Deepal

    Hi Maheshwaran,
    with referance to your reply,
    If you create notification, while raising request or malfunction report, measurement document will be created. So SAP has given option to create the Measurement document from Notification.
    Once you complete the work & then while doing confirmation, maintenance people will capture the measurement reading. So in Confirmation, you can create the Measurement document.
    Whats the need to attach measurement document in order / task list?
    Thanks for the reply. Well answering your question at the end. I have few business requirement around recording measuring points associated to PM Work Flow. Inorder to cater to them in the best way I need to understand the concept and application behind Measurement Reading Entry List. Therefore I'd really appreciate if you could let me know in which cases we can/have to use entry list.
    cheers
    Deepal

  • How to see class/characteristics of measuring points in list editing screen

    Dear Sirs,
    I have created meauring points for several functional locations.These measuring points have been assigned classes and characteristics.
    How can I see these charactristics against measuring points in list edition screen(ALV Grid).
    Thanks and Regards,
    R N Sabat.

    Hi R N Sabat,
    As per my knowledge , no std SAP transaction will show you asked details, You need to go for development of this report.
    Please check with your technical team to get this in to ALV report.
    Riyaj

  • Measuring Point Description Change-MassChange

    I have several (hundreds of ) Measuring points which i need to change .The fields to be changed include the Measuring position    and measuring descriptions. Since its a time consuming process to change individual record, can some one suggest any mass change transaction in PM with which i can achieve this changes without much time as in case of individual changes.
    Please suggest some direct method in order to avoid any BDC or LSMW.
    Thanks
    Murad Shaikh

    HI  Murad
    As such there is no standard T code for carrying out mass changes for measuring points except list editing (IK08) through which you can do it by selecting one by one. Since the fields you wants to change are free text type & will vary from one measuring points to other its not logical also. Better to do it through LSMW using recording IK02 its very easy & will take 10min to create one LSMW.
    Shakti

  • Specify measuring points in tha task list

    1. Can i specify measuring points in tha task list. ie. i want to measure some specific reading in preventive mtc. like temperture etc.
    2. can i fill measurement reading through orders like we do in case of notifications.
    pl reply

    Hiii Ravi
    Measurement reading is maintained against measuring poisition for the equipment. So measuring point is assigned to equipment.
    You can create the tasklist for measurement of different reading & you can maintain the reading while making the confirmation of the each activity/operation.
    Against the order you cannot update the measurement document & measuring point cannot be assigned to particular tasklist/task /operation as it is poperty of equipment & not of that task or operation or tasklist.
    I hope this will satisfy your query if not let me know.
    Regards

  • Attaching measurement point in task lists

    Hi experts
    Here we decided to go to measurment points (by valuation codes) rather than tassk lists for prev. maint. As like task list each speific measurment point has to trigger in order based on frequency required. Just user capture the valuation codes at measurment docs. then we cud see the results at IK17.
    But iam not finding the way to do , linking the task lists by prev. orders. can you suggest us

    Hi,
      If you are on ECC 6.0 with EHP4, Measurement points can actually be associated to operations as a PRT on task list or directly on the order. This functionality(Inspection rounds)  has been provided as part of Enterprise asset management continuous improvement under Enterprise Business function set. The measurement points are automatically proposed during the completion confirmation of the relevant operation.
    http://wbhelp.sap.com/ERP2005_EHP_04/helpdata/EN/48/689d3dd2613c87e10000000a42189c/frameset.htm
       if you are not at this level or not plan on getting there in the near future a custom or manual solution is your only option.
    Hope this helps.
    Narasimhan

  • Measurement points list not downloaded in MAM 2.5

    Hi,
    We have recently upgraded our MI server from SP13 to SP14, in which we use MAM 2.5 SR2. After that, we re-generated all SyncBOs and started replication for the timed-2 way ones. We also re-installed the PDA applications
    All seemed to work fine, but now the measurement list points are not being downloaded to the PDAs anymore.
    If we run the function MAM25_041_GETLIST on the backend, the measurement points are returned correctly. Also, when we run transaction MEREP_EX_REPLIC for the SyncBO MAM25_041, it runs with no error and returns many records (more than 50000) with action ADD and around 150 with action MODIFY.
    Does anybody know what the problem might be?
    Thanks,
    Daniel

    Hi Joy,
    you can refer the Table 2 .
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix.pdf
    Yes, Device pack needs to be installed in all servers which also requires reboot of servers.
    Further, u need to take snapshot of existing firmwares from Device---Device Settings --device defaults to avoid changing of firmwares for other models.
    regds,
    aman

  • Entry list number

    Dear Experts,
    I am preparing one Z report on measuring points and documents and just want to confirm that are we assigning entry list number to any equipment or functional location ?
    My report req is client want to capture the measuring points which has no documents entered by user, any soution for this ?
    Regards,
    Ri

    Ripel,
    The entry list is to group the measuring points to ease the data entry operations in a single screen IK34 instead IK11.
    For your client requirement, you may get the measuring point from IMPTT table and pass into IMRG to find no Measurement document entries.
    Babu

  • Measuring points tab repeating the point no for different selection.

    I have selected one entry list and enter into points tab to see the corresponding measuring point .
    Then select one equipment which already in the entry lists tab for an ad hoc entry.  In this case ‘B-781-A-001’
    Now the points tab repeating the points no (below screen shot) which should not be the case it should be sync with the existing points . Even I select one point to take reading it’s only completing the selected one not the similar point in the points tab.
    Please suggest how to solve this data repetition problem.
    Tags edited by: Michael Appleby

    Hi Ranjoy,
    I have updated your tags with the correct information (you will get more responses now).  Please use the tags in the future.  In some communities with narrowly focused topics, they are not as important as they are in SAP for Mobile.  This community receives questions on SUP, SMP, Afaria, Agentry, HWC, MBO, Kapsel, Cordova, SAPUI5, and other technologies.  While I suspected that yours was an Agentry based application, it was not too unlikely that it could have been something else.
    Thanks, Mike (Moderator)
    SAP Customer Experience Group - CEG

  • Measuring point update by production order confirmation

    Hi friends,
    I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
    Document MeasUnit has a different dimension to the characteristic unit
    Message no. IR071
    Diagnosis
    The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
    In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
    System Response
    Processing will not be continued.
    Procedure
    Use the possible entries help.
    Please suggest the solution.

    Hello Sir(s)
    i have gone through entire post for the subject related to measuring point auto update from production order confirmation.  I have tried the same but i dont know what i am missing.
    if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity..  i have already maintained standard formulla in prt view.
    my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
    please advice what value should i put as usage in routing master to get actuall counter update.
    Will Highly appreciate your quick reply.
    Snapshots
    Regards.
    Mohammad.

  • Measuring Point & Counter

    Hi PM Gurus,
    Can you tell me about the performance based maitenance :
    1. Measuring Point (M.P.)
    2.Counter
    What are the characterstic units come under the Measuring Point.is it right that only we can give upper and lower limit in M.P not in counters.Also User exit is only created for MP not for counter.
    What are the basic difference between Measuring Point & Counter.
    In both the cases is it necessary to select counter tick mark or only in case of counter ?Is there is any difference while generating the plan
    Regards,
    RC

    Hi Raju,
    You can do this through,
    IMG - Maintenance Plan,work center, task list & PRTS - Maintenance Plan - Set maintenance plan catagories.
    Here in call object column you can define which type of call object you want for your maintenance order based on this you will get the order or notification as a call object.
    And rest of the things measuring point & counter that already defined in this thread.
    Regards,
    Rip

  • Measuring Point - remove characteristic

    Ladies and Gents,
    I have created a measuring point and have assigned a characteristic to it.  I have then saved it and went back to change mode.  I cannot seem to change the characteristic anymore as the field is grayed out.  I have checked the config and all the menus and cannot see a way of re-enabling that field. 
    Could someone please provide some guidance on how I could change / remove the characteristic on a measuring point?
    Thanks
    Mantas

    thyagarajan,
    I seem to be reaching the same conclusion after numerous discussions with my colleagues.  Would you have a reference to documentation somewhere to support your conclusion?
    Keshav Reddy,
    Either:
    1.  Create a measuring point (IK01) setting a numeric characteristic.
    2.  Modify an existing measuring point (IK02) - characteristic field should be grayed out.
    My question was - why is this field grayed out and how could we go about removing the characteristic / modifying it without having to modify the entries in the database tables.
    Kind Regards,
    Mantas

  • Measuring Point  / Counter button

    Hi,
    How to hide / display Measuring point & Counters button in Header data of Reference Functional Location(IL11).(Organisation data).
    Thanks & Regards,
    Santhosh

    Dear Santhosh,
    Try with Screen variant(SHD0). Else, you can achieve this by implementing a proper BAdi/Enhancement, if there is one.
    If not, you can achieve this by modification, but, it is <b>not recommended by SAP</b>.
    Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
    REPORT ZTEST.
    TABLES: TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA: FIELD1(30).
    DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS: P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA: WA_TADIR TYPE TADIR.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    ENDCASE.
    Alternatively, you can do the following:
    1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
    4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
    ull get a list of Enhancements related to that Componene....
    5. Choose which ever enhancement will suit ur business need ..
    6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
    For a user exit......
    Finding whether there is any User Exit or not for tcode VA42
    1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
    2. Double click on to the program name and go inside the program (Abap editor)
    3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
    Reward points if this is helpful.
    Regards,
    Naveen.

  • BAPI for Order Confirmation along with measurement reading entry

    Hello Experts,
    I would like to know if there is any BAPI for PM Order completion Confirmation along with measurement reading entry?
    Thanks in advance.

    [BAPI for TECO|Function Module for TECO(technically complete) a maintenance work order;
    [BAPI to create Measurement document|BAPI or Function Module for creating measuring point;
    Based on the business transaction, by using user exit, you can accomplish these.

  • Question about Measuring Point / Couter

    Dear PM Guru,
    While creating my Maintenance Plan with tcode -IP42 , there's counter automatically appear in the plan.
    I under this counter is from measuring point.
    I am confuse with the Counter in all this tcode IP41 , IP42 & IP01.
    My question are :
    Is this measuring point / counter master data or technical object ?
    Where's the relationship for counter in Maintenance plan ?
    Any impact the counter with the cycles used in the item line?
    What 's the different between IP01 vs IP41 vs IP42?
    Appreciate your input from any PM Guru.
    TQ

    Hi Venu,
    Thank for your reply.
    Understand that In Performance-based Maintenance Plan, SAP automatically links Counter to the Maintenance Plan.
    After my personal investigation , fully understand that only performance based maintenance plan are using counter. Normal Maintenance Order will not use counter as Master data.
    Example Performance Based Plans :
    When the measuring point counter reaches 3000 -1st  order should get generated
    2nd one at 6000, 3 rd one at 9000 etc...
    Or
    1. Single Cycle with counter -- Ex . Maintenance every 3000 hrs
    2. Strategy Cycle plans.. -- Ex. Maintenance every 3000 hrs and every 6000hrs
    3. Multiple Counter Plans..-- Ex Maintenance every 2month  or 1year..
    Process Flow.
    Create equipment with suitable measuring point (inc annual estimate) with Tcode IK01 create measuring point
    Create initial counter reading measurement document
    Create task list (optional for single-cycle plan)
    Create counter based maintenance plan
    Scheduling maintenance plan (IP10/IP30)
    Create measurement documents periodically
    Little Question to ask.
    1) Is this the SAP standard flow ?
    Please correct me if i am wrong.
    Thank you.

Maybe you are looking for

  • Firefox crashes when I open it but there is no error message or report

    Upgraded to latest version and worked fine. Today, as soon as I open Firefox it starts to load the homepages and then crashes without any error message or report. Tried to restart PC but problem remains unchanged. Thanks for your help.

  • Stanza and my videos no longer work after upgrade to iOS5?

    I upgraded to iOS5 on my 3GS. Problem 1:Now Stanza just hangs and I get a null error. The books are also gone from iBooks (They both had the same titles - I use Stanza to read at night because of the night view option.) I imagine this has something t

  • MOSS 2007 - Delete recycle bin for 10 personal sites - HOW???

    Hi all I need to delete the First and Second stage Recycle bin for all of our personal sites, as the total size of these has somehow exceeded 140GB. I am however stuck as to how to do this. I have tried lots of Powershell scripts to get this done, bu

  • What will she see on her mobile screen?

    Hello, I would like to know what shows on the mobile phone screen of the person I am calling through Skype (Skype to Mobile number Not in the USA): 1) I have no caller ID configured and I want to keep it this way. 2) I have no Skype number. I just bo

  • Issue using SImpleDateFormat

    I am trying to use SimpleDateFormat to convert my date and time string that I have to a util.date. Here is the code snippet: // declaring testDate java.util.Date testDate = null; // Using to parse the string into a datetime field SimpleDateFormat for