Measuring point External Number range
Dear Masters,
I am trying to create the external number range for one of my measuring point type. Is it not possible to do so? If no why? If yes how?
Thanks to all in advance.
Hello Vaibhav,
I have already followed the steps given by you only I cannot find the assignment of measuring point category to the number range. I have also done the number range assignment for equipment and functional location but there it exists here it does not.
It is also showing me the error of external number while creating the new measuring point. Please do guide about the assignment to the number range.
Thanks again.
Similar Messages
-
SAP PM: Measuring Point External Number
Dear Sir,
Is it Possible to assign Extenal number to Measuring Point?
Regards,
MohanHi,
I dont think there is a way for your requirement. Anyhow the following Enhancements are available for Measuring points/Document. You could check,
Exit name
Short text
IMRC0001
MeasPoint/MeasDoc: Exit before update (after COMMIT WORK)
IMRC0002
MeasPoint: Menu exit for customer-specific function
IMRC0003
MeasDoc: Menu exit for customer-specific function
IMRC0004
Measure.doc.:Exit according to stndrd checks for new mes.doc
IMRC0005
Measure point: Exit in AUTHORITY_CHECK_IMPT
|----
Hope this may be useful for you,
Regards,
Prasobh -
External number range for measuring point
Hi experts,
How to assign external number range for measuring point ?
Regards
ShashiI have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
SAP documentation as follows:
Create Number Ranges for Measuring Points
In this step you define number ranges for measuring points.
Notes
As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
Jim
Edited by: JamesPetrie on Feb 28, 2012 2:45 PM -
How to change internal number range into external number range
Hi All,
There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
Quick reply will be appreciated & points will be assigned.
Thanks & Regards,hi Mehak,
you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
hope this helps
ec -
Sd invoices posting with External number range
Hi,
i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number range?
while posting it is giving error like use internal number range.how to over come this.help me
Thanks
PrathimaGood Afternoon Prathima.
Use tcode OBA7
Look for Doc type RV Billing Doc trn.
This doc is generally used for posting Billing doc to accounting.
Here you would find Number range as external.
Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
Hope it solved your query. Kindly reward.
Take care. JP. -
External number ranges in asset accounting
Hi All
Why we need to select external number range for asset accounting number ranges why not other sub modules?
useful answers will be rewarded with points
Regards
Prasadhi hariprasad,
you only have to do that for depreciation posting. the reason for that is the way the program which posts the depreciation is designed. it creates a batch input with the opstings adding the doucment numbers as well and saving these document numbers into a table. when you want to post the depreciation for next month (period), first it will check if documents are already posted for previous period (or forgotten there in the batch input session). this is only valid before 4.7 (or 5.0?), from that release depreciation is also posted with internal numbered documents.
hope this helps
ec -
Some external number range are not valid for equipment creation
Hi All,
What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
Waiting for your valuable inputs..
Thanks
SuryaHi
As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
Regards,
Rakesh -
2 external number range for vendor
Hello,
I am facing a problem when I try to replicate vendor from R/3.
I have 2 external vendor number ranges maintained in SRM, But only the last created external number range is taken into account when i replicate vendors from R/3.
Please could you tell me how can I maintain 2 external number ranges in SRM?
This is very urgent, I need to replicate vendors from R/3.
SRM 4.0 Extended Classic scenario.
Regards,
ShaiekHi Lina
You will have to combine all number ranges in R/3 and create one number range in SRM, if you want to retain the R/3 numbers.
e.g. If your R/3 number ranges are
100000 - 200000
600000 - 699999
In SRM, you need 100000-699999 as the external number range.
At any point of time, you can make only one no. range as default in SRM.
Best regards
Ramki -
Exit for assigning external number range to sales document
hello friends,
can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
plz reply as soon as possible .
thanks and regards,
siriHi Sirisha,
I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of VA01 or saving the document.
The number range is linked to the order type (VBAK-AUART), this is done in customizing.
For different sales area it need to have different number ranges for the same order type.
Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
Regards,
Naresh
****Please do reward points if found useful -
External number range for rebate agreement
hi experts !!!
can we give
external number range for rebate agreement
e.g . ab0039
this number i want give for one of rebate agerrment
please guide
and is it possible the customer no and rebate agreement no are same
ponts will be rewardthanks friend
i already did this by creating external number range AAA -
ZZZZZZZ
and system allow me to give no like AB0056
and if now i create new record by VBO1
IF i give external no system accept
AND if i don't give system generate his own no
can u tell me exactly where i have to assign this number
but there is no number object LIKE in t.code VNO1 there is no 01 or 18 so that i can mention in sales document type
like......
so how and where i have to assign
points will reward -
Material Master External Number Range problem
Material Master External Number Range that allows numerics only and combo of numerics, Alpha and Characters
I have the following issue. My client wants to use a purely External Numbering System in SAP
- They only use one Material Type (HALB).
The range must be able to manage material numbers that:
1. Are up to 18 CHAR
2. Have Leading Zero's(Numeric Only) - example 0123, 0000223, etc
3. Purely numeric (no zeros) - ex 56788, 1235456
4. Have Leading Zero's with (Alpha Numeric) - ex 00A456
5. Alpha numeric (No Zeros) ex T123542
6. Leading Zero's with a '.' in the Mat Number
Four examples
005.009.23
0000A.123.5544 M1
000.593.33234
0.1234
I have the Lexiographical Setting Checked
Leading Zero's Checked
Range is - 000000000000000000 to ZZZZZZZZZZZZZZZZZZ
The issue I have is with the last two examples in 6 above 'Leading zero's with a '.' in the Mat Number.
It seems the system has an issue with zero's then a decimal point without having another number of letter in between. It will allow 00000002.1223 but not 000000.1223. The only way I can get the system to take the leading zero then '.' entries is to check 'X' the 'External Number Assignment w/o Check in the Material Type HALB. When I do that I am no longer allowed to create purely numeric numbers. Any help?
Creating another material type is not an option. Also the '.' can be in any position in the layout.
Thanks in Advance!
--ChrisASCII and UNICODE values of period (.) are lower that 0.
Solution: Change your number range like this
From
Range is - 000000000000000000 to ZZZZZZZZZZZZZZZZZZ
To
Range is - - - - - - - - - - - - - - - - - - to ZZZZZZZZZZZZZZZZZZ
(replace zeroes with hyphen, because the value of hyphen is lower than period)
[ASCII table|http://www.asciitable.com/] for reference.
Edited by: Jeevan Sagar on Nov 29, 2011 1:04 PM -
Purchase Order (PO) Inbound with external number range
We need to create a interface for Purchase order Inbound.
The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
We have allowed PO with external number range.
I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
Points will be offered for useful informations.
Thanks,
SivaramanHi Sivaraman,
could you tell me how you solved it. I have the
same problem and didn't find the solution yet.
Thanks a lot!
Horst -
How to assign numbers in external number range?
Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AMWith external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.
-
Creation of HU in auto mode with external number range
Dear Experts,
I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER Change Handling Unit Header Data
BAPI_HU_CREATE Create Handling Unit with Items
BAPI_HU_DELETE BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY Displays HU History
BAPI_HU_GETLIST Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG Select Handling Unit Output
BAPI_HU_PACK BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT Select and Process Handling-Unit Outputs
BAPI_HU_REPACK Repack HUs and HU Items
BAPI_HU_UNPACK BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY Display an HU in Dialog Mode
=================================== -
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
HI ALL
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
PLEASE GIVE ME SPOON FEEDING
IT IS VERY URGENT FOR ME
PLEASE PLEASE AND PLEASE
REGARDSok i understood u want the img path for maintaing
positions ,jobs , Org units
Path:IMG->Personnel Mgmt->OM->Basic Setting->Maintain Number ranges.
IMG go to Personnel Management -> Organizational Management -> Basic Settings
-> Maintain Number Ranges.
Select subgroup $$O to maintain number range for Org Unit and click on Number range Maintenance. Then click on change Intervals. Now you can create both internal and external number range for Org Unit according to your requirement.
Similarly for Position select subgroup $$S and follow the same process.
Edited by: Sikindar on Feb 7, 2008 11:23 AM
Edited by: Sikindar on Feb 7, 2008 11:28 AM
Maybe you are looking for
-
Ipod wont start up after 5.1.1 update
after updateing to new version of itunes and to ios 5.1.1 my ipod wont boot up all i get is a black screen with white spining clock, computer finds the device and so does itunes but its not leting me restore to an back up or factory settings as itune
-
Issue with Aperture full screen mode on HD 5870
I have a very strange problem with Aperture, which may be linked to the HD 5870 and it's probably faulty drivers and would be very grateful if somebody with the same hardware could try this out if he/she can replicate this behavior: I have a brand ne
-
SC Approval mail Language - other than mentioned in Offline report
Hi All, I have an issue with the approval mails. In the offline approval /SAPSRM/OFFLINEAPPROVALSEND email language was set as English. However system is sending mails with user local language. Like if user belongs to germany then mail was triggered
-
I'm obviously aware of the possibility to show/hide the Navitation Toolbar manually, but I'd like to have it done automatically to get the best of screen space and navigation ease.
-
Hello, I am relatively new to the Mac family, so please excuse my newby question. I had a Canon multi-function device that I had installed on my MBP. The printer/device is terrible so I bought a new printer, but wanted to get rid of all of the Canon